1039 files changed, 592664 insertions, 0 deletions

diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/ant_advanced_burst.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/ant_advanced_burst.c
new file mode 100644
index 0000000..22073d9
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/ant_advanced_burst.c
@@ -0,0 +1,325 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#include "ant_advanced_burst.h"
+#include <stdint.h>
+#include "string.h"
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "app_error.h"
+#include "ant_error.h"
+#include "boards.h"
+#include "sdk_config.h"
+#include "ant_channel_config.h"
+#include "nrf_soc.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+
+// Miscellaneous defines.
+#define BURST_PACKET_SIZE       8u                              ///< The burst packet size, in bytes.
+#define BURST_PACKET_TOTAL_SIZE (BURST_PACKET_SIZE + 1u)        ///< The burst packet total size in bytes, including channel number/sequence number.
+
+#define BURST_TOTAL_PACKETS     1024u                           ///< Total size of burst data to send.
+#define BURST_BLOCK_SIZE        NRF_SDH_ANT_BURST_QUEUE_SIZE    ///< Burst block size, in number of bytes.
+
+
+#define APP_ANT_OBSERVER_PRIO   1                               ///< Application's ANT observer priority. You shouldn't need to modify this value.
+
+static uint8_t  m_sequence_number;                ///< Burst sequence number.
+static uint8_t  m_burst_data[BURST_BLOCK_SIZE];   ///< Burst buffer.
+static uint32_t m_bytes;                          ///< Counter for number of transmitted bytes.
+static uint8_t  m_counter;                        ///< Counter for populating dummy data.
+static bool     m_burst_rx;                       ///< Flag to indicate if we are receiving a burst.
+
+
+/**@brief Fill burst buffer with dummy data
+ *
+ * @param[in] p_ buffer Pointer to the burst buffer.
+ * @param[in] size      Size of the burst buffer.
+ */
+static void burst_buffer_fill(uint8_t * p_buffer, uint16_t size)
+{
+    // Fill up burst buffer with dummy data
+    for (uint8_t i = 0; i < size; i++)
+    {
+        p_buffer[i] = m_counter;
+        m_counter++;
+    }
+}
+
+
+/**@brief Function to send burst data
+ */
+static void burst_data_send(void)
+{
+    uint32_t err_code;
+    uint8_t  burst_segment = BURST_SEGMENT_CONTINUE;
+    uint8_t  bytes_to_send = BURST_BLOCK_SIZE;
+
+    if (m_bytes >= BURST_TOTAL_PACKETS * BURST_PACKET_SIZE)
+    {
+        // There is no more data to send
+        return;
+    }
+
+    if (m_bytes == 0)
+    {
+        // This is the first block
+        burst_segment = BURST_SEGMENT_START;
+    }
+
+    if ((BURST_TOTAL_PACKETS * BURST_PACKET_SIZE - m_bytes) <= BURST_BLOCK_SIZE)
+    {
+        // This is the last block
+        burst_segment |= BURST_SEGMENT_END;
+        bytes_to_send  = BURST_TOTAL_PACKETS * BURST_PACKET_SIZE - m_bytes;
+    }
+
+    memset(m_burst_data, 0, BURST_BLOCK_SIZE);
+    burst_buffer_fill(m_burst_data, bytes_to_send);
+
+    err_code = sd_ant_burst_handler_request(ANT_CHANNEL_NUM,
+                                            bytes_to_send,
+                                            m_burst_data,
+                                            burst_segment);
+    APP_ERROR_CHECK(err_code);
+    m_bytes += bytes_to_send;
+}
+
+
+/**@brief Function to handle received burst data
+ *
+ * @param[in] p_burst_message  Buffer containing burst message, including channel/sequence number.
+ */
+static void burst_data_process(uint8_t * p_burst_message)
+{
+    // If this is the first packet
+    if ((p_burst_message[0] & SEQUENCE_NUMBER_MASK) == SEQUENCE_FIRST_MESSAGE)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_0);  // Turn on LED 0 to indicate burst started
+        bsp_board_led_off(BSP_BOARD_LED_1); // Clear error indication
+        m_burst_rx = true;
+    }
+    else if ((p_burst_message[0] & SEQUENCE_LAST_MESSAGE) != 0) // If this is the last packet
+    {
+        bsp_board_led_off(BSP_BOARD_LED_0);   // Turn off LED 0 to indicate burst ended
+        m_burst_rx = false;
+    }
+    // The burst data is available in p_burst_message[1] to p_burst_message[8]
+}
+
+
+void ant_advanced_burst_setup(void)
+{
+    uint32_t err_code;
+
+    m_counter  = 0;
+    m_bytes    = 0;
+    m_burst_rx = false;
+
+    ant_channel_config_t channel_config =
+    {
+        .channel_number    = ANT_CHANNEL_NUM,
+        .channel_type      = CHANNEL_TYPE_MASTER,
+        .ext_assign        = 0x00,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .device_number     = (uint16_t) (NRF_FICR->DEVICEID[0]),
+        .channel_period    = CHAN_PERIOD,
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    uint8_t adv_burst_config[] =
+    {
+        ADV_BURST_MODE_ENABLE,
+        ADV_BURST_MODES_MAX_SIZE,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0
+    };
+
+#if CONFIGURE_AS_SLAVE
+    channel_config.channel_type  = CHANNEL_TYPE_SLAVE;
+    channel_config.device_number = 0; // Wild card
+#endif
+
+    err_code = ant_channel_init(&channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = sd_ant_adv_burst_config_set(adv_burst_config, sizeof(adv_burst_config));
+    APP_ERROR_CHECK(err_code);
+
+    err_code = sd_ant_channel_open(ANT_CHANNEL_NUM);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+void ant_advanced_burst_bsp_evt_handler(bsp_event_t evt)
+{
+    switch (evt)
+    {
+        case BSP_EVENT_KEY_0:
+            // Do not start a new burst if there is one in progress
+            if (m_bytes == 0 && !m_burst_rx)
+            {
+                m_counter = 0;
+                burst_data_send();
+            }
+            break;
+
+        default:
+            return; // no implementation needed
+    }
+}
+
+
+/**
+ * @brief Function for handling ANT events.
+ *
+ * @param[in]   p_ant_evt       Event received from the ANT stack.
+ * @param[in]   p_context       Context.
+ */
+static void ant_evt_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    uint8_t p_burst_message[BURST_PACKET_TOTAL_SIZE];
+
+    switch (p_ant_evt->event)
+    {
+        case EVENT_TRANSFER_TX_START:
+            bsp_board_led_on(BSP_BOARD_LED_0);  // Turn on LED 0 to indicate burst started
+            bsp_board_led_off(BSP_BOARD_LED_1); // Clear error indication
+            break;
+
+        case EVENT_TRANSFER_NEXT_DATA_BLOCK:
+            burst_data_send(); // Send the next block of data
+            break;
+
+        case EVENT_TRANSFER_TX_COMPLETED:
+            bsp_board_led_off(BSP_BOARD_LED_0); // Turn off LED 0 to indicate burst ended
+            m_bytes = 0;
+            break;
+
+        case EVENT_TRANSFER_TX_FAILED:
+            bsp_board_led_off(BSP_BOARD_LED_0); // Turn off LED 0 to indicate burst ended
+            bsp_board_led_on(BSP_BOARD_LED_1);  // Turn on LED 1 to indicate burst failure
+            m_bytes = 0;
+            break;
+
+        case EVENT_TRANSFER_RX_FAILED:
+            bsp_board_led_off(BSP_BOARD_LED_0); // Turn off LED 0 to indicate burst ended
+            bsp_board_led_on(BSP_BOARD_LED_1);  // Turn on LED 1 to indicate burst failure
+            m_burst_rx = false;
+            break;
+
+        case EVENT_RX:
+            switch (p_ant_evt->message.ANT_MESSAGE_ucMesgID)
+            {
+                case MESG_BURST_DATA_ID:
+                    // The first packet of an advanced burst transfer will be a regular burst
+                    // message. If the other end point does not have advanced burst enabled,
+                    // we will receive regular burst messages as well.
+                    p_burst_message[0] = p_ant_evt->message.ANT_MESSAGE_ucChannel;
+                    memcpy(&p_burst_message[1],
+                           p_ant_evt->message.ANT_MESSAGE_aucPayload,
+                           BURST_PACKET_SIZE);
+                    m_sequence_number =
+                        SEQUENCE_NUMBER_MASK & p_ant_evt->message.ANT_MESSAGE_ucChannel;
+                    burst_data_process(p_burst_message);
+                    break;
+
+                case MESG_ADV_BURST_DATA_ID:
+
+                    // If it is an advanced burst message, split it into a series of regular 8-byte
+                    // burst messages so everything can be processed in the same function
+                    for (uint8_t i = 0;
+                         (int32_t)(i * BURST_PACKET_SIZE) < (p_ant_evt->message.ANT_MESSAGE_ucSize - 1);
+                         i++ ) // For each 8-byte packet
+                    {
+                        // Increment the sequence number
+                        if (m_sequence_number == SEQUENCE_NUMBER_ROLLOVER)
+                        {
+                            m_sequence_number = 0;
+                        }
+                        m_sequence_number += SEQUENCE_NUMBER_INC;
+
+                        // Check if it is the last packet
+                        if (((p_ant_evt->message.ANT_MESSAGE_ucChannel & SEQUENCE_LAST_MESSAGE) != 0)
+                            && (((i + 1) * BURST_PACKET_SIZE) ==
+                                (p_ant_evt->message.ANT_MESSAGE_ucSize - 1)))
+                        {
+                            m_sequence_number |= SEQUENCE_LAST_MESSAGE;
+                        }
+
+                        // Package up the burst message data as a regular burst, replacing
+                        // the sequence number.
+                        p_burst_message[0] = m_sequence_number
+                                             | (p_ant_evt->message.ANT_MESSAGE_ucChannel
+                                                & CHANNEL_NUMBER_MASK);
+                        memcpy(&p_burst_message[1],
+                               &p_ant_evt->message.ANT_MESSAGE_aucMesgData[i * BURST_PACKET_SIZE + 1],
+                               BURST_PACKET_SIZE);
+
+                        // Process burst data
+                        burst_data_process(p_burst_message);
+                    }
+                    break;
+            }
+            break;
+
+        default:
+            break; // no implementation needed
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, APP_ANT_OBSERVER_PRIO, ant_evt_handler, NULL);
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/ant_advanced_burst.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/ant_advanced_burst.eww
new file mode 100644
index 0000000..443e97e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/ant_advanced_burst.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_advanced_burst_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_advanced_burst_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/ant_advanced_burst.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/ant_advanced_burst.h
new file mode 100644
index 0000000..ee0e109
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/ant_advanced_burst.h
@@ -0,0 +1,78 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#ifndef ANT_ADVANCED_BURST_H__
+#define ANT_ADVANCED_BURST_H__
+
+#include <stdint.h>
+#include "bsp.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@brief Function for configuring channel for advanced burst
+ *
+ */
+void ant_advanced_burst_setup(void);
+
+
+/**@brief Handles BSP events.
+ *
+ * @param[in] evt   BSP event.
+ */
+void ant_advanced_burst_bsp_evt_handler(bsp_event_t evt);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // ANT_ADVANCED_BURST_H__
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/ant_advanced_burst_test.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/ant_advanced_burst_test.xml
new file mode 100644
index 0000000..7db18b3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/ant_advanced_burst_test.xml
@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:2016-02-05 12:09:16-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup />
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">0</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">34</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">35</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">36</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">37</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">38</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">39</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">40</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/arm4/ant_advanced_burst_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/arm4/ant_advanced_burst_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/arm4/ant_advanced_burst_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/arm4/ant_advanced_burst_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/arm4/ant_advanced_burst_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..3904a11
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/arm4/ant_advanced_burst_d52_starterkit_s212.uvproj
@@ -0,0 +1,554 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_advanced_burst.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_advanced_burst.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/arm5_no_packs/ant_advanced_burst_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/arm5_no_packs/ant_advanced_burst_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/arm5_no_packs/ant_advanced_burst_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/arm5_no_packs/ant_advanced_burst_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/arm5_no_packs/ant_advanced_burst_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..3ce13a2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/arm5_no_packs/ant_advanced_burst_d52_starterkit_s212.uvprojx
@@ -0,0 +1,578 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_advanced_burst.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_advanced_burst.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..70179c6
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,186 @@
+PROJECT_NAME     := ant_advanced_burst_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_advanced_burst_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_advanced_burst.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/armgcc/ant_advanced_burst_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/armgcc/ant_advanced_burst_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/armgcc/ant_advanced_burst_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..fb3c9db
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3929 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <q> CONFIGURE_AS_SLAVE  - Configure channel as a slave.
+ 
+
+#ifndef CONFIGURE_AS_SLAVE
+#define CONFIGURE_AS_SLAVE 0
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/iar/ant_advanced_burst_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/iar/ant_advanced_burst_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/iar/ant_advanced_burst_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/iar/ant_advanced_burst_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/iar/ant_advanced_burst_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..74e1012
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/iar/ant_advanced_burst_d52_starterkit_s212.ewp
@@ -0,0 +1,1078 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_advanced_burst_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_advanced_burst_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_advanced_burst_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_advanced_burst.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/iar/ant_advanced_burst_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/iar/ant_advanced_burst_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/iar/ant_advanced_burst_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/ses/ant_advanced_burst_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/ses/ant_advanced_burst_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..593a348
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/ses/ant_advanced_burst_d52_starterkit_s212.emProject
@@ -0,0 +1,107 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_advanced_burst_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_advanced_burst_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_advanced_burst.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/ses/ant_advanced_burst_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/ses/ant_advanced_burst_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..e8b6bb6
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/ses/ant_advanced_burst_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_advanced_burst_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/main.c
new file mode 100644
index 0000000..2e085e5
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/main.c
@@ -0,0 +1,134 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/*
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdint.h>
+#include "nrf.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "bsp.h"
+#include "boards.h"
+#include "hardfault.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+#include "ant_advanced_burst.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+/**@brief Function for the Timer and BSP initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                        ant_advanced_burst_bsp_evt_handler);
+
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for ANT stack initialization.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    ant_advanced_burst_setup();
+
+    NRF_LOG_INFO("ANT Advanced Burst example started.");
+
+    // Enter main loop
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/arm4/ant_advanced_burst_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/arm4/ant_advanced_burst_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/arm4/ant_advanced_burst_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/arm4/ant_advanced_burst_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/arm4/ant_advanced_burst_pca10040_s212.uvproj
new file mode 100644
index 0000000..7eb7a6a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/arm4/ant_advanced_burst_pca10040_s212.uvproj
@@ -0,0 +1,551 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_advanced_burst.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_advanced_burst.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/arm5_no_packs/ant_advanced_burst_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/arm5_no_packs/ant_advanced_burst_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/arm5_no_packs/ant_advanced_burst_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/arm5_no_packs/ant_advanced_burst_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/arm5_no_packs/ant_advanced_burst_pca10040_s212.uvprojx
new file mode 100644
index 0000000..a89a344
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/arm5_no_packs/ant_advanced_burst_pca10040_s212.uvprojx
@@ -0,0 +1,575 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_advanced_burst.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_advanced_burst.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..b0ee1fc
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,189 @@
+PROJECT_NAME     := ant_advanced_burst_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_advanced_burst_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_advanced_burst.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/armgcc/ant_advanced_burst_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/armgcc/ant_advanced_burst_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/armgcc/ant_advanced_burst_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..104c296
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3873 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <q> CONFIGURE_AS_SLAVE  - Configure channel as a slave.
+ 
+
+#ifndef CONFIGURE_AS_SLAVE
+#define CONFIGURE_AS_SLAVE 0
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/iar/ant_advanced_burst_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/iar/ant_advanced_burst_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/iar/ant_advanced_burst_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/iar/ant_advanced_burst_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/iar/ant_advanced_burst_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/iar/ant_advanced_burst_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/iar/ant_advanced_burst_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/iar/ant_advanced_burst_pca10040_s212.ewp
new file mode 100644
index 0000000..8a75c7b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/iar/ant_advanced_burst_pca10040_s212.ewp
@@ -0,0 +1,1081 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_advanced_burst_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_advanced_burst_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_advanced_burst_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_advanced_burst.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/ses/ant_advanced_burst_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/ses/ant_advanced_burst_pca10040_s212.emProject
new file mode 100644
index 0000000..5ff5bf3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/ses/ant_advanced_burst_pca10040_s212.emProject
@@ -0,0 +1,106 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_advanced_burst_pca10040_s212" target="8" version="2">
+  <project Name="ant_advanced_burst_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_advanced_burst.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/ses/ant_advanced_burst_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/ses/ant_advanced_burst_pca10040_s212.emSession
new file mode 100644
index 0000000..7e970a1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/ses/ant_advanced_burst_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_advanced_burst_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_advanced_burst/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/ant_async_transmitter.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/ant_async_transmitter.eww
new file mode 100644
index 0000000..bddd846
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/ant_async_transmitter.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_async_transmitter_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_async_transmitter_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/ant_async_transmitter_test.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/ant_async_transmitter_test.xml
new file mode 100644
index 0000000..a11c38d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/ant_async_transmitter_test.xml
@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:2016-03-02 15:58:05-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup />
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">0</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">34</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">35</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">36</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">37</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">38</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">39</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">40</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/ant_async_tx.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/ant_async_tx.c
new file mode 100644
index 0000000..537c38e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/ant_async_tx.c
@@ -0,0 +1,240 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#include "ant_async_tx.h"
+#include <stdint.h>
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "app_timer.h"
+#include "app_error.h"
+#include "boards.h"
+#include "sdk_config.h"
+#include "ant_channel_config.h"
+#include "ant_search_config.h"
+#include "nrf_soc.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+
+// Application specific commands
+#define COMMAND_PAGE                   0x01                               /**< Page number for command data */
+#define COMMAND_0                      0x10                               /**< Command associated with pressing BSP_BUTTON_0 */
+#define COMMAND_1                      0x11                               /**< Command associated with pressing BSP_BUTTON_1 */
+
+// Retry configuration
+#define MAX_RETRIES                    8                                  /**< Maximum number of retries for sending a command */
+#define MIN_BACKOFF_TIME               20                                 /**< Minimum number of ms to wait before next retry attempt. The maximum back off time is 255 + MIN_BACKOFF_TIME */
+
+#define APP_ANT_OBSERVER_PRIO          1                                  /**< Application's ANT observer priority. You shouldn't need to modify this value. */
+
+static uint8_t  m_cmd_tx_buffer[ANT_STANDARD_DATA_PAYLOAD_SIZE];          /**< Command data transmit buffer */
+static uint8_t  m_retries;                                                /**< Number of remaining retries */
+static uint8_t  m_sequence_number;                                        /**< Sequence number */
+
+APP_TIMER_DEF(m_backoff_timer);                                           /**< Back off timer */
+
+
+/**@brief Perform message retries
+ *
+ */
+static void retry_perform(void)
+{
+    if (m_retries > 0)
+    {
+        uint32_t err_code = sd_ant_acknowledge_message_tx(ANT_CHANNEL_NUM,
+                                                          ANT_STANDARD_DATA_PAYLOAD_SIZE,
+                                                          m_cmd_tx_buffer);
+        if (err_code != TRANSFER_IN_PROGRESS)
+        {
+            // Transfer in progress means that a message is waiting to be transmitted by ANT as an ACK.
+            // Ignore this error; attempts to initiate a burst transfer while already busy handling one
+            // will be ignored.
+            APP_ERROR_CHECK(err_code);
+        }
+
+        m_retries--;
+    }
+}
+
+
+/**@brief Send command over async channel
+ *
+ * @param[in] command   Command to send
+ */
+static void async_command_send(uint8_t command)
+{
+    m_cmd_tx_buffer[0] = COMMAND_PAGE;
+    m_cmd_tx_buffer[1] = 0xFF;
+    m_cmd_tx_buffer[2] = 0xFF;
+    m_cmd_tx_buffer[3] = 0xFF;
+    m_cmd_tx_buffer[4] = 0xFF;
+    m_cmd_tx_buffer[5] = 0xFF;
+    m_cmd_tx_buffer[6] = m_sequence_number;
+    m_cmd_tx_buffer[7] = command;
+    m_retries          = MAX_RETRIES;
+    m_sequence_number++;
+    retry_perform();
+}
+
+
+/**@brief Handler for backoff timer event
+ *
+ * @param[in] p_context   Pointer to context
+ */
+static void backoff_timer_evt_handler(void * p_context)
+{
+    retry_perform();
+}
+
+
+/**@brief Function for generating a random number using the RNG
+ * The number generated is between [MIN_BACKOFF_TIME, 255 + MIN_BACKOFF_TIME] (inclusive)
+ *
+ */
+static uint16_t rnd_backoff_generate(void)
+{
+    uint8_t  rand_bytes[1]   = {0};
+    uint8_t  bytes_available = 0;
+    uint32_t err_code;
+    uint16_t rand_value;
+
+    while (bytes_available < 1)
+    {
+        err_code = sd_rand_application_bytes_available_get(&bytes_available);
+        APP_ERROR_CHECK(err_code);
+    }
+
+    err_code = sd_rand_application_vector_get(rand_bytes, 1);
+    APP_ERROR_CHECK(err_code);
+
+    rand_value = (uint16_t) (rand_bytes[0]) + MIN_BACKOFF_TIME;
+
+    return rand_value;
+}
+
+
+void ant_async_tx_setup(void)
+{
+    uint32_t err_code;
+
+    ant_channel_config_t channel_config =
+    {
+        .channel_number    = ANT_CHANNEL_NUM,
+        .channel_type      = CHANNEL_TYPE_MASTER,
+        .ext_assign        = EXT_PARAM_ASYNC_TX_MODE | EXT_PARAM_FAST_INITIATION_MODE,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .device_number     = (uint16_t) (NRF_FICR->DEVICEID[0]),
+        .channel_period    = CHAN_PERIOD,
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    err_code = ant_channel_init(&channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    m_retries         = 0;
+    m_sequence_number = 0;
+
+    err_code = app_timer_create(&m_backoff_timer,
+                                APP_TIMER_MODE_SINGLE_SHOT,
+                                backoff_timer_evt_handler);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+void ant_async_tx_bsp_evt_handler(bsp_event_t evt)
+{
+    switch (evt)
+    {
+        case BSP_EVENT_KEY_0:
+            bsp_board_led_invert(BSP_BOARD_LED_0);
+            async_command_send(COMMAND_0);
+            break;
+
+        case BSP_EVENT_KEY_1:
+            bsp_board_led_invert(BSP_BOARD_LED_0);
+            async_command_send(COMMAND_1);
+            break;
+
+        default:
+            return; // no implementation needed
+    }
+}
+
+
+void ant_async_tx_event_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    switch (p_ant_evt->event)
+    {
+        case EVENT_TRANSFER_TX_COMPLETED:
+            // The message was successfully transmitted
+            m_retries = 0;
+            break;
+
+        case EVENT_TRANSFER_TX_FAILED:
+            // The message failed; attempt a retry after a random backoff period
+            if (m_retries > 0)
+            {
+                uint32_t backoff_time = (uint32_t) rnd_backoff_generate();
+
+                uint32_t err_code =
+                    app_timer_start(m_backoff_timer,
+                                    APP_TIMER_TICKS(backoff_time),
+                                    NULL);
+                APP_ERROR_CHECK(err_code);
+            }
+            break;
+
+        default:
+            break;
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, APP_ANT_OBSERVER_PRIO, ant_async_tx_event_handler, NULL);
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/ant_async_tx.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/ant_async_tx.h
new file mode 100644
index 0000000..c0a0962
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/ant_async_tx.h
@@ -0,0 +1,79 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#ifndef ANT_ASYNC_TX_H__
+#define ANT_ASYNC_TX_H__
+
+#include <stdint.h>
+#include "bsp.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/**@brief Function for configuring an asynchronous transmitter
+ *
+ */
+void ant_async_tx_setup(void);
+
+
+/**@brief Handles BSP events.
+ *
+ * @param[in] evt   BSP event.
+ */
+void ant_async_tx_bsp_evt_handler(bsp_event_t evt);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // ANT_ASYNC_TX_H__
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/arm4/ant_async_transmitter_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/arm4/ant_async_transmitter_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/arm4/ant_async_transmitter_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/arm4/ant_async_transmitter_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/arm4/ant_async_transmitter_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..47b6fba
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/arm4/ant_async_transmitter_d52_starterkit_s212.uvproj
@@ -0,0 +1,557 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_async_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_async_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/arm5_no_packs/ant_async_transmitter_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/arm5_no_packs/ant_async_transmitter_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/arm5_no_packs/ant_async_transmitter_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/arm5_no_packs/ant_async_transmitter_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/arm5_no_packs/ant_async_transmitter_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..aac2a12
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/arm5_no_packs/ant_async_transmitter_d52_starterkit_s212.uvprojx
@@ -0,0 +1,581 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_async_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_async_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..acc2ddc
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,188 @@
+PROJECT_NAME     := ant_async_transmitter_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_async_transmitter_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_async_tx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/armgcc/ant_async_transmitter_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/armgcc/ant_async_transmitter_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/armgcc/ant_async_transmitter_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..39325ec
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3943 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/iar/ant_async_transmitter_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/iar/ant_async_transmitter_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/iar/ant_async_transmitter_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/iar/ant_async_transmitter_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/iar/ant_async_transmitter_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..3a98410
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/iar/ant_async_transmitter_d52_starterkit_s212.ewp
@@ -0,0 +1,1081 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_async_transmitter_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_async_transmitter_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_async_transmitter_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_async_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/iar/ant_async_transmitter_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/iar/ant_async_transmitter_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/iar/ant_async_transmitter_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/ses/ant_async_transmitter_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/ses/ant_async_transmitter_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..356f55c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/ses/ant_async_transmitter_d52_starterkit_s212.emProject
@@ -0,0 +1,108 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_async_transmitter_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_async_transmitter_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/ant/ant_search_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_async_tx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/ses/ant_async_transmitter_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/ses/ant_async_transmitter_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..a691f39
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/ses/ant_async_transmitter_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_async_transmitter_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/main.c
new file mode 100644
index 0000000..88ea923
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/main.c
@@ -0,0 +1,132 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/*
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdint.h>
+#include "nrf.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "bsp.h"
+#include "boards.h"
+#include "hardfault.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+#include "ant_async_tx.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+/**@brief Function for the Timer and BSP initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                        ant_async_tx_bsp_evt_handler);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for ANT stack initialization.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    ant_async_tx_setup();
+
+    NRF_LOG_INFO("ANT Asynchronous Transmitter example started.");
+
+    // Enter main loop
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/arm4/ant_async_transmitter_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/arm4/ant_async_transmitter_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/arm4/ant_async_transmitter_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/arm4/ant_async_transmitter_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/arm4/ant_async_transmitter_pca10040_s212.uvproj
new file mode 100644
index 0000000..cadd064
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/arm4/ant_async_transmitter_pca10040_s212.uvproj
@@ -0,0 +1,554 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_async_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_async_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/arm5_no_packs/ant_async_transmitter_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/arm5_no_packs/ant_async_transmitter_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/arm5_no_packs/ant_async_transmitter_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/arm5_no_packs/ant_async_transmitter_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/arm5_no_packs/ant_async_transmitter_pca10040_s212.uvprojx
new file mode 100644
index 0000000..706c6a0
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/arm5_no_packs/ant_async_transmitter_pca10040_s212.uvprojx
@@ -0,0 +1,578 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_async_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_async_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..421d182
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,191 @@
+PROJECT_NAME     := ant_async_transmitter_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_async_transmitter_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_async_tx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/armgcc/ant_async_transmitter_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/armgcc/ant_async_transmitter_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/armgcc/ant_async_transmitter_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..e19299d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3887 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/iar/ant_async_transmitter_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/iar/ant_async_transmitter_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/iar/ant_async_transmitter_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/iar/ant_async_transmitter_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/iar/ant_async_transmitter_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/iar/ant_async_transmitter_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/iar/ant_async_transmitter_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/iar/ant_async_transmitter_pca10040_s212.ewp
new file mode 100644
index 0000000..ac4d2db
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/iar/ant_async_transmitter_pca10040_s212.ewp
@@ -0,0 +1,1084 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_async_transmitter_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_async_transmitter_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_async_transmitter_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_async_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/ses/ant_async_transmitter_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/ses/ant_async_transmitter_pca10040_s212.emProject
new file mode 100644
index 0000000..0abf26e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/ses/ant_async_transmitter_pca10040_s212.emProject
@@ -0,0 +1,107 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_async_transmitter_pca10040_s212" target="8" version="2">
+  <project Name="ant_async_transmitter_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/ant/ant_search_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_async_tx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/ses/ant_async_transmitter_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/ses/ant_async_transmitter_pca10040_s212.emSession
new file mode 100644
index 0000000..3fc9098
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/ses/ant_async_transmitter_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_async_transmitter_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_async_transmitter/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/ant_background_scanning.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/ant_background_scanning.eww
new file mode 100644
index 0000000..799e11d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/ant_background_scanning.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_background_scanning_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_background_scanning_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/background_scanning_test.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/background_scanning_test.xml
new file mode 100644
index 0000000..ce28079
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/background_scanning_test.xml
@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:09-Sep-15 9:18:41 AM-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup />
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">1</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">5</transmissionType>
+      <msgPeriod type="System.UInt16">2048</msgPeriod>
+      <radioFreq type="System.Byte">77</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">0</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">5</transmissionType>
+      <msgPeriod type="System.UInt16">2048</msgPeriod>
+      <radioFreq type="System.Byte">77</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">35</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">36</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">37</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">38</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">39</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">40</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/arm4/ant_background_scanning_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/arm4/ant_background_scanning_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/arm4/ant_background_scanning_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/arm4/ant_background_scanning_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/arm4/ant_background_scanning_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..a0ec3dc
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/arm4/ant_background_scanning_d52_starterkit_s212.uvproj
@@ -0,0 +1,554 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/arm5_no_packs/ant_background_scanning_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/arm5_no_packs/ant_background_scanning_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/arm5_no_packs/ant_background_scanning_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/arm5_no_packs/ant_background_scanning_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/arm5_no_packs/ant_background_scanning_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..9ad31d6
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/arm5_no_packs/ant_background_scanning_d52_starterkit_s212.uvprojx
@@ -0,0 +1,578 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..c5d731f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,187 @@
+PROJECT_NAME     := ant_background_scanning_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_background_scanning_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/armgcc/ant_background_scanning_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/armgcc/ant_background_scanning_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/armgcc/ant_background_scanning_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..39fc57b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3948 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_BS_CHANNEL_NUMBER - BS channel number. 
+#ifndef ANT_BS_CHANNEL_NUMBER
+#define ANT_BS_CHANNEL_NUMBER 0
+#endif
+
+// <o> ANT_MS_CHANNEL_NUMBER - MS channel number. 
+#ifndef ANT_MS_CHANNEL_NUMBER
+#define ANT_MS_CHANNEL_NUMBER 1
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 1
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 5
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 2048
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 77
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 2
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/iar/ant_background_scanning_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/iar/ant_background_scanning_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/iar/ant_background_scanning_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/iar/ant_background_scanning_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/iar/ant_background_scanning_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..52e68c3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/iar/ant_background_scanning_d52_starterkit_s212.ewp
@@ -0,0 +1,1080 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_background_scanning_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_background_scanning_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_background_scanning_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/iar/ant_background_scanning_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/iar/ant_background_scanning_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/iar/ant_background_scanning_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/ses/ant_background_scanning_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/ses/ant_background_scanning_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..7d00c65
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/ses/ant_background_scanning_d52_starterkit_s212.emProject
@@ -0,0 +1,107 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_background_scanning_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_background_scanning_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/ant/ant_search_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/ses/ant_background_scanning_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/ses/ant_background_scanning_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..53d5d71
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/ses/ant_background_scanning_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_background_scanning_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/main.c
new file mode 100644
index 0000000..00eeb78
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/main.c
@@ -0,0 +1,342 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2013
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @defgroup nrf_ant_background_scanning_demo ANT Background Scanning Example
+ * @{
+ * @ingroup nrf_ant_background_scanning_demo
+ *
+ * @brief Example of ANT Background Scanning implementation.
+ *
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "nrf.h"
+#include "bsp.h"
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "nrf_soc.h"
+#include "nrf_sdm.h"
+#include "app_error.h"
+#include "app_util.h"
+#include "hardfault.h"
+#include "nordic_common.h"
+#include "nrf_pwr_mgmt.h"
+#include "ant_channel_config.h"
+#include "ant_search_config.h"
+#include "app_timer.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "sdk_config.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+#define ANT_NETWORK_NUMBER          ((uint8_t) 0)                       /**< Default public network number. */
+#define ANT_BEACON_PAGE             ((uint8_t) 1)
+
+#define APP_ANT_OBSERVER_PRIO       1                                  /**< Application's ANT observer priority. You shouldn't need to modify this value. */
+
+void ant_message_send(void);
+void background_scanner_process(ant_evt_t * p_ant_evt, void * p_context);
+void master_beacon_process(ant_evt_t * p_ant_evt, void * p_context);
+
+static uint8_t m_last_rssi       = 0;
+static uint16_t m_last_device_id = 0;
+static uint8_t m_recieved        = 0;
+
+/**@brief Function for setting payload for ANT message and sending it via
+ *        ANT master beacon channel.
+ *
+ * @details This function is called from the ANT stack event interrupt handler after an ANT stack
+ *          event has been received.
+ *
+ * @details   ANT_BEACON_PAGE message is queued. The format is:
+ *            byte[0]   = page (1 = ANT_BEACON_PAGE)
+ *            byte[1]   = last RSSI value received
+ *            byte[2-3] = channel ID of device corresponding to last RSSI value (little endian)
+ *            byte[6]   = counter that increases with every message period
+ *            byte[7]   = number of messages received on background scanning channel
+ */
+void ant_message_send()
+{
+    uint32_t       err_code;
+    uint8_t        tx_buffer[ANT_STANDARD_DATA_PAYLOAD_SIZE];
+    static uint8_t counter = 0;
+
+    tx_buffer[0] = ANT_BEACON_PAGE;
+    tx_buffer[1] = m_last_rssi;
+    tx_buffer[2] = (uint8_t) m_last_device_id;        // LSB
+    tx_buffer[3] = (uint8_t) (m_last_device_id >> 8); // MSB
+    tx_buffer[6] = counter++;
+    tx_buffer[7] = m_recieved;
+
+    err_code = sd_ant_broadcast_message_tx(ANT_MS_CHANNEL_NUMBER,
+                                           ANT_STANDARD_DATA_PAYLOAD_SIZE,
+                                           tx_buffer);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Initialize application.
+ */
+static void application_initialize()
+{
+    /* Set library config to report RSSI and Device ID */
+    uint32_t err_code = sd_ant_lib_config_set(ANT_LIB_CONFIG_MESG_OUT_INC_RSSI
+                                            | ANT_LIB_CONFIG_MESG_OUT_INC_DEVICE_ID);
+    APP_ERROR_CHECK(err_code);
+
+    const uint16_t dev_num = (uint16_t)NRF_FICR->DEVICEID[0];
+
+    const ant_channel_config_t ms_channel_config =
+    {
+        .channel_number    = ANT_MS_CHANNEL_NUMBER,
+        .channel_type      = CHANNEL_TYPE_MASTER,
+        .ext_assign        = 0x00,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .device_number     = dev_num,
+        .channel_period    = CHAN_PERIOD,
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    const ant_channel_config_t bs_channel_config =
+    {
+        .channel_number    = ANT_BS_CHANNEL_NUMBER,
+        .channel_type      = CHANNEL_TYPE_SLAVE,
+        .ext_assign        = EXT_PARAM_ALWAYS_SEARCH,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .device_number     = 0x00,              // Wild card
+        .channel_period    = 0x00,              // This is not taken into account.
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    const ant_search_config_t bs_search_config =
+    {
+        .channel_number        = ANT_BS_CHANNEL_NUMBER,
+        .low_priority_timeout  = ANT_LOW_PRIORITY_TIMEOUT_DISABLE,
+        .high_priority_timeout = ANT_HIGH_PRIORITY_SEARCH_DISABLE,
+        .search_sharing_cycles = ANT_SEARCH_SHARING_CYCLES_DISABLE,
+        .search_priority       = ANT_SEARCH_PRIORITY_DEFAULT,
+        .waveform              = ANT_WAVEFORM_DEFAULT,
+    };
+
+    err_code = ant_channel_init(&ms_channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_channel_init(&bs_channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_search_init(&bs_search_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Fill tx buffer for the first frame
+    ant_message_send();
+
+    err_code = sd_ant_channel_open(ANT_MS_CHANNEL_NUMBER);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = sd_ant_channel_open(ANT_BS_CHANNEL_NUMBER);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**@brief Function for the Tracer initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS, NULL);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**@brief Function for ANT stack initialization.
+ *
+ * @details Initializes the SoftDevice and the ANT event interrupt.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+
+/**@brief Process ANT message on ANT background scanning channel.
+ *
+ * @param[in] p_ant_evt   ANT message content.
+ * @param[in] p_context   Context.
+ */
+void background_scanner_process(ant_evt_t * p_ant_evt, void * p_context)
+{
+    uint32_t err_code;
+    UNUSED_PARAMETER(p_context);
+    if (p_ant_evt->channel != ANT_BS_CHANNEL_NUMBER)
+    {
+        return;
+    }
+
+    switch (p_ant_evt->event)
+    {
+        case EVENT_RX:
+        {
+            err_code = bsp_indication_set(BSP_INDICATE_RCV_OK);
+            APP_ERROR_CHECK(err_code);
+
+            if (p_ant_evt->message.ANT_MESSAGE_stExtMesgBF.bANTDeviceID)
+            {
+                m_last_device_id = uint16_decode(p_ant_evt->message.ANT_MESSAGE_aucExtData);
+            }
+
+            if (p_ant_evt->message.ANT_MESSAGE_stExtMesgBF.bANTRssi)
+            {
+                m_last_rssi = p_ant_evt->message.ANT_MESSAGE_aucExtData[5];
+            }
+
+            NRF_LOG_INFO("Message number %d", m_recieved);
+            NRF_LOG_INFO("Device ID:     %d", m_last_device_id);
+            NRF_LOG_INFO("RSSI:          %d", m_last_rssi);
+
+            m_recieved++;
+            break;
+        }
+        default:
+        {
+            break;
+        }
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_bs_observer, APP_ANT_OBSERVER_PRIO, background_scanner_process, NULL);
+
+/**@brief Process ANT message on ANT master beacon channel.
+ *
+ *
+ * @details   This function handles all events on the master beacon channel.
+ *            On EVENT_TX an ANT_BEACON_PAGE message is queued.
+ *
+ * @param[in] p_ant_evt   ANT message content.
+ * @param[in] p_contex      Context.
+ */
+void master_beacon_process(ant_evt_t * p_ant_evt, void * p_contex)
+{
+    if (p_ant_evt->channel != ANT_MS_CHANNEL_NUMBER)
+    {
+        return;
+    }
+
+    switch (p_ant_evt->event)
+    {
+        case EVENT_TX:
+            ant_message_send();
+            break;
+
+        default:
+            break;
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_ms_observer, APP_ANT_OBSERVER_PRIO,
+                              master_beacon_process, NULL);
+
+/* Main function */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    application_initialize();
+
+    NRF_LOG_INFO("ANT Background Scanning example started.");
+
+    // Enter main loop
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
+
+
+/**
+ *@}
+ **/
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/arm4/ant_background_scanning_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/arm4/ant_background_scanning_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/arm4/ant_background_scanning_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/arm4/ant_background_scanning_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/arm4/ant_background_scanning_pca10040_s212.uvproj
new file mode 100644
index 0000000..0644662
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/arm4/ant_background_scanning_pca10040_s212.uvproj
@@ -0,0 +1,551 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/arm5_no_packs/ant_background_scanning_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/arm5_no_packs/ant_background_scanning_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/arm5_no_packs/ant_background_scanning_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/arm5_no_packs/ant_background_scanning_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/arm5_no_packs/ant_background_scanning_pca10040_s212.uvprojx
new file mode 100644
index 0000000..10b43d1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/arm5_no_packs/ant_background_scanning_pca10040_s212.uvprojx
@@ -0,0 +1,575 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..d44ead1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,190 @@
+PROJECT_NAME     := ant_background_scanning_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_background_scanning_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/armgcc/ant_background_scanning_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/armgcc/ant_background_scanning_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/armgcc/ant_background_scanning_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..98e3a17
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3892 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_BS_CHANNEL_NUMBER - BS channel number. 
+#ifndef ANT_BS_CHANNEL_NUMBER
+#define ANT_BS_CHANNEL_NUMBER 0
+#endif
+
+// <o> ANT_MS_CHANNEL_NUMBER - MS channel number. 
+#ifndef ANT_MS_CHANNEL_NUMBER
+#define ANT_MS_CHANNEL_NUMBER 1
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 1
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 5
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 2048
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 77
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 2
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/iar/ant_background_scanning_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/iar/ant_background_scanning_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/iar/ant_background_scanning_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/iar/ant_background_scanning_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/iar/ant_background_scanning_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/iar/ant_background_scanning_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/iar/ant_background_scanning_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/iar/ant_background_scanning_pca10040_s212.ewp
new file mode 100644
index 0000000..03fcce4
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/iar/ant_background_scanning_pca10040_s212.ewp
@@ -0,0 +1,1083 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_background_scanning_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_background_scanning_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_background_scanning_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/ses/ant_background_scanning_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/ses/ant_background_scanning_pca10040_s212.emProject
new file mode 100644
index 0000000..262624f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/ses/ant_background_scanning_pca10040_s212.emProject
@@ -0,0 +1,106 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_background_scanning_pca10040_s212" target="8" version="2">
+  <project Name="ant_background_scanning_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/ant/ant_search_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/ses/ant_background_scanning_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/ses/ant_background_scanning_pca10040_s212.emSession
new file mode 100644
index 0000000..82fb14b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/ses/ant_background_scanning_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_background_scanning_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_background_scanning/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/ant_broadcast_rx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/ant_broadcast_rx.eww
new file mode 100644
index 0000000..45fa2de
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/ant_broadcast_rx.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_broadcast_rx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_broadcast_rx_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/ant_broadcast_rx_test.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/ant_broadcast_rx_test.xml
new file mode 100644
index 0000000..6a93e98
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/ant_broadcast_rx_test.xml
@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:3/15/2016 7:47:04 AM-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup />
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">2</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">34</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">35</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">36</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">37</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">38</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">39</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">40</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/arm4/ant_broadcast_rx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/arm4/ant_broadcast_rx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/arm4/ant_broadcast_rx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/arm4/ant_broadcast_rx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/arm4/ant_broadcast_rx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..18a1c5c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/arm4/ant_broadcast_rx_d52_starterkit_s212.uvproj
@@ -0,0 +1,551 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/arm5_no_packs/ant_broadcast_rx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/arm5_no_packs/ant_broadcast_rx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/arm5_no_packs/ant_broadcast_rx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/arm5_no_packs/ant_broadcast_rx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/arm5_no_packs/ant_broadcast_rx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..e1a2317
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/arm5_no_packs/ant_broadcast_rx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,575 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..96ca311
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,185 @@
+PROJECT_NAME     := ant_broadcast_rx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_broadcast_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/armgcc/ant_broadcast_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/armgcc/ant_broadcast_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/armgcc/ant_broadcast_rx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..ccd0bfc
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3927 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> BROADCAST_CHANNEL_NUMBER - Broadcast channel number. 
+#ifndef BROADCAST_CHANNEL_NUMBER
+#define BROADCAST_CHANNEL_NUMBER 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 0
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 0
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 1
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 24
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/iar/ant_broadcast_rx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/iar/ant_broadcast_rx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/iar/ant_broadcast_rx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/iar/ant_broadcast_rx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/iar/ant_broadcast_rx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..89a5073
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/iar/ant_broadcast_rx_d52_starterkit_s212.ewp
@@ -0,0 +1,1077 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_broadcast_rx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_broadcast_rx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_broadcast_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/iar/ant_broadcast_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/iar/ant_broadcast_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/iar/ant_broadcast_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/ses/ant_broadcast_rx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/ses/ant_broadcast_rx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..ad9633f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/ses/ant_broadcast_rx_d52_starterkit_s212.emProject
@@ -0,0 +1,106 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_broadcast_rx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_broadcast_rx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/ses/ant_broadcast_rx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/ses/ant_broadcast_rx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..b99e089
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/ses/ant_broadcast_rx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_broadcast_rx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/main.c
new file mode 100644
index 0000000..2b3909c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/main.c
@@ -0,0 +1,203 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2014
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @defgroup ant_broadcast_rx_example ANT Broadcast RX Example
+ * @{
+ * @ingroup nrf_ant_broadcast
+ *
+ * @brief Example of basic ANT Broadcast RX.
+ *
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <string.h>
+#include "nrf.h"
+#include "bsp.h"
+#include "hardfault.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "ant_channel_config.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+#define APP_ANT_OBSERVER_PRIO   1    /**< Application's ANT observer priority. You shouldn't need to modify this value. */
+
+/**@brief Function for handling a ANT stack event.
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+void ant_evt_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    ret_code_t err_code;
+
+    if (p_ant_evt->channel == BROADCAST_CHANNEL_NUMBER)
+    {
+        switch (p_ant_evt->event)
+        {
+            case EVENT_RX:
+                if (p_ant_evt->message.ANT_MESSAGE_ucMesgID == MESG_BROADCAST_DATA_ID
+                 || p_ant_evt->message.ANT_MESSAGE_ucMesgID == MESG_ACKNOWLEDGED_DATA_ID
+                 || p_ant_evt->message.ANT_MESSAGE_ucMesgID == MESG_BURST_DATA_ID)
+                {
+                    err_code = bsp_indication_set(BSP_INDICATE_RCV_OK);
+                    APP_ERROR_CHECK(err_code);
+                }
+                break;
+
+            default:
+                break;
+        }
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, APP_ANT_OBSERVER_PRIO, ant_evt_handler, NULL);
+
+/**@brief Function for the Timer and BSP initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS,
+                        NULL);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for ANT stack initialization.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for setting up the ANT module to be ready for RX broadcast.
+ */
+static void ant_channel_rx_broadcast_setup(void)
+{
+    ant_channel_config_t broadcast_channel_config =
+    {
+        .channel_number    = BROADCAST_CHANNEL_NUMBER,
+        .channel_type      = CHANNEL_TYPE_SLAVE,
+        .ext_assign        = 0x00,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .device_number     = CHAN_ID_DEV_NUM,
+        .channel_period    = CHAN_PERIOD,
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    ret_code_t err_code = ant_channel_init(&broadcast_channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Open channel.
+    err_code = sd_ant_channel_open(BROADCAST_CHANNEL_NUMBER);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    ant_channel_rx_broadcast_setup();
+
+    NRF_LOG_INFO("ANT Broadcast RX example started.");
+
+    // Main loop.
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
+
+
+/**
+ *@}
+ **/
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/arm4/ant_broadcast_rx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/arm4/ant_broadcast_rx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/arm4/ant_broadcast_rx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/arm4/ant_broadcast_rx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/arm4/ant_broadcast_rx_pca10040_s212.uvproj
new file mode 100644
index 0000000..0ac5796
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/arm4/ant_broadcast_rx_pca10040_s212.uvproj
@@ -0,0 +1,548 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/arm5_no_packs/ant_broadcast_rx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/arm5_no_packs/ant_broadcast_rx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/arm5_no_packs/ant_broadcast_rx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/arm5_no_packs/ant_broadcast_rx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/arm5_no_packs/ant_broadcast_rx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..fef79bd
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/arm5_no_packs/ant_broadcast_rx_pca10040_s212.uvprojx
@@ -0,0 +1,572 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..0ac3d17
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,188 @@
+PROJECT_NAME     := ant_broadcast_rx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_broadcast_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/armgcc/ant_broadcast_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/armgcc/ant_broadcast_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/armgcc/ant_broadcast_rx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..fd4cc4b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3871 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> BROADCAST_CHANNEL_NUMBER - Broadcast channel number. 
+#ifndef BROADCAST_CHANNEL_NUMBER
+#define BROADCAST_CHANNEL_NUMBER 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 0
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 0
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 1
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 24
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/iar/ant_broadcast_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/iar/ant_broadcast_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/iar/ant_broadcast_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/iar/ant_broadcast_rx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/iar/ant_broadcast_rx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/iar/ant_broadcast_rx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/iar/ant_broadcast_rx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/iar/ant_broadcast_rx_pca10040_s212.ewp
new file mode 100644
index 0000000..5afda2d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/iar/ant_broadcast_rx_pca10040_s212.ewp
@@ -0,0 +1,1080 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_broadcast_rx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_broadcast_rx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_broadcast_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/ses/ant_broadcast_rx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/ses/ant_broadcast_rx_pca10040_s212.emProject
new file mode 100644
index 0000000..467c7d3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/ses/ant_broadcast_rx_pca10040_s212.emProject
@@ -0,0 +1,105 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_broadcast_rx_pca10040_s212" target="8" version="2">
+  <project Name="ant_broadcast_rx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/ses/ant_broadcast_rx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/ses/ant_broadcast_rx_pca10040_s212.emSession
new file mode 100644
index 0000000..dfc8ce2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/ses/ant_broadcast_rx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_broadcast_rx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/rx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/ant_broadcast_tx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/ant_broadcast_tx.eww
new file mode 100644
index 0000000..c12a5f8
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/ant_broadcast_tx.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_broadcast_tx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_broadcast_tx_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/ant_broadcast_tx_test.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/ant_broadcast_tx_test.xml
new file mode 100644
index 0000000..f50e972
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/ant_broadcast_tx_test.xml
@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:3/15/2016 7:57:22 AM-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup />
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">0</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">0</deviceType>
+      <transmissionType type="System.Byte">0</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">34</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">35</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">36</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">37</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">38</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">39</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">40</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/arm4/ant_broadcast_tx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/arm4/ant_broadcast_tx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/arm4/ant_broadcast_tx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/arm4/ant_broadcast_tx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/arm4/ant_broadcast_tx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..18a1c5c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/arm4/ant_broadcast_tx_d52_starterkit_s212.uvproj
@@ -0,0 +1,551 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/arm5_no_packs/ant_broadcast_tx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/arm5_no_packs/ant_broadcast_tx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/arm5_no_packs/ant_broadcast_tx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/arm5_no_packs/ant_broadcast_tx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/arm5_no_packs/ant_broadcast_tx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..e1a2317
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/arm5_no_packs/ant_broadcast_tx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,575 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..b10a3da
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,185 @@
+PROJECT_NAME     := ant_broadcast_tx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_broadcast_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/armgcc/ant_broadcast_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/armgcc/ant_broadcast_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..92b6791
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/armgcc/ant_broadcast_tx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..f701d68
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3927 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> BROADCAST_CHANNEL_NUMBER - Broadcast channel number. 
+#ifndef BROADCAST_CHANNEL_NUMBER
+#define BROADCAST_CHANNEL_NUMBER 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 2
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 1
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 24
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/iar/ant_broadcast_tx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/iar/ant_broadcast_tx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/iar/ant_broadcast_tx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/iar/ant_broadcast_tx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/iar/ant_broadcast_tx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..4201c25
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/iar/ant_broadcast_tx_d52_starterkit_s212.ewp
@@ -0,0 +1,1077 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_broadcast_tx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_broadcast_tx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_broadcast_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/iar/ant_broadcast_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/iar/ant_broadcast_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/iar/ant_broadcast_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/ses/ant_broadcast_tx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/ses/ant_broadcast_tx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..5d742f1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/ses/ant_broadcast_tx_d52_starterkit_s212.emProject
@@ -0,0 +1,106 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_broadcast_tx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_broadcast_tx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/ses/ant_broadcast_tx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/ses/ant_broadcast_tx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..400f404
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/ses/ant_broadcast_tx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_broadcast_tx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..700de6c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/main.c
new file mode 100644
index 0000000..7e3873d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/main.c
@@ -0,0 +1,225 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2014
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @defgroup nrf_ant_broadcast_tx_example ANT Broadcast TX Example
+ * @{
+ * @ingroup nrf_ant_broadcast
+ *
+ * @brief Example of basic ANT Broadcast TX.
+ *
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <string.h>
+#include "nrf.h"
+#include "bsp.h"
+#include "hardfault.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "ant_channel_config.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+#define APP_ANT_OBSERVER_PRIO   1    /**< Application's ANT observer priority. You shouldn't need to modify this value. */
+
+/**@brief Function for setting payload for ANT message and sending it.
+ */
+void ant_message_send(void)
+{
+    uint8_t         message_payload[ANT_STANDARD_DATA_PAYLOAD_SIZE];
+    static uint8_t  counter = 1u;
+
+    memset(message_payload, 0, ANT_STANDARD_DATA_PAYLOAD_SIZE);
+    // Assign a new value to the broadcast data.
+    message_payload[ANT_STANDARD_DATA_PAYLOAD_SIZE - 1] = counter;
+
+    // Broadcast the data.
+    ret_code_t err_code = sd_ant_broadcast_message_tx(BROADCAST_CHANNEL_NUMBER,
+                                                      ANT_STANDARD_DATA_PAYLOAD_SIZE,
+                                                      message_payload);
+    APP_ERROR_CHECK(err_code);
+
+    counter++;
+}
+
+/**@brief Function for handling a ANT stack event.
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+static void ant_evt_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    ret_code_t err_code;
+
+    nrf_pwr_mgmt_feed();
+
+    if (p_ant_evt->channel == BROADCAST_CHANNEL_NUMBER)
+    {
+        switch (p_ant_evt->event)
+        {
+            case EVENT_TX:
+                ant_message_send();
+
+                err_code = bsp_indication_set(BSP_INDICATE_SENT_OK);
+                APP_ERROR_CHECK(err_code);
+                break;
+
+            default:
+                break;
+        }
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, APP_ANT_OBSERVER_PRIO, ant_evt_handler, NULL);
+
+/**@brief Function for the Timer and BSP initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS,
+                        NULL);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for ANT stack initialization.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for setting up the ANT module to be ready for TX broadcast.
+ */
+static void ant_channel_tx_broadcast_setup(void)
+{
+    ant_channel_config_t broadcast_channel_config =
+    {
+        .channel_number    = BROADCAST_CHANNEL_NUMBER,
+        .channel_type      = CHANNEL_TYPE_MASTER,
+        .ext_assign        = 0x00,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .device_number     = CHAN_ID_DEV_NUM,
+        .channel_period    = CHAN_PERIOD,
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    ret_code_t err_code = ant_channel_init(&broadcast_channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Fill tx buffer for the first frame.
+    ant_message_send();
+
+    // Open channel.
+    err_code = sd_ant_channel_open(BROADCAST_CHANNEL_NUMBER);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    ant_channel_tx_broadcast_setup();
+
+    NRF_LOG_INFO("ANT Broadcast TX example started.");
+
+    // Main loop.
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
+
+
+/**
+ *@}
+ **/
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/arm4/ant_broadcast_tx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/arm4/ant_broadcast_tx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/arm4/ant_broadcast_tx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/arm4/ant_broadcast_tx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/arm4/ant_broadcast_tx_pca10040_s212.uvproj
new file mode 100644
index 0000000..0ac5796
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/arm4/ant_broadcast_tx_pca10040_s212.uvproj
@@ -0,0 +1,548 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/arm5_no_packs/ant_broadcast_tx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/arm5_no_packs/ant_broadcast_tx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/arm5_no_packs/ant_broadcast_tx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/arm5_no_packs/ant_broadcast_tx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/arm5_no_packs/ant_broadcast_tx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..fef79bd
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/arm5_no_packs/ant_broadcast_tx_pca10040_s212.uvprojx
@@ -0,0 +1,572 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..7078ad4
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,188 @@
+PROJECT_NAME     := ant_broadcast_tx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_broadcast_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/armgcc/ant_broadcast_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/armgcc/ant_broadcast_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..7cc4ed3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/armgcc/ant_broadcast_tx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..8a6ff89
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3871 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> BROADCAST_CHANNEL_NUMBER - Broadcast channel number. 
+#ifndef BROADCAST_CHANNEL_NUMBER
+#define BROADCAST_CHANNEL_NUMBER 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 2
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 1
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 24
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/iar/ant_broadcast_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/iar/ant_broadcast_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/iar/ant_broadcast_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/iar/ant_broadcast_tx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/iar/ant_broadcast_tx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/iar/ant_broadcast_tx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/iar/ant_broadcast_tx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/iar/ant_broadcast_tx_pca10040_s212.ewp
new file mode 100644
index 0000000..214bfa5
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/iar/ant_broadcast_tx_pca10040_s212.ewp
@@ -0,0 +1,1080 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_broadcast_tx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_broadcast_tx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_broadcast_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/ses/ant_broadcast_tx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/ses/ant_broadcast_tx_pca10040_s212.emProject
new file mode 100644
index 0000000..20c80b1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/ses/ant_broadcast_tx_pca10040_s212.emProject
@@ -0,0 +1,105 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_broadcast_tx_pca10040_s212" target="8" version="2">
+  <project Name="ant_broadcast_tx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/ses/ant_broadcast_tx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/ses/ant_broadcast_tx_pca10040_s212.emSession
new file mode 100644
index 0000000..7064c85
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/ses/ant_broadcast_tx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_broadcast_tx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..4c4f909
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_broadcast/tx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/ant_continuous_scanning_controller.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/ant_continuous_scanning_controller.eww
new file mode 100644
index 0000000..cda4aa2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/ant_continuous_scanning_controller.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_continuous_scanning_controller_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_continuous_scanning_controller_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/ant_continuous_scanning_controller_test.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/ant_continuous_scanning_controller_test.xml
new file mode 100644
index 0000000..7aa2cc8
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/ant_continuous_scanning_controller_test.xml
@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:2016-03-02 16:08:43-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup />
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">1</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">21</transmissionType>
+      <msgPeriod type="System.UInt16">2048</msgPeriod>
+      <radioFreq type="System.Byte">25</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">34</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">35</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">36</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">37</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">38</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">39</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">40</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/commands.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/commands.h
new file mode 100644
index 0000000..ae35706
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/commands.h
@@ -0,0 +1,76 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#ifndef __COMMANDS_H__
+#define __COMMANDS_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define COMMAND_LIGHT_OFF               ((uint8_t) 0)       /**< Command: light off. */
+#define COMMAND_LIGHT_ON                ((uint8_t) 1)       /**< Command: light on. */
+
+#define COMMAND_STATE_OFF               ((uint8_t) 1)       /**< Command: off */
+#define COMMAND_STATE_ON                ((uint8_t) 2)       /**< Command: on. */
+#define COMMAND_STATE_ALL_OFF           ((uint8_t) 3)       /**< Command: all off. */
+#define COMMAND_STATE_ALL_ON            ((uint8_t) 4)       /**< Command: all on. */
+
+#define MOBILE_COMMAND_PAGE             ((uint8_t) 0x10)    /**< Mobile command. */
+#define DEVICE_STATUS_PAGE              ((uint8_t) 0x20)    /**< Device status. */
+
+#define ADDRESS_ALL_NODES               ((uint8_t) 0)       /**< Address all nodes. */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/arm4/ant_continuous_scanning_controller_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/arm4/ant_continuous_scanning_controller_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/arm4/ant_continuous_scanning_controller_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/arm4/ant_continuous_scanning_controller_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/arm4/ant_continuous_scanning_controller_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..a0ec3dc
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/arm4/ant_continuous_scanning_controller_d52_starterkit_s212.uvproj
@@ -0,0 +1,554 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/arm5_no_packs/ant_continuous_scanning_controller_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/arm5_no_packs/ant_continuous_scanning_controller_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/arm5_no_packs/ant_continuous_scanning_controller_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/arm5_no_packs/ant_continuous_scanning_controller_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/arm5_no_packs/ant_continuous_scanning_controller_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..9ad31d6
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/arm5_no_packs/ant_continuous_scanning_controller_d52_starterkit_s212.uvprojx
@@ -0,0 +1,578 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..d1d295b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,187 @@
+PROJECT_NAME     := ant_continuous_scanning_controller_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_continuous_scanning_controller_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/armgcc/ant_continuous_scanning_controller_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/armgcc/ant_continuous_scanning_controller_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/armgcc/ant_continuous_scanning_controller_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..83580fc
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3948 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> ANT_RESPONSE_CHANNEL_NUMBER - ANT response channel number. 
+#ifndef ANT_RESPONSE_CHANNEL_NUMBER
+#define ANT_RESPONSE_CHANNEL_NUMBER 1
+#endif
+
+// <o> ANT_SCAN_CHANNEL_NUMBER - ANT scan channel number. 
+#ifndef ANT_SCAN_CHANNEL_NUMBER
+#define ANT_SCAN_CHANNEL_NUMBER 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 1
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 21
+#endif
+
+// <o> HOME_ID - Unique ID for the entire network. 
+#ifndef HOME_ID
+#define HOME_ID 4660
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 25
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 2
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/iar/ant_continuous_scanning_controller_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/iar/ant_continuous_scanning_controller_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/iar/ant_continuous_scanning_controller_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/iar/ant_continuous_scanning_controller_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/iar/ant_continuous_scanning_controller_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..1463003
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/iar/ant_continuous_scanning_controller_d52_starterkit_s212.ewp
@@ -0,0 +1,1080 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_continuous_scanning_controller_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_continuous_scanning_controller_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_continuous_scanning_controller_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/iar/ant_continuous_scanning_controller_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/iar/ant_continuous_scanning_controller_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/iar/ant_continuous_scanning_controller_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/ses/ant_continuous_scanning_controller_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/ses/ant_continuous_scanning_controller_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..f80598d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/ses/ant_continuous_scanning_controller_d52_starterkit_s212.emProject
@@ -0,0 +1,107 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_continuous_scanning_controller_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_continuous_scanning_controller_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/ant/ant_search_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/ses/ant_continuous_scanning_controller_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/ses/ant_continuous_scanning_controller_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..9ad4979
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/ses/ant_continuous_scanning_controller_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_continuous_scanning_controller_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/main.c
new file mode 100644
index 0000000..a3e4924
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/main.c
@@ -0,0 +1,462 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/*
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include "nrf.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "bsp.h"
+#include "boards.h"
+#include "hardfault.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+#include "ant_channel_config.h"
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "commands.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+#define APP_TIMER_PRESCALER           0                                             /**< Value of the RTC1 PRESCALER register. */
+#define APP_TIMER_OP_QUEUE_SIZE       2u                                            /**< Size of timer operation queues. */
+
+#define SCAN_TIMER_TICKS            APP_TIMER_TICKS(500u)                           /**< Scan timer ticks. */
+
+#define MAX_RETRIES                 ((uint8_t) 5)                                   /**< Max retries. */
+#define MAX_DEVICES                 ((uint8_t) 16)                                  /**< Maximum number of nodes supported in this network. */
+
+#define CONVERT_DEVICE_NUM_TO_INDEX(device_number) (device_number % MAX_DEVICES)    /**< Hash function. */
+
+#define APP_ANT_OBSERVER_PRIO       1                                               /**< Application's ANT observer priority. You shouldn't need to modify this value. */
+
+typedef struct
+{
+    uint8_t rssi;               /**< RSSI. */
+    uint16_t device_number;     /**< Device number. */
+}node_t;
+
+
+static uint8_t m_tx_buffer[ANT_STANDARD_DATA_PAYLOAD_SIZE];  /**< Transmit buffer. */
+static node_t  m_node_list[MAX_DEVICES];                     /**< List of state of all devices in the network. */
+
+static uint8_t m_command;                                    /**< Command. */
+static uint8_t m_retries;                                    /**< Retries. */
+
+APP_TIMER_DEF(m_scan_timer_id);                              /**< Scan timer. */
+
+
+/**@brief Send command to node with highest RSSI.
+ * If a global command was selected, send to all.
+ */
+static void command_send(void)
+{
+    uint16_t device_number = 0;
+    uint8_t  max_rssi      = 0;
+    uint32_t err_code;
+
+    // Loop through nodes and pick highest rssi node
+    for (int node = 0; node < MAX_DEVICES; node++)
+    {
+        if (m_node_list[node].device_number != 0)
+        {
+            if (m_node_list[node].rssi > max_rssi)
+            {
+                max_rssi      = m_node_list[node].rssi;
+                device_number = m_node_list[node].device_number;
+            }
+        }
+    }
+
+    // Do not send the command if no device was found
+    // Close scanning channel and return
+    if ( device_number == 0 )
+    {
+        bsp_board_led_on(BSP_BOARD_LED_2);
+        bsp_board_led_off(BSP_BOARD_LED_0);
+        err_code = sd_ant_channel_close(ANT_SCAN_CHANNEL_NUMBER);
+        APP_ERROR_CHECK(err_code);
+        return;
+    }
+    else
+    {
+        bsp_board_led_off(BSP_BOARD_LED_2);
+    }
+
+    err_code = sd_ant_channel_id_set(ANT_RESPONSE_CHANNEL_NUMBER,
+                                     device_number,
+                                     CHAN_ID_DEV_TYPE,
+                                     CHAN_ID_TRANS_TYPE);
+    APP_ERROR_CHECK(err_code);
+
+    switch ( m_command )
+    {
+        case COMMAND_STATE_ON:
+            m_command = COMMAND_LIGHT_ON;
+            break;
+
+        case COMMAND_STATE_OFF:
+            m_command = COMMAND_LIGHT_OFF;
+            break;
+
+        case COMMAND_STATE_ALL_ON:
+            device_number = ADDRESS_ALL_NODES;
+            m_command     = COMMAND_LIGHT_ON;
+            break;
+
+        case COMMAND_STATE_ALL_OFF:
+            device_number = ADDRESS_ALL_NODES;
+            m_command     = COMMAND_LIGHT_OFF;
+            break;
+
+        default:
+            break; // No implementation needed
+    }
+
+    m_tx_buffer[0] = MOBILE_COMMAND_PAGE;
+    m_tx_buffer[1] = 0xFF;
+    m_tx_buffer[2] = device_number;
+    m_tx_buffer[3] = 0xFF;
+    m_tx_buffer[4] = 0xFF;
+    m_tx_buffer[5] = 0xFF;
+    m_tx_buffer[6] = 0xFF;
+    m_tx_buffer[7] = m_command;
+
+    err_code = sd_ant_acknowledge_message_tx(ANT_RESPONSE_CHANNEL_NUMBER,
+                                             ANT_STANDARD_DATA_PAYLOAD_SIZE,
+                                             m_tx_buffer);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**@brief Handler for scan timer event
+ * @param p_context     Pointer to context
+ */
+static void scan_timeout_event(void * p_context)
+{
+    command_send();
+    m_retries = MAX_RETRIES;
+}
+
+
+/**@brief Start sequence for sending command over scanning channel
+ *
+ * @param[in] command   Command selected with button
+ */
+static void command_sequence_start(uint8_t command)
+{
+    uint32_t err_code;
+
+    bsp_board_led_on(BSP_BOARD_LED_0);
+
+    for (int node = 0; node < MAX_DEVICES; node++)
+    {
+        m_node_list[node].device_number = 0;
+        m_node_list[node].rssi          = 0;
+    }
+    m_command = command;
+
+    err_code = sd_ant_rx_scan_mode_start(ANT_SCAN_CHANNEL_NUMBER);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = app_timer_start(m_scan_timer_id, SCAN_TIMER_TICKS, NULL);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**@brief Function for handling button events.
+ *
+ * @param[in] evt     BSP event
+ */
+static void bsp_evt_handler(bsp_event_t evt)
+{
+    switch (evt)
+    {
+        case BSP_EVENT_KEY_0:
+            bsp_board_led_off(BSP_BOARD_LED_2);
+            command_sequence_start(COMMAND_STATE_ON);
+            break;
+
+        case BSP_EVENT_KEY_1:
+            bsp_board_led_off(BSP_BOARD_LED_2);
+            command_sequence_start(COMMAND_STATE_OFF);
+            break;
+
+        case BSP_EVENT_KEY_2:
+            bsp_board_led_off(BSP_BOARD_LED_2);
+            command_sequence_start(COMMAND_STATE_ALL_ON);
+            break;
+
+        case BSP_EVENT_KEY_3:
+            bsp_board_led_off(BSP_BOARD_LED_2);
+            command_sequence_start(COMMAND_STATE_ALL_OFF);
+            break;
+
+        default:
+            break; //No implementation needed
+    }
+}
+
+
+/**@brief Function for the Timer and BSP initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                        bsp_evt_handler);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = app_timer_create(&m_scan_timer_id,
+                                APP_TIMER_MODE_SINGLE_SHOT,
+                                scan_timeout_event);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**@brief initialize application
+ */
+static void continuous_scan_init()
+{
+    uint32_t err_code;
+
+    // Set library config to report RSSI and Device ID
+    err_code = sd_ant_lib_config_set(
+        ANT_LIB_CONFIG_MESG_OUT_INC_RSSI | ANT_LIB_CONFIG_MESG_OUT_INC_DEVICE_ID);
+    APP_ERROR_CHECK(err_code);
+
+    // Configure channel 0 for scanning mode, but do not open it.
+    // The scanning channel will be opened in scan mode for a short amount of time on a button press.
+    ant_channel_config_t channel_config =
+    {
+        .channel_number    = ANT_SCAN_CHANNEL_NUMBER,
+        .channel_type      = CHANNEL_TYPE_SLAVE,
+        .ext_assign        = 0x00,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .device_number     = 0x00,          // Wildcard
+        .channel_period    = 0x00,          // Not used, since this is going to be scanning
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    err_code = ant_channel_init(&channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Assign a second channel for sending messages on the reverse direction
+    // There is no need to configure any other parameters, this channel is never opened;
+    // its resources are used by ANT to send messages in the reverse direction while in
+    // continuous scanning mode.
+    err_code = sd_ant_channel_assign(ANT_RESPONSE_CHANNEL_NUMBER,
+                                     CHANNEL_TYPE_SLAVE,
+                                     ANT_NETWORK_NUM,
+                                     0x00);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/** @brief Add a newly discovered node to the m_node_list
+ *
+ * @param[in] device_number   The device_number of the current to be added
+ * @param[in] rssi            The RSSI from the current node to be added
+ */
+void node_to_list_add(uint16_t device_number, uint8_t rssi)
+{
+    uint8_t index = MAX_DEVICES;                                // Specifed maximum total number in the array
+    uint8_t start = CONVERT_DEVICE_NUM_TO_INDEX(device_number); // Start index of the array
+
+    uint8_t node_device_number;
+
+    for (int i = 0; i < MAX_DEVICES; i++ )
+    {
+        node_device_number = m_node_list[(start + i) % MAX_DEVICES].device_number;
+
+        if ( node_device_number == device_number ) // If this node already exists, don't add it
+            return;
+
+        if (node_device_number == 0) // If we found a place to put it
+        {   // Find the best place to put this node (the place closest to the hash function result)
+            index = (start + i) % MAX_DEVICES;
+            break;
+        }
+    }
+
+    if ( index == MAX_DEVICES )
+        return;
+
+    m_node_list[index].device_number = device_number;
+    m_node_list[index].rssi          = rssi;
+}
+
+/**@brief Function for handling a ANT stack event.
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+void ant_evt_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    uint32_t err_code;
+    uint8_t  message_rssi;
+    uint16_t message_device_number;
+
+    ANT_MESSAGE * p_ant_message = (ANT_MESSAGE *) &p_ant_evt->message;
+
+    switch (p_ant_evt->event)
+    {
+        case EVENT_RX:
+            if (p_ant_message->ANT_MESSAGE_aucPayload[0] == DEVICE_STATUS_PAGE)
+            {
+                bsp_board_led_invert(BSP_BOARD_LED_1);
+                if (p_ant_message->ANT_MESSAGE_stExtMesgBF.bANTDeviceID &&
+                    p_ant_message->ANT_MESSAGE_stExtMesgBF.bANTRssi)
+                {
+                    message_device_number =
+                        (uint16_t)(p_ant_message->ANT_MESSAGE_aucExtData[0] |
+                                   ((uint16_t)p_ant_message->ANT_MESSAGE_aucExtData[1] << 8));
+                    message_rssi = p_ant_message->ANT_MESSAGE_aucExtData[5];
+                    node_to_list_add(message_device_number, message_rssi);
+                }
+            }
+            break;
+
+        case EVENT_TRANSFER_TX_COMPLETED:
+            bsp_board_led_off(BSP_BOARD_LED_0);
+            bsp_board_led_off(BSP_BOARD_LED_1);
+            err_code = sd_ant_channel_close(ANT_SCAN_CHANNEL_NUMBER);
+            APP_ERROR_CHECK(err_code);
+            break;
+
+        case EVENT_TRANSFER_TX_FAILED:
+            if (m_retries > 0)
+            {
+                command_send();
+                m_retries--;
+            }
+            else
+            {
+                bsp_board_led_off(BSP_BOARD_LED_0);
+                bsp_board_led_off(BSP_BOARD_LED_1);
+                err_code = sd_ant_channel_close(ANT_SCAN_CHANNEL_NUMBER);
+                APP_ERROR_CHECK(err_code);
+            }
+            break;
+
+        default:
+            break; // No implementation needed
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, APP_ANT_OBSERVER_PRIO, ant_evt_handler, NULL);
+
+/**@brief Function for ANT stack initialization.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+
+/* Main function */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    continuous_scan_init();
+
+    NRF_LOG_INFO("ANT Continuous Scanning Controller example started.");
+
+    // Enter main loop
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
+
+
+/**
+ *@}
+ **/
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/arm4/ant_continuous_scanning_controller_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/arm4/ant_continuous_scanning_controller_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/arm4/ant_continuous_scanning_controller_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/arm4/ant_continuous_scanning_controller_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/arm4/ant_continuous_scanning_controller_pca10040_s212.uvproj
new file mode 100644
index 0000000..0644662
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/arm4/ant_continuous_scanning_controller_pca10040_s212.uvproj
@@ -0,0 +1,551 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/arm5_no_packs/ant_continuous_scanning_controller_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/arm5_no_packs/ant_continuous_scanning_controller_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/arm5_no_packs/ant_continuous_scanning_controller_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/arm5_no_packs/ant_continuous_scanning_controller_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/arm5_no_packs/ant_continuous_scanning_controller_pca10040_s212.uvprojx
new file mode 100644
index 0000000..10b43d1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/arm5_no_packs/ant_continuous_scanning_controller_pca10040_s212.uvprojx
@@ -0,0 +1,575 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..4835431
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,190 @@
+PROJECT_NAME     := ant_continuous_scanning_controller_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_continuous_scanning_controller_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/armgcc/ant_continuous_scanning_controller_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/armgcc/ant_continuous_scanning_controller_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/armgcc/ant_continuous_scanning_controller_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..0acb681
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3892 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> ANT_RESPONSE_CHANNEL_NUMBER - ANT response channel number. 
+#ifndef ANT_RESPONSE_CHANNEL_NUMBER
+#define ANT_RESPONSE_CHANNEL_NUMBER 1
+#endif
+
+// <o> ANT_SCAN_CHANNEL_NUMBER - ANT scan channel number. 
+#ifndef ANT_SCAN_CHANNEL_NUMBER
+#define ANT_SCAN_CHANNEL_NUMBER 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 1
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 21
+#endif
+
+// <o> HOME_ID - Unique ID for the entire network. 
+#ifndef HOME_ID
+#define HOME_ID 4660
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 25
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 2
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/iar/ant_continuous_scanning_controller_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/iar/ant_continuous_scanning_controller_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/iar/ant_continuous_scanning_controller_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/iar/ant_continuous_scanning_controller_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/iar/ant_continuous_scanning_controller_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/iar/ant_continuous_scanning_controller_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/iar/ant_continuous_scanning_controller_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/iar/ant_continuous_scanning_controller_pca10040_s212.ewp
new file mode 100644
index 0000000..e3a5d43
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/iar/ant_continuous_scanning_controller_pca10040_s212.ewp
@@ -0,0 +1,1083 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_continuous_scanning_controller_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_continuous_scanning_controller_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_continuous_scanning_controller_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/ses/ant_continuous_scanning_controller_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/ses/ant_continuous_scanning_controller_pca10040_s212.emProject
new file mode 100644
index 0000000..cd6c435
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/ses/ant_continuous_scanning_controller_pca10040_s212.emProject
@@ -0,0 +1,106 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_continuous_scanning_controller_pca10040_s212" target="8" version="2">
+  <project Name="ant_continuous_scanning_controller_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/ant/ant_search_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/ses/ant_continuous_scanning_controller_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/ses/ant_continuous_scanning_controller_pca10040_s212.emSession
new file mode 100644
index 0000000..8c11af6
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/ses/ant_continuous_scanning_controller_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_continuous_scanning_controller_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_continuous_scanning_controller/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/ant_cw_mode.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/ant_cw_mode.eww
new file mode 100644
index 0000000..7df8992
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/ant_cw_mode.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_cw_mode_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_cw_mode_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/arm4/ant_cw_mode_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/arm4/ant_cw_mode_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/arm4/ant_cw_mode_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/arm4/ant_cw_mode_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/arm4/ant_cw_mode_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..217c1d2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/arm4/ant_cw_mode_d52_starterkit_s212.uvproj
@@ -0,0 +1,533 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/arm5_no_packs/ant_cw_mode_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/arm5_no_packs/ant_cw_mode_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/arm5_no_packs/ant_cw_mode_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/arm5_no_packs/ant_cw_mode_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/arm5_no_packs/ant_cw_mode_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..a75a7d7
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/arm5_no_packs/ant_cw_mode_d52_starterkit_s212.uvprojx
@@ -0,0 +1,557 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..5b7b59e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,174 @@
+PROJECT_NAME     := ant_cw_mode_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_cw_mode_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/armgcc/ant_cw_mode_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/armgcc/ant_cw_mode_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/armgcc/ant_cw_mode_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..ecfbe20
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3670 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> MODULATED_TRANSMISSION_TEST_MODE - Modulated transmission test mode type. 
+#ifndef MODULATED_TRANSMISSION_TEST_MODE
+#define MODULATED_TRANSMISSION_TEST_MODE 1
+#endif
+
+// <o> RADIO_FREQ_OFFSET - Radio frequency offset from 2400MHz for continuous wave mode. 
+#ifndef RADIO_FREQ_OFFSET
+#define RADIO_FREQ_OFFSET 10
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 2
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/iar/ant_cw_mode_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/iar/ant_cw_mode_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/iar/ant_cw_mode_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/iar/ant_cw_mode_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/iar/ant_cw_mode_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..412935f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/iar/ant_cw_mode_d52_starterkit_s212.ewp
@@ -0,0 +1,1061 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_cw_mode_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_cw_mode_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_cw_mode_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/iar/ant_cw_mode_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/iar/ant_cw_mode_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/iar/ant_cw_mode_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/ses/ant_cw_mode_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/ses/ant_cw_mode_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..265967f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/ses/ant_cw_mode_d52_starterkit_s212.emProject
@@ -0,0 +1,99 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_cw_mode_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_cw_mode_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/strerror;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/ses/ant_cw_mode_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/ses/ant_cw_mode_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..f539ae5
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/ses/ant_cw_mode_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_cw_mode_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/main.c
new file mode 100644
index 0000000..5945664
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/main.c
@@ -0,0 +1,148 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2016
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/*
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include "nrf_soc.h"
+#include "nrf_pwr_mgmt.h"
+#include "boards.h"
+#include "hardfault.h"
+#include "app_error.h"
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "sdk_config.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+/**@brief Initialize application.
+ */
+static void application_initialize()
+{
+    uint32_t err_code = sd_ant_cw_test_mode_init();
+    APP_ERROR_CHECK(err_code);
+
+    // sd_ant_cw_test_mode assumes that the hfclck is enabled.
+    // Request and wait for it to be ready.
+    err_code = sd_clock_hfclk_request();
+    APP_ERROR_CHECK(err_code);
+
+    uint32_t hfclk_is_running = 0;
+
+    while (!hfclk_is_running)
+    {
+        APP_ERROR_CHECK(sd_clock_hfclk_is_running(&hfclk_is_running) );
+    }
+
+    // CW Mode at +4dBm, 2410 MHz with Modulated Transmission
+    err_code = sd_ant_cw_test_mode(RADIO_FREQ_OFFSET,
+                                   RADIO_TX_POWER_LVL_CUSTOM,
+                                   RADIO_TXPOWER_TXPOWER_Pos4dBm,
+                                   MODULATED_TRANSMISSION_TEST_MODE);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**@brief Function for ANT stack initialization.
+ *
+ * @details Initializes the SoftDevice and the ANT event interrupt.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+
+/* Main function */
+int main(void)
+{
+    log_init();
+    softdevice_setup();
+    application_initialize();
+
+    NRF_LOG_INFO("ANT Continuous Waveform Mode example started.");
+
+    // Enter main loop
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/arm4/ant_cw_mode_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/arm4/ant_cw_mode_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/arm4/ant_cw_mode_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/arm4/ant_cw_mode_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/arm4/ant_cw_mode_pca10040_s212.uvproj
new file mode 100644
index 0000000..9814c9b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/arm4/ant_cw_mode_pca10040_s212.uvproj
@@ -0,0 +1,530 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/arm5_no_packs/ant_cw_mode_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/arm5_no_packs/ant_cw_mode_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/arm5_no_packs/ant_cw_mode_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/arm5_no_packs/ant_cw_mode_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/arm5_no_packs/ant_cw_mode_pca10040_s212.uvprojx
new file mode 100644
index 0000000..33b1f42
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/arm5_no_packs/ant_cw_mode_pca10040_s212.uvprojx
@@ -0,0 +1,554 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..7f044d4
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,177 @@
+PROJECT_NAME     := ant_cw_mode_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_cw_mode_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/armgcc/ant_cw_mode_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/armgcc/ant_cw_mode_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/armgcc/ant_cw_mode_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..b7d1ae8
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3614 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> MODULATED_TRANSMISSION_TEST_MODE - Modulated transmission test mode type. 
+#ifndef MODULATED_TRANSMISSION_TEST_MODE
+#define MODULATED_TRANSMISSION_TEST_MODE 1
+#endif
+
+// <o> RADIO_FREQ_OFFSET - Radio frequency offset from 2400MHz for continuous wave mode. 
+#ifndef RADIO_FREQ_OFFSET
+#define RADIO_FREQ_OFFSET 10
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 2
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/iar/ant_cw_mode_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/iar/ant_cw_mode_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/iar/ant_cw_mode_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/iar/ant_cw_mode_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/iar/ant_cw_mode_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/iar/ant_cw_mode_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/iar/ant_cw_mode_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/iar/ant_cw_mode_pca10040_s212.ewp
new file mode 100644
index 0000000..7acf315
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/iar/ant_cw_mode_pca10040_s212.ewp
@@ -0,0 +1,1064 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_cw_mode_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_cw_mode_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_cw_mode_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/ses/ant_cw_mode_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/ses/ant_cw_mode_pca10040_s212.emProject
new file mode 100644
index 0000000..28d107e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/ses/ant_cw_mode_pca10040_s212.emProject
@@ -0,0 +1,98 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_cw_mode_pca10040_s212" target="8" version="2">
+  <project Name="ant_cw_mode_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/strerror;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/ses/ant_cw_mode_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/ses/ant_cw_mode_pca10040_s212.emSession
new file mode 100644
index 0000000..16ed3d4
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/ses/ant_cw_mode_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_cw_mode_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_cw_mode/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/ant_debug.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/ant_debug.eww
new file mode 100644
index 0000000..10f7cf6
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/ant_debug.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_debug_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_debug_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/application.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/application.c
new file mode 100644
index 0000000..ce6934d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/application.c
@@ -0,0 +1,315 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**
+ * @defgroup application Test Application
+ * @brief Example of an application being debugged using debug messages.
+ */
+
+/**
+ * @file application.c
+ * @brief Example application source file
+ * @ingroup application
+ */
+
+
+#include "application.h"
+#include <stdint.h>
+#include "string.h"
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "app_error.h"
+#include "boards.h"
+#include "bsp.h"
+#include "sdk_config.h"
+#include "ant_channel_config.h"
+#include "debug.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+
+// Data Page Numbers
+#define DIGITALIO_DATA_PID              1u                          /**< Page number: digital data. */
+
+#define APP_ANT_OBSERVER_PRIO           1                           /**< Application's ANT observer priority. You shouldn't need to modify this value. */
+
+static uint8_t m_broadcast_data[ANT_STANDARD_DATA_PAYLOAD_SIZE];    /**< Primary data transmit buffer. */
+static uint8_t m_rx_input_pin_state = 0xFF;                         /**< State of received digital data, from the other node. */
+static uint8_t m_tx_input_pin_state = 0xFF;                         /**< State of digital inputs in this node, for transmission. */
+
+
+/**@brief Encode current state of buttons
+ *
+ * Configure bitfield encoding the state of the buttons
+ * Bit 0 = 0 if BSP_BUTTON_0 is pressed
+ * Bit 1 = 0 if BSP_BUTTON_1 is pressed
+ * Bit 2 = 0 if BSP_BUTTON_2 is pressed
+ * Bit 3 = 0 if BSP_BUTTON_3 is pressed
+ * Bit 4-7 = 1 (unused)
+ *
+ * The state of each button is also transmitted in the
+ * debug channel, with 0 = button pressed.
+ */
+static void button_state_encode(void)
+{
+    m_tx_input_pin_state = 0xFF;
+
+    #if DEBUG_CHANNEL_INCLUDED
+    for (uint8_t i = ANT_DEBUG_FIELD_BUTTON_A_STATUS; i <= ANT_DEBUG_FIELD_BUTTON_D_STATUS; i++)
+    {
+        ad_debug_field_set(i, 1);
+    }
+    #endif // DEBUG_CHANNEL_INCLUDED
+
+    if (bsp_button_is_pressed(0))
+    {
+        m_tx_input_pin_state &= 0xFE;
+#if DEBUG_CHANNEL_INCLUDED
+        ad_debug_field_set(ANT_DEBUG_FIELD_BUTTON_A_STATUS,0);
+#endif // DEBUG_CHANNEL_INCLUDED
+    }
+
+    if (bsp_button_is_pressed(1))
+    {
+        m_tx_input_pin_state &= 0xFD;
+#if DEBUG_CHANNEL_INCLUDED
+        ad_debug_field_set(ANT_DEBUG_FIELD_BUTTON_B_STATUS,0);
+#endif // DEBUG_CHANNEL_INCLUDED
+    }
+
+    if (bsp_button_is_pressed(2))
+    {
+        m_tx_input_pin_state &= 0xFB;
+#if DEBUG_CHANNEL_INCLUDED
+        ad_debug_field_set(ANT_DEBUG_FIELD_BUTTON_C_STATUS,0);
+#endif // DEBUG_CHANNEL_INCLUDED
+    }
+
+    if (bsp_button_is_pressed(3))
+    {
+        m_tx_input_pin_state &= 0xF7;
+#if DEBUG_CHANNEL_INCLUDED
+        ad_debug_field_set(ANT_DEBUG_FIELD_BUTTON_D_STATUS,0);
+#endif // DEBUG_CHANNEL_INCLUDED
+    }
+}
+
+
+/**@brief Formats page with current button state and sends data
+ * Byte 0 = Page number (Digital I/O Data)
+ * Byte 1-6 = Reserved
+ * Byte 7 = State of digital inputs
+ */
+static void transmit_handle()
+{
+    uint32_t err_code;
+
+    button_state_encode();
+
+    m_broadcast_data[0] = DIGITALIO_DATA_PID;
+    m_broadcast_data[1] = 0xFF;
+    m_broadcast_data[2] = 0xFF;
+    m_broadcast_data[3] = 0xFF;
+    m_broadcast_data[4] = 0xFF;
+    m_broadcast_data[5] = 0xFF;
+    m_broadcast_data[6] = 0xFF;
+    m_broadcast_data[7] = m_tx_input_pin_state;
+
+    err_code = sd_ant_broadcast_message_tx(ANT_CHANNEL_NUM,
+                                           ANT_STANDARD_DATA_PAYLOAD_SIZE,
+                                           m_broadcast_data);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**@brief Turns on LEDs according to the contents of the received data page.
+ */
+static void led_state_set()
+{
+    uint8_t led_state_field = ~m_rx_input_pin_state;
+
+    if (led_state_field & 1)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_0);
+    }
+    else
+    {
+        bsp_board_led_off(BSP_BOARD_LED_0);
+    }
+
+    if (led_state_field & 2)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_1);
+    }
+    else
+    {
+        bsp_board_led_off(BSP_BOARD_LED_1);
+    }
+
+    if (led_state_field & 4)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_2);
+    }
+    else
+    {
+        bsp_board_led_off(BSP_BOARD_LED_2);
+    }
+
+    if (led_state_field & 8)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_3);
+    }
+    else
+    {
+        bsp_board_led_off(BSP_BOARD_LED_3);
+    }
+
+    #if DEBUG_CHANNEL_INCLUDED
+    // Example use for Fast Debug Byte
+    // Check the value actually written to LED A is correct by outputting to Fast Debug Byte (1 for on, 0 for off)
+    ad_fast_debug_byte_set(bsp_board_led_state_get(BSP_BOARD_LED_0) ? 1 : 0);
+    #endif // DEBUG_CHANNEL_INCLUDED
+}
+
+
+void app_channel_setup(void)
+{
+    uint32_t err_code;
+
+    #if DEBUG_CHANNEL_INCLUDED
+    // Init debug fields
+    ad_debug_field_set(ANT_DEBUG_FIELD_TX_TOTAL_CH0, 0);
+    ad_debug_field_set(ANT_DEBUG_FIELD_RX_TOTAL_CH0, 0);
+    ad_debug_field_set(ANT_DEBUG_FIELD_COLLISIONS_CH0, 0);
+    #endif // DEBUG_CHANNEL_INCLUDED
+
+    ant_channel_config_t channel_config =
+    {
+        .channel_number    = ANT_CHANNEL_NUM,
+        .channel_type      = CHANNEL_TYPE_MASTER,
+        .ext_assign        = 0x00,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .device_number     = (uint16_t) NRF_FICR->DEVICEID[0],
+        .channel_period    = CHAN_PERIOD,
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    // Configure channel parameters
+    err_code = ant_channel_init(&channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Open channel.
+    err_code = sd_ant_channel_open(ANT_CHANNEL_NUM);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for handling a ANT stack event.
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+static void ant_evt_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    if (p_ant_evt->channel != ANT_CHANNEL_NUM)
+    {
+        return;
+    }
+
+    switch (p_ant_evt->event)
+    {
+        case EVENT_RX:
+            if (p_ant_evt->message.ANT_MESSAGE_aucPayload[0] == DIGITALIO_DATA_PID)
+            {
+                // Set LEDs according to Received Digital IO Data Page
+                m_rx_input_pin_state = p_ant_evt->message.ANT_MESSAGE_aucPayload[7];
+                led_state_set();
+            }
+            #if DEBUG_CHANNEL_INCLUDED
+            ad_debug_field_increment(ANT_DEBUG_FIELD_RX_TOTAL_CH0);
+            #endif // DEBUG_CHANNEL_INCLUDED
+            break;
+
+        case EVENT_TX:
+            // Transmit data on the reverse direction every channel period
+            transmit_handle();
+            #if DEBUG_CHANNEL_INCLUDED
+            ad_debug_field_increment(ANT_DEBUG_FIELD_TX_TOTAL_CH0);
+            #endif // DEBUG_CHANNEL_INCLUDED
+            break;
+
+        case EVENT_CHANNEL_COLLISION:
+            #if DEBUG_CHANNEL_INCLUDED
+            ad_debug_field_increment(ANT_DEBUG_FIELD_COLLISIONS_CH0);
+            #endif // DEBUG_CHANNEL_INCLUDED
+            break;
+
+        default:
+            break;
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, APP_ANT_OBSERVER_PRIO, ant_evt_handler, NULL);
+
+#if DEBUG_CHANNEL_INCLUDED
+void app_custom_debug_command_handler(uint8_t const * const p_command)
+{
+    // Example of a custom command sent over the debug channel which causes the device to turn all its LEDs on.
+    // Do not define any custom commands which begin with the debug message indicator: 0xF9 - they will be misinterpreted as a filter message.
+    if (p_command[0] == 0x42)
+    {
+        bsp_board_leds_on();
+    }
+    else
+    {
+        bsp_board_leds_off();
+    }
+}
+#endif // DEBUG_CHANNEL_INCLUDED
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/application.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/application.h
new file mode 100644
index 0000000..f2ea0e5
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/application.h
@@ -0,0 +1,80 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#ifndef APPLICATION_H__
+#define APPLICATION_H__
+
+/**
+ * @file application.h
+ * @brief Example application header file
+ * @ingroup application
+ */
+
+#include <stdint.h>
+#include "sdk_config.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@brief Function for configuring and opening master channel.
+ *
+ */
+void app_channel_setup(void);
+
+#if DEBUG_CHANNEL_INCLUDED
+void app_custom_debug_command_handler(uint8_t const * const p_command);
+#endif // DEBUG_CHANNEL_INCLUDED
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // APPLICATION_H__
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/config.txt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/config.txt
new file mode 100644
index 0000000..cdeb4dc
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/config.txt
@@ -0,0 +1,18 @@
+# Display the states of some buttons on the device. These are enumerations.
+0,Button A Status,e,PUSHED.NOTPUSHED
+1,Button B Status,e,PUSHED.NOTPUSHED
+2,Button C Status,e,PUSHED.NOTPUSHED
+3,Button D Status,e,PUSHED.NOTPUSHED
+
+# Display information about asserts
+4,Error Line Number,u,1
+5,First Two Letters in File Name,c
+
+# Display the contents of a register in hex
+6,GPIO Register Low,h,1
+7,GPIO Register High,h,1
+
+#Channel statistics about the application channel
+132,RxTotalCh0,u,1
+140,TxTotalCh0,u,1
+148,CollisionsCh0,u,1
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/arm4/ant_debug_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/arm4/ant_debug_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/arm4/ant_debug_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/arm4/ant_debug_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/arm4/ant_debug_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..397fbe5
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/arm4/ant_debug_d52_starterkit_s212.uvproj
@@ -0,0 +1,560 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 DEBUG FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DDEBUG,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 DEBUG FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>application.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\application.c</FilePath>            </File>            <File>
+              <FileName>debug.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\debug.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/arm5_no_packs/ant_debug_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/arm5_no_packs/ant_debug_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/arm5_no_packs/ant_debug_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/arm5_no_packs/ant_debug_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/arm5_no_packs/ant_debug_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..3b4cfb9
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/arm5_no_packs/ant_debug_d52_starterkit_s212.uvprojx
@@ -0,0 +1,584 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 DEBUG FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DDEBUG,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 DEBUG FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>application.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\application.c</FilePath>            </File>            <File>
+              <FileName>debug.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\debug.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..20510ac
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,192 @@
+PROJECT_NAME     := ant_debug_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_debug_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/application.c \
+  $(PROJ_DIR)/debug.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(PROJ_DIR) \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DDEBUG
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DDEBUG
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/armgcc/ant_debug_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/armgcc/ant_debug_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/armgcc/ant_debug_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..c14e92f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3980 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <e> DEBUG_CHANNEL_INCLUDED - Include debug channel.
+//==========================================================
+#ifndef DEBUG_CHANNEL_INCLUDED
+#define DEBUG_CHANNEL_INCLUDED 1
+#endif
+// <o> DEBUG_CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef DEBUG_CHAN_ID_DEV_TYPE
+#define DEBUG_CHAN_ID_DEV_TYPE 8
+#endif
+
+// <o> DEBUG_CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef DEBUG_CHAN_ID_TRANS_TYPE
+#define DEBUG_CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> DEBUG_RF_FREQ - RF Frequency. 
+#ifndef DEBUG_RF_FREQ
+#define DEBUG_RF_FREQ 66
+#endif
+
+// <o> DEBUG_CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef DEBUG_CHAN_PERIOD
+#define DEBUG_CHAN_PERIOD 8192
+#endif
+
+// <o> DEBUG_CHANNEL_NUMBER - Used debug channel number. 
+#ifndef DEBUG_CHANNEL_NUMBER
+#define DEBUG_CHANNEL_NUMBER 1
+#endif
+
+// <o> DEBUG_ANT_OBSERVER_PRIO - Application debug event observer priority. 
+#ifndef DEBUG_ANT_OBSERVER_PRIO
+#define DEBUG_ANT_OBSERVER_PRIO 1
+#endif
+
+// </e>
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 2
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/iar/ant_debug_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/iar/ant_debug_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/iar/ant_debug_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/iar/ant_debug_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/iar/ant_debug_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..107aa8f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/iar/ant_debug_d52_starterkit_s212.ewp
@@ -0,0 +1,1086 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>DEBUG</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>DEBUG</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_debug_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_debug_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_debug_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\application.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\debug.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/iar/ant_debug_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/iar/ant_debug_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/iar/ant_debug_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/ses/ant_debug_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/ses/ant_debug_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..a566537
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/ses/ant_debug_d52_starterkit_s212.emProject
@@ -0,0 +1,109 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_debug_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_debug_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/ant/ant_search_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../..;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;DEBUG;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../application.c" />
+      <file file_name="../../../debug.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/ses/ant_debug_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/ses/ant_debug_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..5b0bd3b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/ses/ant_debug_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_debug_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/debug.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/debug.c
new file mode 100644
index 0000000..5a3365c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/debug.c
@@ -0,0 +1,411 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#include "sdk_config.h"
+#if DEBUG_CHANNEL_INCLUDED
+
+#include "debug.h"
+#include <string.h>
+#include "ant_parameters.h"
+#include "ant_interface.h"
+#include "app_error.h"
+#include "ant_channel_config.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+
+// This index will not be displayed in ObservANT
+#define ANT_DEBUG_FIELD_INVALID               ((uint8_t) 0xFF)                      /**< Invalid field. */
+
+// Indexes within a message
+#define ANT_PAGE_INDEX                        ((uint8_t) 0)                         /**< Page index. */
+#define ANT_FAST_DEBUG_BYTE_INDEX             ((uint8_t) 1)                         /**< Fast debug byte index. */
+
+// ANT Pages
+#define ANT_DEBUG_PAGE_MESSAGE                ((uint8_t) 0xF9)                      /**< Debug page. */
+
+//Filter Commands
+#define ANT_DEBUG_FILTER_COMMAND              ((uint8_t) 3)                         /**< Debug filter command. */
+#define ANT_DEBUG_SUB_COMMAND_FILTER_ADD      ((uint8_t) 1)                         /**< Debug filter sub command: add. */
+#define ANT_DEBUG_SUB_COMMAND_FILTER_CLEAR    ((uint8_t) 2)                         /**< Debug filter sub command: clear. */
+
+#define ANT_RESERVED_BYTE                     ((uint8_t) 0xFF)                      /**< Reserved byte. */
+
+// Misc. defines
+#define ANT_PAGE_DEBUG_KEY0_INDEX             ((uint8_t) 2)                         /**< Debug key index. */
+#define ANT_PAGE_DEBUG_VALUE_SIZE             (sizeof(uint16_t) + sizeof(uint8_t))  /**< Debug value size. */
+
+#define DEBUG_QUEUE_SIZE                      ((uint16_t) 256)                      /**< Debug queue size. */
+
+
+typedef struct
+{
+    uint8_t  index;     /**< Index. */
+    uint16_t value;     /**< Value. */
+    bool     output;    /**< Output. */
+} debug_value_t;
+
+
+static debug_value_t m_debug_queue[DEBUG_QUEUE_SIZE];               /**< List of debug fields (not really a queue). */
+static uint8_t       m_hash_lookup[DEBUG_QUEUE_SIZE];               /**< This array depth has to span all possible indices. */
+static uint8_t       m_queue_size;                                  /**< Queue size. */
+static uint8_t       m_current_index_debug_channel;                 /**< Current index for debug channel. */
+static uint8_t       m_head;                                        /**< Head. */
+static bool          m_selective_debug;                             /**< Selective debug mode - only filtered fields are transmitted. */
+static uint8_t       m_tx_buffer[ANT_STANDARD_DATA_PAYLOAD_SIZE];   /**< Tx buffer. */
+static uint8_t       m_fast_debug_byte;                             /**< Fast debug byte. */
+
+static custom_command_handler_t m_custom_command_callback = NULL;   /**< Custom command callback. */
+
+
+/**
+ * @brief Check if a certain index should be included in a debug message
+ *
+ * @param[in] current_index         Index to check
+ *
+ * @retval true         include
+ * @retval false        do not include
+ */
+static bool ad_output_debug_mesg(uint8_t current_index)
+{
+    if (m_selective_debug)
+    {
+        return (m_debug_queue[current_index].output);
+    }
+    else
+    {
+        return (true);
+    }
+}
+
+
+/**
+ * @brief Constructs the next debug message to go out based on selective debugging
+ *
+ * @param[out] p_current_index      Current field index
+ * @param[out] p_data               Destination of debug message
+ */
+static void ad_debug_page_get(uint8_t * p_data, uint8_t * p_current_index)
+{
+    uint8_t count = 0;
+
+    p_data[0]                         = ANT_DEBUG_PAGE_MESSAGE;
+    p_data[ANT_FAST_DEBUG_BYTE_INDEX] = m_fast_debug_byte;
+
+    if (m_queue_size > 0)
+    {
+        // This is meant to handle both the priority search and selective debug
+        // which are both independent methods of selecting which index should
+        // go out next. So its probably more complicated than it needs to be.
+        while (count < 2) // Two values per ANT message
+        {
+            uint8_t index = ANT_PAGE_DEBUG_KEY0_INDEX + (count * ANT_PAGE_DEBUG_VALUE_SIZE); // Index into ANT message
+
+            if (ad_output_debug_mesg(*p_current_index)) // If ready to output based on the priority
+            {
+                p_data[index]     = m_debug_queue[*p_current_index].index;
+                p_data[index + 1] = (uint8_t) m_debug_queue[*p_current_index].value;
+                p_data[index + 2] = (uint8_t) (m_debug_queue[*p_current_index].value >> 8);
+                count++;
+            }
+            *p_current_index = *p_current_index + 1;
+            if (*p_current_index >= m_queue_size)
+            {
+                *p_current_index = 0;
+            }
+        }
+    }
+    else
+    {
+        memset(&p_data[ANT_PAGE_DEBUG_KEY0_INDEX], ANT_RESERVED_BYTE, 6);
+    }
+}
+
+
+/**
+ * @brief Sets the next broadcast message
+ */
+static void ad_update_tx(void)
+{
+    ad_debug_page_get(m_tx_buffer, &m_current_index_debug_channel);
+    UNUSED_VARIABLE(sd_ant_broadcast_message_tx(DEBUG_CHANNEL_NUMBER,
+                                                ANT_STANDARD_DATA_PAYLOAD_SIZE,
+                                                m_tx_buffer));
+}
+
+
+/**
+ * @brief Decode the command from an ANT event
+ *
+ * Debug filter command format:
+ *
+ * [F9][command][data1][data2][data3][data4][data5][data6]
+ *
+ * F9       - global ANT Debug message page
+ * command  - sub-command
+ * data     - data1 is start of sub-command definition
+ *
+ * @param[in] p_ant_evt The incomming event
+ */
+static void ad_decode_debug_command(ant_evt_t * p_ant_evt)
+{
+    switch (p_ant_evt->message.ANT_MESSAGE_aucPayload[1])
+    {
+        case ANT_DEBUG_FILTER_COMMAND:
+        {
+            if (p_ant_evt->message.ANT_MESSAGE_aucPayload[2] == ANT_DEBUG_SUB_COMMAND_FILTER_ADD) // Set Filter
+            {
+                m_selective_debug = true;
+
+                for (uint8_t index = 3; index < 8; index++) // For each arguement in the debug event (4)
+                {
+                    if (p_ant_evt->message.ANT_MESSAGE_aucPayload[index] != ANT_DEBUG_FIELD_INVALID)
+                    {
+                        uint8_t key = m_hash_lookup[p_ant_evt->message.ANT_MESSAGE_aucPayload[index]];
+
+                        if (key == ANT_DEBUG_FIELD_INVALID)
+                        {
+                            // If key doesn't exist yet then add it to the buffer with a max value.
+                            ad_debug_field_set(p_ant_evt->message.ANT_MESSAGE_aucPayload[index],
+                                               0xFFFF);
+
+                            key = m_hash_lookup[p_ant_evt->message.ANT_MESSAGE_aucPayload[index]];
+                        }
+
+                        m_debug_queue[key].output = true;
+                    }
+                }
+            }
+            else if (p_ant_evt->message.ANT_MESSAGE_aucPayload[2]
+                     == ANT_DEBUG_SUB_COMMAND_FILTER_CLEAR)   // Clear filter
+            {
+                m_selective_debug = false;
+
+                for (uint8_t index = 0; index < m_queue_size; index++)
+                {
+                    m_debug_queue[index].output = false;
+                }
+            }
+            break;
+        }
+
+        default:
+        {
+            /* No implementation needed */
+            break;
+        }
+    }
+}
+
+
+void ad_init(void)
+{
+    uint32_t err_code;
+
+    m_queue_size                  = 0;
+    m_current_index_debug_channel = 0;
+    m_head                        = 0;
+    m_selective_debug             = false;
+    m_fast_debug_byte             = 0xFF;
+
+    for (uint32_t i = 0; i < DEBUG_QUEUE_SIZE; i++)
+    {
+        m_debug_queue[i].index = 0;
+        m_debug_queue[i].value = 0;
+        m_hash_lookup[i]       = ANT_DEBUG_FIELD_INVALID;
+    }
+
+    ant_channel_config_t channel_config =
+    {
+        .channel_number    = DEBUG_CHANNEL_NUMBER,
+        .channel_type      = CHANNEL_TYPE_MASTER,
+        .ext_assign        = 0x00,
+        .rf_freq           = DEBUG_RF_FREQ,
+        .transmission_type = DEBUG_CHAN_ID_TRANS_TYPE,
+        .device_type       = DEBUG_CHAN_ID_DEV_TYPE,
+        .device_number     = (uint16_t) (NRF_FICR->DEVICEID[0]),
+        .channel_period    = DEBUG_CHAN_PERIOD,
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    err_code = ant_channel_init(&channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = sd_ant_channel_open(DEBUG_CHANNEL_NUMBER);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+void ad_custom_command_callback_register(custom_command_handler_t callback)
+{
+    m_custom_command_callback = callback;
+}
+
+
+void ad_debug_field_set(uint8_t index, uint16_t field_value)
+{
+    uint32_t i = m_head;
+
+    // Check if entry already exists, if not add it to the queue.
+    if (m_hash_lookup[index] != ANT_DEBUG_FIELD_INVALID)
+    {
+        i = m_hash_lookup[index];
+    }
+    else
+    {
+        m_hash_lookup[index]        = m_head;
+        m_debug_queue[m_head].index = index;
+
+        m_head++;
+        m_queue_size++;
+    }
+
+    m_debug_queue[i].value = field_value;
+}
+
+
+bool ad_debug_field_get(uint8_t index, uint16_t * p_field_value)
+{
+    debug_value_t value = m_debug_queue[m_hash_lookup[index]];
+
+    if (value.index != ANT_DEBUG_FIELD_INVALID)
+    {
+        *p_field_value = value.value;
+        return true;
+    }
+    return false;
+}
+
+
+void ad_debug_field_increment(uint8_t index)
+{
+    uint16_t value;
+
+    if (ad_debug_field_get(index, &value))
+    {
+        value++;
+        ad_debug_field_set(index, value);
+    }
+}
+
+
+void ad_fast_debug_byte_set(uint8_t fdb_value)
+{
+    m_fast_debug_byte = fdb_value;
+}
+
+
+void ad_error_page_force(uint8_t error_code, uint16_t error_line, const char * file_name)
+{
+    m_tx_buffer[0] = ANT_DEBUG_PAGE_MESSAGE;
+    m_tx_buffer[1] = error_code;
+    m_tx_buffer[2] = ANT_DEBUG_FIELD_FILE_NAME;
+    m_tx_buffer[3] = (uint8_t) file_name[1];
+    m_tx_buffer[4] = (uint8_t) file_name[0];
+    m_tx_buffer[5] = ANT_DEBUG_FIELD_ERR_LINE;
+    m_tx_buffer[6] = (uint8_t)(error_line >> 0);
+    m_tx_buffer[7] = (uint8_t)(error_line >> 8);
+
+    UNUSED_VARIABLE(sd_ant_broadcast_message_tx(DEBUG_CHANNEL_NUMBER,
+                                                ANT_STANDARD_DATA_PAYLOAD_SIZE,
+                                                m_tx_buffer));
+}
+
+/**@brief Function for handling a ANT stack event.
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+static void ant_evt_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    if (p_ant_evt->channel != DEBUG_CHANNEL_NUMBER)
+    {
+        return;
+    }
+    // Transmit GPIO register values on debug channel
+    ad_debug_field_set(ANT_DEBUG_FIELD_GPIO_REGISTER_LOW, (uint16_t)(NRF_GPIO->IN));
+    ad_debug_field_set(ANT_DEBUG_FIELD_GPIO_REGISTER_HIGH, (uint16_t)(NRF_GPIO->IN >> 16));
+
+    switch (p_ant_evt->event)
+    {
+        case EVENT_CHANNEL_COLLISION:   // Intentional fall through
+        case EVENT_TRANSFER_TX_FAILED:  // Intentional fall through
+        case EVENT_TX:
+            ad_update_tx();
+            break;
+
+        case EVENT_RX:
+            switch (p_ant_evt->message.aucMessage[3])
+            {
+                case ANT_DEBUG_PAGE_MESSAGE: // Filter message
+                    ad_decode_debug_command(p_ant_evt);
+                    break;
+
+                default: // Custom debug command
+                    if (m_custom_command_callback != NULL) // Check if callback has been registered
+                    {
+                        m_custom_command_callback(&p_ant_evt->message.aucMessage[3]);
+                    }
+                    break;
+            }
+            break;
+
+        default:
+            /* No implementation needed */
+            break;
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, DEBUG_ANT_OBSERVER_PRIO, ant_evt_handler, NULL);
+
+
+#endif // DEBUG_CHANNEL_INCLUDED
+
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/debug.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/debug.h
new file mode 100644
index 0000000..b2e8d2e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/debug.h
@@ -0,0 +1,145 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#ifndef ANT_DEBUG_H__
+#define ANT_DEBUG_H__
+
+/**
+ * @file debug.h
+ * @brief Debug module header
+ * @ingroup debug
+ */
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Debug field definitions
+#define ANT_DEBUG_FIELD_BUTTON_A_STATUS         ((uint8_t) 0)       /**< Status button A. */
+#define ANT_DEBUG_FIELD_BUTTON_B_STATUS         ((uint8_t) 1)       /**< Status button B. */
+#define ANT_DEBUG_FIELD_BUTTON_C_STATUS         ((uint8_t) 2)       /**< Status button C. */
+#define ANT_DEBUG_FIELD_BUTTON_D_STATUS         ((uint8_t) 3)       /**< Status button D. */
+#define ANT_DEBUG_FIELD_ERR_LINE                ((uint8_t) 4)       /**< Error line. */
+#define ANT_DEBUG_FIELD_FILE_NAME               ((uint8_t) 5)       /**< File name. */
+#define ANT_DEBUG_FIELD_GPIO_REGISTER_LOW       ((uint8_t) 6)       /**< GPIO register low. */
+#define ANT_DEBUG_FIELD_GPIO_REGISTER_HIGH      ((uint8_t) 7)       /**< GPIO register high. */
+
+#define ANT_DEBUG_FIELD_RX_TOTAL_CH0            ((uint8_t) 132)     /**< Total Rx channel 0. */
+#define ANT_DEBUG_FIELD_TX_TOTAL_CH0            ((uint8_t) 140)     /**< Total Tx channel 0. */
+#define ANT_DEBUG_FIELD_COLLISIONS_CH0          ((uint8_t) 148)     /**< Total collisions channel 0.*/
+
+
+/**@brief Function prototype for handler of reverse direction commands on debug channel*/
+typedef void (*custom_command_handler_t)(uint8_t const * const p_command);
+
+/** @brief Function to initialize the debug channel.
+ *
+ * Sets up debug queue and opens channel.
+ * Device number will be set the lower part of the serial number
+ */
+void ad_init(void);
+
+/**
+ * @brief Register a callback function for custom commands sent over the debug channel.
+ * This allows custom commands received over the debug channel to be used by the main application.
+ *
+ * @param[in] callback  The pointer to a function which will be called when a custom command is received
+ */
+void ad_custom_command_callback_register(custom_command_handler_t callback);
+
+/**
+ * @brief Function to set the value of a specific debug field
+ *
+ * @param[in] index     Index of debug field to be set
+ * @param[in] value     New field value
+ */
+void ad_debug_field_set(uint8_t index, uint16_t field_value);
+
+/**
+ * @brief Retrieve the value of a particular debug field
+ *
+ * @param[in]  index            Index of value to retrieve
+ * @param[out] p_field_value    Retrieved value
+ */
+bool ad_debug_field_get(uint8_t index, uint16_t * p_field_value);
+
+/**
+ * @brief Adds 1 to the value of a debug field
+ *
+ * @param[in] index           Index of the field to be incremented
+ */
+void ad_debug_field_increment(uint8_t index);
+
+/**
+ * @brief Sets the fast debug byte
+ *
+ * @param[in] fdb_value       Value to assign to the fast debug byte
+ */
+void ad_fast_debug_byte_set(uint8_t fdb_value);
+
+/**
+ * @brief Forces debug channel to transmit to this error code, file name and line number.
+ * Use for assert functions only.
+ *
+ * @param[in] error_code       Error code
+ * @param[in] error_line       Line number where error occurred
+ * @param[in] p_file_name      Pointer to char array containing file name where error occured
+ */
+void ad_error_page_force(uint8_t error_code, uint16_t error_line, const char * p_file_name);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // ANT_DEBUG_H__
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/main.c
new file mode 100644
index 0000000..05f8461
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/main.c
@@ -0,0 +1,208 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/*
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include "nrf.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "bsp.h"
+#include "boards.h"
+#include "hardfault.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+#include "application.h"
+#include "debug.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+#define BTN_ID_ERROR                    0                   /**< ID of button used to test error handling. */
+
+/**@brief Function for error handling, which demonstrates usage of the ANT debug
+ * module to output debug information over the debug channel on an assertion
+ *
+ * @param[in] error_code  Error code supplied to the handler.
+ * @param[in] line_num    Line number where the handler is called.
+ * @param[in] p_file_name Pointer to the file name.
+ */
+void app_error_fault_handler(uint32_t id, uint32_t pc, uint32_t info)
+{
+    #if DEBUG_CHANNEL_INCLUDED
+    error_info_t * p_error_info = (error_info_t *)info;
+    char     file_name[2];
+    uint32_t file_name_len = strlen((char *)p_error_info->p_file_name);
+
+    file_name[0] = '\0';
+    file_name[1] = '\0';
+
+    for (uint32_t i = 0; i < file_name_len; i++)
+    {
+        if ((p_error_info->p_file_name[i] != '.')
+         && (p_error_info->p_file_name[i] != '/')
+         && (p_error_info->p_file_name[i] != '\\'))
+        {
+            file_name[0] = p_error_info->p_file_name[i + 1];
+            file_name[1] = p_error_info->p_file_name[i];
+            break;
+        }
+    }
+
+    ad_error_page_force((uint8_t)p_error_info->err_code,
+                        (uint16_t)p_error_info->line_num,
+                        file_name);
+    #endif // DEBUG_CHANNEL_INCLUDED
+
+    bsp_board_leds_on();
+
+    for (;;)
+    {
+        // No implementation needed.
+    }
+}
+
+/**@brief Function for handling bsp events.
+ */
+void bsp_evt_handler(bsp_event_t evt)
+{
+    switch (evt)
+    {
+        case BSP_EVENT_RESET:
+            APP_ERROR_HANDLER(NRF_ERROR_INTERNAL);
+            break;
+
+        default:
+            break; // No implementation needed
+    }
+}
+
+/**@brief Function for the Timer and BSP initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                        bsp_evt_handler);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_event_to_button_action_assign(BTN_ID_ERROR,
+                                                 BSP_BUTTON_ACTION_LONG_PUSH,
+                                                 BSP_EVENT_RESET);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for ANT stack initialization.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    app_channel_setup();
+
+    #if DEBUG_CHANNEL_INCLUDED
+    // Setup and open Debug Channel
+    ad_init();
+    ad_custom_command_callback_register(app_custom_debug_command_handler);
+    #endif // DEBUG_CHANNEL_INCLUDED
+
+    NRF_LOG_INFO("ANT Debug example started.");
+
+    // Enter main loop
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
+
+
+/**
+ *@}
+ **/
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/arm4/ant_debug_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/arm4/ant_debug_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/arm4/ant_debug_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/arm4/ant_debug_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/arm4/ant_debug_pca10040_s212.uvproj
new file mode 100644
index 0000000..7653c4c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/arm4/ant_debug_pca10040_s212.uvproj
@@ -0,0 +1,557 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET DEBUG FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DDEBUG,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET DEBUG FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>application.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\application.c</FilePath>            </File>            <File>
+              <FileName>debug.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\debug.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/arm5_no_packs/ant_debug_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/arm5_no_packs/ant_debug_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/arm5_no_packs/ant_debug_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/arm5_no_packs/ant_debug_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/arm5_no_packs/ant_debug_pca10040_s212.uvprojx
new file mode 100644
index 0000000..62474e3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/arm5_no_packs/ant_debug_pca10040_s212.uvprojx
@@ -0,0 +1,581 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET DEBUG FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DDEBUG,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET DEBUG FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>application.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\application.c</FilePath>            </File>            <File>
+              <FileName>debug.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\debug.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..623fef9
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,195 @@
+PROJECT_NAME     := ant_debug_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_debug_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/application.c \
+  $(PROJ_DIR)/debug.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(PROJ_DIR) \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DDEBUG
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DDEBUG
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/armgcc/ant_debug_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/armgcc/ant_debug_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/armgcc/ant_debug_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..26f0954
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3924 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <e> DEBUG_CHANNEL_INCLUDED - Include debug channel.
+//==========================================================
+#ifndef DEBUG_CHANNEL_INCLUDED
+#define DEBUG_CHANNEL_INCLUDED 1
+#endif
+// <o> DEBUG_CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef DEBUG_CHAN_ID_DEV_TYPE
+#define DEBUG_CHAN_ID_DEV_TYPE 8
+#endif
+
+// <o> DEBUG_CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef DEBUG_CHAN_ID_TRANS_TYPE
+#define DEBUG_CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> DEBUG_RF_FREQ - RF Frequency. 
+#ifndef DEBUG_RF_FREQ
+#define DEBUG_RF_FREQ 66
+#endif
+
+// <o> DEBUG_CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef DEBUG_CHAN_PERIOD
+#define DEBUG_CHAN_PERIOD 8192
+#endif
+
+// <o> DEBUG_CHANNEL_NUMBER - Used debug channel number. 
+#ifndef DEBUG_CHANNEL_NUMBER
+#define DEBUG_CHANNEL_NUMBER 1
+#endif
+
+// <o> DEBUG_ANT_OBSERVER_PRIO - Application debug event observer priority. 
+#ifndef DEBUG_ANT_OBSERVER_PRIO
+#define DEBUG_ANT_OBSERVER_PRIO 1
+#endif
+
+// </e>
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 2
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/iar/ant_debug_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/iar/ant_debug_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/iar/ant_debug_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/iar/ant_debug_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/iar/ant_debug_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/iar/ant_debug_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/iar/ant_debug_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/iar/ant_debug_pca10040_s212.ewp
new file mode 100644
index 0000000..f4568ef
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/iar/ant_debug_pca10040_s212.ewp
@@ -0,0 +1,1089 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>DEBUG</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>DEBUG</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_debug_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_debug_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_debug_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\application.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\debug.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/ses/ant_debug_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/ses/ant_debug_pca10040_s212.emProject
new file mode 100644
index 0000000..3711b55
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/ses/ant_debug_pca10040_s212.emProject
@@ -0,0 +1,108 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_debug_pca10040_s212" target="8" version="2">
+  <project Name="ant_debug_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/ant/ant_search_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../..;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;DEBUG;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../application.c" />
+      <file file_name="../../../debug.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/ses/ant_debug_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/ses/ant_debug_pca10040_s212.emSession
new file mode 100644
index 0000000..91b9db5
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/ses/ant_debug_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_debug_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_debug/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/ant_fs_client.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/ant_fs_client.eww
new file mode 100644
index 0000000..1e7b818
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/ant_fs_client.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_fs_client_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_fs_client_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/arm4/ant_fs_client_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/arm4/ant_fs_client_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/arm4/ant_fs_client_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/arm4/ant_fs_client_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/arm4/ant_fs_client_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..63d306f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/arm4/ant_fs_client_d52_starterkit_s212.uvproj
@@ -0,0 +1,560 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_fs;..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_fs;..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>mem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\mem.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>antfs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_fs\antfs.c</FilePath>            </File>            <File>
+              <FileName>crc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_fs\crc.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/arm5_no_packs/ant_fs_client_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/arm5_no_packs/ant_fs_client_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/arm5_no_packs/ant_fs_client_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/arm5_no_packs/ant_fs_client_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/arm5_no_packs/ant_fs_client_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..6e193e5
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/arm5_no_packs/ant_fs_client_d52_starterkit_s212.uvprojx
@@ -0,0 +1,584 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_fs;..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_fs;..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>mem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\mem.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>antfs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_fs\antfs.c</FilePath>            </File>            <File>
+              <FileName>crc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_fs\crc.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..5c3d16f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,191 @@
+PROJECT_NAME     := ant_fs_client_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_fs_client_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \
+  $(SDK_ROOT)/components/ant/ant_fs/antfs.c \
+  $(SDK_ROOT)/components/ant/ant_fs/crc.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(PROJ_DIR)/mem.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(PROJ_DIR) \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/ant/ant_key_manager \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_fs \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/ant/ant_key_manager/config \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/armgcc/ant_fs_client_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/armgcc/ant_fs_client_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/armgcc/ant_fs_client_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..fd7bf59
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,4060 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> CLIENT_DEV_TYPE - Beacon device type. 
+#ifndef CLIENT_DEV_TYPE
+#define CLIENT_DEV_TYPE 416
+#endif
+
+// <o> CLIENT_MANUF_ID - Beacon manufacturer ID. 
+#ifndef CLIENT_MANUF_ID
+#define CLIENT_MANUF_ID 2
+#endif
+
+// <o> CLIENT_SERIAL_NUMBER - Serial number of client device. 
+#ifndef CLIENT_SERIAL_NUMBER
+#define CLIENT_SERIAL_NUMBER 12345
+#endif
+
+// <e> MEM_WRITE_LOG_ENABLED - Enable memory write log.
+//==========================================================
+#ifndef MEM_WRITE_LOG_ENABLED
+#define MEM_WRITE_LOG_ENABLED 0
+#endif
+// <o> MEM_WRITE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef MEM_WRITE_LOG_LEVEL
+#define MEM_WRITE_LOG_LEVEL 3
+#endif
+
+// <o> MEM_WRITE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef MEM_WRITE_INFO_COLOR
+#define MEM_WRITE_INFO_COLOR 0
+#endif
+
+// <o> MEM_WRITE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef MEM_WRITE_DEBUG_COLOR
+#define MEM_WRITE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <e> ANTFS_ENABLED - ant_fs - ANT File Share module.
+//==========================================================
+#ifndef ANTFS_ENABLED
+#define ANTFS_ENABLED 1
+#endif
+// <o> ANTFS_CONFIG_NETWORK_NUMBER - ANT-FS network number. 
+#ifndef ANTFS_CONFIG_NETWORK_NUMBER
+#define ANTFS_CONFIG_NETWORK_NUMBER 0
+#endif
+
+// <o> ANTFS_CONFIG_CHANNEL_NUMBER - ANT-FS channel number. 
+#ifndef ANTFS_CONFIG_CHANNEL_NUMBER
+#define ANTFS_CONFIG_CHANNEL_NUMBER 0
+#endif
+
+// <o> ANTFS_CONFIG_PAIRING_TIMEOUT - Pairing timeout - how long the UI will wait for a response to a pairing request before switching to the link layer, in seconds. 
+#ifndef ANTFS_CONFIG_PAIRING_TIMEOUT
+#define ANTFS_CONFIG_PAIRING_TIMEOUT 120
+#endif
+
+// <o> ANTFS_CONFIG_LINK_COMMAND_TIMEOUT - Command timeout - how long the client will wait without receiving any commands before switching to the link layer, in seconds. 
+#ifndef ANTFS_CONFIG_LINK_COMMAND_TIMEOUT
+#define ANTFS_CONFIG_LINK_COMMAND_TIMEOUT 10
+#endif
+
+// <o> ANTFS_CONFIG_TRANS_TYPE - ANT-FS Transmission Type. 
+#ifndef ANTFS_CONFIG_TRANS_TYPE
+#define ANTFS_CONFIG_TRANS_TYPE 10
+#endif
+
+// <o> ANTFS_CONFIG_DEVICE_TYPE - ANT device type for channel configuration. 
+#ifndef ANTFS_CONFIG_DEVICE_TYPE
+#define ANTFS_CONFIG_DEVICE_TYPE 1
+#endif
+
+// <o> ANTFS_CONFIG_BEACON_STATUS_PERIOD  - ANT-FS Beacon Message Period.
+ 
+// <0=> 0.5 Hz 
+// <1=> 1 Hz 
+// <2=> 2 Hz 
+// <3=> 4 Hz 
+// <4=> 8 Hz 
+
+#ifndef ANTFS_CONFIG_BEACON_STATUS_PERIOD
+#define ANTFS_CONFIG_BEACON_STATUS_PERIOD 3
+#endif
+
+// <o> ANTFS_CONFIG_TRANSMIT_POWER  - ANT Transmit Power.
+ 
+// <0=> Lowest ANT Tx power level setting. (-20dBm) 
+// <1=> ANT Tx power > Lvl 0. (-12dBm) 
+// <2=> ANT Tx power > Lvl 1. (-4dBm) 
+// <3=> ANT Tx power > Lvl 2. Default tx power level. (0dBm) 
+// <4=> ANT Tx power > Lvl 3. (+4dBm) 
+// <128=> Custom tx power selection 
+
+#ifndef ANTFS_CONFIG_TRANSMIT_POWER
+#define ANTFS_CONFIG_TRANSMIT_POWER 3
+#endif
+
+// <o> ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER - ANT Custom Transmit Power. 
+#ifndef ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER
+#define ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER 0
+#endif
+
+// <q> ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED  - Use pairing and key exchange authentication.
+ 
+
+#ifndef ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED
+#define ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED 1
+#endif
+
+// <q> ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED  - Use passkey authentication.
+ 
+
+#ifndef ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED
+#define ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED 1
+#endif
+
+// <q> ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED  - Allow host to bypass authentication.
+ 
+
+#ifndef ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED
+#define ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED 1
+#endif
+
+// <q> ANTFS_CONFIG_UPLOAD_ENABLED  - Support upload operation.
+ 
+
+#ifndef ANTFS_CONFIG_UPLOAD_ENABLED
+#define ANTFS_CONFIG_UPLOAD_ENABLED 1
+#endif
+
+// <q> ANTFS_CONFIG_DEBUG_LED_ENABLED  - Enables LED debug in the module.
+ 
+
+#ifndef ANTFS_CONFIG_DEBUG_LED_ENABLED
+#define ANTFS_CONFIG_DEBUG_LED_ENABLED 1
+#endif
+
+// </e>
+
+// <q> ANT_KEY_MANAGER_ENABLED  - ant_key_manager - Software Component
+ 
+
+#ifndef ANT_KEY_MANAGER_ENABLED
+#define ANT_KEY_MANAGER_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/iar/ant_fs_client_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/iar/ant_fs_client_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/iar/ant_fs_client_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/iar/ant_fs_client_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/iar/ant_fs_client_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..7b2a101
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/iar/ant_fs_client_d52_starterkit_s212.ewp
@@ -0,0 +1,1086 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_fs</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_fs</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_fs_client_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_fs_client_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_fs_client_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_fs\antfs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_fs\crc.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\mem.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/iar/ant_fs_client_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/iar/ant_fs_client_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/iar/ant_fs_client_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/ses/ant_fs_client_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/ses/ant_fs_client_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..e09c711
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/ses/ant_fs_client_d52_starterkit_s212.emProject
@@ -0,0 +1,109 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_fs_client_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_fs_client_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_fs;../../../../../../../components/ant/ant_key_manager;../../../../../../../components/ant/ant_key_manager/config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../..;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" />
+      <file file_name="../../../../../../../components/ant/ant_fs/antfs.c" />
+      <file file_name="../../../../../../../components/ant/ant_fs/crc.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../../../mem.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/ses/ant_fs_client_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/ses/ant_fs_client_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..328bb7d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/ses/ant_fs_client_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_fs_client_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/main.c
new file mode 100644
index 0000000..272e206
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/main.c
@@ -0,0 +1,563 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2012
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/*
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdint.h>
+#include <stdio.h>
+#include "mem.h"
+#include "bsp.h"
+#include "antfs.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "hardfault.h"
+#include "ant_parameters.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+#define APP_TIMER_OP_QUEUE_SIZE     0x04                            /**< Size of timer operation queues. */
+#define APP_ANT_OBSERVER_PRIO       1                               /**< Application's ANT observer priority. You shouldn't need to modify this value. */
+
+static const uint8_t m_friendly_name[] = "Ref Design";              /**< Client's friendly name. */
+static const uint8_t m_pass_key[]      = {0x01, 0x02, 0x03, 0x04,\
+                                          0x05, 0x06, 0x07, 0x08,\
+                                          0x09, 0x0A, 0x0B, 0x0C,\
+                                          0x0D, 0x0E, 0x0F, 0x10};  /**< Authentication string (passkey). */
+
+static antfs_dir_struct_t       m_temp_dir_structure;               /**< Current directory file structure. */
+static antfs_request_info_t     m_response_info;                    /**< Parameters for response to a download and upload request. */
+static uint16_t                 m_file_index;                       /**< Index of the current file downloaded/uploaded. */
+static uint32_t                 m_file_offset;                      /**< Current offset. */
+static uint16_t                 m_current_crc;                      /**< Current CRC. */
+static bool                     m_upload_success;                   /**< Upload response. */
+
+
+/**@brief Function for processing ANTFS pairing request event.
+ */
+static void event_pairing_request_handle(void)
+{
+    const char * p_name = antfs_hostname_get();
+    if (p_name != NULL)
+    {
+        NRF_LOG_INFO("host name: %s", (uint32_t)p_name);
+    }
+}
+
+
+/**@brief Function for processing ANTFS download request event.
+ *
+ * @param[in] p_event The event extracted from the queue to be processed.
+ */
+static void event_download_request_handle(const antfs_event_return_t * p_event)
+{
+    uint8_t response = RESPONSE_MESSAGE_OK;
+
+    // Grab request info.
+    m_file_index = p_event->file_index;
+
+    // Read file information from directory
+    if (mem_file_info_get(m_file_index, &m_temp_dir_structure))
+    {
+        // Check permissions.
+        if (!(m_temp_dir_structure.general_flags & ANTFS_DIR_READ_MASK))
+        {
+            response = RESPONSE_MESSAGE_NOT_AVAILABLE;
+            NRF_LOG_INFO("Download request denied: file n/a for reading");
+        }
+
+        // Set response parameters.
+        m_response_info.file_index.data           = m_file_index;
+        // File size (per directory).
+        m_response_info.file_size.data            = m_temp_dir_structure.file_size_in_bytes;
+        // File is being read, so maximum size is the file size.
+        m_response_info.max_file_size             = m_temp_dir_structure.file_size_in_bytes;
+        // Send the entire file in a single block if possible.
+        m_response_info.max_burst_block_size.data = m_temp_dir_structure.file_size_in_bytes;
+    }
+    else // Index not found.
+    {
+        response                                  = RESPONSE_MESSAGE_NOT_EXIST;
+        m_response_info.file_index.data           = 0;
+        m_response_info.file_size.data            = 0;
+        m_response_info.max_file_size             = 0;
+        m_response_info.max_burst_block_size.data = 0;
+        NRF_LOG_INFO("Download request denied: file does not exist");
+    }
+
+    antfs_download_req_resp_prepare(response, &m_response_info);
+}
+
+
+/**@brief Function for processing ANTFS download data event.
+ *
+ * @param[in] p_event The event extracted from the queue to be processed.
+ */
+static void event_download_data_handle(const antfs_event_return_t * p_event)
+{
+    // This example does not interact with a file system, and it does not account for latency for
+    // reading or writing a file from EEPROM/flash. Prefetching the file might be useful to feed the
+    // data to download in order to maintain the burst timing.
+    if (m_file_index == p_event->file_index)
+    {
+        // Only send data for a file index matching the download request.
+
+        // Burst data block size * 8 bytes per burst packet.
+        uint8_t buffer[ANTFS_BURST_BLOCK_SIZE * 8];
+        // Offset specified by client.
+        const uint32_t offset     = p_event->offset;
+        // Size of requested block of data.
+        const uint32_t data_bytes = p_event->bytes;
+
+        // Read block of data from memory.
+        mem_file_read(m_file_index, offset, buffer, data_bytes);
+
+        // @note: Suppress return value as no use case for handling it exists.
+        UNUSED_RETURN_VALUE(antfs_input_data_download(m_file_index, offset, data_bytes, buffer));
+    }
+}
+
+
+/**@brief Function for processing ANTFS upload request data event.
+ *
+ * @param[in] p_event The event extracted from the queue to be processed.
+ */
+static void event_upload_request_handle(const antfs_event_return_t * p_event)
+{
+    uint8_t response = RESPONSE_MESSAGE_OK;
+
+    if ((p_event->offset == MAX_ULONG))
+    {
+        // Requesting to resume an upload.
+
+        if (m_file_index != p_event->file_index)
+        {
+            // We do not have a save point for this file.
+            m_file_offset = 0;
+            m_current_crc = 0;
+        }
+    }
+    else
+    {
+        // This is a new upload.
+
+        // Use requested offset and reset CRC.
+        m_file_offset = p_event->offset;
+        m_current_crc = 0;
+    }
+
+    m_file_index = p_event->file_index;
+
+    // Read file information from directory.
+    if (mem_file_info_get(m_file_index, &m_temp_dir_structure))
+    {
+        // Check permissions.
+        if (!(m_temp_dir_structure.general_flags & ANTFS_DIR_WRITE_MASK))
+        {
+            response = RESPONSE_MESSAGE_NOT_AVAILABLE;
+            NRF_LOG_INFO("Upload request denied: file n/a for writing");
+        }
+
+        // Set response parameters.
+        m_response_info.file_index.data           = m_file_index;
+        // Current valid file size is the last offset written to the file.
+        m_response_info.file_size.data            = m_file_offset;
+        // Space available for writing is the file size, as specified on directory.
+        m_response_info.max_file_size             = m_temp_dir_structure.file_size_in_bytes;
+        // Get the entire file in a single burst if possible.
+        m_response_info.max_burst_block_size.data = m_temp_dir_structure.file_size_in_bytes;
+        // Last valid CRC.
+        m_response_info.file_crc                  = m_current_crc;
+    }
+    else
+    {
+        // Index not found.
+        response                                  = RESPONSE_MESSAGE_NOT_EXIST;
+        m_response_info.file_index.data           = m_file_index;
+        m_response_info.file_size.data            = 0;
+        m_response_info.max_file_size             = 0;
+        m_response_info.max_burst_block_size.data = 0;
+        m_response_info.file_crc                  = 0;
+        NRF_LOG_INFO("Upload request denied: file does not exist");
+    }
+
+    m_upload_success = true;
+
+    // @note: Suppress return value as no use case for handling it exists.
+    UNUSED_RETURN_VALUE(antfs_upload_req_resp_transmit(response, &m_response_info));
+}
+
+
+/**@brief Function for processing ANTFS upload data event.
+ *
+ * @param[in] p_event The event extracted from the queue to be processed.
+ */
+static void event_upload_data_handle(const antfs_event_return_t * p_event)
+{
+    // This example does not interact with a file system, and it does not account for latency for
+    // reading or writing a file from EEPROM/flash. Buffering and other strategies might be useful
+    // to handle a received upload, while maintaining the burst timing.
+    if (m_upload_success && (m_file_index == p_event->file_index))
+    {
+        // Offset requested for upload.
+        const uint32_t offset     = p_event->offset;
+        // Size of current block of data.
+        const uint32_t data_bytes = p_event->bytes;
+
+        // Write data to file.
+        if (!mem_file_write(m_file_index, offset, p_event->data, data_bytes))
+        {
+            // Failed to write the data to system; do not attempt to write any more data after this,
+            // and set upload response as FAIL.
+            m_upload_success = false;
+            NRF_LOG_INFO("Failed to write file to system");
+            NRF_LOG_INFO("Current offset %u, ", offset);
+        }
+        else
+        {
+            // Data was written successfully:
+            // - update offset
+            // - update current CRC.
+            m_file_offset = offset + data_bytes;
+            m_current_crc = p_event->crc;
+        }
+    }
+}
+
+
+/**@brief Function for processing ANTFS upload complete event.
+ */
+static void event_upload_complete_handle(void)
+{
+    NRF_LOG_INFO("ANTFS_EVENT_UPLOAD_COMPLETE");
+
+    // @note: Suppress return value as no use case for handling it exists.
+    UNUSED_RETURN_VALUE(antfs_upload_data_resp_transmit(m_upload_success));
+    if (m_upload_success)
+    {
+        m_file_offset = 0;
+    }
+}
+
+
+/**@brief Function for processing ANTFS erase request event.
+ *
+ * @param[in] p_event The event extracted from the queue to be processed.
+ */
+static void event_erase_request_handle(const antfs_event_return_t * p_event)
+{
+    uint8_t response = RESPONSE_MESSAGE_OK;
+    m_file_index     = p_event->file_index;
+
+    if (m_file_index != 0)
+    {
+        // Read file information from directory.
+        if (mem_file_info_get(m_file_index, &m_temp_dir_structure))
+        {
+            // Check permissions.
+            if (!(m_temp_dir_structure.general_flags & ANTFS_DIR_ERASE_MASK))
+            {
+                response = RESPONSE_MESSAGE_FAIL;
+                NRF_LOG_INFO("Erase request denied: file n/a for erasing");
+            }
+            else
+            {
+                // Erase file.
+                if (!mem_file_erase(m_file_index))
+                {
+                    response = RESPONSE_MESSAGE_FAIL;
+                }
+            }
+        }
+        else
+        {
+            // Index not found.
+            response = RESPONSE_MESSAGE_FAIL;
+            NRF_LOG_INFO("Erase request denied: file does not exist");
+        }
+    }
+    else
+    {
+        // Should not delete the directory.
+        response = RESPONSE_MESSAGE_FAIL;
+        NRF_LOG_INFO("Erase request denied: can not delete directory");
+    }
+
+    antfs_erase_req_resp_transmit(response);
+}
+
+
+/**@brief Function for extracting and processing a ANTFS events.
+ *
+ */
+static void antfs_event_extract_and_process(void)
+{
+    antfs_event_return_t antfs_event;
+
+    while (antfs_event_extract(&antfs_event))
+    {
+        switch (antfs_event.event)
+        {
+            case ANTFS_EVENT_OPEN_COMPLETE:
+                NRF_LOG_INFO("ANTFS_EVENT_OPEN_COMPLETE");
+                break;
+
+            case ANTFS_EVENT_CLOSE_COMPLETE:
+                NRF_LOG_INFO("ANTFS_EVENT_CLOSE_COMPLETE");
+                break;
+
+            case ANTFS_EVENT_LINK:
+                NRF_LOG_INFO("ANTFS_EVENT_LINK");
+                break;
+
+            case ANTFS_EVENT_AUTH:
+                NRF_LOG_INFO("ANTFS_EVENT_AUTH");
+                break;
+
+            case ANTFS_EVENT_TRANS:
+                NRF_LOG_INFO("ANTFS_EVENT_TRANS");
+                break;
+
+            case ANTFS_EVENT_PAIRING_REQUEST:
+                NRF_LOG_INFO("ANTFS_EVENT_PAIRING_REQUEST");
+                event_pairing_request_handle();
+                break;
+
+            case ANTFS_EVENT_PAIRING_TIMEOUT:
+                NRF_LOG_INFO("ANTFS_EVENT_PAIRING_TIMEOUT");
+                break;
+
+            case ANTFS_EVENT_DOWNLOAD_REQUEST:
+                NRF_LOG_INFO("ANTFS_EVENT_DOWNLOAD_REQUEST");
+                event_download_request_handle(&antfs_event);
+                break;
+
+            case ANTFS_EVENT_DOWNLOAD_START:
+                NRF_LOG_INFO("ANTFS_EVENT_DOWNLOAD_START");
+                break;
+
+            case ANTFS_EVENT_DOWNLOAD_REQUEST_DATA:
+                event_download_data_handle(&antfs_event);
+                break;
+
+            case ANTFS_EVENT_DOWNLOAD_COMPLETE:
+                NRF_LOG_INFO("ANTFS_EVENT_DOWNLOAD_COMPLETE");
+                break;
+
+            case ANTFS_EVENT_DOWNLOAD_FAIL:
+                NRF_LOG_INFO("ANTFS_EVENT_DOWNLOAD_FAIL");
+                break;
+
+            case ANTFS_EVENT_UPLOAD_REQUEST:
+                NRF_LOG_INFO("ANTFS_EVENT_UPLOAD_REQUEST");
+                event_upload_request_handle(&antfs_event);
+                break;
+
+            case ANTFS_EVENT_UPLOAD_START:
+                NRF_LOG_INFO("ANTFS_EVENT_UPLOAD_START");
+                break;
+
+            case ANTFS_EVENT_UPLOAD_DATA:
+                NRF_LOG_INFO("ANTFS_EVENT_UPLOAD_DATA");
+                event_upload_data_handle(&antfs_event);
+                break;
+
+            case ANTFS_EVENT_UPLOAD_FAIL:
+                NRF_LOG_INFO("ANTFS_EVENT_UPLOAD_FAIL");
+                // @note: Suppress return value as no use case for handling it exists.
+                UNUSED_RETURN_VALUE(antfs_upload_data_resp_transmit(false));
+                break;
+
+            case ANTFS_EVENT_UPLOAD_COMPLETE:
+                NRF_LOG_INFO("ANTFS_EVENT_UPLOAD_COMPLETE");
+                event_upload_complete_handle();
+                break;
+
+            case ANTFS_EVENT_ERASE_REQUEST:
+                NRF_LOG_INFO("ANTFS_EVENT_ERASE_REQUEST");
+                event_erase_request_handle(&antfs_event);
+                break;
+
+            default:
+                break;
+        }
+    }
+}
+
+
+/**@brief Function for handling bsp events.
+ */
+static void bsp_evt_handler(bsp_event_t event)
+{
+    switch (event)
+    {
+        case BSP_EVENT_KEY_0:
+            if (antfs_pairing_resp_transmit(true))
+            {
+                // @note: If pairing is supported by the implementation the only reason this code gets
+                // executed would be if the protocol is in incorrect state, which would imply an error
+                // either in the host or the client implementation.
+            }
+            break;
+
+        case BSP_EVENT_KEY_1:
+            UNUSED_RETURN_VALUE(antfs_pairing_resp_transmit(false));
+            break;
+
+        default:
+            return;
+    }
+
+    // Process ANT-FS event queue.
+    antfs_event_extract_and_process();
+}
+
+
+/**@brief Function for handling a ANT stack event.
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+static void ant_evt_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    antfs_message_process(p_ant_evt->message.aucMessage);
+    antfs_event_extract_and_process();
+}
+
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, APP_ANT_OBSERVER_PRIO, ant_evt_handler, NULL);
+
+
+/**@brief Function for configuring and setting up the SoftDevice.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**
+ * @brief Function for setup all thinks not directly associated witch ANT stack/protocol.
+ * @desc Initialization of: @n
+ *         - app_tarce for debug.
+ *         - app_timer, presetup for bsp.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                        bsp_evt_handler);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+
+/**@brief Function for application main entry, does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+
+    const antfs_params_t params =
+    {
+        CLIENT_SERIAL_NUMBER,
+        CLIENT_DEV_TYPE,
+        CLIENT_MANUF_ID,
+        ANTFS_LINK_FREQ,
+        {ANTFS_DEFAULT_BEACON | DATA_AVAILABLE_FLAG_MASK},
+        m_pass_key,
+        m_friendly_name
+    };
+
+    antfs_init(&params, nrf_pwr_mgmt_run);
+    antfs_channel_setup();
+
+    NRF_LOG_INFO("ANT-FS Client example started.");
+
+    for (;; )
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/mem.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/mem.c
new file mode 100644
index 0000000..8d88292
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/mem.c
@@ -0,0 +1,221 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2012
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#include "mem.h"
+#include <string.h>
+
+#define NRF_LOG_MODULE_NAME MEM
+
+#if MEM_WRITE_LOG_ENABLED
+#define NRF_LOG_LEVEL       MEM_WRITE_LOG_LEVEL
+#define NRF_LOG_INFO_COLOR  MEM_WRITE_INFO_COLOR
+#define NRF_LOG_DEBUG_COLOR MEM_WRITE_DEBUG_COLOR
+#else //MEM_WRITE_LOG_ENABLED
+#define NRF_LOG_LEVEL       0
+#endif //MEM_WRITE_LOG_ENABLED
+#include "nrf_log.h"
+NRF_LOG_MODULE_REGISTER();
+
+#define MEM_DIR_SIZE          9u                     /**< Example directory size. */
+#define MEM_DIR_INVALID_INDEX 0xFFFFu                /**< Defined invalid index value. */
+
+// Sample constant directory structure.
+typedef struct
+{
+    antfs_dir_header_t header;                       /**< Directory header. */
+    antfs_dir_struct_t directory_file[MEM_DIR_SIZE]; /**< Array of directory entry structures. */
+} directory_file_t;
+
+// Sample constant directory.
+static const directory_file_t m_directory =
+{
+    {
+        ANTFS_DIR_STRUCT_VERSION,                             // Version 1, length of each subsequent entry = 16 bytes, system time not used.
+        sizeof(antfs_dir_struct_t),
+        0, 0, 0, 0, 0, 0, 0, 0
+    },
+    {
+        {9, 0,        4, 0, 0, 0xA0, 0x00000000, 0x000296BC}, // Index 9, data type 0, identifier 4, read and erase, 0 bytes in length.
+        {7, 1,        0, 0, 0, 0x60, 0x00000000, 0x00007E71}, // Index 7, data type 1, identifier 0, write and erase, 0 bytes in length.
+        {8, 1,        1, 0, 0, 0x60, 0x00000000, 0x00007E73}, // Index 8, data type 1, identifier 1, write and erase, 0 bytes in length.
+        {1, 0x80,     1, 0, 0, 0x80, 0x000000DA, 0x00007E63}, // Index 1, data type 128, identifier 1, read and write, 218 bytes in length.
+        {2, 0x80,     2, 0, 0, 0xC0, 0x0000014E, 0x00007E65}, // Index 2, data type 128, identifier 2, read and write, 334 bytes in length.
+        {3, 0x80,     3, 0, 0, 0xC0, 0x0000037B, 0x00007E67}, // Index 3, data type 128, identifier 3, read and write, 891 bytes in length.
+        {4, 0x80,     3, 0, 0, 0xC0, 0x0000037B, 0x00007E6A}, // Index 4, data type 128, identifier 3, read and write, 891 bytes in length.
+        {5, 0x80,     3, 0, 0, 0xF0, 0x0001D4C0, 0x00007E6C}, // Index 5, data type 128, identifier 3, read, write, erase, archive, 120000 bytes in length.
+        {6, 0x80,  0x0A, 0, 0, 0x80, 0x00000000, 0x00007E6F}  // Index 6, data type 128, identifier 10, read-only, 0 bytes in length.
+    }
+};
+
+
+/**@brief Function for getting an array index of a particular directory structure matching the
+ *        requested file index.
+ *
+ * @param[in] index The file index identifier used for lookup.
+ *
+ * @return Upon success the array index, otherwise MEM_DIR_INVALID_INDEX.
+ */
+static uint32_t index_lookup(uint32_t index)
+{
+    if (index)
+    {
+        uint32_t idx;
+        for (idx = 0; idx < MEM_DIR_SIZE; idx++)
+        {
+            if (m_directory.directory_file[idx].data_file_index == index)
+            {
+                return idx;
+            }
+        }
+
+    }
+
+    return MEM_DIR_INVALID_INDEX;
+}
+
+
+bool mem_file_write(uint16_t index, uint32_t offset, const void * p_data, uint32_t size)
+{
+    if ((index < MEM_DIR_SIZE + 1u) && (index > 0))
+    {
+        const uint32_t array_index = index_lookup(index);
+        if (array_index != MEM_DIR_INVALID_INDEX)
+        {
+            NRF_LOG_HEXDUMP_INFO(p_data, size);
+            return true;
+        }
+        else
+        {
+            return false;
+        }
+
+    }
+
+    return false;
+}
+
+
+void mem_file_read(uint16_t index, uint32_t offset, void * p_data, uint32_t size)
+{
+    if (index == 0)
+    {
+        // Directory.
+
+        uint8_t * p_directory = (uint8_t*) &m_directory;
+        memcpy((uint8_t*)p_data, p_directory + offset, size);
+    }
+    else
+    {
+        // Fake data (no actual files stored in memory for this reference design).
+
+        uint32_t idx;
+        uint8_t* p_data_access = (uint8_t*)p_data;
+        for (idx = 0; idx < size; idx++)
+        {
+            p_data_access[idx] = ((uint8_t)(offset + idx));
+        }
+    }
+}
+
+
+bool mem_file_erase(uint16_t index)
+{
+    if ((index < MEM_DIR_SIZE + 1u) && (index > 0))
+    {
+        const uint32_t array_index = index_lookup(index);
+        if (array_index != MEM_DIR_INVALID_INDEX)
+        {
+            // Erase file. This function is implementation specific. There are no actual files in
+            // memory for this reference design, so there is nothing to erase.
+            return true;
+        }
+        else
+        {
+            return false;
+        }
+    }
+
+    return false;
+}
+
+
+bool mem_file_info_get(uint16_t index, antfs_dir_struct_t * p_file_info)
+{
+    if (index < (MEM_DIR_SIZE + 1u))
+    {
+        if (index == 0)
+        {
+            // Requested directory.
+
+            // Set can download flag.
+            p_file_info->general_flags = 0x80u;
+
+            p_file_info->file_size_in_bytes =
+                // Header + directory structures.
+                (uint32_t)(MEM_DIR_SIZE + 1u) * sizeof(antfs_dir_struct_t);
+
+            // Directory is index 0
+            p_file_info->data_file_index = 0;
+        }
+        else
+        {
+            // Requested a file.
+
+            const uint32_t array_index = index_lookup(index);
+            memcpy(p_file_info,
+                   &m_directory.directory_file[array_index],
+                   sizeof(antfs_dir_struct_t));
+        }
+
+        return true;
+    }
+
+    return false;
+}
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/mem.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/mem.h
new file mode 100644
index 0000000..b7d2b88
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/mem.h
@@ -0,0 +1,122 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2012
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @brief The memory simulator interface.
+ * This file is based on implementation originally made by Dynastream Innovations Inc. - August 2012
+ * @defgroup ant_fs_client_main ANT-FS client device simulator
+ * @{
+ * @ingroup nrf_ant_fs_client
+ *
+ * @brief The ANT-FS client device simulator.
+ *
+ */
+
+#ifndef MEM_H__
+#define MEM_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "antfs.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@brief Function for writing data to file system.
+ *
+ * @param[in] index        The file index.
+ * @param[in] offset       The write data offset.
+ * @param[in] p_data       The data to be written.
+ * @param[in] size         The number of bytes to be written.
+ *
+ * @retval true Operation success.
+ * @retval true Operation failure.
+ */
+bool mem_file_write(uint16_t index, uint32_t offset, const void * p_data, uint32_t size);
+
+/**@brief Function for reading data from file system.
+ *
+ * @param[in] index        The file index, 0 for directory.
+ * @param[in] offset       The read data offset.
+ * @param[out] p_data      The buffer where data is read.
+ * @param[in] size         The number of bytes to read.
+ */
+void mem_file_read(uint16_t index, uint32_t offset, void * p_data, uint32_t size);
+
+/**@brief Function for erasing file from file system.
+ *
+ * @param[in] index        The file index.
+ *
+ * @retval true Operation success.
+ * @retval true Operation failure.
+ */
+bool mem_file_erase(uint16_t index);
+
+/**@brief Function for retrieving file information from directory.
+ *
+ * @param[in] index        The file index, which information to retrieve.
+ * @param[out] p_file_info The container where information is read.
+ *
+ * @retval true Operation success.
+ * @retval true Operation failure.
+ */
+bool mem_file_info_get(uint16_t index, antfs_dir_struct_t * p_file_info);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  // MEM_H__
+
+/**
+ *@}
+ **/
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/arm4/ant_fs_client_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/arm4/ant_fs_client_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/arm4/ant_fs_client_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/arm4/ant_fs_client_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/arm4/ant_fs_client_pca10040_s212.uvproj
new file mode 100644
index 0000000..694c01b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/arm4/ant_fs_client_pca10040_s212.uvproj
@@ -0,0 +1,557 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_fs;..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_fs;..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>mem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\mem.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>antfs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_fs\antfs.c</FilePath>            </File>            <File>
+              <FileName>crc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_fs\crc.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/arm5_no_packs/ant_fs_client_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/arm5_no_packs/ant_fs_client_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/arm5_no_packs/ant_fs_client_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/arm5_no_packs/ant_fs_client_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/arm5_no_packs/ant_fs_client_pca10040_s212.uvprojx
new file mode 100644
index 0000000..91ffe86
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/arm5_no_packs/ant_fs_client_pca10040_s212.uvprojx
@@ -0,0 +1,581 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_fs;..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_fs;..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>mem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\mem.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>antfs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_fs\antfs.c</FilePath>            </File>            <File>
+              <FileName>crc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_fs\crc.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..90c5bfc
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,194 @@
+PROJECT_NAME     := ant_fs_client_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_fs_client_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \
+  $(SDK_ROOT)/components/ant/ant_fs/antfs.c \
+  $(SDK_ROOT)/components/ant/ant_fs/crc.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(PROJ_DIR)/mem.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(PROJ_DIR) \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/ant/ant_key_manager \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_fs \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/ant/ant_key_manager/config \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/armgcc/ant_fs_client_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/armgcc/ant_fs_client_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/armgcc/ant_fs_client_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..991f287
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,4004 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> CLIENT_DEV_TYPE - Beacon device type. 
+#ifndef CLIENT_DEV_TYPE
+#define CLIENT_DEV_TYPE 416
+#endif
+
+// <o> CLIENT_MANUF_ID - Beacon manufacturer ID. 
+#ifndef CLIENT_MANUF_ID
+#define CLIENT_MANUF_ID 2
+#endif
+
+// <o> CLIENT_SERIAL_NUMBER - Serial number of client device. 
+#ifndef CLIENT_SERIAL_NUMBER
+#define CLIENT_SERIAL_NUMBER 12345
+#endif
+
+// <e> MEM_WRITE_LOG_ENABLED - Enable memory write log.
+//==========================================================
+#ifndef MEM_WRITE_LOG_ENABLED
+#define MEM_WRITE_LOG_ENABLED 0
+#endif
+// <o> MEM_WRITE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef MEM_WRITE_LOG_LEVEL
+#define MEM_WRITE_LOG_LEVEL 3
+#endif
+
+// <o> MEM_WRITE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef MEM_WRITE_INFO_COLOR
+#define MEM_WRITE_INFO_COLOR 0
+#endif
+
+// <o> MEM_WRITE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef MEM_WRITE_DEBUG_COLOR
+#define MEM_WRITE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <e> ANTFS_ENABLED - ant_fs - ANT File Share module.
+//==========================================================
+#ifndef ANTFS_ENABLED
+#define ANTFS_ENABLED 1
+#endif
+// <o> ANTFS_CONFIG_NETWORK_NUMBER - ANT-FS network number. 
+#ifndef ANTFS_CONFIG_NETWORK_NUMBER
+#define ANTFS_CONFIG_NETWORK_NUMBER 0
+#endif
+
+// <o> ANTFS_CONFIG_CHANNEL_NUMBER - ANT-FS channel number. 
+#ifndef ANTFS_CONFIG_CHANNEL_NUMBER
+#define ANTFS_CONFIG_CHANNEL_NUMBER 0
+#endif
+
+// <o> ANTFS_CONFIG_PAIRING_TIMEOUT - Pairing timeout - how long the UI will wait for a response to a pairing request before switching to the link layer, in seconds. 
+#ifndef ANTFS_CONFIG_PAIRING_TIMEOUT
+#define ANTFS_CONFIG_PAIRING_TIMEOUT 120
+#endif
+
+// <o> ANTFS_CONFIG_LINK_COMMAND_TIMEOUT - Command timeout - how long the client will wait without receiving any commands before switching to the link layer, in seconds. 
+#ifndef ANTFS_CONFIG_LINK_COMMAND_TIMEOUT
+#define ANTFS_CONFIG_LINK_COMMAND_TIMEOUT 10
+#endif
+
+// <o> ANTFS_CONFIG_TRANS_TYPE - ANT-FS Transmission Type. 
+#ifndef ANTFS_CONFIG_TRANS_TYPE
+#define ANTFS_CONFIG_TRANS_TYPE 10
+#endif
+
+// <o> ANTFS_CONFIG_DEVICE_TYPE - ANT device type for channel configuration. 
+#ifndef ANTFS_CONFIG_DEVICE_TYPE
+#define ANTFS_CONFIG_DEVICE_TYPE 1
+#endif
+
+// <o> ANTFS_CONFIG_BEACON_STATUS_PERIOD  - ANT-FS Beacon Message Period.
+ 
+// <0=> 0.5 Hz 
+// <1=> 1 Hz 
+// <2=> 2 Hz 
+// <3=> 4 Hz 
+// <4=> 8 Hz 
+
+#ifndef ANTFS_CONFIG_BEACON_STATUS_PERIOD
+#define ANTFS_CONFIG_BEACON_STATUS_PERIOD 3
+#endif
+
+// <o> ANTFS_CONFIG_TRANSMIT_POWER  - ANT Transmit Power.
+ 
+// <0=> Lowest ANT Tx power level setting. (-20dBm) 
+// <1=> ANT Tx power > Lvl 0. (-12dBm) 
+// <2=> ANT Tx power > Lvl 1. (-4dBm) 
+// <3=> ANT Tx power > Lvl 2. Default tx power level. (0dBm) 
+// <4=> ANT Tx power > Lvl 3. (+4dBm) 
+// <128=> Custom tx power selection 
+
+#ifndef ANTFS_CONFIG_TRANSMIT_POWER
+#define ANTFS_CONFIG_TRANSMIT_POWER 3
+#endif
+
+// <o> ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER - ANT Custom Transmit Power. 
+#ifndef ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER
+#define ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER 0
+#endif
+
+// <q> ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED  - Use pairing and key exchange authentication.
+ 
+
+#ifndef ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED
+#define ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED 1
+#endif
+
+// <q> ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED  - Use passkey authentication.
+ 
+
+#ifndef ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED
+#define ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED 1
+#endif
+
+// <q> ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED  - Allow host to bypass authentication.
+ 
+
+#ifndef ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED
+#define ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED 1
+#endif
+
+// <q> ANTFS_CONFIG_UPLOAD_ENABLED  - Support upload operation.
+ 
+
+#ifndef ANTFS_CONFIG_UPLOAD_ENABLED
+#define ANTFS_CONFIG_UPLOAD_ENABLED 1
+#endif
+
+// <q> ANTFS_CONFIG_DEBUG_LED_ENABLED  - Enables LED debug in the module.
+ 
+
+#ifndef ANTFS_CONFIG_DEBUG_LED_ENABLED
+#define ANTFS_CONFIG_DEBUG_LED_ENABLED 1
+#endif
+
+// </e>
+
+// <q> ANT_KEY_MANAGER_ENABLED  - ant_key_manager - Software Component
+ 
+
+#ifndef ANT_KEY_MANAGER_ENABLED
+#define ANT_KEY_MANAGER_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/iar/ant_fs_client_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/iar/ant_fs_client_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/iar/ant_fs_client_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/iar/ant_fs_client_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/iar/ant_fs_client_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/iar/ant_fs_client_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/iar/ant_fs_client_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/iar/ant_fs_client_pca10040_s212.ewp
new file mode 100644
index 0000000..e3e8f88
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/iar/ant_fs_client_pca10040_s212.ewp
@@ -0,0 +1,1089 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_fs</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_fs</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_fs_client_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_fs_client_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_fs_client_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_fs\antfs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_fs\crc.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\mem.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/ses/ant_fs_client_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/ses/ant_fs_client_pca10040_s212.emProject
new file mode 100644
index 0000000..73ae167
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/ses/ant_fs_client_pca10040_s212.emProject
@@ -0,0 +1,108 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_fs_client_pca10040_s212" target="8" version="2">
+  <project Name="ant_fs_client_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_fs;../../../../../../../components/ant/ant_key_manager;../../../../../../../components/ant/ant_key_manager/config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../..;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" />
+      <file file_name="../../../../../../../components/ant/ant_fs/antfs.c" />
+      <file file_name="../../../../../../../components/ant/ant_fs/crc.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../../../mem.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/ses/ant_fs_client_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/ses/ant_fs_client_pca10040_s212.emSession
new file mode 100644
index 0000000..3a99b19
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/ses/ant_fs_client_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_fs_client_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_fs/client/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/ant_hd_search_and_bs.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/ant_hd_search_and_bs.eww
new file mode 100644
index 0000000..86188ed
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/ant_hd_search_and_bs.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_hd_search_and_bs_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_hd_search_and_bs_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/ant_hd_search_and_bs_test.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/ant_hd_search_and_bs_test.xml
new file mode 100644
index 0000000..c2a9504
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/ant_hd_search_and_bs_test.xml
@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:2016-07-22 13:00:24-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup />
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">0</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">5</transmissionType>
+      <msgPeriod type="System.UInt16">2048</msgPeriod>
+      <radioFreq type="System.Byte">77</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">1</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">5</transmissionType>
+      <msgPeriod type="System.UInt16">2048</msgPeriod>
+      <radioFreq type="System.Byte">77</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">35</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">36</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">37</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">38</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">39</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">40</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/arm4/ant_hd_search_and_bs_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/arm4/ant_hd_search_and_bs_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/arm4/ant_hd_search_and_bs_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/arm4/ant_hd_search_and_bs_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/arm4/ant_hd_search_and_bs_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..a0ec3dc
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/arm4/ant_hd_search_and_bs_d52_starterkit_s212.uvproj
@@ -0,0 +1,554 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/arm5_no_packs/ant_hd_search_and_bs_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/arm5_no_packs/ant_hd_search_and_bs_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/arm5_no_packs/ant_hd_search_and_bs_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/arm5_no_packs/ant_hd_search_and_bs_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/arm5_no_packs/ant_hd_search_and_bs_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..9ad31d6
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/arm5_no_packs/ant_hd_search_and_bs_d52_starterkit_s212.uvprojx
@@ -0,0 +1,578 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..9f12a5f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,187 @@
+PROJECT_NAME     := ant_hd_search_and_bs_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_hd_search_and_bs_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/armgcc/ant_hd_search_and_bs_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/armgcc/ant_hd_search_and_bs_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/armgcc/ant_hd_search_and_bs_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..d837af6
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3948 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_BS_CHANNEL_NUMBER - BS ANT channel number. 
+#ifndef ANT_BS_CHANNEL_NUMBER
+#define ANT_BS_CHANNEL_NUMBER 0
+#endif
+
+// <o> ANT_MS_CHANNEL_NUMBER - MS ANT channel number. 
+#ifndef ANT_MS_CHANNEL_NUMBER
+#define ANT_MS_CHANNEL_NUMBER 1
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 1
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 5
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 2048
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 77
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 2
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/iar/ant_hd_search_and_bs_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/iar/ant_hd_search_and_bs_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/iar/ant_hd_search_and_bs_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/iar/ant_hd_search_and_bs_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/iar/ant_hd_search_and_bs_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..4f75d29
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/iar/ant_hd_search_and_bs_d52_starterkit_s212.ewp
@@ -0,0 +1,1080 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_hd_search_and_bs_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_hd_search_and_bs_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_hd_search_and_bs_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/iar/ant_hd_search_and_bs_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/iar/ant_hd_search_and_bs_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/iar/ant_hd_search_and_bs_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/ses/ant_hd_search_and_bs_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/ses/ant_hd_search_and_bs_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..53259f9
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/ses/ant_hd_search_and_bs_d52_starterkit_s212.emProject
@@ -0,0 +1,107 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_hd_search_and_bs_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_hd_search_and_bs_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/ant/ant_search_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/ses/ant_hd_search_and_bs_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/ses/ant_hd_search_and_bs_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..7247a5c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/ses/ant_hd_search_and_bs_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_hd_search_and_bs_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/main.c
new file mode 100644
index 0000000..7ca8118
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/main.c
@@ -0,0 +1,328 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2013
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @defgroup nrf_ant_background_scanning_demo ANT Background Scanning Example
+ * @{
+ * @ingroup nrf_ant_background_scanning_demo
+ *
+ * @brief Example of ANT Background Scanning implementation.
+ *
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "nrf.h"
+#include "bsp.h"
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "app_error.h"
+#include "nrf_pwr_mgmt.h"
+#include "ant_channel_config.h"
+#include "ant_search_config.h"
+#include "app_timer.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "sdk_config.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+#define ANT_BEACON_PAGE             ((uint8_t) 1)
+#define APP_MS_ANT_OBSERVER_PRIO    1
+#define APP_BS_ANT_OBSERVER_PRIO    1
+
+static uint8_t  m_last_rssi      = 0;
+static uint16_t m_last_device_id = 0;
+static uint8_t  m_received       = 0;
+
+/**@brief Function for setting payload for ANT message and sending it via
+ *        ANT master beacon channel.
+ *
+ *
+ * @details   ANT_BEACON_PAGE message is queued. The format is:
+ *            byte[0]   = page (1 = ANT_BEACON_PAGE)
+ *            byte[1]   = last RSSI value received
+ *            byte[2-3] = channel ID of device corresponding to last RSSI value (little endian)
+ *            byte[6]   = counter that increases with every message period
+ *            byte[7]   = number of messages received on background scanning channel
+ */
+void ant_message_send()
+{
+    uint32_t       err_code;
+    uint8_t        tx_buffer[ANT_STANDARD_DATA_PAYLOAD_SIZE];
+    static uint8_t counter = 0;
+
+    tx_buffer[0] = ANT_BEACON_PAGE;
+    tx_buffer[1] = m_last_rssi;
+    tx_buffer[2] = (uint8_t) LSB_16(m_last_device_id); // LSB
+    tx_buffer[3] = (uint8_t) MSB_16(m_last_device_id); // MSB
+    tx_buffer[6] = counter++;
+    tx_buffer[7] = m_received;
+
+    err_code = sd_ant_broadcast_message_tx(ANT_MS_CHANNEL_NUMBER,
+                                           ANT_STANDARD_DATA_PAYLOAD_SIZE,
+                                           tx_buffer);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Initialize application.
+ */
+static void application_initialize()
+{
+    /* Set library config to report RSSI and Device ID */
+    uint32_t err_code = sd_ant_lib_config_set(ANT_LIB_CONFIG_MESG_OUT_INC_RSSI
+                                              | ANT_LIB_CONFIG_MESG_OUT_INC_DEVICE_ID);
+
+    APP_ERROR_CHECK(err_code);
+
+    const uint16_t dev_num = (uint16_t) (NRF_FICR->DEVICEID[0]);
+
+    const ant_channel_config_t ms_channel_config =
+    {
+        .channel_number    = ANT_MS_CHANNEL_NUMBER,
+        .channel_type      = CHANNEL_TYPE_MASTER,
+        .ext_assign        = 0x00,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .device_number     = dev_num,
+        .channel_period    = CHAN_PERIOD,
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    const ant_channel_config_t bs_channel_config =
+    {
+        .channel_number    = ANT_BS_CHANNEL_NUMBER,
+        .channel_type      = CHANNEL_TYPE_SLAVE,
+        .ext_assign        = EXT_PARAM_ALWAYS_SEARCH,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .device_number     = 0x00,              // Wild card
+        .channel_period    = 0x00,              // This is not taken into account.
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    const ant_search_config_t bs_search_config =
+    {
+        .channel_number        = ANT_BS_CHANNEL_NUMBER,
+        .low_priority_timeout  = ANT_LOW_PRIORITY_TIMEOUT_DISABLE,
+        .high_priority_timeout = ANT_HIGH_PRIORITY_SEARCH_DISABLE,
+        .search_sharing_cycles = ANT_SEARCH_SHARING_CYCLES_DISABLE,
+        .search_priority       = ANT_SEARCH_PRIORITY_DEFAULT,
+        // The ANT Search Waveform must be set to the default while using high duty search
+        .waveform = ANT_WAVEFORM_DEFAULT,
+    };
+
+    // Configure high duty search
+    // Can only be done with all channels closed
+    const ANT_HIGH_DUTY_SEARCH_CONFIG hconfig =
+    {
+        HIGH_DUTY_SEARCH_ENABLE,
+        HIGH_DUTY_SEARCH_SUPPRESSION_DEFAULT,
+        HIGH_DUTY_SEARCH_RESTART_INTERVAL_DEFAULT
+    };
+
+    err_code = sd_ant_high_duty_search_config_set(&hconfig);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_channel_init(&ms_channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_channel_init(&bs_channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_search_init(&bs_search_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Fill tx buffer for the first frame
+    ant_message_send();
+
+    err_code = sd_ant_channel_open(ANT_MS_CHANNEL_NUMBER);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = sd_ant_channel_open(ANT_BS_CHANNEL_NUMBER);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for the Tracer initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS,
+                        NULL);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for ANT stack initialization.
+ *
+ * @details Initializes the SoftDevice and the ANT event interrupt.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Process ANT message on ANT background scanning channel.
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+void background_scanner_process(ant_evt_t * p_ant_evt, void * p_context)
+{
+    uint32_t err_code;
+
+    switch (p_ant_evt->event)
+    {
+        case EVENT_RX:
+            err_code = bsp_indication_set(BSP_INDICATE_RCV_OK);
+            APP_ERROR_CHECK(err_code);
+
+            if (p_ant_evt->message.ANT_MESSAGE_stExtMesgBF.bANTDeviceID)
+            {
+                m_last_device_id = uint16_decode(p_ant_evt->message.ANT_MESSAGE_aucExtData);
+            }
+
+            if (p_ant_evt->message.ANT_MESSAGE_stExtMesgBF.bANTRssi)
+            {
+                m_last_rssi = p_ant_evt->message.ANT_MESSAGE_aucExtData[5];
+            }
+
+            NRF_LOG_INFO("Message number %d\n\r", m_received);
+            NRF_LOG_INFO("Device ID:     %d\n\r", m_last_device_id);
+            NRF_LOG_INFO("RSSI:          %d\n\r\n\r", m_last_rssi);
+
+            m_received++;
+            break;
+
+        default:
+            break;
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_bs_ant_observer, APP_BS_ANT_OBSERVER_PRIO, background_scanner_process, NULL);
+
+/**@brief Process ANT message on ANT master beacon channel.
+ *
+ *
+ * @details   This function handles all events on the master beacon channel.
+ *            On EVENT_TX an ANT_BEACON_PAGE message is queued.
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+void master_beacon_process(ant_evt_t * p_ant_evt, void * p_context)
+{
+    switch (p_ant_evt->event)
+    {
+        case EVENT_TX:
+            ant_message_send();
+            break;
+
+        default:
+            break;
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ms_ant_observer, APP_MS_ANT_OBSERVER_PRIO, master_beacon_process, NULL);
+
+
+/* Main function */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    application_initialize();
+
+    NRF_LOG_INFO("ANT High Duty Search and Background Scanning example started.");
+
+    // Enter main loop
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
+
+
+/**
+ *@}
+ **/
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/arm4/ant_hd_search_and_bs_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/arm4/ant_hd_search_and_bs_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/arm4/ant_hd_search_and_bs_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/arm4/ant_hd_search_and_bs_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/arm4/ant_hd_search_and_bs_pca10040_s212.uvproj
new file mode 100644
index 0000000..0644662
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/arm4/ant_hd_search_and_bs_pca10040_s212.uvproj
@@ -0,0 +1,551 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/arm5_no_packs/ant_hd_search_and_bs_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/arm5_no_packs/ant_hd_search_and_bs_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/arm5_no_packs/ant_hd_search_and_bs_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/arm5_no_packs/ant_hd_search_and_bs_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/arm5_no_packs/ant_hd_search_and_bs_pca10040_s212.uvprojx
new file mode 100644
index 0000000..10b43d1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/arm5_no_packs/ant_hd_search_and_bs_pca10040_s212.uvprojx
@@ -0,0 +1,575 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..a9199a7
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,190 @@
+PROJECT_NAME     := ant_hd_search_and_bs_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_hd_search_and_bs_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/armgcc/ant_hd_search_and_bs_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/armgcc/ant_hd_search_and_bs_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/armgcc/ant_hd_search_and_bs_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..fdd6e81
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3892 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_BS_CHANNEL_NUMBER - BS ANT channel number. 
+#ifndef ANT_BS_CHANNEL_NUMBER
+#define ANT_BS_CHANNEL_NUMBER 0
+#endif
+
+// <o> ANT_MS_CHANNEL_NUMBER - MS ANT channel number. 
+#ifndef ANT_MS_CHANNEL_NUMBER
+#define ANT_MS_CHANNEL_NUMBER 1
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 1
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 5
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 2048
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 77
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 2
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/iar/ant_hd_search_and_bs_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/iar/ant_hd_search_and_bs_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/iar/ant_hd_search_and_bs_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/iar/ant_hd_search_and_bs_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/iar/ant_hd_search_and_bs_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/iar/ant_hd_search_and_bs_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/iar/ant_hd_search_and_bs_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/iar/ant_hd_search_and_bs_pca10040_s212.ewp
new file mode 100644
index 0000000..c07525a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/iar/ant_hd_search_and_bs_pca10040_s212.ewp
@@ -0,0 +1,1083 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_hd_search_and_bs_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_hd_search_and_bs_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_hd_search_and_bs_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/ses/ant_hd_search_and_bs_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/ses/ant_hd_search_and_bs_pca10040_s212.emProject
new file mode 100644
index 0000000..3ef717c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/ses/ant_hd_search_and_bs_pca10040_s212.emProject
@@ -0,0 +1,106 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_hd_search_and_bs_pca10040_s212" target="8" version="2">
+  <project Name="ant_hd_search_and_bs_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/ant/ant_search_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/ses/ant_hd_search_and_bs_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/ses/ant_hd_search_and_bs_pca10040_s212.emSession
new file mode 100644
index 0000000..c90b444
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/ses/ant_hd_search_and_bs_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_hd_search_and_bs_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_hd_search_and_bs/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/ant_io_rx.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/ant_io_rx.c
new file mode 100644
index 0000000..eae13e1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/ant_io_rx.c
@@ -0,0 +1,231 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#include "ant_io_rx.h"
+#include <stdint.h>
+#include "string.h"
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "app_error.h"
+#include "ant_error.h"
+#include "boards.h"
+#include "sdk_config.h"
+#include "ant_channel_config.h"
+#include "ant_search_config.h"
+#include "nrf_soc.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+
+// Data Page Numbers
+#define DIGITALIO_DATA_PID              1u                        /**< Page number: digital data. */
+
+#define APP_ANT_OBSERVER_PRIO           1                         /**< Application's ANT observer priority. You shouldn't need to modify this value. */
+
+// Static variables and buffers.
+static uint8_t m_broadcast_data[ANT_STANDARD_DATA_PAYLOAD_SIZE];  /**< Primary data transmit buffer. */
+static uint8_t m_rx_input_pin_state = 0xFF;                       /**< State of received digital data, from the other node. */
+static uint8_t m_tx_input_pin_state = 0xFF;                       /**< State of digital inputs in this node, for transmission. */
+
+
+/**@brief Encode current state of buttons
+ *
+ * Configure bitfield encoding the state of the buttons
+ * Bit 0 = 0 if button 0 is pressed
+ * Bit 1 = 0 if button 1 is pressed
+ * Bit 2 = 0 if button 2 is pressed
+ * Bit 3 = 0 if button 3 is pressed
+ * Bit 4-7 = 1 (unused)
+ */
+static void button_state_encode(void)
+{
+    m_tx_input_pin_state = 0xFF;
+
+    if (bsp_button_is_pressed(0))
+    {
+        m_tx_input_pin_state &= 0xFE;
+    }
+
+    if (bsp_button_is_pressed(1))
+    {
+        m_tx_input_pin_state &= 0xFD;
+    }
+
+    if (bsp_button_is_pressed(2))
+    {
+        m_tx_input_pin_state &= 0xFB;
+    }
+
+    if (bsp_button_is_pressed(3))
+    {
+        m_tx_input_pin_state &= 0xF7;
+    }
+}
+
+
+/**@brief Formats page with current button state and sends data
+ * Byte 0   = Page number (Digital I/O Data)
+ * Byte 1-6 = Reserved
+ * Byte 7   = State of digital inputs
+ */
+static void handle_transmit()
+{
+    uint32_t err_code;
+
+    button_state_encode();
+
+    m_broadcast_data[0] = DIGITALIO_DATA_PID;
+    m_broadcast_data[1] = 0xFF;
+    m_broadcast_data[2] = 0xFF;
+    m_broadcast_data[3] = 0xFF;
+    m_broadcast_data[4] = 0xFF;
+    m_broadcast_data[5] = 0xFF;
+    m_broadcast_data[6] = 0xFF;
+    m_broadcast_data[7] = m_tx_input_pin_state;
+
+    err_code = sd_ant_broadcast_message_tx(ANT_CHANNEL_NUM,
+                                           ANT_STANDARD_DATA_PAYLOAD_SIZE,
+                                           m_broadcast_data);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**@brief Turns on LEDs according to the contents of the received data page.
+ */
+static void led_state_set()
+{
+    uint8_t led_state_field = ~m_rx_input_pin_state;
+
+    if (led_state_field & 1)
+        bsp_board_led_on(BSP_BOARD_LED_0);
+    else
+        bsp_board_led_off(BSP_BOARD_LED_0);
+
+    if (led_state_field & 2)
+        bsp_board_led_on(BSP_BOARD_LED_1);
+    else
+        bsp_board_led_off(BSP_BOARD_LED_1);
+
+    if (led_state_field & 4)
+        bsp_board_led_on(BSP_BOARD_LED_2);
+    else
+        bsp_board_led_off(BSP_BOARD_LED_2);
+
+    if (led_state_field & 8)
+        bsp_board_led_on(BSP_BOARD_LED_3);
+    else
+        bsp_board_led_off(BSP_BOARD_LED_3);
+}
+
+
+void ant_io_rx_setup(void)
+{
+    uint32_t err_code;
+
+    ant_channel_config_t channel_config =
+    {
+        .channel_number    = ANT_CHANNEL_NUM,
+        .channel_type      = CHANNEL_TYPE_SLAVE,
+        .ext_assign        = 0x00,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .device_number     = CHAN_ID_DEV_NUM,
+        .channel_period    = CHAN_PERIOD,
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    ant_search_config_t search_config  = DEFAULT_ANT_SEARCH_CONFIG(ANT_CHANNEL_NUM);
+    search_config.low_priority_timeout = ANT_LOW_PRIORITY_TIMEOUT_DISABLE;
+
+    // Configure channel parameters
+    err_code = ant_channel_init(&channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Configure search
+    err_code = ant_search_init(&search_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Open channel.
+    err_code = sd_ant_channel_open(ANT_CHANNEL_NUM);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for handling a ANT stack event.
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+static void ant_evt_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    switch (p_ant_evt->event)
+    {
+        case EVENT_RX:
+            if (p_ant_evt->message.ANT_MESSAGE_aucPayload[0] == DIGITALIO_DATA_PID)
+            {
+                // Set LEDs according to Received Digital IO Data Page
+                m_rx_input_pin_state = p_ant_evt->message.ANT_MESSAGE_aucPayload[7];
+                led_state_set();
+            }
+
+            // Transmit the current state of the digital pins on the reverse direction
+            handle_transmit();
+            break;
+
+        case EVENT_TX:
+            // Transmit data on the reverse direction every channel period
+            handle_transmit();
+            break;
+
+        default:
+            break;
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, APP_ANT_OBSERVER_PRIO, ant_evt_handler, NULL);
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/ant_io_rx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/ant_io_rx.eww
new file mode 100644
index 0000000..98ae1d2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/ant_io_rx.eww
@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_io_rx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_io_rx_d52_starterkit_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\pca10040\ser_s212_uart\iar\ant_io_rx_pca10040_s212_uart.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\ser_s212_uart\iar\ant_io_rx_d52_starterkit_s212_uart.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/ant_io_rx.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/ant_io_rx.h
new file mode 100644
index 0000000..1f3e166
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/ant_io_rx.h
@@ -0,0 +1,70 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#ifndef ANT_IO_RX_H__
+#define ANT_IO_RX_H__
+
+#include <stdint.h>
+#include "bsp.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@brief Function for configuring and opening slave channel.
+ *
+ */
+void ant_io_rx_setup(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  // ANT_IO_RX_H__
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/arm4/ant_io_rx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/arm4/ant_io_rx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/arm4/ant_io_rx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/arm4/ant_io_rx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/arm4/ant_io_rx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..09422f2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/arm4/ant_io_rx_d52_starterkit_s212.uvproj
@@ -0,0 +1,557 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_io_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_io_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/arm5_no_packs/ant_io_rx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/arm5_no_packs/ant_io_rx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/arm5_no_packs/ant_io_rx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/arm5_no_packs/ant_io_rx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/arm5_no_packs/ant_io_rx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..fd6d40e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/arm5_no_packs/ant_io_rx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,581 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_io_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_io_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..cf97c4e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,190 @@
+PROJECT_NAME     := ant_io_rx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_io_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_io_rx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/armgcc/ant_io_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/armgcc/ant_io_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/armgcc/ant_io_rx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..19a7755
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3948 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/iar/ant_io_rx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/iar/ant_io_rx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/iar/ant_io_rx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/iar/ant_io_rx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/iar/ant_io_rx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..a446ddf
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/iar/ant_io_rx_d52_starterkit_s212.ewp
@@ -0,0 +1,1083 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_io_rx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_io_rx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_io_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_io_rx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/iar/ant_io_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/iar/ant_io_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/iar/ant_io_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/ses/ant_io_rx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/ses/ant_io_rx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..d6e7eff
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/ses/ant_io_rx_d52_starterkit_s212.emProject
@@ -0,0 +1,108 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_io_rx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_io_rx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/ant/ant_search_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_io_rx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/ses/ant_io_rx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/ses/ant_io_rx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..30ea224
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/ses/ant_io_rx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_io_rx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/arm4/ant_io_rx_d52_starterkit_s212_uart.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/arm4/ant_io_rx_d52_starterkit_s212_uart.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/arm4/ant_io_rx_d52_starterkit_s212_uart.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/arm4/ant_io_rx_d52_starterkit_s212_uart.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/arm4/ant_io_rx_d52_starterkit_s212_uart.uvproj
new file mode 100644
index 0000000..df6995c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/arm4/ant_io_rx_d52_starterkit_s212_uart.uvproj
@@ -0,0 +1,737 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SVCALL_AS_NORMAL_FUNCTION SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\queue;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers;..\..\..\..\..\..\..\components\serialization\application\hal;..\..\..\..\..\..\..\components\serialization\application\transport;..\..\..\..\..\..\..\components\serialization\common;..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant;..\..\..\..\..\..\..\components\serialization\common\transport;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSVCALL_AS_NORMAL_FUNCTION,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SVCALL_AS_NORMAL_FUNCTION SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\queue;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers;..\..\..\..\..\..\..\components\serialization\application\hal;..\..\..\..\..\..\..\components\serialization\application\transport;..\..\..\..\..\..\..\components\serialization\common;..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant;..\..\..\..\..\..\..\components\serialization\common\transport;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_io_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_io_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath>            </File>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_nvmc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\hal\nrf_nvmc.c</FilePath>            </File>            <File>
+              <FileName>nrf_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</FilePath>            </File>            <File>
+              <FileName>nrfx_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_power_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\uart\app_uart.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_queue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\queue\nrf_queue.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Serialization</GroupName>
+          <Files>            <File>
+              <FileName>ant_acknowledge_message_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_acknowledge_message_tx.c</FilePath>            </File>            <File>
+              <FileName>ant_active_search_sharing_cycles_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_get.c</FilePath>            </File>            <File>
+              <FileName>ant_active_search_sharing_cycles_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_set.c</FilePath>            </File>            <File>
+              <FileName>ant_adv_burst_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_adv_burst_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_broadcast_message_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_broadcast_message_tx.c</FilePath>            </File>            <File>
+              <FileName>ant_capabilities_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_capabilities_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_assign.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_assign.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_close.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_close.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_id_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_id_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_low_priority_rx_search_timeout_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_low_priority_rx_search_timeout_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_open_with_offset.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_open_with_offset.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_period_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_period_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_freq_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_freq_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_tx_power_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_tx_power_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_rx_search_timeout_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_rx_search_timeout_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_status_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_status_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_unassign.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_unassign.c</FilePath>            </File>            <File>
+              <FileName>ant_coex_config_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_get.c</FilePath>            </File>            <File>
+              <FileName>ant_coex_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_channel_enable.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_channel_enable.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_info_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_get.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_info_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_set.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_key_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_key_set.c</FilePath>            </File>            <File>
+              <FileName>ant_cw_test_mode.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode.c</FilePath>            </File>            <File>
+              <FileName>ant_cw_test_mode_init.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode_init.c</FilePath>            </File>            <File>
+              <FileName>ant_enable.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_enable.c</FilePath>            </File>            <File>
+              <FileName>ant_event.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_event.c</FilePath>            </File>            <File>
+              <FileName>ant_id_list_add.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_add.c</FilePath>            </File>            <File>
+              <FileName>ant_id_list_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_config.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_clear.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_clear.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_get.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_network_address_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_network_address_set.c</FilePath>            </File>            <File>
+              <FileName>ant_prox_search_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_prox_search_set.c</FilePath>            </File>            <File>
+              <FileName>ant_rx_scan_mode_start.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_rx_scan_mode_start.c</FilePath>            </File>            <File>
+              <FileName>ant_search_channel_priority_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_channel_priority_set.c</FilePath>            </File>            <File>
+              <FileName>ant_search_waveform_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_waveform_set.c</FilePath>            </File>            <File>
+              <FileName>ant_stack_reset.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_stack_reset.c</FilePath>            </File>            <File>
+              <FileName>ant_struct_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant\ant_struct_serialization.c</FilePath>            </File>            <File>
+              <FileName>ant_version_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_version_get.c</FilePath>            </File>            <File>
+              <FileName>app_mw_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\middleware\app_mw_ant.c</FilePath>            </File>            <File>
+              <FileName>ble_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\ble_serialization.c</FilePath>            </File>            <File>
+              <FileName>cond_field_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\cond_field_serialization.c</FilePath>            </File>            <File>
+              <FileName>ser_app_hal_nrf5x.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_hal_nrf5x.c</FilePath>            </File>            <File>
+              <FileName>ser_app_power_system_off.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_power_system_off.c</FilePath>            </File>            <File>
+              <FileName>ser_dbg_sd_str.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\ser_dbg_sd_str.c</FilePath>            </File>            <File>
+              <FileName>ser_hal_transport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\transport\ser_hal_transport.c</FilePath>            </File>            <File>
+              <FileName>ser_phy_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\ser_phy_uart.c</FilePath>            </File>            <File>
+              <FileName>ser_sd_transport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\transport\ser_sd_transport.c</FilePath>            </File>            <File>
+              <FileName>ser_softdevice_handler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\transport\ser_softdevice_handler.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/arm5_no_packs/ant_io_rx_d52_starterkit_s212_uart.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/arm5_no_packs/ant_io_rx_d52_starterkit_s212_uart.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/arm5_no_packs/ant_io_rx_d52_starterkit_s212_uart.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/arm5_no_packs/ant_io_rx_d52_starterkit_s212_uart.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/arm5_no_packs/ant_io_rx_d52_starterkit_s212_uart.uvprojx
new file mode 100644
index 0000000..0f51e7b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/arm5_no_packs/ant_io_rx_d52_starterkit_s212_uart.uvprojx
@@ -0,0 +1,761 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SVCALL_AS_NORMAL_FUNCTION SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\queue;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers;..\..\..\..\..\..\..\components\serialization\application\hal;..\..\..\..\..\..\..\components\serialization\application\transport;..\..\..\..\..\..\..\components\serialization\common;..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant;..\..\..\..\..\..\..\components\serialization\common\transport;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSVCALL_AS_NORMAL_FUNCTION,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SVCALL_AS_NORMAL_FUNCTION SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\queue;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers;..\..\..\..\..\..\..\components\serialization\application\hal;..\..\..\..\..\..\..\components\serialization\application\transport;..\..\..\..\..\..\..\components\serialization\common;..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant;..\..\..\..\..\..\..\components\serialization\common\transport;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_io_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_io_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath>            </File>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_nvmc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\hal\nrf_nvmc.c</FilePath>            </File>            <File>
+              <FileName>nrf_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</FilePath>            </File>            <File>
+              <FileName>nrfx_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_power_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\uart\app_uart.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_queue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\queue\nrf_queue.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Serialization</GroupName>
+          <Files>            <File>
+              <FileName>ant_acknowledge_message_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_acknowledge_message_tx.c</FilePath>            </File>            <File>
+              <FileName>ant_active_search_sharing_cycles_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_get.c</FilePath>            </File>            <File>
+              <FileName>ant_active_search_sharing_cycles_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_set.c</FilePath>            </File>            <File>
+              <FileName>ant_adv_burst_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_adv_burst_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_broadcast_message_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_broadcast_message_tx.c</FilePath>            </File>            <File>
+              <FileName>ant_capabilities_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_capabilities_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_assign.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_assign.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_close.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_close.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_id_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_id_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_low_priority_rx_search_timeout_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_low_priority_rx_search_timeout_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_open_with_offset.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_open_with_offset.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_period_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_period_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_freq_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_freq_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_tx_power_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_tx_power_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_rx_search_timeout_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_rx_search_timeout_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_status_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_status_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_unassign.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_unassign.c</FilePath>            </File>            <File>
+              <FileName>ant_coex_config_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_get.c</FilePath>            </File>            <File>
+              <FileName>ant_coex_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_channel_enable.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_channel_enable.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_info_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_get.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_info_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_set.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_key_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_key_set.c</FilePath>            </File>            <File>
+              <FileName>ant_cw_test_mode.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode.c</FilePath>            </File>            <File>
+              <FileName>ant_cw_test_mode_init.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode_init.c</FilePath>            </File>            <File>
+              <FileName>ant_enable.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_enable.c</FilePath>            </File>            <File>
+              <FileName>ant_event.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_event.c</FilePath>            </File>            <File>
+              <FileName>ant_id_list_add.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_add.c</FilePath>            </File>            <File>
+              <FileName>ant_id_list_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_config.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_clear.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_clear.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_get.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_network_address_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_network_address_set.c</FilePath>            </File>            <File>
+              <FileName>ant_prox_search_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_prox_search_set.c</FilePath>            </File>            <File>
+              <FileName>ant_rx_scan_mode_start.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_rx_scan_mode_start.c</FilePath>            </File>            <File>
+              <FileName>ant_search_channel_priority_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_channel_priority_set.c</FilePath>            </File>            <File>
+              <FileName>ant_search_waveform_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_waveform_set.c</FilePath>            </File>            <File>
+              <FileName>ant_stack_reset.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_stack_reset.c</FilePath>            </File>            <File>
+              <FileName>ant_struct_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant\ant_struct_serialization.c</FilePath>            </File>            <File>
+              <FileName>ant_version_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_version_get.c</FilePath>            </File>            <File>
+              <FileName>app_mw_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\middleware\app_mw_ant.c</FilePath>            </File>            <File>
+              <FileName>ble_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\ble_serialization.c</FilePath>            </File>            <File>
+              <FileName>cond_field_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\cond_field_serialization.c</FilePath>            </File>            <File>
+              <FileName>ser_app_hal_nrf5x.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_hal_nrf5x.c</FilePath>            </File>            <File>
+              <FileName>ser_app_power_system_off.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_power_system_off.c</FilePath>            </File>            <File>
+              <FileName>ser_dbg_sd_str.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\ser_dbg_sd_str.c</FilePath>            </File>            <File>
+              <FileName>ser_hal_transport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\transport\ser_hal_transport.c</FilePath>            </File>            <File>
+              <FileName>ser_phy_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\ser_phy_uart.c</FilePath>            </File>            <File>
+              <FileName>ser_sd_transport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\transport\ser_sd_transport.c</FilePath>            </File>            <File>
+              <FileName>ser_softdevice_handler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\transport\ser_softdevice_handler.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/armgcc/Makefile
new file mode 100644
index 0000000..3e841e1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/armgcc/Makefile
@@ -0,0 +1,259 @@
+PROJECT_NAME     := ant_io_rx_d52_starterkit_s212_uart
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_io_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/uart/app_uart.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/queue/nrf_queue.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_acknowledge_message_tx.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_active_search_sharing_cycles_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_active_search_sharing_cycles_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_adv_burst_config_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_broadcast_message_tx.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_capabilities_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_assign.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_close.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_id_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_id_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_low_priority_rx_search_timeout_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_open_with_offset.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_period_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_period_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_radio_freq_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_radio_freq_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_radio_tx_power_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_rx_search_timeout_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_status_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_unassign.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_coex_config_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_coex_config_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_crypto_channel_enable.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_crypto_info_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_crypto_info_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_crypto_key_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_cw_test_mode.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_cw_test_mode_init.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_enable.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_event.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_id_list_add.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_id_list_config.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_lib_config_clear.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_lib_config_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_lib_config_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_network_address_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_prox_search_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_rx_scan_mode_start.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_search_channel_priority_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_search_waveform_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_stack_reset.c \
+  $(SDK_ROOT)/components/serialization/common/struct_ser/ant/ant_struct_serialization.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_version_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/middleware/app_mw_ant.c \
+  $(SDK_ROOT)/components/serialization/common/ble_serialization.c \
+  $(SDK_ROOT)/components/serialization/common/cond_field_serialization.c \
+  $(SDK_ROOT)/components/serialization/application/hal/ser_app_hal_nrf5x.c \
+  $(SDK_ROOT)/components/serialization/application/hal/ser_app_power_system_off.c \
+  $(SDK_ROOT)/components/serialization/common/ser_dbg_sd_str.c \
+  $(SDK_ROOT)/components/serialization/common/transport/ser_hal_transport.c \
+  $(SDK_ROOT)/components/serialization/common/transport/ser_phy/ser_phy_uart.c \
+  $(SDK_ROOT)/components/serialization/application/transport/ser_sd_transport.c \
+  $(SDK_ROOT)/components/serialization/application/transport/ser_softdevice_handler.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_clock.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/hal/nrf_nvmc.c \
+  $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd/nrf_soc.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_clock.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_power_clock.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_io_rx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components/serialization/application/transport \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/uart \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/serialization/common/struct_ser/ant \
+  $(SDK_ROOT)/components/serialization/common/transport/ser_phy/config \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/serialization/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/serialization/application/hal \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/serialization/common/transport/ser_phy \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/queue \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/serialization/common/transport \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSVCALL_AS_NORMAL_FUNCTION
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSVCALL_AS_NORMAL_FUNCTION
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/armgcc/ant_io_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/armgcc/ant_io_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..e470300
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/armgcc/ant_io_rx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x0, LENGTH = 0x80000
+  RAM (rwx) :  ORIGIN = 0x20000000, LENGTH = 0x10000
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+    .nrf_queue :
+  {
+    PROVIDE(__start_nrf_queue = .);
+    KEEP(*(.nrf_queue))
+    PROVIDE(__stop_nrf_queue = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/config/sdk_config.h
new file mode 100644
index 0000000..9e60bf3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/config/sdk_config.h
@@ -0,0 +1,4038 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer
+//==========================================================
+#ifndef CLOCK_ENABLED
+#define CLOCK_ENABLED 1
+#endif
+// <o> CLOCK_CONFIG_LF_SRC  - LF Clock Source
+ 
+// <0=> RC 
+// <1=> XTAL 
+// <2=> Synth 
+
+#ifndef CLOCK_CONFIG_LF_SRC
+#define CLOCK_CONFIG_LF_SRC 1
+#endif
+
+// <o> CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef CLOCK_CONFIG_IRQ_PRIORITY
+#define CLOCK_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
+//==========================================================
+#ifndef NRFX_CLOCK_ENABLED
+#define NRFX_CLOCK_ENABLED 1
+#endif
+// <o> NRFX_CLOCK_CONFIG_LF_SRC  - LF Clock Source
+ 
+// <0=> RC 
+// <1=> XTAL 
+// <2=> Synth 
+
+#ifndef NRFX_CLOCK_CONFIG_LF_SRC
+#define NRFX_CLOCK_CONFIG_LF_SRC 1
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY
+#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED
+#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL
+#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR
+#define NRFX_CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR
+#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> APP_UART_ENABLED - app_uart - UART driver
+//==========================================================
+#ifndef APP_UART_ENABLED
+#define APP_UART_ENABLED 1
+#endif
+// <o> APP_UART_DRIVER_INSTANCE  - UART instance used
+ 
+// <0=> 0 
+
+#ifndef APP_UART_DRIVER_INSTANCE
+#define APP_UART_DRIVER_INSTANCE 0
+#endif
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_ENABLED - nrf_queue - Queue module
+//==========================================================
+#ifndef NRF_QUEUE_ENABLED
+#define NRF_QUEUE_ENABLED 1
+#endif
+// <q> NRF_QUEUE_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_QUEUE_CLI_CMDS
+#define NRF_QUEUE_CLI_CMDS 0
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/iar/ant_io_rx_d52_starterkit_s212_uart.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/iar/ant_io_rx_d52_starterkit_s212_uart.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/iar/ant_io_rx_d52_starterkit_s212_uart.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/iar/ant_io_rx_d52_starterkit_s212_uart.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/iar/ant_io_rx_d52_starterkit_s212_uart.ewp
new file mode 100644
index 0000000..f410374
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/iar/ant_io_rx_d52_starterkit_s212_uart.ewp
@@ -0,0 +1,1167 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SVCALL_AS_NORMAL_FUNCTION</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\queue</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\uart</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\transport</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SVCALL_AS_NORMAL_FUNCTION</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\queue</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\uart</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\transport</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_io_rx_d52_starterkit_s212_uart.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_io_rx_d52_starterkit_s212_uart.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_io_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\uart\app_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\queue\nrf_queue.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Serialization</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_acknowledge_message_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_adv_burst_config_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_broadcast_message_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_capabilities_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_assign.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_close.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_low_priority_rx_search_timeout_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_open_with_offset.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_tx_power_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_rx_search_timeout_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_status_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_unassign.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_channel_enable.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_key_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode_init.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_enable.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_event.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_add.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_clear.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_network_address_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_prox_search_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_rx_scan_mode_start.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_channel_priority_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_waveform_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_stack_reset.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant\ant_struct_serialization.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_version_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\middleware\app_mw_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\ble_serialization.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\cond_field_serialization.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_hal_nrf5x.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_power_system_off.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\ser_dbg_sd_str.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_hal_transport.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\ser_phy_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\transport\ser_sd_transport.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\transport\ser_softdevice_handler.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal\nrf_nvmc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_io_rx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/iar/ant_io_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/iar/ant_io_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..d56c831
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/iar/ant_io_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x0;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x0;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/ses/ant_io_rx_d52_starterkit_s212_uart.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/ses/ant_io_rx_d52_starterkit_s212_uart.emProject
new file mode 100644
index 0000000..4b6b392
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/ses/ant_io_rx_d52_starterkit_s212_uart.emProject
@@ -0,0 +1,169 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_io_rx_d52_starterkit_s212_uart" target="8" version="2">
+  <project Name="ant_io_rx_d52_starterkit_s212_uart">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/ant/ant_search_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/queue;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/uart;../../../../../../../components/libraries/util;../../../../../../../components/serialization/application/codecs/ant/serializers;../../../../../../../components/serialization/application/hal;../../../../../../../components/serialization/application/transport;../../../../../../../components/serialization/common;../../../../../../../components/serialization/common/struct_ser/ant;../../../../../../../components/serialization/common/transport;../../../../../../../components/serialization/common/transport/ser_phy;../../../../../../../components/serialization/common/transport/ser_phy/config;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SVCALL_AS_NORMAL_FUNCTION;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x0;FLASH_SIZE=0x80000;RAM_START=0x20000000;RAM_SIZE=0x10000"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/uart/app_uart.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/queue/nrf_queue.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Serialization">
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_acknowledge_message_tx.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_active_search_sharing_cycles_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_active_search_sharing_cycles_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_adv_burst_config_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_broadcast_message_tx.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_capabilities_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_assign.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_close.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_id_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_id_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_low_priority_rx_search_timeout_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_open_with_offset.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_period_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_period_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_radio_freq_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_radio_freq_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_radio_tx_power_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_rx_search_timeout_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_status_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_unassign.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_coex_config_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_coex_config_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_crypto_channel_enable.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_crypto_info_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_crypto_info_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_crypto_key_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_cw_test_mode.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_cw_test_mode_init.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_enable.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_event.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_id_list_add.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_id_list_config.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_lib_config_clear.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_lib_config_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_lib_config_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_network_address_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_prox_search_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_rx_scan_mode_start.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_search_channel_priority_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_search_waveform_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_stack_reset.c" />
+      <file file_name="../../../../../../../components/serialization/common/struct_ser/ant/ant_struct_serialization.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_version_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/middleware/app_mw_ant.c" />
+      <file file_name="../../../../../../../components/serialization/common/ble_serialization.c" />
+      <file file_name="../../../../../../../components/serialization/common/cond_field_serialization.c" />
+      <file file_name="../../../../../../../components/serialization/application/hal/ser_app_hal_nrf5x.c" />
+      <file file_name="../../../../../../../components/serialization/application/hal/ser_app_power_system_off.c" />
+      <file file_name="../../../../../../../components/serialization/common/ser_dbg_sd_str.c" />
+      <file file_name="../../../../../../../components/serialization/common/transport/ser_hal_transport.c" />
+      <file file_name="../../../../../../../components/serialization/common/transport/ser_phy/ser_phy_uart.c" />
+      <file file_name="../../../../../../../components/serialization/application/transport/ser_sd_transport.c" />
+      <file file_name="../../../../../../../components/serialization/application/transport/ser_softdevice_handler.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_clock.c" />
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/hal/nrf_nvmc.c" />
+      <file file_name="../../../../../../../components/drivers_nrf/nrf_soc_nosd/nrf_soc.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_clock.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_power_clock.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_io_rx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/ses/ant_io_rx_d52_starterkit_s212_uart.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/ses/ant_io_rx_d52_starterkit_s212_uart.emSession
new file mode 100644
index 0000000..527c4d8
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/ses/ant_io_rx_d52_starterkit_s212_uart.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_io_rx_d52_starterkit_s212_uart" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/ses/flash_placement.xml
new file mode 100644
index 0000000..8083695
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/d52_starterkit/ser_s212_uart/ses/flash_placement.xml
@@ -0,0 +1,41 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_queue" inputsections="*(.nrf_queue*)" address_symbol="__start_nrf_queue" end_symbol="__stop_nrf_queue" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/main.c
new file mode 100644
index 0000000..910517d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/main.c
@@ -0,0 +1,132 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/*
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdint.h>
+#include "nrf.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "bsp.h"
+#include "boards.h"
+#include "hardfault.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+#include "ant_io_rx.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+/**@brief Function for the Timer and BSP initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                        NULL);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for ANT stack initialization.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    ant_io_rx_setup();
+
+    NRF_LOG_INFO("ANT IO RX example started.");
+
+    // Enter main loop.
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/arm4/ant_io_rx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/arm4/ant_io_rx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/arm4/ant_io_rx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/arm4/ant_io_rx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/arm4/ant_io_rx_pca10040_s212.uvproj
new file mode 100644
index 0000000..8bcb650
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/arm4/ant_io_rx_pca10040_s212.uvproj
@@ -0,0 +1,554 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_io_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_io_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/arm5_no_packs/ant_io_rx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/arm5_no_packs/ant_io_rx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/arm5_no_packs/ant_io_rx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/arm5_no_packs/ant_io_rx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/arm5_no_packs/ant_io_rx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..ad41372
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/arm5_no_packs/ant_io_rx_pca10040_s212.uvprojx
@@ -0,0 +1,578 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_io_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_io_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..af2b19d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,193 @@
+PROJECT_NAME     := ant_io_rx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_io_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_io_rx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/armgcc/ant_io_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/armgcc/ant_io_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/armgcc/ant_io_rx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..5f6bddf
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3892 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/iar/ant_io_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/iar/ant_io_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/iar/ant_io_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/iar/ant_io_rx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/iar/ant_io_rx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/iar/ant_io_rx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/iar/ant_io_rx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/iar/ant_io_rx_pca10040_s212.ewp
new file mode 100644
index 0000000..c47da01
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/iar/ant_io_rx_pca10040_s212.ewp
@@ -0,0 +1,1086 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_io_rx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_io_rx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_io_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_io_rx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/ses/ant_io_rx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/ses/ant_io_rx_pca10040_s212.emProject
new file mode 100644
index 0000000..56dfdd4
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/ses/ant_io_rx_pca10040_s212.emProject
@@ -0,0 +1,107 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_io_rx_pca10040_s212" target="8" version="2">
+  <project Name="ant_io_rx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/ant/ant_search_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_io_rx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/ses/ant_io_rx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/ses/ant_io_rx_pca10040_s212.emSession
new file mode 100644
index 0000000..76dd6fe
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/ses/ant_io_rx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_io_rx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/arm4/ant_io_rx_pca10040_s212_uart.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/arm4/ant_io_rx_pca10040_s212_uart.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/arm4/ant_io_rx_pca10040_s212_uart.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/arm4/ant_io_rx_pca10040_s212_uart.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/arm4/ant_io_rx_pca10040_s212_uart.uvproj
new file mode 100644
index 0000000..9a3b12c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/arm4/ant_io_rx_pca10040_s212_uart.uvproj
@@ -0,0 +1,737 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SVCALL_AS_NORMAL_FUNCTION SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\queue;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers;..\..\..\..\..\..\..\components\serialization\application\hal;..\..\..\..\..\..\..\components\serialization\application\transport;..\..\..\..\..\..\..\components\serialization\common;..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant;..\..\..\..\..\..\..\components\serialization\common\transport;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSVCALL_AS_NORMAL_FUNCTION,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SVCALL_AS_NORMAL_FUNCTION SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\queue;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers;..\..\..\..\..\..\..\components\serialization\application\hal;..\..\..\..\..\..\..\components\serialization\application\transport;..\..\..\..\..\..\..\components\serialization\common;..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant;..\..\..\..\..\..\..\components\serialization\common\transport;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_io_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_io_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath>            </File>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_nvmc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\hal\nrf_nvmc.c</FilePath>            </File>            <File>
+              <FileName>nrf_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</FilePath>            </File>            <File>
+              <FileName>nrfx_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_power_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\uart\app_uart.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_queue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\queue\nrf_queue.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Serialization</GroupName>
+          <Files>            <File>
+              <FileName>ant_acknowledge_message_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_acknowledge_message_tx.c</FilePath>            </File>            <File>
+              <FileName>ant_active_search_sharing_cycles_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_get.c</FilePath>            </File>            <File>
+              <FileName>ant_active_search_sharing_cycles_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_set.c</FilePath>            </File>            <File>
+              <FileName>ant_adv_burst_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_adv_burst_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_broadcast_message_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_broadcast_message_tx.c</FilePath>            </File>            <File>
+              <FileName>ant_capabilities_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_capabilities_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_assign.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_assign.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_close.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_close.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_id_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_id_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_low_priority_rx_search_timeout_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_low_priority_rx_search_timeout_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_open_with_offset.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_open_with_offset.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_period_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_period_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_freq_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_freq_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_tx_power_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_tx_power_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_rx_search_timeout_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_rx_search_timeout_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_status_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_status_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_unassign.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_unassign.c</FilePath>            </File>            <File>
+              <FileName>ant_coex_config_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_get.c</FilePath>            </File>            <File>
+              <FileName>ant_coex_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_channel_enable.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_channel_enable.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_info_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_get.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_info_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_set.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_key_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_key_set.c</FilePath>            </File>            <File>
+              <FileName>ant_cw_test_mode.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode.c</FilePath>            </File>            <File>
+              <FileName>ant_cw_test_mode_init.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode_init.c</FilePath>            </File>            <File>
+              <FileName>ant_enable.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_enable.c</FilePath>            </File>            <File>
+              <FileName>ant_event.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_event.c</FilePath>            </File>            <File>
+              <FileName>ant_id_list_add.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_add.c</FilePath>            </File>            <File>
+              <FileName>ant_id_list_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_config.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_clear.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_clear.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_get.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_network_address_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_network_address_set.c</FilePath>            </File>            <File>
+              <FileName>ant_prox_search_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_prox_search_set.c</FilePath>            </File>            <File>
+              <FileName>ant_rx_scan_mode_start.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_rx_scan_mode_start.c</FilePath>            </File>            <File>
+              <FileName>ant_search_channel_priority_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_channel_priority_set.c</FilePath>            </File>            <File>
+              <FileName>ant_search_waveform_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_waveform_set.c</FilePath>            </File>            <File>
+              <FileName>ant_stack_reset.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_stack_reset.c</FilePath>            </File>            <File>
+              <FileName>ant_struct_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant\ant_struct_serialization.c</FilePath>            </File>            <File>
+              <FileName>ant_version_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_version_get.c</FilePath>            </File>            <File>
+              <FileName>app_mw_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\middleware\app_mw_ant.c</FilePath>            </File>            <File>
+              <FileName>ble_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\ble_serialization.c</FilePath>            </File>            <File>
+              <FileName>cond_field_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\cond_field_serialization.c</FilePath>            </File>            <File>
+              <FileName>ser_app_hal_nrf5x.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_hal_nrf5x.c</FilePath>            </File>            <File>
+              <FileName>ser_app_power_system_off.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_power_system_off.c</FilePath>            </File>            <File>
+              <FileName>ser_dbg_sd_str.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\ser_dbg_sd_str.c</FilePath>            </File>            <File>
+              <FileName>ser_hal_transport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\transport\ser_hal_transport.c</FilePath>            </File>            <File>
+              <FileName>ser_phy_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\ser_phy_uart.c</FilePath>            </File>            <File>
+              <FileName>ser_sd_transport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\transport\ser_sd_transport.c</FilePath>            </File>            <File>
+              <FileName>ser_softdevice_handler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\transport\ser_softdevice_handler.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/arm5_no_packs/ant_io_rx_pca10040_s212_uart.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/arm5_no_packs/ant_io_rx_pca10040_s212_uart.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/arm5_no_packs/ant_io_rx_pca10040_s212_uart.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/arm5_no_packs/ant_io_rx_pca10040_s212_uart.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/arm5_no_packs/ant_io_rx_pca10040_s212_uart.uvprojx
new file mode 100644
index 0000000..bb2e419
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/arm5_no_packs/ant_io_rx_pca10040_s212_uart.uvprojx
@@ -0,0 +1,761 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SVCALL_AS_NORMAL_FUNCTION SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\queue;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers;..\..\..\..\..\..\..\components\serialization\application\hal;..\..\..\..\..\..\..\components\serialization\application\transport;..\..\..\..\..\..\..\components\serialization\common;..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant;..\..\..\..\..\..\..\components\serialization\common\transport;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSVCALL_AS_NORMAL_FUNCTION,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SVCALL_AS_NORMAL_FUNCTION SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\queue;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers;..\..\..\..\..\..\..\components\serialization\application\hal;..\..\..\..\..\..\..\components\serialization\application\transport;..\..\..\..\..\..\..\components\serialization\common;..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant;..\..\..\..\..\..\..\components\serialization\common\transport;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_io_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_io_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath>            </File>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_nvmc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\hal\nrf_nvmc.c</FilePath>            </File>            <File>
+              <FileName>nrf_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</FilePath>            </File>            <File>
+              <FileName>nrfx_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_power_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\uart\app_uart.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_queue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\queue\nrf_queue.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Serialization</GroupName>
+          <Files>            <File>
+              <FileName>ant_acknowledge_message_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_acknowledge_message_tx.c</FilePath>            </File>            <File>
+              <FileName>ant_active_search_sharing_cycles_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_get.c</FilePath>            </File>            <File>
+              <FileName>ant_active_search_sharing_cycles_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_set.c</FilePath>            </File>            <File>
+              <FileName>ant_adv_burst_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_adv_burst_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_broadcast_message_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_broadcast_message_tx.c</FilePath>            </File>            <File>
+              <FileName>ant_capabilities_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_capabilities_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_assign.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_assign.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_close.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_close.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_id_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_id_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_low_priority_rx_search_timeout_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_low_priority_rx_search_timeout_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_open_with_offset.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_open_with_offset.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_period_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_period_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_freq_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_freq_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_tx_power_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_tx_power_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_rx_search_timeout_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_rx_search_timeout_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_status_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_status_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_unassign.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_unassign.c</FilePath>            </File>            <File>
+              <FileName>ant_coex_config_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_get.c</FilePath>            </File>            <File>
+              <FileName>ant_coex_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_channel_enable.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_channel_enable.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_info_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_get.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_info_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_set.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_key_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_key_set.c</FilePath>            </File>            <File>
+              <FileName>ant_cw_test_mode.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode.c</FilePath>            </File>            <File>
+              <FileName>ant_cw_test_mode_init.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode_init.c</FilePath>            </File>            <File>
+              <FileName>ant_enable.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_enable.c</FilePath>            </File>            <File>
+              <FileName>ant_event.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_event.c</FilePath>            </File>            <File>
+              <FileName>ant_id_list_add.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_add.c</FilePath>            </File>            <File>
+              <FileName>ant_id_list_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_config.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_clear.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_clear.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_get.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_network_address_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_network_address_set.c</FilePath>            </File>            <File>
+              <FileName>ant_prox_search_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_prox_search_set.c</FilePath>            </File>            <File>
+              <FileName>ant_rx_scan_mode_start.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_rx_scan_mode_start.c</FilePath>            </File>            <File>
+              <FileName>ant_search_channel_priority_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_channel_priority_set.c</FilePath>            </File>            <File>
+              <FileName>ant_search_waveform_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_waveform_set.c</FilePath>            </File>            <File>
+              <FileName>ant_stack_reset.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_stack_reset.c</FilePath>            </File>            <File>
+              <FileName>ant_struct_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant\ant_struct_serialization.c</FilePath>            </File>            <File>
+              <FileName>ant_version_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_version_get.c</FilePath>            </File>            <File>
+              <FileName>app_mw_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\middleware\app_mw_ant.c</FilePath>            </File>            <File>
+              <FileName>ble_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\ble_serialization.c</FilePath>            </File>            <File>
+              <FileName>cond_field_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\cond_field_serialization.c</FilePath>            </File>            <File>
+              <FileName>ser_app_hal_nrf5x.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_hal_nrf5x.c</FilePath>            </File>            <File>
+              <FileName>ser_app_power_system_off.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_power_system_off.c</FilePath>            </File>            <File>
+              <FileName>ser_dbg_sd_str.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\ser_dbg_sd_str.c</FilePath>            </File>            <File>
+              <FileName>ser_hal_transport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\transport\ser_hal_transport.c</FilePath>            </File>            <File>
+              <FileName>ser_phy_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\ser_phy_uart.c</FilePath>            </File>            <File>
+              <FileName>ser_sd_transport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\transport\ser_sd_transport.c</FilePath>            </File>            <File>
+              <FileName>ser_softdevice_handler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\transport\ser_softdevice_handler.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/armgcc/Makefile
new file mode 100644
index 0000000..f3e6b2d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/armgcc/Makefile
@@ -0,0 +1,263 @@
+PROJECT_NAME     := ant_io_rx_pca10040_s212_uart
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_io_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/uart/app_uart.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/queue/nrf_queue.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_acknowledge_message_tx.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_active_search_sharing_cycles_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_active_search_sharing_cycles_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_adv_burst_config_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_broadcast_message_tx.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_capabilities_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_assign.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_close.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_id_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_id_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_low_priority_rx_search_timeout_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_open_with_offset.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_period_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_period_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_radio_freq_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_radio_freq_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_radio_tx_power_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_rx_search_timeout_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_status_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_unassign.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_coex_config_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_coex_config_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_crypto_channel_enable.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_crypto_info_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_crypto_info_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_crypto_key_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_cw_test_mode.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_cw_test_mode_init.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_enable.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_event.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_id_list_add.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_id_list_config.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_lib_config_clear.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_lib_config_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_lib_config_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_network_address_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_prox_search_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_rx_scan_mode_start.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_search_channel_priority_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_search_waveform_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_stack_reset.c \
+  $(SDK_ROOT)/components/serialization/common/struct_ser/ant/ant_struct_serialization.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_version_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/middleware/app_mw_ant.c \
+  $(SDK_ROOT)/components/serialization/common/ble_serialization.c \
+  $(SDK_ROOT)/components/serialization/common/cond_field_serialization.c \
+  $(SDK_ROOT)/components/serialization/application/hal/ser_app_hal_nrf5x.c \
+  $(SDK_ROOT)/components/serialization/application/hal/ser_app_power_system_off.c \
+  $(SDK_ROOT)/components/serialization/common/ser_dbg_sd_str.c \
+  $(SDK_ROOT)/components/serialization/common/transport/ser_hal_transport.c \
+  $(SDK_ROOT)/components/serialization/common/transport/ser_phy/ser_phy_uart.c \
+  $(SDK_ROOT)/components/serialization/application/transport/ser_sd_transport.c \
+  $(SDK_ROOT)/components/serialization/application/transport/ser_softdevice_handler.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_clock.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/hal/nrf_nvmc.c \
+  $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd/nrf_soc.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_clock.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_power_clock.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_io_rx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components/serialization/application/transport \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/uart \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/serialization/common/struct_ser/ant \
+  $(SDK_ROOT)/components/serialization/common/transport/ser_phy/config \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/serialization/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/serialization/application/hal \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/serialization/common/transport/ser_phy \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/queue \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/serialization/common/transport \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSVCALL_AS_NORMAL_FUNCTION
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSVCALL_AS_NORMAL_FUNCTION
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/armgcc/ant_io_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/armgcc/ant_io_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..e470300
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/armgcc/ant_io_rx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x0, LENGTH = 0x80000
+  RAM (rwx) :  ORIGIN = 0x20000000, LENGTH = 0x10000
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+    .nrf_queue :
+  {
+    PROVIDE(__start_nrf_queue = .);
+    KEEP(*(.nrf_queue))
+    PROVIDE(__stop_nrf_queue = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/config/sdk_config.h
new file mode 100644
index 0000000..2367d45
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/config/sdk_config.h
@@ -0,0 +1,4038 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer
+//==========================================================
+#ifndef CLOCK_ENABLED
+#define CLOCK_ENABLED 1
+#endif
+// <o> CLOCK_CONFIG_LF_SRC  - LF Clock Source
+ 
+// <0=> RC 
+// <1=> XTAL 
+// <2=> Synth 
+
+#ifndef CLOCK_CONFIG_LF_SRC
+#define CLOCK_CONFIG_LF_SRC 1
+#endif
+
+// <o> CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef CLOCK_CONFIG_IRQ_PRIORITY
+#define CLOCK_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
+//==========================================================
+#ifndef NRFX_CLOCK_ENABLED
+#define NRFX_CLOCK_ENABLED 1
+#endif
+// <o> NRFX_CLOCK_CONFIG_LF_SRC  - LF Clock Source
+ 
+// <0=> RC 
+// <1=> XTAL 
+// <2=> Synth 
+
+#ifndef NRFX_CLOCK_CONFIG_LF_SRC
+#define NRFX_CLOCK_CONFIG_LF_SRC 1
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY
+#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED
+#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL
+#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR
+#define NRFX_CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR
+#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> APP_UART_ENABLED - app_uart - UART driver
+//==========================================================
+#ifndef APP_UART_ENABLED
+#define APP_UART_ENABLED 1
+#endif
+// <o> APP_UART_DRIVER_INSTANCE  - UART instance used
+ 
+// <0=> 0 
+
+#ifndef APP_UART_DRIVER_INSTANCE
+#define APP_UART_DRIVER_INSTANCE 0
+#endif
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_ENABLED - nrf_queue - Queue module
+//==========================================================
+#ifndef NRF_QUEUE_ENABLED
+#define NRF_QUEUE_ENABLED 1
+#endif
+// <q> NRF_QUEUE_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_QUEUE_CLI_CMDS
+#define NRF_QUEUE_CLI_CMDS 0
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/iar/ant_io_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/iar/ant_io_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..d56c831
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/iar/ant_io_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x0;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x0;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/iar/ant_io_rx_pca10040_s212_uart.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/iar/ant_io_rx_pca10040_s212_uart.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/iar/ant_io_rx_pca10040_s212_uart.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/iar/ant_io_rx_pca10040_s212_uart.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/iar/ant_io_rx_pca10040_s212_uart.ewp
new file mode 100644
index 0000000..f4513bc
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/iar/ant_io_rx_pca10040_s212_uart.ewp
@@ -0,0 +1,1171 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SVCALL_AS_NORMAL_FUNCTION</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\queue</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\uart</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\transport</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SVCALL_AS_NORMAL_FUNCTION</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\queue</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\uart</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\transport</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_io_rx_pca10040_s212_uart.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_io_rx_pca10040_s212_uart.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_io_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\uart\app_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\queue\nrf_queue.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Serialization</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_acknowledge_message_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_adv_burst_config_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_broadcast_message_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_capabilities_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_assign.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_close.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_low_priority_rx_search_timeout_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_open_with_offset.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_tx_power_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_rx_search_timeout_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_status_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_unassign.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_channel_enable.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_key_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode_init.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_enable.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_event.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_add.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_clear.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_network_address_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_prox_search_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_rx_scan_mode_start.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_channel_priority_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_waveform_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_stack_reset.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant\ant_struct_serialization.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_version_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\middleware\app_mw_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\ble_serialization.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\cond_field_serialization.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_hal_nrf5x.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_power_system_off.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\ser_dbg_sd_str.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_hal_transport.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\ser_phy_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\transport\ser_sd_transport.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\transport\ser_softdevice_handler.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal\nrf_nvmc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_io_rx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/ses/ant_io_rx_pca10040_s212_uart.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/ses/ant_io_rx_pca10040_s212_uart.emProject
new file mode 100644
index 0000000..c69cd35
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/ses/ant_io_rx_pca10040_s212_uart.emProject
@@ -0,0 +1,169 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_io_rx_pca10040_s212_uart" target="8" version="2">
+  <project Name="ant_io_rx_pca10040_s212_uart">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/ant/ant_search_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/queue;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/uart;../../../../../../../components/libraries/util;../../../../../../../components/serialization/application/codecs/ant/serializers;../../../../../../../components/serialization/application/hal;../../../../../../../components/serialization/application/transport;../../../../../../../components/serialization/common;../../../../../../../components/serialization/common/struct_ser/ant;../../../../../../../components/serialization/common/transport;../../../../../../../components/serialization/common/transport/ser_phy;../../../../../../../components/serialization/common/transport/ser_phy/config;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SVCALL_AS_NORMAL_FUNCTION;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x0;FLASH_SIZE=0x80000;RAM_START=0x20000000;RAM_SIZE=0x10000"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/uart/app_uart.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/queue/nrf_queue.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Serialization">
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_acknowledge_message_tx.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_active_search_sharing_cycles_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_active_search_sharing_cycles_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_adv_burst_config_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_broadcast_message_tx.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_capabilities_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_assign.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_close.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_id_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_id_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_low_priority_rx_search_timeout_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_open_with_offset.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_period_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_period_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_radio_freq_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_radio_freq_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_radio_tx_power_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_rx_search_timeout_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_status_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_unassign.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_coex_config_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_coex_config_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_crypto_channel_enable.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_crypto_info_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_crypto_info_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_crypto_key_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_cw_test_mode.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_cw_test_mode_init.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_enable.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_event.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_id_list_add.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_id_list_config.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_lib_config_clear.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_lib_config_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_lib_config_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_network_address_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_prox_search_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_rx_scan_mode_start.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_search_channel_priority_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_search_waveform_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_stack_reset.c" />
+      <file file_name="../../../../../../../components/serialization/common/struct_ser/ant/ant_struct_serialization.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_version_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/middleware/app_mw_ant.c" />
+      <file file_name="../../../../../../../components/serialization/common/ble_serialization.c" />
+      <file file_name="../../../../../../../components/serialization/common/cond_field_serialization.c" />
+      <file file_name="../../../../../../../components/serialization/application/hal/ser_app_hal_nrf5x.c" />
+      <file file_name="../../../../../../../components/serialization/application/hal/ser_app_power_system_off.c" />
+      <file file_name="../../../../../../../components/serialization/common/ser_dbg_sd_str.c" />
+      <file file_name="../../../../../../../components/serialization/common/transport/ser_hal_transport.c" />
+      <file file_name="../../../../../../../components/serialization/common/transport/ser_phy/ser_phy_uart.c" />
+      <file file_name="../../../../../../../components/serialization/application/transport/ser_sd_transport.c" />
+      <file file_name="../../../../../../../components/serialization/application/transport/ser_softdevice_handler.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_clock.c" />
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/hal/nrf_nvmc.c" />
+      <file file_name="../../../../../../../components/drivers_nrf/nrf_soc_nosd/nrf_soc.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_clock.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_power_clock.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_io_rx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/ses/ant_io_rx_pca10040_s212_uart.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/ses/ant_io_rx_pca10040_s212_uart.emSession
new file mode 100644
index 0000000..9869f10
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/ses/ant_io_rx_pca10040_s212_uart.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_io_rx_pca10040_s212_uart" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/ses/flash_placement.xml
new file mode 100644
index 0000000..8083695
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_rx/pca10040/ser_s212_uart/ses/flash_placement.xml
@@ -0,0 +1,41 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_queue" inputsections="*(.nrf_queue*)" address_symbol="__start_nrf_queue" end_symbol="__stop_nrf_queue" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/ant_io_tx.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/ant_io_tx.c
new file mode 100644
index 0000000..b6cb741
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/ant_io_tx.c
@@ -0,0 +1,220 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#include "ant_io_tx.h"
+#include <stdint.h>
+#include "string.h"
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "app_error.h"
+#include "ant_error.h"
+#include "boards.h"
+#include "sdk_config.h"
+#include "ant_channel_config.h"
+#include "nrf_soc.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+
+// Data Page Numbers
+#define DIGITALIO_DATA_PID              1u                      /**< Page number: digital data. */
+
+#define APP_ANT_OBSERVER_PRIO           1                       /**< Application's ANT observer priority. You shouldn't need to modify this value. */
+
+// Static variables and buffers.
+static uint8_t m_broadcast_data[ANT_STANDARD_DATA_PAYLOAD_SIZE];    /**< Primary data transmit buffer. */
+static uint8_t m_rx_input_pin_state = 0xFF;                         /**< State of received digital data, from the other node. */
+static uint8_t m_tx_input_pin_state = 0xFF;                         /**< State of digital inputs in this node, for transmission. */
+
+
+/**@brief Encode current state of buttons
+ *
+ * Configure bitfield encoding the state of the buttons
+ * Bit 0 = 0 if BSP_BUTTON_0 is pressed
+ * Bit 1 = 0 if BSP_BUTTON_1 is pressed
+ * Bit 2 = 0 if BSP_BUTTON_2 is pressed
+ * Bit 3 = 0 if BSP_BUTTON_3 is pressed
+ * Bit 4-7 = 1 (unused)
+ */
+static void button_state_encode(void)
+{
+    m_tx_input_pin_state = 0xFF;
+
+    if (bsp_button_is_pressed(0))
+    {
+        m_tx_input_pin_state &= 0xFE;
+    }
+
+    if (bsp_button_is_pressed(1))
+    {
+        m_tx_input_pin_state &= 0xFD;
+    }
+
+    if (bsp_button_is_pressed(2))
+    {
+        m_tx_input_pin_state &= 0xFB;
+    }
+
+    if (bsp_button_is_pressed(3))
+    {
+        m_tx_input_pin_state &= 0xF7;
+    }
+}
+
+
+/**@brief Formats page with current button state and sends data
+ * Byte 0   = Page number (Digital I/O Data)
+ * Byte 1-6 = Reserved
+ * Byte 7   = State of digital inputs
+ */
+static void handle_transmit()
+{
+    uint32_t err_code;
+
+    button_state_encode();
+
+    m_broadcast_data[0] = DIGITALIO_DATA_PID;
+    m_broadcast_data[1] = 0xFF;
+    m_broadcast_data[2] = 0xFF;
+    m_broadcast_data[3] = 0xFF;
+    m_broadcast_data[4] = 0xFF;
+    m_broadcast_data[5] = 0xFF;
+    m_broadcast_data[6] = 0xFF;
+    m_broadcast_data[7] = m_tx_input_pin_state;
+
+    err_code = sd_ant_broadcast_message_tx(ANT_CHANNEL_NUM,
+                                           ANT_STANDARD_DATA_PAYLOAD_SIZE,
+                                           m_broadcast_data);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**@brief Turns on LEDs according to the contents of the received data page.
+ */
+static void led_state_set()
+{
+    uint8_t led_state_field = ~m_rx_input_pin_state;
+
+    if (led_state_field & 1)
+        bsp_board_led_on(BSP_BOARD_LED_0);
+    else
+        bsp_board_led_off(BSP_BOARD_LED_0);
+
+    if (led_state_field & 2)
+        bsp_board_led_on(BSP_BOARD_LED_1);
+    else
+        bsp_board_led_off(BSP_BOARD_LED_1);
+
+    if (led_state_field & 4)
+        bsp_board_led_on(BSP_BOARD_LED_2);
+    else
+        bsp_board_led_off(BSP_BOARD_LED_2);
+
+    if (led_state_field & 8)
+        bsp_board_led_on(BSP_BOARD_LED_3);
+    else
+        bsp_board_led_off(BSP_BOARD_LED_3);
+}
+
+
+void ant_io_tx_setup(void)
+{
+    uint32_t err_code;
+
+    ant_channel_config_t channel_config =
+    {
+        .channel_number    = ANT_CHANNEL_NUM,
+        .channel_type      = CHANNEL_TYPE_MASTER,
+        .ext_assign        = 0x00,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .device_number     = NRF_FICR->DEVICEID[0],
+        .channel_period    = CHAN_PERIOD,
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    // Configure channel parameters
+    err_code = ant_channel_init(&channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Open channel.
+    err_code = sd_ant_channel_open(ANT_CHANNEL_NUM);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for handling a ANT stack event.
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+static void ant_evt_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    switch (p_ant_evt->event)
+    {
+        case EVENT_RX:
+            if (p_ant_evt->message.ANT_MESSAGE_aucPayload[0] == DIGITALIO_DATA_PID)
+            {
+                // Set LEDs according to Received Digital IO Data Page
+                m_rx_input_pin_state = p_ant_evt->message.ANT_MESSAGE_aucPayload[7];
+                led_state_set();
+            }
+            break;
+
+        case EVENT_TX:
+            // Transmit data on the reverse direction every channel period
+            handle_transmit();
+            break;
+
+        default:
+            break;
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, APP_ANT_OBSERVER_PRIO, ant_evt_handler, NULL);
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/ant_io_tx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/ant_io_tx.eww
new file mode 100644
index 0000000..e593ebd
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/ant_io_tx.eww
@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_io_tx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_io_tx_d52_starterkit_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\pca10040\ser_s212_uart\iar\ant_io_tx_pca10040_s212_uart.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\ser_s212_uart\iar\ant_io_tx_d52_starterkit_s212_uart.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/ant_io_tx.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/ant_io_tx.h
new file mode 100644
index 0000000..56f9fcb
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/ant_io_tx.h
@@ -0,0 +1,70 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#ifndef ANT_IO_TX_H__
+#define ANT_IO_TX_H__
+
+#include <stdint.h>
+#include "bsp.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@brief Function for configuring and opening master channel.
+ *
+ */
+void ant_io_tx_setup(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  // ANT_IO_RX_H__
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/ant_io_tx_test.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/ant_io_tx_test.xml
new file mode 100644
index 0000000..ad97c0a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/ant_io_tx_test.xml
@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:2/10/2016 1:03:57 PM-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup />
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">0</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">3</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">34</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">35</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">36</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">37</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">38</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">39</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">40</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/arm4/ant_io_tx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/arm4/ant_io_tx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/arm4/ant_io_tx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/arm4/ant_io_tx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/arm4/ant_io_tx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..0794f70
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/arm4/ant_io_tx_d52_starterkit_s212.uvproj
@@ -0,0 +1,557 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_io_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_io_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/arm5_no_packs/ant_io_tx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/arm5_no_packs/ant_io_tx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/arm5_no_packs/ant_io_tx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/arm5_no_packs/ant_io_tx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/arm5_no_packs/ant_io_tx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..02c1fb7
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/arm5_no_packs/ant_io_tx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,581 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_io_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_io_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..a16f3ad
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,190 @@
+PROJECT_NAME     := ant_io_tx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_io_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_io_tx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/armgcc/ant_io_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/armgcc/ant_io_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/armgcc/ant_io_tx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..49fcb21
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3943 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/iar/ant_io_tx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/iar/ant_io_tx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/iar/ant_io_tx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/iar/ant_io_tx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/iar/ant_io_tx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..0bce76c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/iar/ant_io_tx_d52_starterkit_s212.ewp
@@ -0,0 +1,1083 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_io_tx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_io_tx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_io_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_io_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/iar/ant_io_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/iar/ant_io_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/iar/ant_io_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/ses/ant_io_tx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/ses/ant_io_tx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..a5a953e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/ses/ant_io_tx_d52_starterkit_s212.emProject
@@ -0,0 +1,108 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_io_tx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_io_tx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/ant/ant_search_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_io_tx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/ses/ant_io_tx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/ses/ant_io_tx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..36170f8
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/ses/ant_io_tx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_io_tx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/arm4/ant_io_tx_d52_starterkit_s212_uart.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/arm4/ant_io_tx_d52_starterkit_s212_uart.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/arm4/ant_io_tx_d52_starterkit_s212_uart.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/arm4/ant_io_tx_d52_starterkit_s212_uart.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/arm4/ant_io_tx_d52_starterkit_s212_uart.uvproj
new file mode 100644
index 0000000..02159a6
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/arm4/ant_io_tx_d52_starterkit_s212_uart.uvproj
@@ -0,0 +1,737 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SVCALL_AS_NORMAL_FUNCTION SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\queue;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers;..\..\..\..\..\..\..\components\serialization\application\hal;..\..\..\..\..\..\..\components\serialization\application\transport;..\..\..\..\..\..\..\components\serialization\common;..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant;..\..\..\..\..\..\..\components\serialization\common\transport;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSVCALL_AS_NORMAL_FUNCTION,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SVCALL_AS_NORMAL_FUNCTION SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\queue;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers;..\..\..\..\..\..\..\components\serialization\application\hal;..\..\..\..\..\..\..\components\serialization\application\transport;..\..\..\..\..\..\..\components\serialization\common;..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant;..\..\..\..\..\..\..\components\serialization\common\transport;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_io_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_io_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath>            </File>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_nvmc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\hal\nrf_nvmc.c</FilePath>            </File>            <File>
+              <FileName>nrf_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</FilePath>            </File>            <File>
+              <FileName>nrfx_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_power_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\uart\app_uart.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_queue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\queue\nrf_queue.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Serialization</GroupName>
+          <Files>            <File>
+              <FileName>ant_acknowledge_message_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_acknowledge_message_tx.c</FilePath>            </File>            <File>
+              <FileName>ant_active_search_sharing_cycles_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_get.c</FilePath>            </File>            <File>
+              <FileName>ant_active_search_sharing_cycles_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_set.c</FilePath>            </File>            <File>
+              <FileName>ant_adv_burst_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_adv_burst_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_broadcast_message_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_broadcast_message_tx.c</FilePath>            </File>            <File>
+              <FileName>ant_capabilities_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_capabilities_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_assign.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_assign.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_close.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_close.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_id_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_id_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_low_priority_rx_search_timeout_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_low_priority_rx_search_timeout_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_open_with_offset.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_open_with_offset.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_period_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_period_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_freq_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_freq_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_tx_power_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_tx_power_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_rx_search_timeout_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_rx_search_timeout_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_status_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_status_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_unassign.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_unassign.c</FilePath>            </File>            <File>
+              <FileName>ant_coex_config_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_get.c</FilePath>            </File>            <File>
+              <FileName>ant_coex_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_channel_enable.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_channel_enable.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_info_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_get.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_info_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_set.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_key_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_key_set.c</FilePath>            </File>            <File>
+              <FileName>ant_cw_test_mode.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode.c</FilePath>            </File>            <File>
+              <FileName>ant_cw_test_mode_init.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode_init.c</FilePath>            </File>            <File>
+              <FileName>ant_enable.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_enable.c</FilePath>            </File>            <File>
+              <FileName>ant_event.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_event.c</FilePath>            </File>            <File>
+              <FileName>ant_id_list_add.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_add.c</FilePath>            </File>            <File>
+              <FileName>ant_id_list_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_config.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_clear.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_clear.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_get.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_network_address_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_network_address_set.c</FilePath>            </File>            <File>
+              <FileName>ant_prox_search_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_prox_search_set.c</FilePath>            </File>            <File>
+              <FileName>ant_rx_scan_mode_start.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_rx_scan_mode_start.c</FilePath>            </File>            <File>
+              <FileName>ant_search_channel_priority_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_channel_priority_set.c</FilePath>            </File>            <File>
+              <FileName>ant_search_waveform_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_waveform_set.c</FilePath>            </File>            <File>
+              <FileName>ant_stack_reset.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_stack_reset.c</FilePath>            </File>            <File>
+              <FileName>ant_struct_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant\ant_struct_serialization.c</FilePath>            </File>            <File>
+              <FileName>ant_version_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_version_get.c</FilePath>            </File>            <File>
+              <FileName>app_mw_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\middleware\app_mw_ant.c</FilePath>            </File>            <File>
+              <FileName>ble_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\ble_serialization.c</FilePath>            </File>            <File>
+              <FileName>cond_field_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\cond_field_serialization.c</FilePath>            </File>            <File>
+              <FileName>ser_app_hal_nrf5x.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_hal_nrf5x.c</FilePath>            </File>            <File>
+              <FileName>ser_app_power_system_off.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_power_system_off.c</FilePath>            </File>            <File>
+              <FileName>ser_dbg_sd_str.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\ser_dbg_sd_str.c</FilePath>            </File>            <File>
+              <FileName>ser_hal_transport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\transport\ser_hal_transport.c</FilePath>            </File>            <File>
+              <FileName>ser_phy_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\ser_phy_uart.c</FilePath>            </File>            <File>
+              <FileName>ser_sd_transport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\transport\ser_sd_transport.c</FilePath>            </File>            <File>
+              <FileName>ser_softdevice_handler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\transport\ser_softdevice_handler.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/arm5_no_packs/ant_io_tx_d52_starterkit_s212_uart.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/arm5_no_packs/ant_io_tx_d52_starterkit_s212_uart.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/arm5_no_packs/ant_io_tx_d52_starterkit_s212_uart.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/arm5_no_packs/ant_io_tx_d52_starterkit_s212_uart.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/arm5_no_packs/ant_io_tx_d52_starterkit_s212_uart.uvprojx
new file mode 100644
index 0000000..dd5d8f3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/arm5_no_packs/ant_io_tx_d52_starterkit_s212_uart.uvprojx
@@ -0,0 +1,761 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SVCALL_AS_NORMAL_FUNCTION SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\queue;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers;..\..\..\..\..\..\..\components\serialization\application\hal;..\..\..\..\..\..\..\components\serialization\application\transport;..\..\..\..\..\..\..\components\serialization\common;..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant;..\..\..\..\..\..\..\components\serialization\common\transport;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSVCALL_AS_NORMAL_FUNCTION,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SVCALL_AS_NORMAL_FUNCTION SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\queue;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers;..\..\..\..\..\..\..\components\serialization\application\hal;..\..\..\..\..\..\..\components\serialization\application\transport;..\..\..\..\..\..\..\components\serialization\common;..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant;..\..\..\..\..\..\..\components\serialization\common\transport;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_io_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_io_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath>            </File>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_nvmc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\hal\nrf_nvmc.c</FilePath>            </File>            <File>
+              <FileName>nrf_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</FilePath>            </File>            <File>
+              <FileName>nrfx_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_power_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\uart\app_uart.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_queue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\queue\nrf_queue.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Serialization</GroupName>
+          <Files>            <File>
+              <FileName>ant_acknowledge_message_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_acknowledge_message_tx.c</FilePath>            </File>            <File>
+              <FileName>ant_active_search_sharing_cycles_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_get.c</FilePath>            </File>            <File>
+              <FileName>ant_active_search_sharing_cycles_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_set.c</FilePath>            </File>            <File>
+              <FileName>ant_adv_burst_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_adv_burst_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_broadcast_message_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_broadcast_message_tx.c</FilePath>            </File>            <File>
+              <FileName>ant_capabilities_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_capabilities_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_assign.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_assign.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_close.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_close.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_id_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_id_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_low_priority_rx_search_timeout_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_low_priority_rx_search_timeout_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_open_with_offset.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_open_with_offset.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_period_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_period_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_freq_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_freq_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_tx_power_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_tx_power_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_rx_search_timeout_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_rx_search_timeout_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_status_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_status_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_unassign.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_unassign.c</FilePath>            </File>            <File>
+              <FileName>ant_coex_config_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_get.c</FilePath>            </File>            <File>
+              <FileName>ant_coex_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_channel_enable.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_channel_enable.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_info_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_get.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_info_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_set.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_key_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_key_set.c</FilePath>            </File>            <File>
+              <FileName>ant_cw_test_mode.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode.c</FilePath>            </File>            <File>
+              <FileName>ant_cw_test_mode_init.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode_init.c</FilePath>            </File>            <File>
+              <FileName>ant_enable.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_enable.c</FilePath>            </File>            <File>
+              <FileName>ant_event.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_event.c</FilePath>            </File>            <File>
+              <FileName>ant_id_list_add.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_add.c</FilePath>            </File>            <File>
+              <FileName>ant_id_list_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_config.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_clear.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_clear.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_get.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_network_address_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_network_address_set.c</FilePath>            </File>            <File>
+              <FileName>ant_prox_search_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_prox_search_set.c</FilePath>            </File>            <File>
+              <FileName>ant_rx_scan_mode_start.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_rx_scan_mode_start.c</FilePath>            </File>            <File>
+              <FileName>ant_search_channel_priority_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_channel_priority_set.c</FilePath>            </File>            <File>
+              <FileName>ant_search_waveform_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_waveform_set.c</FilePath>            </File>            <File>
+              <FileName>ant_stack_reset.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_stack_reset.c</FilePath>            </File>            <File>
+              <FileName>ant_struct_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant\ant_struct_serialization.c</FilePath>            </File>            <File>
+              <FileName>ant_version_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_version_get.c</FilePath>            </File>            <File>
+              <FileName>app_mw_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\middleware\app_mw_ant.c</FilePath>            </File>            <File>
+              <FileName>ble_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\ble_serialization.c</FilePath>            </File>            <File>
+              <FileName>cond_field_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\cond_field_serialization.c</FilePath>            </File>            <File>
+              <FileName>ser_app_hal_nrf5x.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_hal_nrf5x.c</FilePath>            </File>            <File>
+              <FileName>ser_app_power_system_off.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_power_system_off.c</FilePath>            </File>            <File>
+              <FileName>ser_dbg_sd_str.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\ser_dbg_sd_str.c</FilePath>            </File>            <File>
+              <FileName>ser_hal_transport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\transport\ser_hal_transport.c</FilePath>            </File>            <File>
+              <FileName>ser_phy_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\ser_phy_uart.c</FilePath>            </File>            <File>
+              <FileName>ser_sd_transport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\transport\ser_sd_transport.c</FilePath>            </File>            <File>
+              <FileName>ser_softdevice_handler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\transport\ser_softdevice_handler.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/armgcc/Makefile
new file mode 100644
index 0000000..7147599
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/armgcc/Makefile
@@ -0,0 +1,259 @@
+PROJECT_NAME     := ant_io_tx_d52_starterkit_s212_uart
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_io_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/uart/app_uart.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/queue/nrf_queue.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_acknowledge_message_tx.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_active_search_sharing_cycles_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_active_search_sharing_cycles_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_adv_burst_config_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_broadcast_message_tx.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_capabilities_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_assign.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_close.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_id_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_id_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_low_priority_rx_search_timeout_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_open_with_offset.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_period_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_period_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_radio_freq_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_radio_freq_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_radio_tx_power_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_rx_search_timeout_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_status_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_unassign.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_coex_config_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_coex_config_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_crypto_channel_enable.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_crypto_info_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_crypto_info_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_crypto_key_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_cw_test_mode.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_cw_test_mode_init.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_enable.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_event.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_id_list_add.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_id_list_config.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_lib_config_clear.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_lib_config_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_lib_config_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_network_address_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_prox_search_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_rx_scan_mode_start.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_search_channel_priority_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_search_waveform_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_stack_reset.c \
+  $(SDK_ROOT)/components/serialization/common/struct_ser/ant/ant_struct_serialization.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_version_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/middleware/app_mw_ant.c \
+  $(SDK_ROOT)/components/serialization/common/ble_serialization.c \
+  $(SDK_ROOT)/components/serialization/common/cond_field_serialization.c \
+  $(SDK_ROOT)/components/serialization/application/hal/ser_app_hal_nrf5x.c \
+  $(SDK_ROOT)/components/serialization/application/hal/ser_app_power_system_off.c \
+  $(SDK_ROOT)/components/serialization/common/ser_dbg_sd_str.c \
+  $(SDK_ROOT)/components/serialization/common/transport/ser_hal_transport.c \
+  $(SDK_ROOT)/components/serialization/common/transport/ser_phy/ser_phy_uart.c \
+  $(SDK_ROOT)/components/serialization/application/transport/ser_sd_transport.c \
+  $(SDK_ROOT)/components/serialization/application/transport/ser_softdevice_handler.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_clock.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/hal/nrf_nvmc.c \
+  $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd/nrf_soc.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_clock.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_power_clock.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_io_tx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components/serialization/application/transport \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/uart \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/serialization/common/struct_ser/ant \
+  $(SDK_ROOT)/components/serialization/common/transport/ser_phy/config \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/serialization/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/serialization/application/hal \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/serialization/common/transport/ser_phy \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/queue \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/serialization/common/transport \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSVCALL_AS_NORMAL_FUNCTION
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSVCALL_AS_NORMAL_FUNCTION
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/armgcc/ant_io_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/armgcc/ant_io_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..e470300
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/armgcc/ant_io_tx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x0, LENGTH = 0x80000
+  RAM (rwx) :  ORIGIN = 0x20000000, LENGTH = 0x10000
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+    .nrf_queue :
+  {
+    PROVIDE(__start_nrf_queue = .);
+    KEEP(*(.nrf_queue))
+    PROVIDE(__stop_nrf_queue = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/config/sdk_config.h
new file mode 100644
index 0000000..8c2bb69
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/config/sdk_config.h
@@ -0,0 +1,4033 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer
+//==========================================================
+#ifndef CLOCK_ENABLED
+#define CLOCK_ENABLED 1
+#endif
+// <o> CLOCK_CONFIG_LF_SRC  - LF Clock Source
+ 
+// <0=> RC 
+// <1=> XTAL 
+// <2=> Synth 
+
+#ifndef CLOCK_CONFIG_LF_SRC
+#define CLOCK_CONFIG_LF_SRC 1
+#endif
+
+// <o> CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef CLOCK_CONFIG_IRQ_PRIORITY
+#define CLOCK_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
+//==========================================================
+#ifndef NRFX_CLOCK_ENABLED
+#define NRFX_CLOCK_ENABLED 1
+#endif
+// <o> NRFX_CLOCK_CONFIG_LF_SRC  - LF Clock Source
+ 
+// <0=> RC 
+// <1=> XTAL 
+// <2=> Synth 
+
+#ifndef NRFX_CLOCK_CONFIG_LF_SRC
+#define NRFX_CLOCK_CONFIG_LF_SRC 1
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY
+#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED
+#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL
+#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR
+#define NRFX_CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR
+#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> APP_UART_ENABLED - app_uart - UART driver
+//==========================================================
+#ifndef APP_UART_ENABLED
+#define APP_UART_ENABLED 1
+#endif
+// <o> APP_UART_DRIVER_INSTANCE  - UART instance used
+ 
+// <0=> 0 
+
+#ifndef APP_UART_DRIVER_INSTANCE
+#define APP_UART_DRIVER_INSTANCE 0
+#endif
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_ENABLED - nrf_queue - Queue module
+//==========================================================
+#ifndef NRF_QUEUE_ENABLED
+#define NRF_QUEUE_ENABLED 1
+#endif
+// <q> NRF_QUEUE_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_QUEUE_CLI_CMDS
+#define NRF_QUEUE_CLI_CMDS 0
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/iar/ant_io_tx_d52_starterkit_s212_uart.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/iar/ant_io_tx_d52_starterkit_s212_uart.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/iar/ant_io_tx_d52_starterkit_s212_uart.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/iar/ant_io_tx_d52_starterkit_s212_uart.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/iar/ant_io_tx_d52_starterkit_s212_uart.ewp
new file mode 100644
index 0000000..9f93654
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/iar/ant_io_tx_d52_starterkit_s212_uart.ewp
@@ -0,0 +1,1167 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SVCALL_AS_NORMAL_FUNCTION</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\queue</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\uart</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\transport</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SVCALL_AS_NORMAL_FUNCTION</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\queue</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\uart</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\transport</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_io_tx_d52_starterkit_s212_uart.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_io_tx_d52_starterkit_s212_uart.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_io_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\uart\app_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\queue\nrf_queue.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Serialization</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_acknowledge_message_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_adv_burst_config_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_broadcast_message_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_capabilities_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_assign.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_close.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_low_priority_rx_search_timeout_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_open_with_offset.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_tx_power_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_rx_search_timeout_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_status_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_unassign.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_channel_enable.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_key_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode_init.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_enable.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_event.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_add.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_clear.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_network_address_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_prox_search_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_rx_scan_mode_start.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_channel_priority_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_waveform_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_stack_reset.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant\ant_struct_serialization.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_version_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\middleware\app_mw_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\ble_serialization.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\cond_field_serialization.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_hal_nrf5x.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_power_system_off.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\ser_dbg_sd_str.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_hal_transport.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\ser_phy_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\transport\ser_sd_transport.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\transport\ser_softdevice_handler.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal\nrf_nvmc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_io_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/iar/ant_io_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/iar/ant_io_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..d56c831
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/iar/ant_io_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x0;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x0;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/ses/ant_io_tx_d52_starterkit_s212_uart.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/ses/ant_io_tx_d52_starterkit_s212_uart.emProject
new file mode 100644
index 0000000..923f86c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/ses/ant_io_tx_d52_starterkit_s212_uart.emProject
@@ -0,0 +1,169 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_io_tx_d52_starterkit_s212_uart" target="8" version="2">
+  <project Name="ant_io_tx_d52_starterkit_s212_uart">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/ant/ant_search_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/queue;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/uart;../../../../../../../components/libraries/util;../../../../../../../components/serialization/application/codecs/ant/serializers;../../../../../../../components/serialization/application/hal;../../../../../../../components/serialization/application/transport;../../../../../../../components/serialization/common;../../../../../../../components/serialization/common/struct_ser/ant;../../../../../../../components/serialization/common/transport;../../../../../../../components/serialization/common/transport/ser_phy;../../../../../../../components/serialization/common/transport/ser_phy/config;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SVCALL_AS_NORMAL_FUNCTION;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x0;FLASH_SIZE=0x80000;RAM_START=0x20000000;RAM_SIZE=0x10000"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/uart/app_uart.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/queue/nrf_queue.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Serialization">
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_acknowledge_message_tx.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_active_search_sharing_cycles_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_active_search_sharing_cycles_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_adv_burst_config_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_broadcast_message_tx.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_capabilities_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_assign.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_close.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_id_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_id_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_low_priority_rx_search_timeout_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_open_with_offset.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_period_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_period_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_radio_freq_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_radio_freq_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_radio_tx_power_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_rx_search_timeout_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_status_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_unassign.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_coex_config_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_coex_config_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_crypto_channel_enable.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_crypto_info_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_crypto_info_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_crypto_key_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_cw_test_mode.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_cw_test_mode_init.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_enable.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_event.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_id_list_add.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_id_list_config.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_lib_config_clear.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_lib_config_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_lib_config_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_network_address_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_prox_search_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_rx_scan_mode_start.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_search_channel_priority_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_search_waveform_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_stack_reset.c" />
+      <file file_name="../../../../../../../components/serialization/common/struct_ser/ant/ant_struct_serialization.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_version_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/middleware/app_mw_ant.c" />
+      <file file_name="../../../../../../../components/serialization/common/ble_serialization.c" />
+      <file file_name="../../../../../../../components/serialization/common/cond_field_serialization.c" />
+      <file file_name="../../../../../../../components/serialization/application/hal/ser_app_hal_nrf5x.c" />
+      <file file_name="../../../../../../../components/serialization/application/hal/ser_app_power_system_off.c" />
+      <file file_name="../../../../../../../components/serialization/common/ser_dbg_sd_str.c" />
+      <file file_name="../../../../../../../components/serialization/common/transport/ser_hal_transport.c" />
+      <file file_name="../../../../../../../components/serialization/common/transport/ser_phy/ser_phy_uart.c" />
+      <file file_name="../../../../../../../components/serialization/application/transport/ser_sd_transport.c" />
+      <file file_name="../../../../../../../components/serialization/application/transport/ser_softdevice_handler.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_clock.c" />
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/hal/nrf_nvmc.c" />
+      <file file_name="../../../../../../../components/drivers_nrf/nrf_soc_nosd/nrf_soc.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_clock.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_power_clock.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_io_tx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/ses/ant_io_tx_d52_starterkit_s212_uart.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/ses/ant_io_tx_d52_starterkit_s212_uart.emSession
new file mode 100644
index 0000000..8015149
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/ses/ant_io_tx_d52_starterkit_s212_uart.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_io_tx_d52_starterkit_s212_uart" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/ses/flash_placement.xml
new file mode 100644
index 0000000..8083695
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/d52_starterkit/ser_s212_uart/ses/flash_placement.xml
@@ -0,0 +1,41 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_queue" inputsections="*(.nrf_queue*)" address_symbol="__start_nrf_queue" end_symbol="__stop_nrf_queue" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/main.c
new file mode 100644
index 0000000..e265ea8
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/main.c
@@ -0,0 +1,131 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/*
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdint.h>
+#include "nrf.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "bsp.h"
+#include "boards.h"
+#include "hardfault.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+#include "ant_io_tx.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+/**@brief Function for the Timer and BSP initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                        NULL);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for ANT stack initialization.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    ant_io_tx_setup();
+
+    NRF_LOG_INFO("ANT IO TX example started.");
+
+    // Enter main loop.
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/arm4/ant_io_tx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/arm4/ant_io_tx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/arm4/ant_io_tx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/arm4/ant_io_tx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/arm4/ant_io_tx_pca10040_s212.uvproj
new file mode 100644
index 0000000..15311bb
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/arm4/ant_io_tx_pca10040_s212.uvproj
@@ -0,0 +1,554 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_io_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_io_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/arm5_no_packs/ant_io_tx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/arm5_no_packs/ant_io_tx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/arm5_no_packs/ant_io_tx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/arm5_no_packs/ant_io_tx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/arm5_no_packs/ant_io_tx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..98f93a1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/arm5_no_packs/ant_io_tx_pca10040_s212.uvprojx
@@ -0,0 +1,578 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_io_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_io_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..414fb4a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,193 @@
+PROJECT_NAME     := ant_io_tx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_io_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_io_tx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/armgcc/ant_io_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/armgcc/ant_io_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/armgcc/ant_io_tx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..cf1958c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3887 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/iar/ant_io_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/iar/ant_io_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/iar/ant_io_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/iar/ant_io_tx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/iar/ant_io_tx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/iar/ant_io_tx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/iar/ant_io_tx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/iar/ant_io_tx_pca10040_s212.ewp
new file mode 100644
index 0000000..64a8f4a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/iar/ant_io_tx_pca10040_s212.ewp
@@ -0,0 +1,1086 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_io_tx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_io_tx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_io_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_io_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/ses/ant_io_tx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/ses/ant_io_tx_pca10040_s212.emProject
new file mode 100644
index 0000000..6823e02
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/ses/ant_io_tx_pca10040_s212.emProject
@@ -0,0 +1,107 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_io_tx_pca10040_s212" target="8" version="2">
+  <project Name="ant_io_tx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/ant/ant_search_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_io_tx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/ses/ant_io_tx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/ses/ant_io_tx_pca10040_s212.emSession
new file mode 100644
index 0000000..b145c10
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/ses/ant_io_tx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_io_tx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/arm4/ant_io_tx_pca10040_s212_uart.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/arm4/ant_io_tx_pca10040_s212_uart.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/arm4/ant_io_tx_pca10040_s212_uart.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/arm4/ant_io_tx_pca10040_s212_uart.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/arm4/ant_io_tx_pca10040_s212_uart.uvproj
new file mode 100644
index 0000000..1d8fb43
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/arm4/ant_io_tx_pca10040_s212_uart.uvproj
@@ -0,0 +1,737 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SVCALL_AS_NORMAL_FUNCTION SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\queue;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers;..\..\..\..\..\..\..\components\serialization\application\hal;..\..\..\..\..\..\..\components\serialization\application\transport;..\..\..\..\..\..\..\components\serialization\common;..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant;..\..\..\..\..\..\..\components\serialization\common\transport;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSVCALL_AS_NORMAL_FUNCTION,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SVCALL_AS_NORMAL_FUNCTION SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\queue;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers;..\..\..\..\..\..\..\components\serialization\application\hal;..\..\..\..\..\..\..\components\serialization\application\transport;..\..\..\..\..\..\..\components\serialization\common;..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant;..\..\..\..\..\..\..\components\serialization\common\transport;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_io_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_io_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath>            </File>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_nvmc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\hal\nrf_nvmc.c</FilePath>            </File>            <File>
+              <FileName>nrf_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</FilePath>            </File>            <File>
+              <FileName>nrfx_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_power_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\uart\app_uart.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_queue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\queue\nrf_queue.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Serialization</GroupName>
+          <Files>            <File>
+              <FileName>ant_acknowledge_message_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_acknowledge_message_tx.c</FilePath>            </File>            <File>
+              <FileName>ant_active_search_sharing_cycles_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_get.c</FilePath>            </File>            <File>
+              <FileName>ant_active_search_sharing_cycles_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_set.c</FilePath>            </File>            <File>
+              <FileName>ant_adv_burst_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_adv_burst_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_broadcast_message_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_broadcast_message_tx.c</FilePath>            </File>            <File>
+              <FileName>ant_capabilities_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_capabilities_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_assign.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_assign.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_close.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_close.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_id_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_id_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_low_priority_rx_search_timeout_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_low_priority_rx_search_timeout_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_open_with_offset.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_open_with_offset.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_period_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_period_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_freq_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_freq_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_tx_power_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_tx_power_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_rx_search_timeout_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_rx_search_timeout_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_status_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_status_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_unassign.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_unassign.c</FilePath>            </File>            <File>
+              <FileName>ant_coex_config_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_get.c</FilePath>            </File>            <File>
+              <FileName>ant_coex_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_channel_enable.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_channel_enable.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_info_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_get.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_info_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_set.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_key_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_key_set.c</FilePath>            </File>            <File>
+              <FileName>ant_cw_test_mode.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode.c</FilePath>            </File>            <File>
+              <FileName>ant_cw_test_mode_init.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode_init.c</FilePath>            </File>            <File>
+              <FileName>ant_enable.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_enable.c</FilePath>            </File>            <File>
+              <FileName>ant_event.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_event.c</FilePath>            </File>            <File>
+              <FileName>ant_id_list_add.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_add.c</FilePath>            </File>            <File>
+              <FileName>ant_id_list_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_config.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_clear.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_clear.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_get.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_network_address_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_network_address_set.c</FilePath>            </File>            <File>
+              <FileName>ant_prox_search_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_prox_search_set.c</FilePath>            </File>            <File>
+              <FileName>ant_rx_scan_mode_start.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_rx_scan_mode_start.c</FilePath>            </File>            <File>
+              <FileName>ant_search_channel_priority_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_channel_priority_set.c</FilePath>            </File>            <File>
+              <FileName>ant_search_waveform_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_waveform_set.c</FilePath>            </File>            <File>
+              <FileName>ant_stack_reset.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_stack_reset.c</FilePath>            </File>            <File>
+              <FileName>ant_struct_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant\ant_struct_serialization.c</FilePath>            </File>            <File>
+              <FileName>ant_version_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_version_get.c</FilePath>            </File>            <File>
+              <FileName>app_mw_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\middleware\app_mw_ant.c</FilePath>            </File>            <File>
+              <FileName>ble_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\ble_serialization.c</FilePath>            </File>            <File>
+              <FileName>cond_field_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\cond_field_serialization.c</FilePath>            </File>            <File>
+              <FileName>ser_app_hal_nrf5x.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_hal_nrf5x.c</FilePath>            </File>            <File>
+              <FileName>ser_app_power_system_off.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_power_system_off.c</FilePath>            </File>            <File>
+              <FileName>ser_dbg_sd_str.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\ser_dbg_sd_str.c</FilePath>            </File>            <File>
+              <FileName>ser_hal_transport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\transport\ser_hal_transport.c</FilePath>            </File>            <File>
+              <FileName>ser_phy_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\ser_phy_uart.c</FilePath>            </File>            <File>
+              <FileName>ser_sd_transport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\transport\ser_sd_transport.c</FilePath>            </File>            <File>
+              <FileName>ser_softdevice_handler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\transport\ser_softdevice_handler.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/arm5_no_packs/ant_io_tx_pca10040_s212_uart.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/arm5_no_packs/ant_io_tx_pca10040_s212_uart.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/arm5_no_packs/ant_io_tx_pca10040_s212_uart.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/arm5_no_packs/ant_io_tx_pca10040_s212_uart.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/arm5_no_packs/ant_io_tx_pca10040_s212_uart.uvprojx
new file mode 100644
index 0000000..1d08e98
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/arm5_no_packs/ant_io_tx_pca10040_s212_uart.uvprojx
@@ -0,0 +1,761 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SVCALL_AS_NORMAL_FUNCTION SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\queue;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers;..\..\..\..\..\..\..\components\serialization\application\hal;..\..\..\..\..\..\..\components\serialization\application\transport;..\..\..\..\..\..\..\components\serialization\common;..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant;..\..\..\..\..\..\..\components\serialization\common\transport;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSVCALL_AS_NORMAL_FUNCTION,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SVCALL_AS_NORMAL_FUNCTION SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\queue;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers;..\..\..\..\..\..\..\components\serialization\application\hal;..\..\..\..\..\..\..\components\serialization\application\transport;..\..\..\..\..\..\..\components\serialization\common;..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant;..\..\..\..\..\..\..\components\serialization\common\transport;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy;..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_io_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_io_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath>            </File>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_nvmc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\hal\nrf_nvmc.c</FilePath>            </File>            <File>
+              <FileName>nrf_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</FilePath>            </File>            <File>
+              <FileName>nrfx_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_power_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\uart\app_uart.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_queue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\queue\nrf_queue.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Serialization</GroupName>
+          <Files>            <File>
+              <FileName>ant_acknowledge_message_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_acknowledge_message_tx.c</FilePath>            </File>            <File>
+              <FileName>ant_active_search_sharing_cycles_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_get.c</FilePath>            </File>            <File>
+              <FileName>ant_active_search_sharing_cycles_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_set.c</FilePath>            </File>            <File>
+              <FileName>ant_adv_burst_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_adv_burst_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_broadcast_message_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_broadcast_message_tx.c</FilePath>            </File>            <File>
+              <FileName>ant_capabilities_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_capabilities_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_assign.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_assign.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_close.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_close.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_id_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_id_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_low_priority_rx_search_timeout_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_low_priority_rx_search_timeout_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_open_with_offset.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_open_with_offset.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_period_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_period_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_freq_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_freq_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_radio_tx_power_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_tx_power_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_rx_search_timeout_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_rx_search_timeout_set.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_status_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_status_get.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_unassign.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_unassign.c</FilePath>            </File>            <File>
+              <FileName>ant_coex_config_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_get.c</FilePath>            </File>            <File>
+              <FileName>ant_coex_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_channel_enable.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_channel_enable.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_info_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_get.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_info_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_set.c</FilePath>            </File>            <File>
+              <FileName>ant_crypto_key_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_key_set.c</FilePath>            </File>            <File>
+              <FileName>ant_cw_test_mode.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode.c</FilePath>            </File>            <File>
+              <FileName>ant_cw_test_mode_init.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode_init.c</FilePath>            </File>            <File>
+              <FileName>ant_enable.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_enable.c</FilePath>            </File>            <File>
+              <FileName>ant_event.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_event.c</FilePath>            </File>            <File>
+              <FileName>ant_id_list_add.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_add.c</FilePath>            </File>            <File>
+              <FileName>ant_id_list_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_config.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_clear.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_clear.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_get.c</FilePath>            </File>            <File>
+              <FileName>ant_lib_config_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_set.c</FilePath>            </File>            <File>
+              <FileName>ant_network_address_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_network_address_set.c</FilePath>            </File>            <File>
+              <FileName>ant_prox_search_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_prox_search_set.c</FilePath>            </File>            <File>
+              <FileName>ant_rx_scan_mode_start.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_rx_scan_mode_start.c</FilePath>            </File>            <File>
+              <FileName>ant_search_channel_priority_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_channel_priority_set.c</FilePath>            </File>            <File>
+              <FileName>ant_search_waveform_set.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_waveform_set.c</FilePath>            </File>            <File>
+              <FileName>ant_stack_reset.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_stack_reset.c</FilePath>            </File>            <File>
+              <FileName>ant_struct_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant\ant_struct_serialization.c</FilePath>            </File>            <File>
+              <FileName>ant_version_get.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_version_get.c</FilePath>            </File>            <File>
+              <FileName>app_mw_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\codecs\ant\middleware\app_mw_ant.c</FilePath>            </File>            <File>
+              <FileName>ble_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\ble_serialization.c</FilePath>            </File>            <File>
+              <FileName>cond_field_serialization.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\cond_field_serialization.c</FilePath>            </File>            <File>
+              <FileName>ser_app_hal_nrf5x.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_hal_nrf5x.c</FilePath>            </File>            <File>
+              <FileName>ser_app_power_system_off.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_power_system_off.c</FilePath>            </File>            <File>
+              <FileName>ser_dbg_sd_str.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\ser_dbg_sd_str.c</FilePath>            </File>            <File>
+              <FileName>ser_hal_transport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\transport\ser_hal_transport.c</FilePath>            </File>            <File>
+              <FileName>ser_phy_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\ser_phy_uart.c</FilePath>            </File>            <File>
+              <FileName>ser_sd_transport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\transport\ser_sd_transport.c</FilePath>            </File>            <File>
+              <FileName>ser_softdevice_handler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\serialization\application\transport\ser_softdevice_handler.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/armgcc/Makefile
new file mode 100644
index 0000000..257533e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/armgcc/Makefile
@@ -0,0 +1,263 @@
+PROJECT_NAME     := ant_io_tx_pca10040_s212_uart
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_io_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/uart/app_uart.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/queue/nrf_queue.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_acknowledge_message_tx.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_active_search_sharing_cycles_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_active_search_sharing_cycles_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_adv_burst_config_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_broadcast_message_tx.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_capabilities_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_assign.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_close.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_id_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_id_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_low_priority_rx_search_timeout_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_open_with_offset.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_period_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_period_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_radio_freq_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_radio_freq_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_radio_tx_power_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_rx_search_timeout_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_status_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_channel_unassign.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_coex_config_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_coex_config_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_crypto_channel_enable.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_crypto_info_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_crypto_info_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_crypto_key_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_cw_test_mode.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_cw_test_mode_init.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_enable.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_event.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_id_list_add.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_id_list_config.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_lib_config_clear.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_lib_config_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_lib_config_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_network_address_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_prox_search_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_rx_scan_mode_start.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_search_channel_priority_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_search_waveform_set.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_stack_reset.c \
+  $(SDK_ROOT)/components/serialization/common/struct_ser/ant/ant_struct_serialization.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers/ant_version_get.c \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/middleware/app_mw_ant.c \
+  $(SDK_ROOT)/components/serialization/common/ble_serialization.c \
+  $(SDK_ROOT)/components/serialization/common/cond_field_serialization.c \
+  $(SDK_ROOT)/components/serialization/application/hal/ser_app_hal_nrf5x.c \
+  $(SDK_ROOT)/components/serialization/application/hal/ser_app_power_system_off.c \
+  $(SDK_ROOT)/components/serialization/common/ser_dbg_sd_str.c \
+  $(SDK_ROOT)/components/serialization/common/transport/ser_hal_transport.c \
+  $(SDK_ROOT)/components/serialization/common/transport/ser_phy/ser_phy_uart.c \
+  $(SDK_ROOT)/components/serialization/application/transport/ser_sd_transport.c \
+  $(SDK_ROOT)/components/serialization/application/transport/ser_softdevice_handler.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_clock.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/hal/nrf_nvmc.c \
+  $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd/nrf_soc.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_clock.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_power_clock.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_io_tx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components/serialization/application/transport \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/uart \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/serialization/common/struct_ser/ant \
+  $(SDK_ROOT)/components/serialization/common/transport/ser_phy/config \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/serialization/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/serialization/application/hal \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/serialization/common/transport/ser_phy \
+  $(SDK_ROOT)/components/serialization/application/codecs/ant/serializers \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/queue \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/serialization/common/transport \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSVCALL_AS_NORMAL_FUNCTION
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSVCALL_AS_NORMAL_FUNCTION
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/armgcc/ant_io_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/armgcc/ant_io_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..e470300
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/armgcc/ant_io_tx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x0, LENGTH = 0x80000
+  RAM (rwx) :  ORIGIN = 0x20000000, LENGTH = 0x10000
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+    .nrf_queue :
+  {
+    PROVIDE(__start_nrf_queue = .);
+    KEEP(*(.nrf_queue))
+    PROVIDE(__stop_nrf_queue = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/config/sdk_config.h
new file mode 100644
index 0000000..954003c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/config/sdk_config.h
@@ -0,0 +1,4033 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer
+//==========================================================
+#ifndef CLOCK_ENABLED
+#define CLOCK_ENABLED 1
+#endif
+// <o> CLOCK_CONFIG_LF_SRC  - LF Clock Source
+ 
+// <0=> RC 
+// <1=> XTAL 
+// <2=> Synth 
+
+#ifndef CLOCK_CONFIG_LF_SRC
+#define CLOCK_CONFIG_LF_SRC 1
+#endif
+
+// <o> CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef CLOCK_CONFIG_IRQ_PRIORITY
+#define CLOCK_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
+//==========================================================
+#ifndef NRFX_CLOCK_ENABLED
+#define NRFX_CLOCK_ENABLED 1
+#endif
+// <o> NRFX_CLOCK_CONFIG_LF_SRC  - LF Clock Source
+ 
+// <0=> RC 
+// <1=> XTAL 
+// <2=> Synth 
+
+#ifndef NRFX_CLOCK_CONFIG_LF_SRC
+#define NRFX_CLOCK_CONFIG_LF_SRC 1
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY
+#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED
+#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL
+#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR
+#define NRFX_CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR
+#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> APP_UART_ENABLED - app_uart - UART driver
+//==========================================================
+#ifndef APP_UART_ENABLED
+#define APP_UART_ENABLED 1
+#endif
+// <o> APP_UART_DRIVER_INSTANCE  - UART instance used
+ 
+// <0=> 0 
+
+#ifndef APP_UART_DRIVER_INSTANCE
+#define APP_UART_DRIVER_INSTANCE 0
+#endif
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_ENABLED - nrf_queue - Queue module
+//==========================================================
+#ifndef NRF_QUEUE_ENABLED
+#define NRF_QUEUE_ENABLED 1
+#endif
+// <q> NRF_QUEUE_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_QUEUE_CLI_CMDS
+#define NRF_QUEUE_CLI_CMDS 0
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/iar/ant_io_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/iar/ant_io_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..d56c831
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/iar/ant_io_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x0;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x0;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/iar/ant_io_tx_pca10040_s212_uart.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/iar/ant_io_tx_pca10040_s212_uart.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/iar/ant_io_tx_pca10040_s212_uart.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/iar/ant_io_tx_pca10040_s212_uart.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/iar/ant_io_tx_pca10040_s212_uart.ewp
new file mode 100644
index 0000000..e57cdef
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/iar/ant_io_tx_pca10040_s212_uart.ewp
@@ -0,0 +1,1171 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SVCALL_AS_NORMAL_FUNCTION</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\queue</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\uart</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\transport</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SVCALL_AS_NORMAL_FUNCTION</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\queue</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\uart</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\transport</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_io_tx_pca10040_s212_uart.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_io_tx_pca10040_s212_uart.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_io_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\uart\app_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\queue\nrf_queue.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Serialization</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_acknowledge_message_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_active_search_sharing_cycles_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_adv_burst_config_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_broadcast_message_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_capabilities_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_assign.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_close.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_id_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_low_priority_rx_search_timeout_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_open_with_offset.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_period_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_freq_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_radio_tx_power_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_rx_search_timeout_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_status_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_channel_unassign.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_coex_config_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_channel_enable.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_info_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_crypto_key_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_cw_test_mode_init.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_enable.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_event.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_add.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_id_list_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_clear.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_lib_config_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_network_address_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_prox_search_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_rx_scan_mode_start.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_channel_priority_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_search_waveform_set.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_stack_reset.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\struct_ser\ant\ant_struct_serialization.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\serializers\ant_version_get.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\codecs\ant\middleware\app_mw_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\ble_serialization.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\cond_field_serialization.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_hal_nrf5x.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\hal\ser_app_power_system_off.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\ser_dbg_sd_str.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_hal_transport.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\common\transport\ser_phy\ser_phy_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\transport\ser_sd_transport.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\serialization\application\transport\ser_softdevice_handler.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal\nrf_nvmc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_io_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/ses/ant_io_tx_pca10040_s212_uart.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/ses/ant_io_tx_pca10040_s212_uart.emProject
new file mode 100644
index 0000000..1a8d0ca
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/ses/ant_io_tx_pca10040_s212_uart.emProject
@@ -0,0 +1,169 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_io_tx_pca10040_s212_uart" target="8" version="2">
+  <project Name="ant_io_tx_pca10040_s212_uart">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/ant/ant_search_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/queue;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/uart;../../../../../../../components/libraries/util;../../../../../../../components/serialization/application/codecs/ant/serializers;../../../../../../../components/serialization/application/hal;../../../../../../../components/serialization/application/transport;../../../../../../../components/serialization/common;../../../../../../../components/serialization/common/struct_ser/ant;../../../../../../../components/serialization/common/transport;../../../../../../../components/serialization/common/transport/ser_phy;../../../../../../../components/serialization/common/transport/ser_phy/config;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SVCALL_AS_NORMAL_FUNCTION;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x0;FLASH_SIZE=0x80000;RAM_START=0x20000000;RAM_SIZE=0x10000"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/uart/app_uart.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/queue/nrf_queue.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Serialization">
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_acknowledge_message_tx.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_active_search_sharing_cycles_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_active_search_sharing_cycles_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_adv_burst_config_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_broadcast_message_tx.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_capabilities_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_assign.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_close.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_id_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_id_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_low_priority_rx_search_timeout_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_open_with_offset.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_period_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_period_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_radio_freq_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_radio_freq_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_radio_tx_power_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_rx_search_timeout_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_status_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_channel_unassign.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_coex_config_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_coex_config_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_crypto_channel_enable.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_crypto_info_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_crypto_info_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_crypto_key_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_cw_test_mode.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_cw_test_mode_init.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_enable.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_event.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_id_list_add.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_id_list_config.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_lib_config_clear.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_lib_config_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_lib_config_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_network_address_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_prox_search_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_rx_scan_mode_start.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_search_channel_priority_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_search_waveform_set.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_stack_reset.c" />
+      <file file_name="../../../../../../../components/serialization/common/struct_ser/ant/ant_struct_serialization.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/serializers/ant_version_get.c" />
+      <file file_name="../../../../../../../components/serialization/application/codecs/ant/middleware/app_mw_ant.c" />
+      <file file_name="../../../../../../../components/serialization/common/ble_serialization.c" />
+      <file file_name="../../../../../../../components/serialization/common/cond_field_serialization.c" />
+      <file file_name="../../../../../../../components/serialization/application/hal/ser_app_hal_nrf5x.c" />
+      <file file_name="../../../../../../../components/serialization/application/hal/ser_app_power_system_off.c" />
+      <file file_name="../../../../../../../components/serialization/common/ser_dbg_sd_str.c" />
+      <file file_name="../../../../../../../components/serialization/common/transport/ser_hal_transport.c" />
+      <file file_name="../../../../../../../components/serialization/common/transport/ser_phy/ser_phy_uart.c" />
+      <file file_name="../../../../../../../components/serialization/application/transport/ser_sd_transport.c" />
+      <file file_name="../../../../../../../components/serialization/application/transport/ser_softdevice_handler.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_clock.c" />
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/hal/nrf_nvmc.c" />
+      <file file_name="../../../../../../../components/drivers_nrf/nrf_soc_nosd/nrf_soc.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_clock.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_power_clock.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_io_tx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/ses/ant_io_tx_pca10040_s212_uart.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/ses/ant_io_tx_pca10040_s212_uart.emSession
new file mode 100644
index 0000000..337c1e0
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/ses/ant_io_tx_pca10040_s212_uart.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_io_tx_pca10040_s212_uart" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/ses/flash_placement.xml
new file mode 100644
index 0000000..8083695
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_io_demo/ant_io_tx/pca10040/ser_s212_uart/ses/flash_placement.xml
@@ -0,0 +1,41 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_queue" inputsections="*(.nrf_queue*)" address_symbol="__start_nrf_queue" end_symbol="__stop_nrf_queue" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/ant_message_types_master.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/ant_message_types_master.c
new file mode 100644
index 0000000..e05e8b7
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/ant_message_types_master.c
@@ -0,0 +1,239 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2014
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#include "ant_message_types_master.h"
+#include <stdint.h>
+#include "string.h"
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "app_error.h"
+#include "boards.h"
+#include "sdk_config.h"
+#include "ant_channel_config.h"
+#include "nrf_delay.h"
+#include "nrf_sdh_ant.h"
+
+// I/O configuration
+#define LED_BROADCAST                   BSP_BOARD_LED_0
+#define LED_ACKNOWLEDGED                BSP_BOARD_LED_1
+#define LED_BURST                       BSP_BOARD_LED_2
+
+// Channel configuration.
+#define ANT_CUSTOM_TRANSMIT_POWER       0u      /**< ANT Custom Transmit Power (Invalid/Not Used). */
+#define BROADCAST_DATA_BUFFER_SIZE      8u      /**< Size of the broadcast data buffer. */
+#define BURST_BLOCK_SIZE                32u     /**< Size of data block transmitted via burst. Size must be divisible by 8. */
+
+#define APP_ANT_OBSERVER_PRIO           1       /**< Application's ANT observer priority. You shouldn't need to modify this value. */
+
+// Static variables and buffers.
+static uint8_t m_tx_buffer[BROADCAST_DATA_BUFFER_SIZE]; /**< Primary data (Broadcast/Acknowledged) transmit buffer. */
+static uint8_t m_counter = 1u;                               /**< Counter to increment the ANT broadcast data payload. */
+static uint8_t m_burst_data[BURST_BLOCK_SIZE];               /**< Burst data transmit buffer. */
+
+// State Machine
+enum MESSAGE_TYPES_MASTER_STATES
+{
+    BROADCAST,
+    ACKNOWLEDGED,
+    BURST
+} state_message_types;
+
+void ant_message_types_master_setup(void)
+{
+    uint32_t err_code;
+
+    ant_channel_config_t channel_config =
+    {
+        .channel_number    = ANT_CHANNEL_NUM,
+        .channel_type      = CHANNEL_TYPE_MASTER,
+        .ext_assign        = 0x00,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .device_number     = (uint16_t) (NRF_FICR->DEVICEID[0]),
+        .channel_period    = CHAN_PERIOD,
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    err_code = ant_channel_init(&channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    //Set Tx Power
+    err_code = sd_ant_channel_radio_tx_power_set(ANT_CHANNEL_NUM,
+                                                 RADIO_TX_POWER_LVL_3,
+                                                 ANT_CUSTOM_TRANSMIT_POWER);
+    APP_ERROR_CHECK(err_code);
+
+    // Open channel.
+    err_code = sd_ant_channel_open(ANT_CHANNEL_NUM);
+    APP_ERROR_CHECK(err_code);
+
+    // Write counter value to last byte of the broadcast data.
+    // The last byte is chosen to get the data more visible in the end of an printout
+    // on the recieving end.
+    memset(m_tx_buffer, 0, BROADCAST_DATA_BUFFER_SIZE);
+    m_tx_buffer[BROADCAST_DATA_BUFFER_SIZE - 1] = m_counter;
+
+    // Configure the initial payload of the broadcast data
+    err_code = sd_ant_broadcast_message_tx(ANT_CHANNEL_NUM,
+                                           BROADCAST_DATA_BUFFER_SIZE,
+                                           m_tx_buffer);
+    APP_ERROR_CHECK(err_code);
+
+    //Set state to broadcasting
+    state_message_types = BROADCAST;
+}
+
+
+void ant_message_types_master_bsp_evt_handler(bsp_event_t evt)
+{
+    switch (evt)
+    {
+        case BSP_EVENT_KEY_0:
+            state_message_types = BROADCAST;
+            break;
+
+        case BSP_EVENT_KEY_1:
+            state_message_types = ACKNOWLEDGED;
+            break;
+
+        case BSP_EVENT_KEY_2:
+            state_message_types = BURST;
+            break;
+
+        default:
+            break; // no implementation needed
+    }
+}
+
+/**@brief Function for handling a ANT stack event.
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+static void ant_evt_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    uint32_t err_code;
+    uint32_t led_output = LED_BROADCAST;
+
+    switch (p_ant_evt->event)
+    {
+        // ANT broadcast/Acknowledged/Burst Success
+        // Send the next message according to the current state and increment the counter.
+        case EVENT_TX:                      // Intentional fall through
+        case EVENT_TRANSFER_TX_COMPLETED:   // Intentional fall through
+        case EVENT_TRANSFER_TX_FAILED:
+            bsp_board_leds_off();
+            m_tx_buffer[BROADCAST_DATA_BUFFER_SIZE - 1] = m_counter;
+
+            if (state_message_types == BROADCAST)
+            {
+                // Send as broadcast
+                err_code = sd_ant_broadcast_message_tx(ANT_CHANNEL_NUM,
+                                                       BROADCAST_DATA_BUFFER_SIZE,
+                                                       m_tx_buffer);
+                APP_ERROR_CHECK(err_code);
+
+                led_output = LED_BROADCAST;
+            }
+            else if (state_message_types == ACKNOWLEDGED)
+            {
+                // Send as acknowledged
+                err_code = sd_ant_acknowledge_message_tx(ANT_CHANNEL_NUM,
+                                                         BROADCAST_DATA_BUFFER_SIZE,
+                                                         m_tx_buffer);
+                APP_ERROR_CHECK(err_code);
+
+                led_output = LED_ACKNOWLEDGED;
+            }
+            else if (state_message_types == BURST)
+            {
+                // If this is a new message, populate the burst buffer
+                // with new dummy data.  Otherwise, will retry sending the
+                // same content.
+                if (p_ant_evt->event != EVENT_TRANSFER_TX_FAILED)
+                {
+                    for (uint32_t i = 0; i < BURST_BLOCK_SIZE; i++)
+                    {
+                        m_burst_data[i] = m_counter;
+                        m_counter++;
+                    }
+                }
+
+                // Queue a Burst Transfer.  Since this is a small burst, queue entire burst.
+                err_code = sd_ant_burst_handler_request(ANT_CHANNEL_NUM,
+                                                        BURST_BLOCK_SIZE,
+                                                        m_burst_data,
+                                                        (BURST_SEGMENT_START | BURST_SEGMENT_END));
+                APP_ERROR_CHECK(err_code);
+
+                led_output = LED_BURST;
+            }
+            // Activate LED for 20ms
+            bsp_board_led_on(led_output);
+            nrf_delay_ms(20);
+            bsp_board_led_off(led_output);
+            m_counter++;
+            break;
+
+        case TRANSFER_IN_PROGRESS:              //Intentional fall through
+        case TRANSFER_SEQUENCE_NUMBER_ERROR:    //Intentional fall through
+        case TRANSFER_IN_ERROR:                 //Intentional fall through
+        case TRANSFER_BUSY:
+            // Ignore these events; will retry burst transfer when we get the EVENT_TRANSFER_TX_FAILED event.
+            break;
+
+        default:
+            break; // No implementation needed
+
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, APP_ANT_OBSERVER_PRIO, ant_evt_handler, NULL);
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/ant_message_types_master.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/ant_message_types_master.h
new file mode 100644
index 0000000..2960b8d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/ant_message_types_master.h
@@ -0,0 +1,75 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2014
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#ifndef ANT_MESSAGE_TYPES_MASTER_H__
+#define ANT_MESSAGE_TYPES_MASTER_H__
+
+#include "bsp.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@brief Function for configuring and starting ANT channel
+ *
+ */
+void ant_message_types_master_setup(void);
+
+/**@brief Handles BSP events.
+ *
+ * @param[in] evt   BSP event.
+ */
+void ant_message_types_master_bsp_evt_handler(bsp_event_t evt);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // ANT_MESSAGE_TYPES_H__
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/ant_message_types_master_test.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/ant_message_types_master_test.xml
new file mode 100644
index 0000000..f872d82
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/ant_message_types_master_test.xml
@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:2/9/2016 11:12:06 AM-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup />
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">0</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">34</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">35</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">36</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">37</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">38</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">39</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">40</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/ant_msg_types_master.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/ant_msg_types_master.eww
new file mode 100644
index 0000000..ebff9d0
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/ant_msg_types_master.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_msg_types_master_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_msg_types_master_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/arm4/ant_msg_types_master_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/arm4/ant_msg_types_master_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/arm4/ant_msg_types_master_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/arm4/ant_msg_types_master_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/arm4/ant_msg_types_master_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..1a8e47e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/arm4/ant_msg_types_master_d52_starterkit_s212.uvproj
@@ -0,0 +1,554 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_message_types_master.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_message_types_master.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/arm5_no_packs/ant_msg_types_master_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/arm5_no_packs/ant_msg_types_master_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/arm5_no_packs/ant_msg_types_master_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/arm5_no_packs/ant_msg_types_master_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/arm5_no_packs/ant_msg_types_master_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..13201d7
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/arm5_no_packs/ant_msg_types_master_d52_starterkit_s212.uvprojx
@@ -0,0 +1,578 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_message_types_master.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_message_types_master.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..82a0c6c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,186 @@
+PROJECT_NAME     := ant_msg_types_master_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_msg_types_master_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_message_types_master.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/armgcc/ant_msg_types_master_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/armgcc/ant_msg_types_master_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/armgcc/ant_msg_types_master_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..864671c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3922 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/iar/ant_msg_types_master_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/iar/ant_msg_types_master_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/iar/ant_msg_types_master_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/iar/ant_msg_types_master_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/iar/ant_msg_types_master_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..f652834
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/iar/ant_msg_types_master_d52_starterkit_s212.ewp
@@ -0,0 +1,1078 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_msg_types_master_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_msg_types_master_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_msg_types_master_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_message_types_master.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/iar/ant_msg_types_master_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/iar/ant_msg_types_master_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/iar/ant_msg_types_master_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/ses/ant_msg_types_master_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/ses/ant_msg_types_master_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..7adab83
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/ses/ant_msg_types_master_d52_starterkit_s212.emProject
@@ -0,0 +1,107 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_msg_types_master_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_msg_types_master_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_message_types_master.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/ses/ant_msg_types_master_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/ses/ant_msg_types_master_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..dbe5b17
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/ses/ant_msg_types_master_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_msg_types_master_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/main.c
new file mode 100644
index 0000000..0da187e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/main.c
@@ -0,0 +1,123 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#include <stdint.h>
+#include "nrf.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "bsp.h"
+#include "boards.h"
+#include "hardfault.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+#include "ant_message_types_master.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+/**@brief Function for the Timer and BSP initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                        ant_message_types_master_bsp_evt_handler);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for ANT stack initialization.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    ant_message_types_master_setup();
+
+    NRF_LOG_INFO("ANT Message Types example started.");
+
+    // Enter main loop.
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/arm4/ant_msg_types_master_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/arm4/ant_msg_types_master_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/arm4/ant_msg_types_master_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/arm4/ant_msg_types_master_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/arm4/ant_msg_types_master_pca10040_s212.uvproj
new file mode 100644
index 0000000..43a420b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/arm4/ant_msg_types_master_pca10040_s212.uvproj
@@ -0,0 +1,551 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_message_types_master.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_message_types_master.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/arm5_no_packs/ant_msg_types_master_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/arm5_no_packs/ant_msg_types_master_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/arm5_no_packs/ant_msg_types_master_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/arm5_no_packs/ant_msg_types_master_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/arm5_no_packs/ant_msg_types_master_pca10040_s212.uvprojx
new file mode 100644
index 0000000..b0ebde5
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/arm5_no_packs/ant_msg_types_master_pca10040_s212.uvprojx
@@ -0,0 +1,575 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_message_types_master.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_message_types_master.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..141c660
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,189 @@
+PROJECT_NAME     := ant_msg_types_master_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_msg_types_master_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_message_types_master.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/armgcc/ant_msg_types_master_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/armgcc/ant_msg_types_master_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/armgcc/ant_msg_types_master_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..9263b87
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3866 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/iar/ant_msg_types_master_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/iar/ant_msg_types_master_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/iar/ant_msg_types_master_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/iar/ant_msg_types_master_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/iar/ant_msg_types_master_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/iar/ant_msg_types_master_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/iar/ant_msg_types_master_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/iar/ant_msg_types_master_pca10040_s212.ewp
new file mode 100644
index 0000000..d520cf3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/iar/ant_msg_types_master_pca10040_s212.ewp
@@ -0,0 +1,1081 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_msg_types_master_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_msg_types_master_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_msg_types_master_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_message_types_master.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/ses/ant_msg_types_master_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/ses/ant_msg_types_master_pca10040_s212.emProject
new file mode 100644
index 0000000..2cdb8a7
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/ses/ant_msg_types_master_pca10040_s212.emProject
@@ -0,0 +1,106 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_msg_types_master_pca10040_s212" target="8" version="2">
+  <project Name="ant_msg_types_master_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_message_types_master.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/ses/ant_msg_types_master_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/ses/ant_msg_types_master_pca10040_s212.emSession
new file mode 100644
index 0000000..e163546
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/ses/ant_msg_types_master_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_msg_types_master_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_message_types/master/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/ant_multi_channels_rx.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/ant_multi_channels_rx.c
new file mode 100644
index 0000000..533d391
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/ant_multi_channels_rx.c
@@ -0,0 +1,204 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#include <stdint.h>
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "app_error.h"
+#include "boards.h"
+#include "sdk_config.h"
+#include "ant_channel_config.h"
+#include "ant_search_config.h"
+#include "ant_multi_channels_rx.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+
+
+#define APP_ANT_OBSERVER_PRIO   1   /**< Application's ANT observer priority. You shouldn't need to modify this value. */
+
+
+// Private variables
+static bool m_tracking_channels[NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED] = { false };     /**< Array to keep track of which channels are currently tracking */
+
+/**@brief Function to display the bottom nibble of the input byte on the board's LEDs
+ *
+ */
+static void ant_scaleable_display_byte_on_leds(uint8_t byte_to_display)
+{
+    bsp_board_leds_off();
+
+    if ((byte_to_display & 0x01) == 1)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_3);
+    }
+    if (((byte_to_display >> 1) & 0x01) == 1)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_2);
+    }
+    if (((byte_to_display >> 2) & 0x01) == 1)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_1);
+    }
+    if (((byte_to_display >> 3) & 0x01) == 1)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_0);
+    }
+}
+
+
+/**@brief Function for handling ANT GO_TO_SEARCH events
+ *
+ */
+static void goto_search_handler(uint8_t channel)
+{
+    m_tracking_channels[channel] = false;
+    ant_scaleable_display_num_tracking_channels();
+}
+
+
+/**@brief Function for handling ANT RX events
+ *
+ */
+static void message_received_handler(uint8_t ant_channel, ant_evt_t * p_ant_evt)
+{
+    switch (p_ant_evt->message.ANT_MESSAGE_ucMesgID)
+    {
+        // Broadcast data received
+        case MESG_BROADCAST_DATA_ID:
+            m_tracking_channels[ant_channel] = true;
+            ant_scaleable_display_num_tracking_channels();
+            break;
+
+        default:
+            break;
+    }
+}
+
+
+void ant_scaleable_display_num_tracking_channels()
+{
+    uint8_t  num_tracking_channels = 0;
+    uint32_t i;
+
+    for (i = 0; i < NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED; i++)
+    {
+        if (m_tracking_channels[i])
+        {
+            num_tracking_channels++;
+        }
+    }
+    ant_scaleable_display_byte_on_leds(num_tracking_channels);
+}
+
+
+void ant_scaleable_channel_rx_broadcast_setup(void)
+{
+    uint32_t err_code;
+    uint32_t i = 0;
+
+    ant_channel_config_t channel_config =
+    {
+        .channel_number     = i,
+        .channel_type       = CHANNEL_TYPE_SLAVE,
+        .ext_assign         = 0x00,
+        .rf_freq            = RF_FREQ,
+        .transmission_type  = CHAN_ID_TRANS_TYPE,
+        .device_type        = CHAN_ID_DEV_TYPE,
+        .device_number      = i + 1,
+        .channel_period     = CHAN_PERIOD,
+        .network_number     = ANT_NETWORK_NUM,
+    };
+
+    ant_search_config_t ant_search_config   = DEFAULT_ANT_SEARCH_CONFIG(i);
+    ant_search_config.high_priority_timeout = ANT_HIGH_PRIORITY_TIMEOUT_DISABLE;
+
+    for (i = 0; i < NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED; i++)
+    {
+        // Configure channel
+        channel_config.channel_number = i;
+        channel_config.device_number  = i + 1;
+
+        err_code = ant_channel_init(&channel_config);
+        APP_ERROR_CHECK(err_code);
+
+        // Set search timeout
+        ant_search_config.channel_number = i;
+        err_code = ant_search_init(&ant_search_config);
+        APP_ERROR_CHECK(err_code);
+
+        // Open channel
+        err_code = sd_ant_channel_open(i);
+        APP_ERROR_CHECK(err_code);
+    }
+}
+
+/**@brief Function for handling a ANT stack event.
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+void ant_evt_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    switch (p_ant_evt->event)
+    {
+        case EVENT_RX_FAIL_GO_TO_SEARCH:
+            goto_search_handler(p_ant_evt->channel);
+            break;
+
+        case EVENT_RX:
+            message_received_handler(p_ant_evt->channel, p_ant_evt);
+            break;
+
+        default:
+            break;
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, APP_ANT_OBSERVER_PRIO, ant_evt_handler, NULL);
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/ant_multi_channels_rx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/ant_multi_channels_rx.eww
new file mode 100644
index 0000000..3b0e8e0
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/ant_multi_channels_rx.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_multi_channels_rx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_multi_channels_rx_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/ant_multi_channels_rx.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/ant_multi_channels_rx.h
new file mode 100644
index 0000000..a842cf3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/ant_multi_channels_rx.h
@@ -0,0 +1,75 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#ifndef ANT_SCALEABLE_RX_H__
+#define ANT_SCALEABLE_RX_H__
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@brief Function to show the number of currently tracking channels as a binary number on the LEDs.
+ *
+ */
+void ant_scaleable_display_num_tracking_channels(void);
+
+/**@brief Function for setting up and opening channels to be ready for RX broadcast.
+ *
+ */
+void ant_scaleable_channel_rx_broadcast_setup(void);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // ANT_SCALEABLE_RX_H__
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/ant_multi_channels_rx_test.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/ant_multi_channels_rx_test.xml
new file mode 100644
index 0000000..37da9e9
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/ant_multi_channels_rx_test.xml
@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:3/15/2016 8:34:29 AM-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup />
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">1</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">2</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">3</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">4</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">5</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">6</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">7</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">8</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/arm4/ant_multi_channels_rx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/arm4/ant_multi_channels_rx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/arm4/ant_multi_channels_rx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/arm4/ant_multi_channels_rx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/arm4/ant_multi_channels_rx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..1c127eb
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/arm4/ant_multi_channels_rx_d52_starterkit_s212.uvproj
@@ -0,0 +1,557 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_multi_channels_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_multi_channels_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_rx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_rx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_rx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_rx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_rx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..4265028
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_rx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,581 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_multi_channels_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_multi_channels_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..d30a397
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,188 @@
+PROJECT_NAME     := ant_multi_channels_rx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_multi_channels_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_multi_channels_rx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/armgcc/ant_multi_channels_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/armgcc/ant_multi_channels_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/armgcc/ant_multi_channels_rx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..d53c898
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3938 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 15
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 64
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/iar/ant_multi_channels_rx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/iar/ant_multi_channels_rx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/iar/ant_multi_channels_rx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/iar/ant_multi_channels_rx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/iar/ant_multi_channels_rx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..0006b46
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/iar/ant_multi_channels_rx_d52_starterkit_s212.ewp
@@ -0,0 +1,1081 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_multi_channels_rx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_multi_channels_rx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_multi_channels_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_multi_channels_rx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/iar/ant_multi_channels_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/iar/ant_multi_channels_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/iar/ant_multi_channels_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/ses/ant_multi_channels_rx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/ses/ant_multi_channels_rx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..27dd734
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/ses/ant_multi_channels_rx_d52_starterkit_s212.emProject
@@ -0,0 +1,108 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_multi_channels_rx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_multi_channels_rx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/ant/ant_search_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_multi_channels_rx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/ses/ant_multi_channels_rx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/ses/ant_multi_channels_rx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..0340683
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/ses/ant_multi_channels_rx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_multi_channels_rx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/main.c
new file mode 100644
index 0000000..71d05b3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/main.c
@@ -0,0 +1,125 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/*
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdint.h>
+#include "nrf.h"
+#include "app_error.h"
+#include "boards.h"
+#include "hardfault.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+#include "ant_multi_channels_rx.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+/**@brief Function for the BSP and Power Manager initialization.
+ */
+static void utils_setup(void)
+{
+    bsp_board_init(BSP_INIT_LEDS);
+
+    ret_code_t err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for ANT stack initialization.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    ant_scaleable_display_num_tracking_channels();
+    ant_scaleable_channel_rx_broadcast_setup();
+
+    NRF_LOG_INFO("ANT Multi Channels RX example started.");
+
+    // Enter main loop
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/arm4/ant_multi_channels_rx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/arm4/ant_multi_channels_rx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/arm4/ant_multi_channels_rx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/arm4/ant_multi_channels_rx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/arm4/ant_multi_channels_rx_pca10040_s212.uvproj
new file mode 100644
index 0000000..3ab039d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/arm4/ant_multi_channels_rx_pca10040_s212.uvproj
@@ -0,0 +1,554 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_multi_channels_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_multi_channels_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/arm5_no_packs/ant_multi_channels_rx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/arm5_no_packs/ant_multi_channels_rx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/arm5_no_packs/ant_multi_channels_rx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/arm5_no_packs/ant_multi_channels_rx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/arm5_no_packs/ant_multi_channels_rx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..fc79c0c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/arm5_no_packs/ant_multi_channels_rx_pca10040_s212.uvprojx
@@ -0,0 +1,578 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_multi_channels_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_multi_channels_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..eeaab0f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,191 @@
+PROJECT_NAME     := ant_multi_channels_rx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_multi_channels_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_multi_channels_rx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/armgcc/ant_multi_channels_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/armgcc/ant_multi_channels_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/armgcc/ant_multi_channels_rx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..f295abe
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3882 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 15
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 64
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/iar/ant_multi_channels_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/iar/ant_multi_channels_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/iar/ant_multi_channels_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/iar/ant_multi_channels_rx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/iar/ant_multi_channels_rx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/iar/ant_multi_channels_rx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/iar/ant_multi_channels_rx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/iar/ant_multi_channels_rx_pca10040_s212.ewp
new file mode 100644
index 0000000..47da057
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/iar/ant_multi_channels_rx_pca10040_s212.ewp
@@ -0,0 +1,1084 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_multi_channels_rx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_multi_channels_rx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_multi_channels_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_multi_channels_rx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/ses/ant_multi_channels_rx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/ses/ant_multi_channels_rx_pca10040_s212.emProject
new file mode 100644
index 0000000..39a7107
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/ses/ant_multi_channels_rx_pca10040_s212.emProject
@@ -0,0 +1,107 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_multi_channels_rx_pca10040_s212" target="8" version="2">
+  <project Name="ant_multi_channels_rx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/ant/ant_search_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_multi_channels_rx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/ses/ant_multi_channels_rx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/ses/ant_multi_channels_rx_pca10040_s212.emSession
new file mode 100644
index 0000000..36a28c8
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/ses/ant_multi_channels_rx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_multi_channels_rx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/rx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/ant_multi_channels_tx.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/ant_multi_channels_tx.c
new file mode 100644
index 0000000..daaca73
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/ant_multi_channels_tx.c
@@ -0,0 +1,166 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#include <stdint.h>
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "app_error.h"
+#include "boards.h"
+#include "sdk_config.h"
+#include "ant_channel_config.h"
+#include "ant_multi_channels_tx.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+
+
+#define APP_ANT_OBSERVER_PRIO   1   /**< Application's ANT observer priority. You shouldn't need to modify this value. */
+
+
+// Private variables
+static uint8_t m_counter[NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED]  = {0};  /**< Counters to increment the ANT broadcast data payload. */
+static uint8_t m_broadcast_data[ANT_STANDARD_DATA_PAYLOAD_SIZE] = {0};  /**< Primary data transmit buffers. */
+static uint8_t m_num_open_channels                              = 0;    /**< Number of channels open */
+
+
+/**@brief Function to display the bottom nibble of the input byte */
+static void ant_scaleable_display_byte_on_leds(uint8_t byte_to_display)
+{
+    bsp_board_leds_off();
+
+    if ((byte_to_display & 0x01) == 1)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_3);
+    }
+    if (((byte_to_display >> 1) & 0x01) == 1)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_2);
+    }
+    if (((byte_to_display >> 2) & 0x01) == 1)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_1);
+    }
+    if (((byte_to_display >> 3) & 0x01) == 1)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_0);
+    }
+}
+
+
+void ant_scaleable_channel_tx_broadcast_setup(void)
+{
+    uint32_t err_code;
+    uint32_t i = 0;
+
+    ant_channel_config_t channel_config =
+    {
+        .channel_number     = i,
+        .channel_type       = CHANNEL_TYPE_MASTER,
+        .ext_assign         = 0x00,
+        .rf_freq            = RF_FREQ,
+        .transmission_type  = CHAN_ID_TRANS_TYPE,
+        .device_type        = CHAN_ID_DEV_TYPE,
+        .device_number      = i + 1,
+        .channel_period     = CHAN_PERIOD,
+        .network_number     = ANT_NETWORK_NUM,
+    };
+
+    for (i = 0; i < NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED; i++)
+    {
+        // Configure channel
+        channel_config.channel_number = i;
+        channel_config.device_number  = i + 1;
+
+        err_code = ant_channel_init(&channel_config);
+        APP_ERROR_CHECK(err_code);
+
+        // Open channel
+        err_code = sd_ant_channel_open(i);
+        APP_ERROR_CHECK(err_code);
+
+        m_num_open_channels++;
+        ant_scaleable_display_byte_on_leds(m_num_open_channels);
+    }
+}
+
+
+/**@brief Function for handling a ANT stack event.
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+void ant_evt_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    uint32_t err_code;
+
+    switch (p_ant_evt->event)
+    {
+        // ANT broadcast success.
+        // Increment the counter and send a new broadcast.
+        case EVENT_TX:
+            // Increment the counter.
+            m_counter[p_ant_evt->channel]++;
+
+            // Assign a new value to the broadcast data.
+            m_broadcast_data[ANT_STANDARD_DATA_PAYLOAD_SIZE - 1] = m_counter[p_ant_evt->channel];
+
+            // Broadcast the data.
+            err_code = sd_ant_broadcast_message_tx(p_ant_evt->channel,
+                                                   ANT_STANDARD_DATA_PAYLOAD_SIZE,
+                                                   m_broadcast_data);
+            APP_ERROR_CHECK(err_code);
+
+            break;
+
+        default:
+            break;
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, APP_ANT_OBSERVER_PRIO, ant_evt_handler, NULL);
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/ant_multi_channels_tx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/ant_multi_channels_tx.eww
new file mode 100644
index 0000000..9ec97ee
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/ant_multi_channels_tx.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_multi_channels_tx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_multi_channels_tx_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/ant_multi_channels_tx.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/ant_multi_channels_tx.h
new file mode 100644
index 0000000..377ce1b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/ant_multi_channels_tx.h
@@ -0,0 +1,69 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#ifndef ANT_SCALEABLE_TX_H__
+#define ANT_SCALEABLE_TX_H__
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@brief Function for setting up and opening channels to be ready for TX broadcast.
+ */
+void ant_scaleable_channel_tx_broadcast_setup(void);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // ANT_SCALEABLE_TX_H__
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/ant_multi_channels_tx_test.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/ant_multi_channels_tx_test.xml
new file mode 100644
index 0000000..a578e46
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/ant_multi_channels_tx_test.xml
@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:3/15/2016 8:35:08 AM-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup />
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">1</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">2</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">3</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">4</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">5</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">6</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">7</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">8</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/arm4/ant_multi_channels_tx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/arm4/ant_multi_channels_tx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/arm4/ant_multi_channels_tx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/arm4/ant_multi_channels_tx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/arm4/ant_multi_channels_tx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..9f13417
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/arm4/ant_multi_channels_tx_d52_starterkit_s212.uvproj
@@ -0,0 +1,554 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_multi_channels_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_multi_channels_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_tx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_tx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_tx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_tx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_tx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..eb2f130
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_tx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,578 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_multi_channels_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_multi_channels_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..da57336
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,186 @@
+PROJECT_NAME     := ant_multi_channels_tx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_multi_channels_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_multi_channels_tx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/armgcc/ant_multi_channels_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/armgcc/ant_multi_channels_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/armgcc/ant_multi_channels_tx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..5d44440
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3917 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 15
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 64
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/iar/ant_multi_channels_tx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/iar/ant_multi_channels_tx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/iar/ant_multi_channels_tx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/iar/ant_multi_channels_tx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/iar/ant_multi_channels_tx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..8d6ae65
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/iar/ant_multi_channels_tx_d52_starterkit_s212.ewp
@@ -0,0 +1,1078 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_multi_channels_tx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_multi_channels_tx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_multi_channels_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_multi_channels_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/iar/ant_multi_channels_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/iar/ant_multi_channels_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/iar/ant_multi_channels_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/ses/ant_multi_channels_tx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/ses/ant_multi_channels_tx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..5b55fda
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/ses/ant_multi_channels_tx_d52_starterkit_s212.emProject
@@ -0,0 +1,107 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_multi_channels_tx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_multi_channels_tx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_multi_channels_tx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/ses/ant_multi_channels_tx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/ses/ant_multi_channels_tx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..4e81697
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/ses/ant_multi_channels_tx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_multi_channels_tx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/main.c
new file mode 100644
index 0000000..9a119bf
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/main.c
@@ -0,0 +1,124 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/*
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdint.h>
+#include "nrf.h"
+#include "app_error.h"
+#include "boards.h"
+#include "hardfault.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+#include "ant_multi_channels_tx.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+/**@brief Function for the BSP and Power Manager initialization.
+ */
+static void utils_setup(void)
+{
+    bsp_board_init(BSP_INIT_LEDS);
+
+    ret_code_t err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for ANT stack initialization.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    ant_scaleable_channel_tx_broadcast_setup();
+
+    NRF_LOG_INFO("ANT Multi Channels TX example started.");
+
+    // Enter main loop
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/arm4/ant_multi_channels_tx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/arm4/ant_multi_channels_tx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/arm4/ant_multi_channels_tx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/arm4/ant_multi_channels_tx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/arm4/ant_multi_channels_tx_pca10040_s212.uvproj
new file mode 100644
index 0000000..a789af5
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/arm4/ant_multi_channels_tx_pca10040_s212.uvproj
@@ -0,0 +1,551 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_multi_channels_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_multi_channels_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/arm5_no_packs/ant_multi_channels_tx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/arm5_no_packs/ant_multi_channels_tx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/arm5_no_packs/ant_multi_channels_tx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/arm5_no_packs/ant_multi_channels_tx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/arm5_no_packs/ant_multi_channels_tx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..dd3a4d0
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/arm5_no_packs/ant_multi_channels_tx_pca10040_s212.uvprojx
@@ -0,0 +1,575 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_multi_channels_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_multi_channels_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..b57ba85
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,189 @@
+PROJECT_NAME     := ant_multi_channels_tx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_multi_channels_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_multi_channels_tx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/armgcc/ant_multi_channels_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/armgcc/ant_multi_channels_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/armgcc/ant_multi_channels_tx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..cc21fc3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3861 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 15
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 64
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/iar/ant_multi_channels_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/iar/ant_multi_channels_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/iar/ant_multi_channels_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/iar/ant_multi_channels_tx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/iar/ant_multi_channels_tx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/iar/ant_multi_channels_tx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/iar/ant_multi_channels_tx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/iar/ant_multi_channels_tx_pca10040_s212.ewp
new file mode 100644
index 0000000..d99f3e2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/iar/ant_multi_channels_tx_pca10040_s212.ewp
@@ -0,0 +1,1081 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_multi_channels_tx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_multi_channels_tx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_multi_channels_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_multi_channels_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/ses/ant_multi_channels_tx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/ses/ant_multi_channels_tx_pca10040_s212.emProject
new file mode 100644
index 0000000..6346a9c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/ses/ant_multi_channels_tx_pca10040_s212.emProject
@@ -0,0 +1,106 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_multi_channels_tx_pca10040_s212" target="8" version="2">
+  <project Name="ant_multi_channels_tx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_multi_channels_tx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/ses/ant_multi_channels_tx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/ses/ant_multi_channels_tx_pca10040_s212.emSession
new file mode 100644
index 0000000..5703441
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/ses/ant_multi_channels_tx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_multi_channels_tx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels/tx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/ant_multi_channels_encrypted_rx.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/ant_multi_channels_encrypted_rx.c
new file mode 100644
index 0000000..b09ba4c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/ant_multi_channels_encrypted_rx.c
@@ -0,0 +1,182 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "ant_multi_channels_encrypted_rx.h"
+#include "boards.h"
+#include "app_error.h"
+#include "ant_channel_config.h"
+#include "ant_search_config.h"
+#include "ant_encrypt_negotiation_slave.h"
+
+#define ANT_MSG_IDX_ID              1u                      /**< ANT message ID index. */
+
+/** Encryption key. */
+#define CRYPTO_KEY                  {0x03, 0x01, 0x04, 0x01, 0x05, 0x09, 0x02, 0x06, 0x05, 0x03, \
+                                     0x05, 0x08, 0x09, 0x07, 0x09, 0x03}
+
+/** Number of channels to open <1,ANT_CONFIG_TOTAL_CHANNELS_ALLOCATED>. */
+#define NUMBER_OF_CHANNELS_TO_OPEN  NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+
+
+/**@brief Function to display the bottom nibble of the input byte on the board's LEDs.
+ */
+static void low_nibble_on_leds_display(uint8_t byte_to_display)
+{
+    bsp_board_leds_off();
+
+    if ((byte_to_display & 0x01) == 1)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_3);
+    }
+    if (((byte_to_display >> 1) & 0x01) == 1)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_2);
+    }
+    if (((byte_to_display >> 2) & 0x01) == 1)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_1);
+    }
+    if (((byte_to_display >> 3) & 0x01) == 1)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_0);
+    }
+}
+
+
+void ant_se_num_of_decrypted_channels_display(void)
+{
+    uint8_t  num_decrypted_channels = 0;
+
+    for (uint32_t i = 0; i < NUMBER_OF_CHANNELS_TO_OPEN; i++)
+    {
+        if (ant_channel_encryp_tracking_state_get(i) == ANT_ENC_CHANNEL_STAT_TRACKING_DECRYPTED)
+        {
+            num_decrypted_channels++;
+        }
+    }
+    low_nibble_on_leds_display(num_decrypted_channels);
+}
+
+
+void ant_se_encryp_track_handler(uint8_t ant_channel, ant_encrypt_user_evt_t event)
+{
+    ant_se_num_of_decrypted_channels_display();
+}
+
+
+void ant_se_channel_rx_broadcast_setup(void)
+{
+    uint32_t err_code;
+
+    uint8_t crypto_key[] = CRYPTO_KEY;
+
+    ANT_ENCRYPT_STACK_SETTINGS_BASE_DEF(se_conf, crypto_key, (uint8_t *)NRF_FICR->DEVICEID);
+
+    ant_encrypt_channel_settings_t channel_crypto_settings =
+    {
+        .mode            = ENCRYPTION_BASIC_REQUEST_MODE,
+        .key_index       = 0,
+        .decimation_rate = 1
+    };
+
+    ant_channel_config_t m_channel_config =
+    {
+        .channel_type      = CHANNEL_TYPE_SLAVE,
+        .ext_assign        = 0x00,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .channel_period    = CHAN_PERIOD,
+        .network_number    = ANT_NETWORK_NUM,
+        .p_crypto_settings = &channel_crypto_settings
+        // .device_number and .channel_number structure members are set below separately.
+    };
+
+    ant_search_config_t m_search_config =
+    {
+        // .device_number structure member is set below separately.
+        .low_priority_timeout  = ANT_LOW_PRIORITY_TIMEOUT_DISABLE,
+        .high_priority_timeout = ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT,
+        .search_sharing_cycles = ANT_SEARCH_SHARING_CYCLES_DISABLE,
+        .search_priority       = ANT_SEARCH_PRIORITY_DEFAULT,
+        .waveform              = ANT_WAVEFORM_DEFAULT,
+    };
+
+
+    err_code = ant_stack_encryption_config(&ANT_ENCRYPT_STACK_SETTINGS_BASE(se_conf));
+    APP_ERROR_CHECK(err_code);
+
+    ant_enc_event_handler_register(ant_se_encryp_track_handler);
+
+    for (uint32_t i = 0; i < NUMBER_OF_CHANNELS_TO_OPEN; i++)
+    {
+        // fill variable channel ID.
+        m_channel_config.channel_number = i;
+        m_search_config.channel_number  = i;
+        m_channel_config.device_number  = i + 1;
+
+        err_code = ant_channel_init(&m_channel_config);
+        APP_ERROR_CHECK(err_code);
+
+        // Set search time-out
+        err_code = ant_search_init(&m_search_config);
+        APP_ERROR_CHECK(err_code);
+
+        // Open channel
+        err_code = sd_ant_channel_open(i);
+        APP_ERROR_CHECK(err_code);
+
+    }
+}
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/ant_multi_channels_encrypted_rx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/ant_multi_channels_encrypted_rx.eww
new file mode 100644
index 0000000..ad492ec
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/ant_multi_channels_encrypted_rx.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_multi_channels_encrypted_rx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_multi_channels_encrypted_rx_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/ant_multi_channels_encrypted_rx.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/ant_multi_channels_encrypted_rx.h
new file mode 100644
index 0000000..ea05545
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/ant_multi_channels_encrypted_rx.h
@@ -0,0 +1,86 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#ifndef ANT_MULTI_CHANNELS_ENCRYPTED_RX_H__
+#define ANT_MULTI_CHANNELS_ENCRYPTED_RX_H__
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/**
+ * @brief Function to show the number of currently tracking channels as a binary number on the LEDs.
+ */
+void ant_se_num_of_decrypted_channels_display(void);
+
+/**@brief Function for setting up the ANT module to be ready for RX broadcast.
+ *
+ * The following commands are issued in this order:
+ * - Enable the number of channels specified in NUMBER_OF_CHANNELS_TO_OPEN
+ * - Set up encryption
+ * - Loop through the channels and perform the following commands on each channel:
+ *      - Assign channel
+ *      - Set channel period
+ *      - Set RF frequency
+ *      - Set channel ID
+ *      - Open channel
+ */
+void ant_se_channel_rx_broadcast_setup(void);
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // ANT_MULTI_CHANNELS_ENCRYPTED_RX_H__
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/arm4/ant_multi_channels_encrypted_rx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/arm4/ant_multi_channels_encrypted_rx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/arm4/ant_multi_channels_encrypted_rx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/arm4/ant_multi_channels_encrypted_rx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/arm4/ant_multi_channels_encrypted_rx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..ca12cd0
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/arm4/ant_multi_channels_encrypted_rx_d52_starterkit_s212.uvproj
@@ -0,0 +1,563 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_encryption;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_encryption;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_multi_channels_encrypted_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_multi_channels_encrypted_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_encrypt_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_encryption\ant_encrypt_config.c</FilePath>            </File>            <File>
+              <FileName>ant_encrypt_negotiation_slave.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_encryption\ant_encrypt_negotiation_slave.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_encrypted_rx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_encrypted_rx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_encrypted_rx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_encrypted_rx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_encrypted_rx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..7bb52dc
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_encrypted_rx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,587 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_encryption;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_encryption;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_multi_channels_encrypted_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_multi_channels_encrypted_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_encrypt_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_encryption\ant_encrypt_config.c</FilePath>            </File>            <File>
+              <FileName>ant_encrypt_negotiation_slave.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_encryption\ant_encrypt_negotiation_slave.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..95b9076
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,191 @@
+PROJECT_NAME     := ant_multi_channels_encrypted_rx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_multi_channels_encrypted_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_encryption/ant_encrypt_config.c \
+  $(SDK_ROOT)/components/ant/ant_encryption/ant_encrypt_negotiation_slave.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_multi_channels_encrypted_rx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/ant/ant_encryption \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/armgcc/ant_multi_channels_encrypted_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/armgcc/ant_multi_channels_encrypted_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/armgcc/ant_multi_channels_encrypted_rx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..bb7d919
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3952 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 76
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <q> ANT_ENCRYPT_CONFIG_ENABLED  - ant_encrypt_config - Cryptographic ANT stack configuration
+ 
+
+#ifndef ANT_ENCRYPT_CONFIG_ENABLED
+#define ANT_ENCRYPT_CONFIG_ENABLED 1
+#endif
+
+// <q> ANT_ENCRYPT_NEGOTIATION_SLAVE_ENABLED  - ant_encrypt_negotiation_slave - Encryption negotiation for encrypted ANT slave channels
+ 
+
+#ifndef ANT_ENCRYPT_NEGOTIATION_SLAVE_ENABLED
+#define ANT_ENCRYPT_NEGOTIATION_SLAVE_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 15
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 15
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 64
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/iar/ant_multi_channels_encrypted_rx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/iar/ant_multi_channels_encrypted_rx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/iar/ant_multi_channels_encrypted_rx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/iar/ant_multi_channels_encrypted_rx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/iar/ant_multi_channels_encrypted_rx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..af41e20
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/iar/ant_multi_channels_encrypted_rx_d52_starterkit_s212.ewp
@@ -0,0 +1,1085 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_encryption</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_encryption</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_multi_channels_encrypted_rx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_multi_channels_encrypted_rx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_multi_channels_encrypted_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_encryption\ant_encrypt_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_encryption\ant_encrypt_negotiation_slave.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_multi_channels_encrypted_rx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/iar/ant_multi_channels_encrypted_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/iar/ant_multi_channels_encrypted_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/iar/ant_multi_channels_encrypted_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/ses/ant_multi_channels_encrypted_rx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/ses/ant_multi_channels_encrypted_rx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..0738d9d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/ses/ant_multi_channels_encrypted_rx_d52_starterkit_s212.emProject
@@ -0,0 +1,110 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_multi_channels_encrypted_rx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_multi_channels_encrypted_rx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/ant/ant_encryption;../../../../../../../components/ant/ant_search_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../components/ant/ant_encryption/ant_encrypt_config.c" />
+      <file file_name="../../../../../../../components/ant/ant_encryption/ant_encrypt_negotiation_slave.c" />
+      <file file_name="../../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_multi_channels_encrypted_rx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/ses/ant_multi_channels_encrypted_rx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/ses/ant_multi_channels_encrypted_rx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..167f00f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/ses/ant_multi_channels_encrypted_rx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_multi_channels_encrypted_rx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/main.c
new file mode 100644
index 0000000..0e9501a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/main.c
@@ -0,0 +1,134 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/*
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdint.h>
+#include "app_error.h"
+#include "boards.h"
+#include "hardfault.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+#include "ant_multi_channels_encrypted_rx.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+/**@brief Function for ANT stack initialization.
+ *
+ * @details Initializes the SoftDevice and the ANT event interrupt.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**
+ * @brief Function for setup thinks not directly related to ANT processing
+ *
+ * Initialize LEDs
+ */
+static void utils_setup(void)
+{
+    bsp_board_init(BSP_INIT_LEDS);
+
+    ret_code_t err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    softdevice_setup();
+    utils_setup();
+    ant_se_num_of_decrypted_channels_display();
+    ant_se_channel_rx_broadcast_setup();
+
+    NRF_LOG_INFO("ANT Multi Channels Encrypted RX example started.");
+
+    // Main loop.
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/arm4/ant_multi_channels_encrypted_rx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/arm4/ant_multi_channels_encrypted_rx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/arm4/ant_multi_channels_encrypted_rx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/arm4/ant_multi_channels_encrypted_rx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/arm4/ant_multi_channels_encrypted_rx_pca10040_s212.uvproj
new file mode 100644
index 0000000..2a22a00
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/arm4/ant_multi_channels_encrypted_rx_pca10040_s212.uvproj
@@ -0,0 +1,560 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_encryption;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_encryption;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_multi_channels_encrypted_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_multi_channels_encrypted_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_encrypt_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_encryption\ant_encrypt_config.c</FilePath>            </File>            <File>
+              <FileName>ant_encrypt_negotiation_slave.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_encryption\ant_encrypt_negotiation_slave.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/arm5_no_packs/ant_multi_channels_encrypted_rx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/arm5_no_packs/ant_multi_channels_encrypted_rx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/arm5_no_packs/ant_multi_channels_encrypted_rx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/arm5_no_packs/ant_multi_channels_encrypted_rx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/arm5_no_packs/ant_multi_channels_encrypted_rx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..a86d491
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/arm5_no_packs/ant_multi_channels_encrypted_rx_pca10040_s212.uvprojx
@@ -0,0 +1,584 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_encryption;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_encryption;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_multi_channels_encrypted_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_multi_channels_encrypted_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_encrypt_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_encryption\ant_encrypt_config.c</FilePath>            </File>            <File>
+              <FileName>ant_encrypt_negotiation_slave.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_encryption\ant_encrypt_negotiation_slave.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..408a055
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,194 @@
+PROJECT_NAME     := ant_multi_channels_encrypted_rx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_multi_channels_encrypted_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_encryption/ant_encrypt_config.c \
+  $(SDK_ROOT)/components/ant/ant_encryption/ant_encrypt_negotiation_slave.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_multi_channels_encrypted_rx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/ant/ant_encryption \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/armgcc/ant_multi_channels_encrypted_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/armgcc/ant_multi_channels_encrypted_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/armgcc/ant_multi_channels_encrypted_rx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..9fa2271
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3896 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 76
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <q> ANT_ENCRYPT_CONFIG_ENABLED  - ant_encrypt_config - Cryptographic ANT stack configuration
+ 
+
+#ifndef ANT_ENCRYPT_CONFIG_ENABLED
+#define ANT_ENCRYPT_CONFIG_ENABLED 1
+#endif
+
+// <q> ANT_ENCRYPT_NEGOTIATION_SLAVE_ENABLED  - ant_encrypt_negotiation_slave - Encryption negotiation for encrypted ANT slave channels
+ 
+
+#ifndef ANT_ENCRYPT_NEGOTIATION_SLAVE_ENABLED
+#define ANT_ENCRYPT_NEGOTIATION_SLAVE_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 15
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 15
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 64
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/iar/ant_multi_channels_encrypted_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/iar/ant_multi_channels_encrypted_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/iar/ant_multi_channels_encrypted_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/iar/ant_multi_channels_encrypted_rx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/iar/ant_multi_channels_encrypted_rx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/iar/ant_multi_channels_encrypted_rx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/iar/ant_multi_channels_encrypted_rx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/iar/ant_multi_channels_encrypted_rx_pca10040_s212.ewp
new file mode 100644
index 0000000..3b8036d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/iar/ant_multi_channels_encrypted_rx_pca10040_s212.ewp
@@ -0,0 +1,1088 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_encryption</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_encryption</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_multi_channels_encrypted_rx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_multi_channels_encrypted_rx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_multi_channels_encrypted_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_encryption\ant_encrypt_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_encryption\ant_encrypt_negotiation_slave.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_multi_channels_encrypted_rx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/ses/ant_multi_channels_encrypted_rx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/ses/ant_multi_channels_encrypted_rx_pca10040_s212.emProject
new file mode 100644
index 0000000..b732d5c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/ses/ant_multi_channels_encrypted_rx_pca10040_s212.emProject
@@ -0,0 +1,109 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_multi_channels_encrypted_rx_pca10040_s212" target="8" version="2">
+  <project Name="ant_multi_channels_encrypted_rx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/ant/ant_encryption;../../../../../../../components/ant/ant_search_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../components/ant/ant_encryption/ant_encrypt_config.c" />
+      <file file_name="../../../../../../../components/ant/ant_encryption/ant_encrypt_negotiation_slave.c" />
+      <file file_name="../../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_multi_channels_encrypted_rx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/ses/ant_multi_channels_encrypted_rx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/ses/ant_multi_channels_encrypted_rx_pca10040_s212.emSession
new file mode 100644
index 0000000..c5545d0
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/ses/ant_multi_channels_encrypted_rx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_multi_channels_encrypted_rx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/rx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/ant_multi_channels_encrypted_tx.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/ant_multi_channels_encrypted_tx.c
new file mode 100644
index 0000000..b8c9f44
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/ant_multi_channels_encrypted_tx.c
@@ -0,0 +1,194 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#include <stdint.h>
+#include <stdlib.h>
+#include "app_error.h"
+#include "boards.h"
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "ant_multi_channels_encrypted_tx.h"
+#include "ant_channel_config.h"
+#include "ant_encrypt_config.h"
+#include "sdk_config.h"
+#include "nrf_sdh_ant.h"
+
+/** Size of the broadcast data buffer. */
+#define BROADCAST_DATA_BUFFER_SIZE  ANT_STANDARD_DATA_PAYLOAD_SIZE
+
+/** Encryption key. */
+#define CRYPTO_KEY                 {0x03, 0x01, 0x04, 0x01, 0x05, 0x09, 0x02, 0x06, 0x05, 0x03, \
+                                    0x05, 0x08, 0x09, 0x07, 0x09, 0x03}
+
+/** Number of channels to open <1,NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED>. */
+#define NUMBER_OF_CHANNELS_TO_OPEN NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+
+/** Application's ANT observer priority. You shouldn't need to modify this value. */
+#define APP_ANT_OBSERVER_PRIO      1
+
+// Private variables.
+/** Counters to increment the ANT broadcast data payload. */
+static uint8_t m_counter[NUMBER_OF_CHANNELS_TO_OPEN] = { 0u };
+
+/** Primary data transmit buffers. */
+static uint8_t m_broadcast_data[BROADCAST_DATA_BUFFER_SIZE] = { 0 };
+
+/** Number of channels open. */
+static uint8_t m_num_open_channels = 0;
+
+/**@brief Function to display the bottom nibble of the input byte.
+ */
+static void low_nibble_on_leds_display(uint8_t byte_to_display)
+{
+    bsp_board_leds_off();
+
+    if ((byte_to_display & 0x01) == 1)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_3);
+    }
+    if (((byte_to_display >> 1) & 0x01) == 1)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_2);
+    }
+    if (((byte_to_display >> 2) & 0x01) == 1)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_1);
+    }
+    if (((byte_to_display >> 3) & 0x01) == 1)
+    {
+        bsp_board_led_on(BSP_BOARD_LED_0);
+    }
+}
+
+
+void ant_multi_channels_encrypted_channel_tx_broadcast_setup(void)
+{
+    uint32_t err_code;
+    uint32_t i;
+
+    uint8_t crypto_key[] = CRYPTO_KEY;
+
+    ANT_ENCRYPT_STACK_SETTINGS_BASE_DEF(se_conf, crypto_key, (uint8_t *)NRF_FICR->DEVICEID);
+
+    ant_encrypt_channel_settings_t channel_crypto_settings =
+    {
+        .mode            = ENCRYPTION_BASIC_REQUEST_MODE,
+        .key_index       = 0,
+        .decimation_rate = 1
+    };
+
+    ant_channel_config_t m_channel_config =
+    {
+        .channel_type      = CHANNEL_TYPE_MASTER,
+        .ext_assign        = 0x00,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .channel_period    = CHAN_PERIOD,
+        .network_number    = ANT_NETWORK_NUM,
+        .p_crypto_settings = &channel_crypto_settings
+        // .device_number and .channel_number structure members are set below separately.
+    };
+
+    err_code = ant_stack_encryption_config(&ANT_ENCRYPT_STACK_SETTINGS_BASE(se_conf));
+    APP_ERROR_CHECK(err_code);
+
+    for (i = 0; i < NUMBER_OF_CHANNELS_TO_OPEN; i++)
+    {
+        // Fill variable channel ID.
+        m_channel_config.channel_number = i;
+        m_channel_config.device_number  = i + 1;
+
+        err_code = ant_channel_init(&m_channel_config);
+        APP_ERROR_CHECK(err_code);
+
+        // Open channel.
+        err_code = sd_ant_channel_open(i);
+        APP_ERROR_CHECK(err_code);
+
+        m_num_open_channels++;
+    }
+
+    low_nibble_on_leds_display(m_num_open_channels);
+}
+
+/**@brief Function for handling a ANT stack event.
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+static void ant_evt_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    uint32_t err_code;
+
+    switch (p_ant_evt->event)
+    {
+        // ANT broadcast success.
+        // Increment the counter and send a new broadcast.
+        case EVENT_TX:
+            // Increment the counter.
+            m_counter[p_ant_evt->channel]++;
+
+            // Assign a new value to the broadcast data.
+            m_broadcast_data[BROADCAST_DATA_BUFFER_SIZE - 1] = m_counter[p_ant_evt->channel];
+
+            // Broadcast the data.
+            err_code = sd_ant_broadcast_message_tx(p_ant_evt->channel,
+                                                   BROADCAST_DATA_BUFFER_SIZE,
+                                                   m_broadcast_data);
+            APP_ERROR_CHECK(err_code);
+            break;
+
+        default:
+            break;
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, APP_ANT_OBSERVER_PRIO, ant_evt_handler, NULL);
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/ant_multi_channels_encrypted_tx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/ant_multi_channels_encrypted_tx.eww
new file mode 100644
index 0000000..1f748fd
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/ant_multi_channels_encrypted_tx.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_multi_channels_encrypted_tx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_multi_channels_encrypted_tx_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/ant_multi_channels_encrypted_tx.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/ant_multi_channels_encrypted_tx.h
new file mode 100644
index 0000000..4491a7a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/ant_multi_channels_encrypted_tx.h
@@ -0,0 +1,80 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#ifndef ANT_MULTI_CHANNELS_ENCRYPTED_TX_H__
+#define ANT_MULTI_CHANNELS_ENCRYPTED_TX_H__
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@brief Function for setting up the ANT module to be ready for TX broadcast.
+ *
+ * The following commands are issued in this order:
+ * - Enable the number of channels specified in NUMBER_OF_CHANNELS_TO_OPEN
+ * - Set up encryption
+ * - Loop through the channels and perform the following commands on each channel:
+ *      - Assign channel
+ *      - Enable encryption on this channel
+ *      - Set channel period
+ *      - Set RF frequency
+ *      - Set channel ID
+ *      - Open channel
+ */
+void ant_multi_channels_encrypted_channel_tx_broadcast_setup(void);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // ANT_MULTI_CHANNELS_ENCRYPTED_TX_H__
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/ant_multi_channels_encrypted_tx_test.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/ant_multi_channels_encrypted_tx_test.xml
new file mode 100644
index 0000000..1410672
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/ant_multi_channels_encrypted_tx_test.xml
@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:3/15/2016 1:29:36 PM-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup />
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">1</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">76</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">2</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">76</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">3</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">76</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">4</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">76</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">5</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">76</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">6</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">76</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">7</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">76</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">8</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">76</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/arm4/ant_multi_channels_encrypted_tx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/arm4/ant_multi_channels_encrypted_tx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/arm4/ant_multi_channels_encrypted_tx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/arm4/ant_multi_channels_encrypted_tx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/arm4/ant_multi_channels_encrypted_tx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..003f54a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/arm4/ant_multi_channels_encrypted_tx_d52_starterkit_s212.uvproj
@@ -0,0 +1,557 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_encryption;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_encryption;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_multi_channels_encrypted_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_multi_channels_encrypted_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_encrypt_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_encryption\ant_encrypt_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_encrypted_tx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_encrypted_tx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_encrypted_tx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_encrypted_tx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_encrypted_tx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..ca69ff2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/arm5_no_packs/ant_multi_channels_encrypted_tx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,581 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_encryption;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_encryption;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_multi_channels_encrypted_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_multi_channels_encrypted_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_encrypt_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_encryption\ant_encrypt_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..33ad270
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,188 @@
+PROJECT_NAME     := ant_multi_channels_encrypted_tx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_multi_channels_encrypted_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_encryption/ant_encrypt_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_multi_channels_encrypted_tx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/ant/ant_encryption \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/armgcc/ant_multi_channels_encrypted_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/armgcc/ant_multi_channels_encrypted_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/armgcc/ant_multi_channels_encrypted_tx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..d51dc1f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3924 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 76
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <q> ANT_ENCRYPT_CONFIG_ENABLED  - ant_encrypt_config - Cryptographic ANT stack configuration
+ 
+
+#ifndef ANT_ENCRYPT_CONFIG_ENABLED
+#define ANT_ENCRYPT_CONFIG_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 15
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 15
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 64
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/iar/ant_multi_channels_encrypted_tx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/iar/ant_multi_channels_encrypted_tx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/iar/ant_multi_channels_encrypted_tx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/iar/ant_multi_channels_encrypted_tx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/iar/ant_multi_channels_encrypted_tx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..2ad1043
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/iar/ant_multi_channels_encrypted_tx_d52_starterkit_s212.ewp
@@ -0,0 +1,1081 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_encryption</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_encryption</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_multi_channels_encrypted_tx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_multi_channels_encrypted_tx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_multi_channels_encrypted_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_encryption\ant_encrypt_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_multi_channels_encrypted_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/iar/ant_multi_channels_encrypted_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/iar/ant_multi_channels_encrypted_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/iar/ant_multi_channels_encrypted_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/ses/ant_multi_channels_encrypted_tx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/ses/ant_multi_channels_encrypted_tx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..898c7d1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/ses/ant_multi_channels_encrypted_tx_d52_starterkit_s212.emProject
@@ -0,0 +1,108 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_multi_channels_encrypted_tx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_multi_channels_encrypted_tx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/ant/ant_encryption;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../components/ant/ant_encryption/ant_encrypt_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_multi_channels_encrypted_tx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/ses/ant_multi_channels_encrypted_tx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/ses/ant_multi_channels_encrypted_tx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..a607cb5
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/ses/ant_multi_channels_encrypted_tx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_multi_channels_encrypted_tx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/main.c
new file mode 100644
index 0000000..368cba2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/main.c
@@ -0,0 +1,126 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/*
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdint.h>
+#include "app_error.h"
+#include "boards.h"
+#include "hardfault.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+#include "ant_multi_channels_encrypted_tx.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+/**@brief Function for ANT stack initialization.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**
+ * @brief Function for setup thinks not directly related to ANT processing
+ *
+ * Initialize LEDs
+ */
+static void utils_setup(void)
+{
+    bsp_board_init(BSP_INIT_LEDS);
+
+    ret_code_t err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    ant_multi_channels_encrypted_channel_tx_broadcast_setup();
+
+    NRF_LOG_INFO("ANT Multi Channels Encrypted TX example started.");
+
+    // Main loop.
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/arm4/ant_multi_channels_encrypted_tx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/arm4/ant_multi_channels_encrypted_tx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/arm4/ant_multi_channels_encrypted_tx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/arm4/ant_multi_channels_encrypted_tx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/arm4/ant_multi_channels_encrypted_tx_pca10040_s212.uvproj
new file mode 100644
index 0000000..171a5bf
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/arm4/ant_multi_channels_encrypted_tx_pca10040_s212.uvproj
@@ -0,0 +1,554 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_encryption;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_encryption;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_multi_channels_encrypted_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_multi_channels_encrypted_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_encrypt_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_encryption\ant_encrypt_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/arm5_no_packs/ant_multi_channels_encrypted_tx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/arm5_no_packs/ant_multi_channels_encrypted_tx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/arm5_no_packs/ant_multi_channels_encrypted_tx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/arm5_no_packs/ant_multi_channels_encrypted_tx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/arm5_no_packs/ant_multi_channels_encrypted_tx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..3e989fc
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/arm5_no_packs/ant_multi_channels_encrypted_tx_pca10040_s212.uvprojx
@@ -0,0 +1,578 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_encryption;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_encryption;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_multi_channels_encrypted_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_multi_channels_encrypted_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_encrypt_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_encryption\ant_encrypt_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..0904d55
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,191 @@
+PROJECT_NAME     := ant_multi_channels_encrypted_tx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_multi_channels_encrypted_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_encryption/ant_encrypt_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_multi_channels_encrypted_tx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/ant/ant_encryption \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/util \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/armgcc/ant_multi_channels_encrypted_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/armgcc/ant_multi_channels_encrypted_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/armgcc/ant_multi_channels_encrypted_tx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..b19d6cf
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3868 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 76
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <q> ANT_ENCRYPT_CONFIG_ENABLED  - ant_encrypt_config - Cryptographic ANT stack configuration
+ 
+
+#ifndef ANT_ENCRYPT_CONFIG_ENABLED
+#define ANT_ENCRYPT_CONFIG_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 15
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 15
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 64
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/iar/ant_multi_channels_encrypted_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/iar/ant_multi_channels_encrypted_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/iar/ant_multi_channels_encrypted_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/iar/ant_multi_channels_encrypted_tx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/iar/ant_multi_channels_encrypted_tx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/iar/ant_multi_channels_encrypted_tx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/iar/ant_multi_channels_encrypted_tx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/iar/ant_multi_channels_encrypted_tx_pca10040_s212.ewp
new file mode 100644
index 0000000..a29b9a8
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/iar/ant_multi_channels_encrypted_tx_pca10040_s212.ewp
@@ -0,0 +1,1084 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_encryption</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_encryption</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_multi_channels_encrypted_tx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_multi_channels_encrypted_tx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_multi_channels_encrypted_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_encryption\ant_encrypt_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_multi_channels_encrypted_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/ses/ant_multi_channels_encrypted_tx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/ses/ant_multi_channels_encrypted_tx_pca10040_s212.emProject
new file mode 100644
index 0000000..d161e4a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/ses/ant_multi_channels_encrypted_tx_pca10040_s212.emProject
@@ -0,0 +1,107 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_multi_channels_encrypted_tx_pca10040_s212" target="8" version="2">
+  <project Name="ant_multi_channels_encrypted_tx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/ant/ant_encryption;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../components/ant/ant_encryption/ant_encrypt_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_multi_channels_encrypted_tx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/ses/ant_multi_channels_encrypted_tx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/ses/ant_multi_channels_encrypted_tx_pca10040_s212.emSession
new file mode 100644
index 0000000..4b41165
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/ses/ant_multi_channels_encrypted_tx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_multi_channels_encrypted_tx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_multi_channels_encrypted/tx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/ant_bpwr_rx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/ant_bpwr_rx.eww
new file mode 100644
index 0000000..77aa8f2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/ant_bpwr_rx.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_bpwr_rx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_bpwr_rx_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/arm4/ant_bpwr_rx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/arm4/ant_bpwr_rx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/arm4/ant_bpwr_rx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/arm4/ant_bpwr_rx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/arm4/ant_bpwr_rx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..997f85b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/arm4/ant_bpwr_rx_d52_starterkit_s212.uvproj
@@ -0,0 +1,593 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>            <File>
+              <FileName>bsp_btn_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_bpwr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\ant_bpwr.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_common_data.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_common_data.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_16.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_16.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_17.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_17.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_18.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_18.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_torque.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_torque.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator\ant_bpwr_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_80.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_81.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/arm5_no_packs/ant_bpwr_rx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/arm5_no_packs/ant_bpwr_rx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/arm5_no_packs/ant_bpwr_rx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/arm5_no_packs/ant_bpwr_rx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/arm5_no_packs/ant_bpwr_rx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..1acf460
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/arm5_no_packs/ant_bpwr_rx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,617 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>            <File>
+              <FileName>bsp_btn_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_bpwr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\ant_bpwr.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_common_data.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_common_data.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_16.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_16.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_17.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_17.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_18.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_18.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_torque.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_torque.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator\ant_bpwr_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_80.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_81.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..24e34f8
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,210 @@
+PROJECT_NAME     := ant_bpwr_rx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_bpwr_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/components/libraries/sensorsim/sensorsim.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/ant_bpwr.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_common_data.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_1.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_16.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_17.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_18.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_torque.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/simulator/ant_bpwr_simulator.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_80.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_81.c \
+  $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \
+  $(SDK_ROOT)/components/ant/ant_state_indicator/ant_state_indicator.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp_btn_ant.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/simulator \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/ant/ant_key_manager \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  ../config \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/utils \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr \
+  $(SDK_ROOT)/components/ant/ant_state_indicator \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/ant/ant_key_manager/config \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/sensorsim \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/armgcc/ant_bpwr_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/armgcc/ant_bpwr_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..1b5cea2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/armgcc/ant_bpwr_rx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..59ffc68
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,4295 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANTPLUS_NETWORK_NUM - ANT PLUS network number. 
+#ifndef ANTPLUS_NETWORK_NUM
+#define ANTPLUS_NETWORK_NUM 0
+#endif
+
+// <o> APP_SHUTDOWN_HANDLER_PRIORITY - Application shutdown observer priority. 
+#ifndef APP_SHUTDOWN_HANDLER_PRIORITY
+#define APP_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// <o> BPWR_CHANNEL_NUM - Channel number assigned to BPWR profile. 
+#ifndef BPWR_CHANNEL_NUM
+#define BPWR_CHANNEL_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 0
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Board Support 
+
+//==========================================================
+// <e> BSP_BTN_ANT_ENABLED - bsp_btn_ant - Button Control for ANT
+//==========================================================
+#ifndef BSP_BTN_ANT_ENABLED
+#define BSP_BTN_ANT_ENABLED 1
+#endif
+// <o> BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID - Wakeup button ID. 
+#ifndef BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID
+#define BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID 3
+#endif
+
+// <o> BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID - Sleep button ID. 
+#ifndef BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID
+#define BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID 3
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <e> ANT_BPWR_ENABLED - ant_bpwr - Bicycle Power Profile
+//==========================================================
+#ifndef ANT_BPWR_ENABLED
+#define ANT_BPWR_ENABLED 1
+#endif
+// <e> ANT_BPWR_LOG_ENABLED - Enables general logging in the module.
+//==========================================================
+#ifndef ANT_BPWR_LOG_ENABLED
+#define ANT_BPWR_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_LOG_LEVEL
+#define ANT_BPWR_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_INFO_COLOR
+#define ANT_BPWR_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_COMMON_LOG_ENABLED - Enables logging of BPWR tracing common data.
+//==========================================================
+#ifndef ANT_BPWR_COMMON_LOG_ENABLED
+#define ANT_BPWR_COMMON_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_COMMON_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_COMMON_LOG_LEVEL
+#define ANT_BPWR_COMMON_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_COMMON_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_COMMON_INFO_COLOR
+#define ANT_BPWR_COMMON_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_TORQUE_LOG_ENABLED - Enables logging of BPWR torque page in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_TORQUE_LOG_ENABLED
+#define ANT_BPWR_PAGE_TORQUE_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_TORQUE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_TORQUE_LOG_LEVEL
+#define ANT_BPWR_PAGE_TORQUE_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_TORQUE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_TORQUE_INFO_COLOR
+#define ANT_BPWR_PAGE_TORQUE_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_1_LOG_ENABLED - Enables logging of BPWR page 1 in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_1_LOG_ENABLED
+#define ANT_BPWR_PAGE_1_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_1_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_1_LOG_LEVEL
+#define ANT_BPWR_PAGE_1_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_1_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_1_INFO_COLOR
+#define ANT_BPWR_PAGE_1_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_16_LOG_ENABLED - Enables logging of BPWR page 16 in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_16_LOG_ENABLED
+#define ANT_BPWR_PAGE_16_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_16_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_16_LOG_LEVEL
+#define ANT_BPWR_PAGE_16_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_16_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_16_INFO_COLOR
+#define ANT_BPWR_PAGE_16_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_17_LOG_ENABLED - Enables logging of BPWR page 17 in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_17_LOG_ENABLED
+#define ANT_BPWR_PAGE_17_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_17_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_17_LOG_LEVEL
+#define ANT_BPWR_PAGE_17_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_17_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_17_INFO_COLOR
+#define ANT_BPWR_PAGE_17_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_18_LOG_ENABLED - Enables logging of BPWR page 18 in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_18_LOG_ENABLED
+#define ANT_BPWR_PAGE_18_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_18_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_18_LOG_LEVEL
+#define ANT_BPWR_PAGE_18_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_18_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_18_INFO_COLOR
+#define ANT_BPWR_PAGE_18_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_COMMON_PAGE_80_ENABLED - ant_common_page_80 - ANT+ common page 80
+//==========================================================
+#ifndef ANT_COMMON_PAGE_80_ENABLED
+#define ANT_COMMON_PAGE_80_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_80_LOG_ENABLED - Enables logging of common page 80 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_80_LOG_ENABLED
+#define ANT_COMMON_PAGE_80_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_80_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_80_LOG_LEVEL
+#define ANT_COMMON_PAGE_80_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_80_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_80_INFO_COLOR
+#define ANT_COMMON_PAGE_80_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> ANT_COMMON_PAGE_81_ENABLED - ant_common_page_81 - ANT+ common page 81
+//==========================================================
+#ifndef ANT_COMMON_PAGE_81_ENABLED
+#define ANT_COMMON_PAGE_81_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_81_LOG_ENABLED - Enables logging of common page 81 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_81_LOG_ENABLED
+#define ANT_COMMON_PAGE_81_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_81_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_81_LOG_LEVEL
+#define ANT_COMMON_PAGE_81_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_81_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_81_INFO_COLOR
+#define ANT_COMMON_PAGE_81_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_KEY_MANAGER_ENABLED  - ant_key_manager - Software Component
+ 
+
+#ifndef ANT_KEY_MANAGER_ENABLED
+#define ANT_KEY_MANAGER_ENABLED 1
+#endif
+
+// <e> ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP
+//==========================================================
+#ifndef ANT_STATE_INDICATOR_ENABLED
+#define ANT_STATE_INDICATOR_ENABLED 1
+#endif
+// <o> ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY - Shutdown observer priority. 
+#ifndef ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY
+#define ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/iar/ant_bpwr_rx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/iar/ant_bpwr_rx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/iar/ant_bpwr_rx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/iar/ant_bpwr_rx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/iar/ant_bpwr_rx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..c55a095
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/iar/ant_bpwr_rx_d52_starterkit_s212.ewp
@@ -0,0 +1,1111 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_bpwr_rx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_bpwr_rx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_bpwr_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\ant_bpwr.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_common_data.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_1.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_16.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_17.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_18.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_torque.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator\ant_bpwr_simulator.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/iar/ant_bpwr_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/iar/ant_bpwr_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/iar/ant_bpwr_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/ses/ant_bpwr_rx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/ses/ant_bpwr_rx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..0a2e687
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/ses/ant_bpwr_rx_d52_starterkit_s212.emProject
@@ -0,0 +1,120 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_bpwr_rx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_bpwr_rx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_key_manager;../../../../../../../../components/ant/ant_key_manager/config;../../../../../../../../components/ant/ant_profiles/ant_bpwr;../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages;../../../../../../../../components/ant/ant_profiles/ant_bpwr/simulator;../../../../../../../../components/ant/ant_profiles/ant_bpwr/utils;../../../../../../../../components/ant/ant_profiles/ant_common/pages;../../../../../../../../components/ant/ant_state_indicator;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/mutex;../../../../../../../../components/libraries/pwr_mgmt;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/sensorsim;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+      <file file_name="../../../../../../../../components/libraries/sensorsim/sensorsim.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/ant_bpwr.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_common_data.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_1.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_16.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_17.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_18.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_torque.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/simulator/ant_bpwr_simulator.c" />
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_80.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_81.c" />
+      <file file_name="../../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" />
+      <file file_name="../../../../../../../../components/ant/ant_state_indicator/ant_state_indicator.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp_btn_ant.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/ses/ant_bpwr_rx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/ses/ant_bpwr_rx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..449f8f4
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/ses/ant_bpwr_rx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_bpwr_rx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..93f065c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/main.c
new file mode 100644
index 0000000..9390201
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/main.c
@@ -0,0 +1,282 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2012
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/*
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdio.h>
+#include "nrf.h"
+#include "bsp.h"
+#include "hardfault.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "nrf_pwr_mgmt.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "ant_key_manager.h"
+#include "ant_bpwr.h"
+#include "bsp_btn_ant.h"
+#include "ant_state_indicator.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+/** @snippet [ANT BPWR RX Instance] */
+void ant_bpwr_evt_handler(ant_bpwr_profile_t * p_profile, ant_bpwr_evt_t event);
+
+BPWR_DISP_CHANNEL_CONFIG_DEF(m_ant_bpwr,
+                             BPWR_CHANNEL_NUM,
+                             CHAN_ID_TRANS_TYPE,
+                             CHAN_ID_DEV_NUM,
+                             ANTPLUS_NETWORK_NUM);
+BPWR_DISP_PROFILE_CONFIG_DEF(m_ant_bpwr,
+                             ant_bpwr_evt_handler);
+
+static ant_bpwr_profile_t m_ant_bpwr;
+/** @snippet [ANT BPWR RX Instance] */
+
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, ANT_BPWR_ANT_OBSERVER_PRIO,
+                     ant_bpwr_disp_evt_handler, &m_ant_bpwr);
+
+
+/** @snippet [ANT BPWR RX Profile handling] */
+
+/**@brief Function for handling bsp events.
+ */
+void bsp_evt_handler(bsp_event_t evt)
+{
+    ret_code_t            err_code;
+    ant_bpwr_page1_data_t page1;
+
+    switch (evt)
+    {
+        case BSP_EVENT_KEY_0:
+            // request to calibrating the sensor
+            page1    = ANT_BPWR_GENERAL_CALIB_REQUEST();
+            err_code = ant_bpwr_calib_request(&m_ant_bpwr, &page1);
+            APP_ERROR_CHECK(err_code);
+            break;
+
+        case BSP_EVENT_SLEEP:
+            nrf_pwr_mgmt_shutdown(NRF_PWR_MGMT_SHUTDOWN_GOTO_SYSOFF);
+            break;
+
+        default:
+            break;
+    }
+}
+
+/**
+ * @brief Function for shutdown events.
+ *
+ * @param[in]   event       Shutdown type.
+ */
+static bool shutdown_handler(nrf_pwr_mgmt_evt_t event)
+{
+    ret_code_t err_code;
+
+    switch (event)
+    {
+        case NRF_PWR_MGMT_EVT_PREPARE_WAKEUP:
+            err_code = bsp_btn_ant_sleep_mode_prepare();
+            APP_ERROR_CHECK(err_code);
+            break;
+
+        default:
+            break;
+    }
+
+    return true;
+}
+
+NRF_PWR_MGMT_HANDLER_REGISTER(shutdown_handler, APP_SHUTDOWN_HANDLER_PRIORITY);
+
+/**@brief Function for handling Bicycle Power profile's events
+ *
+ */
+void ant_bpwr_evt_handler(ant_bpwr_profile_t * p_profile, ant_bpwr_evt_t event)
+{
+    nrf_pwr_mgmt_feed();
+
+    switch (event)
+    {
+        case ANT_BPWR_PAGE_1_UPDATED:
+            // calibration data received from sensor
+            NRF_LOG_DEBUG("Received calibration data");
+            break;
+
+        case ANT_BPWR_PAGE_16_UPDATED:
+            /* fall through */
+        case ANT_BPWR_PAGE_17_UPDATED:
+            /* fall through */
+        case ANT_BPWR_PAGE_18_UPDATED:
+            /* fall through */
+        case ANT_BPWR_PAGE_80_UPDATED:
+            /* fall through */
+        case ANT_BPWR_PAGE_81_UPDATED:
+            // data actualization
+            NRF_LOG_DEBUG("Page was updated");
+            break;
+
+        case ANT_BPWR_CALIB_TIMEOUT:
+            // calibration request time-out
+            NRF_LOG_DEBUG("ANT_BPWR_CALIB_TIMEOUT");
+            break;
+
+        case ANT_BPWR_CALIB_REQUEST_TX_FAILED:
+            // Please consider retrying the request.
+            NRF_LOG_DEBUG("ANT_BPWR_CALIB_REQUEST_TX_FAILED");
+            break;
+
+        default:
+            // never occurred
+            break;
+    }
+}
+
+/**
+ * @brief Function for setup all thinks not directly associated with ANT stack/protocol.
+ * @desc Initialization of: @n
+ *         - app_tarce for debug.
+ *         - app_timer, pre-setup for bsp.
+ *         - bsp for signaling LEDs and user buttons.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                        bsp_evt_handler);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_btn_ant_init(m_ant_bpwr.channel_number, BPWR_DISP_CHANNEL_TYPE);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_state_indicator_init(m_ant_bpwr.channel_number, BPWR_DISP_CHANNEL_TYPE);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**
+ * @brief Function for ANT stack initialization.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_plus_key_set(ANTPLUS_NETWORK_NUM);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**
+ * @brief Function for Bicycle Power profile initialization.
+ *
+ * @details Initializes the Bicycle Power profile and open ANT channel.
+ */
+static void profile_setup(void)
+{
+/** @snippet [ANT BPWR RX Profile Setup] */
+    ret_code_t err_code = ant_bpwr_disp_init(&m_ant_bpwr,
+                                             BPWR_DISP_CHANNEL_CONFIG(m_ant_bpwr),
+                                             BPWR_DISP_PROFILE_CONFIG(m_ant_bpwr));
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_bpwr_disp_open(&m_ant_bpwr);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_state_indicator_channel_opened();
+    APP_ERROR_CHECK(err_code);
+/** @snippet [ANT BPWR RX Profile Setup] */
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for application main entry, does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    profile_setup();
+
+    NRF_LOG_INFO("ANT+ Bicycle Power RX example started.");
+
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/arm4/ant_bpwr_rx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/arm4/ant_bpwr_rx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/arm4/ant_bpwr_rx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/arm4/ant_bpwr_rx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/arm4/ant_bpwr_rx_pca10040_s212.uvproj
new file mode 100644
index 0000000..84a533a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/arm4/ant_bpwr_rx_pca10040_s212.uvproj
@@ -0,0 +1,590 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>            <File>
+              <FileName>bsp_btn_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_bpwr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\ant_bpwr.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_common_data.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_common_data.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_16.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_16.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_17.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_17.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_18.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_18.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_torque.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_torque.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator\ant_bpwr_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_80.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_81.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/arm5_no_packs/ant_bpwr_rx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/arm5_no_packs/ant_bpwr_rx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/arm5_no_packs/ant_bpwr_rx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/arm5_no_packs/ant_bpwr_rx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/arm5_no_packs/ant_bpwr_rx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..3ca6bf6
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/arm5_no_packs/ant_bpwr_rx_pca10040_s212.uvprojx
@@ -0,0 +1,614 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>            <File>
+              <FileName>bsp_btn_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_bpwr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\ant_bpwr.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_common_data.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_common_data.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_16.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_16.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_17.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_17.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_18.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_18.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_torque.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_torque.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator\ant_bpwr_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_80.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_81.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..e2d1428
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,213 @@
+PROJECT_NAME     := ant_bpwr_rx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_bpwr_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/components/libraries/sensorsim/sensorsim.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/ant_bpwr.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_common_data.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_1.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_16.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_17.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_18.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_torque.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/simulator/ant_bpwr_simulator.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_80.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_81.c \
+  $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \
+  $(SDK_ROOT)/components/ant/ant_state_indicator/ant_state_indicator.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp_btn_ant.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/simulator \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/ant/ant_key_manager \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  ../config \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/utils \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr \
+  $(SDK_ROOT)/components/ant/ant_state_indicator \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/ant/ant_key_manager/config \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/sensorsim \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/armgcc/ant_bpwr_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/armgcc/ant_bpwr_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..840d4d1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/armgcc/ant_bpwr_rx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..0c28543
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,4239 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANTPLUS_NETWORK_NUM - ANT PLUS network number. 
+#ifndef ANTPLUS_NETWORK_NUM
+#define ANTPLUS_NETWORK_NUM 0
+#endif
+
+// <o> APP_SHUTDOWN_HANDLER_PRIORITY - Application shutdown observer priority. 
+#ifndef APP_SHUTDOWN_HANDLER_PRIORITY
+#define APP_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// <o> BPWR_CHANNEL_NUM - Channel number assigned to BPWR profile. 
+#ifndef BPWR_CHANNEL_NUM
+#define BPWR_CHANNEL_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 0
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Board Support 
+
+//==========================================================
+// <e> BSP_BTN_ANT_ENABLED - bsp_btn_ant - Button Control for ANT
+//==========================================================
+#ifndef BSP_BTN_ANT_ENABLED
+#define BSP_BTN_ANT_ENABLED 1
+#endif
+// <o> BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID - Wakeup button ID. 
+#ifndef BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID
+#define BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID 3
+#endif
+
+// <o> BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID - Sleep button ID. 
+#ifndef BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID
+#define BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID 3
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <e> ANT_BPWR_ENABLED - ant_bpwr - Bicycle Power Profile
+//==========================================================
+#ifndef ANT_BPWR_ENABLED
+#define ANT_BPWR_ENABLED 1
+#endif
+// <e> ANT_BPWR_LOG_ENABLED - Enables general logging in the module.
+//==========================================================
+#ifndef ANT_BPWR_LOG_ENABLED
+#define ANT_BPWR_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_LOG_LEVEL
+#define ANT_BPWR_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_INFO_COLOR
+#define ANT_BPWR_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_COMMON_LOG_ENABLED - Enables logging of BPWR tracing common data.
+//==========================================================
+#ifndef ANT_BPWR_COMMON_LOG_ENABLED
+#define ANT_BPWR_COMMON_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_COMMON_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_COMMON_LOG_LEVEL
+#define ANT_BPWR_COMMON_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_COMMON_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_COMMON_INFO_COLOR
+#define ANT_BPWR_COMMON_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_TORQUE_LOG_ENABLED - Enables logging of BPWR torque page in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_TORQUE_LOG_ENABLED
+#define ANT_BPWR_PAGE_TORQUE_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_TORQUE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_TORQUE_LOG_LEVEL
+#define ANT_BPWR_PAGE_TORQUE_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_TORQUE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_TORQUE_INFO_COLOR
+#define ANT_BPWR_PAGE_TORQUE_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_1_LOG_ENABLED - Enables logging of BPWR page 1 in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_1_LOG_ENABLED
+#define ANT_BPWR_PAGE_1_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_1_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_1_LOG_LEVEL
+#define ANT_BPWR_PAGE_1_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_1_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_1_INFO_COLOR
+#define ANT_BPWR_PAGE_1_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_16_LOG_ENABLED - Enables logging of BPWR page 16 in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_16_LOG_ENABLED
+#define ANT_BPWR_PAGE_16_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_16_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_16_LOG_LEVEL
+#define ANT_BPWR_PAGE_16_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_16_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_16_INFO_COLOR
+#define ANT_BPWR_PAGE_16_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_17_LOG_ENABLED - Enables logging of BPWR page 17 in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_17_LOG_ENABLED
+#define ANT_BPWR_PAGE_17_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_17_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_17_LOG_LEVEL
+#define ANT_BPWR_PAGE_17_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_17_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_17_INFO_COLOR
+#define ANT_BPWR_PAGE_17_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_18_LOG_ENABLED - Enables logging of BPWR page 18 in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_18_LOG_ENABLED
+#define ANT_BPWR_PAGE_18_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_18_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_18_LOG_LEVEL
+#define ANT_BPWR_PAGE_18_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_18_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_18_INFO_COLOR
+#define ANT_BPWR_PAGE_18_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_COMMON_PAGE_80_ENABLED - ant_common_page_80 - ANT+ common page 80
+//==========================================================
+#ifndef ANT_COMMON_PAGE_80_ENABLED
+#define ANT_COMMON_PAGE_80_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_80_LOG_ENABLED - Enables logging of common page 80 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_80_LOG_ENABLED
+#define ANT_COMMON_PAGE_80_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_80_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_80_LOG_LEVEL
+#define ANT_COMMON_PAGE_80_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_80_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_80_INFO_COLOR
+#define ANT_COMMON_PAGE_80_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> ANT_COMMON_PAGE_81_ENABLED - ant_common_page_81 - ANT+ common page 81
+//==========================================================
+#ifndef ANT_COMMON_PAGE_81_ENABLED
+#define ANT_COMMON_PAGE_81_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_81_LOG_ENABLED - Enables logging of common page 81 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_81_LOG_ENABLED
+#define ANT_COMMON_PAGE_81_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_81_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_81_LOG_LEVEL
+#define ANT_COMMON_PAGE_81_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_81_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_81_INFO_COLOR
+#define ANT_COMMON_PAGE_81_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_KEY_MANAGER_ENABLED  - ant_key_manager - Software Component
+ 
+
+#ifndef ANT_KEY_MANAGER_ENABLED
+#define ANT_KEY_MANAGER_ENABLED 1
+#endif
+
+// <e> ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP
+//==========================================================
+#ifndef ANT_STATE_INDICATOR_ENABLED
+#define ANT_STATE_INDICATOR_ENABLED 1
+#endif
+// <o> ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY - Shutdown observer priority. 
+#ifndef ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY
+#define ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/iar/ant_bpwr_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/iar/ant_bpwr_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/iar/ant_bpwr_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/iar/ant_bpwr_rx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/iar/ant_bpwr_rx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/iar/ant_bpwr_rx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/iar/ant_bpwr_rx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/iar/ant_bpwr_rx_pca10040_s212.ewp
new file mode 100644
index 0000000..daea8d7
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/iar/ant_bpwr_rx_pca10040_s212.ewp
@@ -0,0 +1,1114 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_bpwr_rx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_bpwr_rx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_bpwr_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\ant_bpwr.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_common_data.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_1.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_16.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_17.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_18.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_torque.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator\ant_bpwr_simulator.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/ses/ant_bpwr_rx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/ses/ant_bpwr_rx_pca10040_s212.emProject
new file mode 100644
index 0000000..e9c33f7
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/ses/ant_bpwr_rx_pca10040_s212.emProject
@@ -0,0 +1,119 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_bpwr_rx_pca10040_s212" target="8" version="2">
+  <project Name="ant_bpwr_rx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_key_manager;../../../../../../../../components/ant/ant_key_manager/config;../../../../../../../../components/ant/ant_profiles/ant_bpwr;../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages;../../../../../../../../components/ant/ant_profiles/ant_bpwr/simulator;../../../../../../../../components/ant/ant_profiles/ant_bpwr/utils;../../../../../../../../components/ant/ant_profiles/ant_common/pages;../../../../../../../../components/ant/ant_state_indicator;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/mutex;../../../../../../../../components/libraries/pwr_mgmt;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/sensorsim;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+      <file file_name="../../../../../../../../components/libraries/sensorsim/sensorsim.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/ant_bpwr.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_common_data.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_1.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_16.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_17.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_18.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_torque.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/simulator/ant_bpwr_simulator.c" />
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_80.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_81.c" />
+      <file file_name="../../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" />
+      <file file_name="../../../../../../../../components/ant/ant_state_indicator/ant_state_indicator.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp_btn_ant.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/ses/ant_bpwr_rx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/ses/ant_bpwr_rx_pca10040_s212.emSession
new file mode 100644
index 0000000..84e484a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/ses/ant_bpwr_rx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_bpwr_rx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..d32ea27
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_rx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/ant_bpwr_tx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/ant_bpwr_tx.eww
new file mode 100644
index 0000000..ef2c8a7
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/ant_bpwr_tx.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_bpwr_tx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_bpwr_tx_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/bpwr_rx_device_profile.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/bpwr_rx_device_profile.xml
new file mode 100644
index 0000000..86c3671
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/bpwr_rx_device_profile.xml
@@ -0,0 +1,124 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:2015-07-10 12:41:17-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup>
+      <NetworkKey Net="0" Key="00-00-00-00-00-00-00-00" />
+    </DeviceSetup>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">0</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">11</deviceType>
+      <transmissionType type="System.Byte">5</transmissionType>
+      <msgPeriod type="System.UInt16">8182</msgPeriod>
+      <radioFreq type="System.Byte">57</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">34</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">35</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">36</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">37</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">38</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">39</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">40</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/arm4/ant_bpwr_tx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/arm4/ant_bpwr_tx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/arm4/ant_bpwr_tx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/arm4/ant_bpwr_tx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/arm4/ant_bpwr_tx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..018a751
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/arm4/ant_bpwr_tx_d52_starterkit_s212.uvproj
@@ -0,0 +1,590 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_bpwr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\ant_bpwr.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_common_data.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_common_data.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_16.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_16.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_17.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_17.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_18.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_18.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_torque.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_torque.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator\ant_bpwr_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_80.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_81.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/arm5_no_packs/ant_bpwr_tx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/arm5_no_packs/ant_bpwr_tx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/arm5_no_packs/ant_bpwr_tx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/arm5_no_packs/ant_bpwr_tx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/arm5_no_packs/ant_bpwr_tx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..b7bfeb2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/arm5_no_packs/ant_bpwr_tx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,614 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_bpwr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\ant_bpwr.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_common_data.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_common_data.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_16.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_16.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_17.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_17.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_18.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_18.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_torque.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_torque.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator\ant_bpwr_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_80.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_81.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..1a16528
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,209 @@
+PROJECT_NAME     := ant_bpwr_tx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_bpwr_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/components/libraries/sensorsim/sensorsim.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/ant_bpwr.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_common_data.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_1.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_16.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_17.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_18.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_torque.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/simulator/ant_bpwr_simulator.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_80.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_81.c \
+  $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \
+  $(SDK_ROOT)/components/ant/ant_state_indicator/ant_state_indicator.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/simulator \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/ant/ant_key_manager \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  ../config \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/utils \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr \
+  $(SDK_ROOT)/components/ant/ant_state_indicator \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/ant/ant_key_manager/config \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/sensorsim \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/armgcc/ant_bpwr_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/armgcc/ant_bpwr_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..1b5cea2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/armgcc/ant_bpwr_tx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..cf7b3c9
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,4335 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANTPLUS_NETWORK_NUM - ANT PLUS network number. 
+#ifndef ANTPLUS_NETWORK_NUM
+#define ANTPLUS_NETWORK_NUM 0
+#endif
+
+// <o> BPWR_CHANNEL_NUM - Channel number assigned to BPWR profile. 
+#ifndef BPWR_CHANNEL_NUM
+#define BPWR_CHANNEL_NUM 0
+#endif
+
+// <o> CALIBRATION_DATA - Calibration data. 
+#ifndef CALIBRATION_DATA
+#define CALIBRATION_DATA 21930
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 1
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 5
+#endif
+
+// <h> MANUFACTURER_IDENTIFICATION_COMMON_PAGE 
+
+//==========================================================
+// <o> BPWR_HW_REVISION - Hardware revision for manufacturer's identification common page 
+#ifndef BPWR_HW_REVISION
+#define BPWR_HW_REVISION 127
+#endif
+
+// <o> BPWR_MANUFACTURER_ID - Manufacturer ID for manufacturer's identification common page 
+#ifndef BPWR_MANUFACTURER_ID
+#define BPWR_MANUFACTURER_ID 43690
+#endif
+
+// <o> BPWR_MODEL_NUMBER - Model number for manufacturer's identification common page 
+#ifndef BPWR_MODEL_NUMBER
+#define BPWR_MODEL_NUMBER 21845
+#endif
+
+// </h> 
+//==========================================================
+
+// <o> MODIFICATION_TYPE  - Type of sensor values update
+ 
+
+// <i> It can be updated by buttons or periodically rise and fall in auto mode
+// <0=> MODIFICATION_TYPE_BUTTON 
+// <1=> MODIFICATION_TYPE_AUTO 
+
+#ifndef MODIFICATION_TYPE
+#define MODIFICATION_TYPE 0
+#endif
+
+// <h> PRODUCT_INFORMATION_COMMON_PAGE 
+
+//==========================================================
+// <o> BPWR_SW_REVISION_MAJOR - Software revision major number for product information common page 
+#ifndef BPWR_SW_REVISION_MAJOR
+#define BPWR_SW_REVISION_MAJOR 170
+#endif
+
+// <o> BPWR_SW_REVISION_MINOR - Software revision minor number for product information common page, unused value 
+#ifndef BPWR_SW_REVISION_MINOR
+#define BPWR_SW_REVISION_MINOR 255
+#endif
+
+// <o> BPWR_SERIAL_NUMBER - Serial number for product information common page 
+#ifndef BPWR_SERIAL_NUMBER
+#define BPWR_SERIAL_NUMBER 12345678
+#endif
+
+// </h> 
+//==========================================================
+
+// <o> SENSOR_TYPE  - Type of transmitted data
+ 
+// <0=> Power Only Sensor 
+// <1=> Wheel Torque Sensor 
+// <2=> Crank Torque Sensor 
+
+#ifndef SENSOR_TYPE
+#define SENSOR_TYPE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <e> ANT_BPWR_ENABLED - ant_bpwr - Bicycle Power Profile
+//==========================================================
+#ifndef ANT_BPWR_ENABLED
+#define ANT_BPWR_ENABLED 1
+#endif
+// <e> ANT_BPWR_LOG_ENABLED - Enables general logging in the module.
+//==========================================================
+#ifndef ANT_BPWR_LOG_ENABLED
+#define ANT_BPWR_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_LOG_LEVEL
+#define ANT_BPWR_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_INFO_COLOR
+#define ANT_BPWR_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_COMMON_LOG_ENABLED - Enables logging of BPWR tracing common data.
+//==========================================================
+#ifndef ANT_BPWR_COMMON_LOG_ENABLED
+#define ANT_BPWR_COMMON_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_COMMON_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_COMMON_LOG_LEVEL
+#define ANT_BPWR_COMMON_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_COMMON_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_COMMON_INFO_COLOR
+#define ANT_BPWR_COMMON_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_TORQUE_LOG_ENABLED - Enables logging of BPWR torque page in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_TORQUE_LOG_ENABLED
+#define ANT_BPWR_PAGE_TORQUE_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_TORQUE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_TORQUE_LOG_LEVEL
+#define ANT_BPWR_PAGE_TORQUE_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_TORQUE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_TORQUE_INFO_COLOR
+#define ANT_BPWR_PAGE_TORQUE_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_1_LOG_ENABLED - Enables logging of BPWR page 1 in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_1_LOG_ENABLED
+#define ANT_BPWR_PAGE_1_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_1_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_1_LOG_LEVEL
+#define ANT_BPWR_PAGE_1_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_1_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_1_INFO_COLOR
+#define ANT_BPWR_PAGE_1_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_16_LOG_ENABLED - Enables logging of BPWR page 16 in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_16_LOG_ENABLED
+#define ANT_BPWR_PAGE_16_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_16_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_16_LOG_LEVEL
+#define ANT_BPWR_PAGE_16_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_16_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_16_INFO_COLOR
+#define ANT_BPWR_PAGE_16_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_17_LOG_ENABLED - Enables logging of BPWR page 17 in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_17_LOG_ENABLED
+#define ANT_BPWR_PAGE_17_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_17_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_17_LOG_LEVEL
+#define ANT_BPWR_PAGE_17_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_17_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_17_INFO_COLOR
+#define ANT_BPWR_PAGE_17_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_18_LOG_ENABLED - Enables logging of BPWR page 18 in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_18_LOG_ENABLED
+#define ANT_BPWR_PAGE_18_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_18_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_18_LOG_LEVEL
+#define ANT_BPWR_PAGE_18_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_18_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_18_INFO_COLOR
+#define ANT_BPWR_PAGE_18_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_COMMON_PAGE_80_ENABLED - ant_common_page_80 - ANT+ common page 80
+//==========================================================
+#ifndef ANT_COMMON_PAGE_80_ENABLED
+#define ANT_COMMON_PAGE_80_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_80_LOG_ENABLED - Enables logging of common page 80 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_80_LOG_ENABLED
+#define ANT_COMMON_PAGE_80_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_80_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_80_LOG_LEVEL
+#define ANT_COMMON_PAGE_80_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_80_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_80_INFO_COLOR
+#define ANT_COMMON_PAGE_80_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> ANT_COMMON_PAGE_81_ENABLED - ant_common_page_81 - ANT+ common page 81
+//==========================================================
+#ifndef ANT_COMMON_PAGE_81_ENABLED
+#define ANT_COMMON_PAGE_81_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_81_LOG_ENABLED - Enables logging of common page 81 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_81_LOG_ENABLED
+#define ANT_COMMON_PAGE_81_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_81_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_81_LOG_LEVEL
+#define ANT_COMMON_PAGE_81_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_81_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_81_INFO_COLOR
+#define ANT_COMMON_PAGE_81_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_KEY_MANAGER_ENABLED  - ant_key_manager - Software Component
+ 
+
+#ifndef ANT_KEY_MANAGER_ENABLED
+#define ANT_KEY_MANAGER_ENABLED 1
+#endif
+
+// <e> ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP
+//==========================================================
+#ifndef ANT_STATE_INDICATOR_ENABLED
+#define ANT_STATE_INDICATOR_ENABLED 1
+#endif
+// <o> ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY - Shutdown observer priority. 
+#ifndef ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY
+#define ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/iar/ant_bpwr_tx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/iar/ant_bpwr_tx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/iar/ant_bpwr_tx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/iar/ant_bpwr_tx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/iar/ant_bpwr_tx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..fce0d90
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/iar/ant_bpwr_tx_d52_starterkit_s212.ewp
@@ -0,0 +1,1110 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_bpwr_tx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_bpwr_tx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_bpwr_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\ant_bpwr.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_common_data.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_1.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_16.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_17.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_18.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_torque.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator\ant_bpwr_simulator.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/iar/ant_bpwr_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/iar/ant_bpwr_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/iar/ant_bpwr_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/ses/ant_bpwr_tx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/ses/ant_bpwr_tx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..04ca3cd
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/ses/ant_bpwr_tx_d52_starterkit_s212.emProject
@@ -0,0 +1,119 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_bpwr_tx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_bpwr_tx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_key_manager;../../../../../../../../components/ant/ant_key_manager/config;../../../../../../../../components/ant/ant_profiles/ant_bpwr;../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages;../../../../../../../../components/ant/ant_profiles/ant_bpwr/simulator;../../../../../../../../components/ant/ant_profiles/ant_bpwr/utils;../../../../../../../../components/ant/ant_profiles/ant_common/pages;../../../../../../../../components/ant/ant_state_indicator;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/mutex;../../../../../../../../components/libraries/pwr_mgmt;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/sensorsim;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+      <file file_name="../../../../../../../../components/libraries/sensorsim/sensorsim.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/ant_bpwr.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_common_data.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_1.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_16.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_17.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_18.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_torque.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/simulator/ant_bpwr_simulator.c" />
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_80.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_81.c" />
+      <file file_name="../../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" />
+      <file file_name="../../../../../../../../components/ant/ant_state_indicator/ant_state_indicator.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/ses/ant_bpwr_tx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/ses/ant_bpwr_tx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..adc09f2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/ses/ant_bpwr_tx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_bpwr_tx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..93f065c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/main.c
new file mode 100644
index 0000000..5da2190
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/main.c
@@ -0,0 +1,333 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2012
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @defgroup ant_bpwr_sensor_main ANT Bicycle Power sensor example
+ * @{
+ * @ingroup nrf_ant_bicycle_power
+ *
+ * @brief Example of ANT Bicycle Power profile display.
+ *
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdio.h>
+#include "nrf.h"
+#include "bsp.h"
+#include "hardfault.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "nrf_pwr_mgmt.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "ant_key_manager.h"
+#include "ant_bpwr.h"
+#include "ant_bpwr_simulator.h"
+#include "ant_state_indicator.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+#define MODIFICATION_TYPE_BUTTON 0 /* predefined value, MUST REMAIN UNCHANGED */
+#define MODIFICATION_TYPE_AUTO   1 /* predefined value, MUST REMAIN UNCHANGED */
+
+#if (MODIFICATION_TYPE != MODIFICATION_TYPE_BUTTON) \
+    && (MODIFICATION_TYPE != MODIFICATION_TYPE_AUTO)
+    #error Unsupported value of MODIFICATION_TYPE.
+#endif
+
+/** @snippet [ANT BPWR TX Instance] */
+void ant_bpwr_evt_handler(ant_bpwr_profile_t * p_profile, ant_bpwr_evt_t event);
+void ant_bpwr_calib_handler(ant_bpwr_profile_t * p_profile, ant_bpwr_page1_data_t * p_page1);
+
+BPWR_SENS_CHANNEL_CONFIG_DEF(m_ant_bpwr,
+                             BPWR_CHANNEL_NUM,
+                             CHAN_ID_TRANS_TYPE,
+                             CHAN_ID_DEV_NUM,
+                             ANTPLUS_NETWORK_NUM);
+BPWR_SENS_PROFILE_CONFIG_DEF(m_ant_bpwr,
+                            (ant_bpwr_torque_t)(SENSOR_TYPE),
+                            ant_bpwr_calib_handler,
+                            ant_bpwr_evt_handler);
+
+static ant_bpwr_profile_t m_ant_bpwr;
+
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, ANT_BPWR_ANT_OBSERVER_PRIO,
+                     ant_bpwr_sens_evt_handler, &m_ant_bpwr);
+
+/** @snippet [ANT BPWR TX Instance] */
+
+static ant_bpwr_simulator_t  m_ant_bpwr_simulator;
+
+/**@brief Function for handling bsp events.
+ */
+/** @snippet [ANT BPWR simulator button] */
+void bsp_evt_handler(bsp_event_t event)
+{
+    switch (event)
+    {
+        case BSP_EVENT_KEY_0:
+            ant_bpwr_simulator_increment(&m_ant_bpwr_simulator);
+            break;
+
+        case BSP_EVENT_KEY_1:
+            ant_bpwr_simulator_decrement(&m_ant_bpwr_simulator);
+            break;
+
+        case BSP_EVENT_KEY_2:
+            ant_bpwr_calib_response(&m_ant_bpwr);
+            break;
+
+        default:
+            break;
+    }
+}
+/** @snippet [ANT BPWR simulator button] */
+
+/**@brief Function for handling ANT BPWR events.
+ */
+/** @snippet [ANT BPWR simulator call] */
+void ant_bpwr_evt_handler(ant_bpwr_profile_t * p_profile, ant_bpwr_evt_t event)
+{
+    nrf_pwr_mgmt_feed();
+
+    switch (event)
+    {
+        case ANT_BPWR_PAGE_1_UPDATED:
+            /* fall through */
+        case ANT_BPWR_PAGE_16_UPDATED:
+            /* fall through */
+        case ANT_BPWR_PAGE_17_UPDATED:
+            /* fall through */
+        case ANT_BPWR_PAGE_18_UPDATED:
+            /* fall through */
+        case ANT_BPWR_PAGE_80_UPDATED:
+            /* fall through */
+        case ANT_BPWR_PAGE_81_UPDATED:
+            ant_bpwr_simulator_one_iteration(&m_ant_bpwr_simulator, event);
+            break;
+
+        default:
+            break;
+    }
+}
+/** @snippet [ANT BPWR simulator call] */
+
+/**@brief Function for handling ANT BPWR events.
+ */
+/** @snippet [ANT BPWR calibration] */
+void ant_bpwr_calib_handler(ant_bpwr_profile_t * p_profile, ant_bpwr_page1_data_t * p_page1)
+{
+    switch (p_page1->calibration_id)
+    {
+        case ANT_BPWR_CALIB_ID_MANUAL:
+            m_ant_bpwr.BPWR_PROFILE_calibration_id     = ANT_BPWR_CALIB_ID_MANUAL_SUCCESS;
+            m_ant_bpwr.BPWR_PROFILE_general_calib_data = CALIBRATION_DATA;
+            break;
+
+        case ANT_BPWR_CALIB_ID_AUTO:
+            m_ant_bpwr.BPWR_PROFILE_calibration_id     = ANT_BPWR_CALIB_ID_MANUAL_SUCCESS;
+            m_ant_bpwr.BPWR_PROFILE_auto_zero_status   = p_page1->auto_zero_status;
+            m_ant_bpwr.BPWR_PROFILE_general_calib_data = CALIBRATION_DATA;
+            break;
+
+        case ANT_BPWR_CALIB_ID_CUSTOM_REQ:
+            m_ant_bpwr.BPWR_PROFILE_calibration_id = ANT_BPWR_CALIB_ID_CUSTOM_REQ_SUCCESS;
+            memcpy(m_ant_bpwr.BPWR_PROFILE_custom_calib_data, p_page1->data.custom_calib,
+                   sizeof (m_ant_bpwr.BPWR_PROFILE_custom_calib_data));
+            break;
+
+        case ANT_BPWR_CALIB_ID_CUSTOM_UPDATE:
+            m_ant_bpwr.BPWR_PROFILE_calibration_id = ANT_BPWR_CALIB_ID_CUSTOM_UPDATE_SUCCESS;
+            memcpy(m_ant_bpwr.BPWR_PROFILE_custom_calib_data, p_page1->data.custom_calib,
+                   sizeof (m_ant_bpwr.BPWR_PROFILE_custom_calib_data));
+            break;
+
+        default:
+            break;
+    }
+}
+/** @snippet [ANT BPWR calibration] */
+
+/**
+ * @brief Function for setup all thinks not directly associated with ANT stack/protocol.
+ * @desc Initialization of: @n
+ *         - app_timer, pre-setup for bsp.
+ *         - bsp for signaling LEDs and user buttons.
+ */
+static void utils_setup(void)
+{
+    // Initialize and start a single continuous mode timer, which is used to update the event time
+    // on the main data page.
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                        bsp_evt_handler);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_state_indicator_init(m_ant_bpwr.channel_number, BPWR_SENS_CHANNEL_TYPE);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for the BPWR simulator initialization.
+ */
+void simulator_setup(void)
+{
+    /** @snippet [ANT BPWR simulator init] */
+    const ant_bpwr_simulator_cfg_t simulator_cfg =
+    {
+        .p_profile   = &m_ant_bpwr,
+        .sensor_type = (ant_bpwr_torque_t)(SENSOR_TYPE),
+    };
+    /** @snippet [ANT BPWR simulator init] */
+
+#if MODIFICATION_TYPE == MODIFICATION_TYPE_AUTO
+    /** @snippet [ANT BPWR simulator auto init] */
+    ant_bpwr_simulator_init(&m_ant_bpwr_simulator, &simulator_cfg, true);
+    /** @snippet [ANT BPWR simulator auto init] */
+#else
+    /** @snippet [ANT BPWR simulator button init] */
+    ant_bpwr_simulator_init(&m_ant_bpwr_simulator, &simulator_cfg, false);
+    /** @snippet [ANT BPWR simulator button init] */
+#endif
+}
+
+/**
+ * @brief Function for ANT stack initialization.
+ *
+ * @details Initializes the SoftDevice and the ANT event interrupt.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_plus_key_set(ANTPLUS_NETWORK_NUM);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**
+ * @brief Function for Bicycle Power profile initialization.
+ *
+ * @details Initializes the Bicycle Power profile and open ANT channel.
+ */
+static void profile_setup(void)
+{
+/** @snippet [ANT BPWR TX Profile Setup] */
+    ret_code_t err_code;
+
+    err_code = ant_bpwr_sens_init(&m_ant_bpwr,
+                                  BPWR_SENS_CHANNEL_CONFIG(m_ant_bpwr),
+                                  BPWR_SENS_PROFILE_CONFIG(m_ant_bpwr));
+    APP_ERROR_CHECK(err_code);
+
+    // fill manufacturer's common data page.
+    m_ant_bpwr.page_80 = ANT_COMMON_page80(BPWR_HW_REVISION,
+                                           BPWR_MANUFACTURER_ID,
+                                           BPWR_MODEL_NUMBER);
+    // fill product's common data page.
+    m_ant_bpwr.page_81 = ANT_COMMON_page81(BPWR_SW_REVISION_MAJOR,
+                                           BPWR_SW_REVISION_MINOR,
+                                           BPWR_SERIAL_NUMBER);
+
+    m_ant_bpwr.BPWR_PROFILE_auto_zero_status = ANT_BPWR_AUTO_ZERO_OFF;
+
+    err_code = ant_bpwr_sens_open(&m_ant_bpwr);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_state_indicator_channel_opened();
+    APP_ERROR_CHECK(err_code);
+/** @snippet [ANT BPWR TX Profile Setup] */
+}
+
+/**@brief Function for application main entry, does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    simulator_setup();
+    profile_setup();
+
+    NRF_LOG_INFO("ANT+ Bicycle Power TX example started.");
+
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/arm4/ant_bpwr_tx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/arm4/ant_bpwr_tx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/arm4/ant_bpwr_tx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/arm4/ant_bpwr_tx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/arm4/ant_bpwr_tx_pca10040_s212.uvproj
new file mode 100644
index 0000000..7406ad7
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/arm4/ant_bpwr_tx_pca10040_s212.uvproj
@@ -0,0 +1,587 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_bpwr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\ant_bpwr.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_common_data.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_common_data.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_16.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_16.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_17.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_17.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_18.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_18.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_torque.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_torque.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator\ant_bpwr_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_80.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_81.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/arm5_no_packs/ant_bpwr_tx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/arm5_no_packs/ant_bpwr_tx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/arm5_no_packs/ant_bpwr_tx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/arm5_no_packs/ant_bpwr_tx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/arm5_no_packs/ant_bpwr_tx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..ecd0579
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/arm5_no_packs/ant_bpwr_tx_pca10040_s212.uvprojx
@@ -0,0 +1,611 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_bpwr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\ant_bpwr.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_common_data.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_common_data.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_16.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_16.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_17.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_17.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_18.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_18.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_page_torque.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_torque.c</FilePath>            </File>            <File>
+              <FileName>ant_bpwr_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator\ant_bpwr_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_80.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_81.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..a1eabf2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,212 @@
+PROJECT_NAME     := ant_bpwr_tx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_bpwr_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/components/libraries/sensorsim/sensorsim.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/ant_bpwr.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_common_data.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_1.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_16.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_17.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_18.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_torque.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/simulator/ant_bpwr_simulator.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_80.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_81.c \
+  $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \
+  $(SDK_ROOT)/components/ant/ant_state_indicator/ant_state_indicator.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/simulator \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/ant/ant_key_manager \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  ../config \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/utils \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr \
+  $(SDK_ROOT)/components/ant/ant_state_indicator \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/ant/ant_key_manager/config \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bpwr/pages \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/sensorsim \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/armgcc/ant_bpwr_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/armgcc/ant_bpwr_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..840d4d1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/armgcc/ant_bpwr_tx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..364114e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,4279 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANTPLUS_NETWORK_NUM - ANT PLUS network number. 
+#ifndef ANTPLUS_NETWORK_NUM
+#define ANTPLUS_NETWORK_NUM 0
+#endif
+
+// <o> BPWR_CHANNEL_NUM - Channel number assigned to BPWR profile. 
+#ifndef BPWR_CHANNEL_NUM
+#define BPWR_CHANNEL_NUM 0
+#endif
+
+// <o> CALIBRATION_DATA - Calibration data. 
+#ifndef CALIBRATION_DATA
+#define CALIBRATION_DATA 21930
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 1
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 5
+#endif
+
+// <h> MANUFACTURER_IDENTIFICATION_COMMON_PAGE 
+
+//==========================================================
+// <o> BPWR_HW_REVISION - Hardware revision for manufacturer's identification common page 
+#ifndef BPWR_HW_REVISION
+#define BPWR_HW_REVISION 127
+#endif
+
+// <o> BPWR_MANUFACTURER_ID - Manufacturer ID for manufacturer's identification common page 
+#ifndef BPWR_MANUFACTURER_ID
+#define BPWR_MANUFACTURER_ID 43690
+#endif
+
+// <o> BPWR_MODEL_NUMBER - Model number for manufacturer's identification common page 
+#ifndef BPWR_MODEL_NUMBER
+#define BPWR_MODEL_NUMBER 21845
+#endif
+
+// </h> 
+//==========================================================
+
+// <o> MODIFICATION_TYPE  - Type of sensor values update
+ 
+
+// <i> It can be updated by buttons or periodically rise and fall in auto mode
+// <0=> MODIFICATION_TYPE_BUTTON 
+// <1=> MODIFICATION_TYPE_AUTO 
+
+#ifndef MODIFICATION_TYPE
+#define MODIFICATION_TYPE 0
+#endif
+
+// <h> PRODUCT_INFORMATION_COMMON_PAGE 
+
+//==========================================================
+// <o> BPWR_SW_REVISION_MAJOR - Software revision major number for product information common page 
+#ifndef BPWR_SW_REVISION_MAJOR
+#define BPWR_SW_REVISION_MAJOR 170
+#endif
+
+// <o> BPWR_SW_REVISION_MINOR - Software revision minor number for product information common page, unused value 
+#ifndef BPWR_SW_REVISION_MINOR
+#define BPWR_SW_REVISION_MINOR 255
+#endif
+
+// <o> BPWR_SERIAL_NUMBER - Serial number for product information common page 
+#ifndef BPWR_SERIAL_NUMBER
+#define BPWR_SERIAL_NUMBER 12345678
+#endif
+
+// </h> 
+//==========================================================
+
+// <o> SENSOR_TYPE  - Type of transmitted data
+ 
+// <0=> Power Only Sensor 
+// <1=> Wheel Torque Sensor 
+// <2=> Crank Torque Sensor 
+
+#ifndef SENSOR_TYPE
+#define SENSOR_TYPE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <e> ANT_BPWR_ENABLED - ant_bpwr - Bicycle Power Profile
+//==========================================================
+#ifndef ANT_BPWR_ENABLED
+#define ANT_BPWR_ENABLED 1
+#endif
+// <e> ANT_BPWR_LOG_ENABLED - Enables general logging in the module.
+//==========================================================
+#ifndef ANT_BPWR_LOG_ENABLED
+#define ANT_BPWR_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_LOG_LEVEL
+#define ANT_BPWR_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_INFO_COLOR
+#define ANT_BPWR_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_COMMON_LOG_ENABLED - Enables logging of BPWR tracing common data.
+//==========================================================
+#ifndef ANT_BPWR_COMMON_LOG_ENABLED
+#define ANT_BPWR_COMMON_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_COMMON_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_COMMON_LOG_LEVEL
+#define ANT_BPWR_COMMON_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_COMMON_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_COMMON_INFO_COLOR
+#define ANT_BPWR_COMMON_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_TORQUE_LOG_ENABLED - Enables logging of BPWR torque page in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_TORQUE_LOG_ENABLED
+#define ANT_BPWR_PAGE_TORQUE_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_TORQUE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_TORQUE_LOG_LEVEL
+#define ANT_BPWR_PAGE_TORQUE_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_TORQUE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_TORQUE_INFO_COLOR
+#define ANT_BPWR_PAGE_TORQUE_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_1_LOG_ENABLED - Enables logging of BPWR page 1 in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_1_LOG_ENABLED
+#define ANT_BPWR_PAGE_1_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_1_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_1_LOG_LEVEL
+#define ANT_BPWR_PAGE_1_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_1_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_1_INFO_COLOR
+#define ANT_BPWR_PAGE_1_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_16_LOG_ENABLED - Enables logging of BPWR page 16 in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_16_LOG_ENABLED
+#define ANT_BPWR_PAGE_16_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_16_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_16_LOG_LEVEL
+#define ANT_BPWR_PAGE_16_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_16_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_16_INFO_COLOR
+#define ANT_BPWR_PAGE_16_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_17_LOG_ENABLED - Enables logging of BPWR page 17 in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_17_LOG_ENABLED
+#define ANT_BPWR_PAGE_17_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_17_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_17_LOG_LEVEL
+#define ANT_BPWR_PAGE_17_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_17_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_17_INFO_COLOR
+#define ANT_BPWR_PAGE_17_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BPWR_PAGE_18_LOG_ENABLED - Enables logging of BPWR page 18 in the module.
+//==========================================================
+#ifndef ANT_BPWR_PAGE_18_LOG_ENABLED
+#define ANT_BPWR_PAGE_18_LOG_ENABLED 1
+#endif
+// <o> ANT_BPWR_PAGE_18_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BPWR_PAGE_18_LOG_LEVEL
+#define ANT_BPWR_PAGE_18_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BPWR_PAGE_18_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BPWR_PAGE_18_INFO_COLOR
+#define ANT_BPWR_PAGE_18_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_COMMON_PAGE_80_ENABLED - ant_common_page_80 - ANT+ common page 80
+//==========================================================
+#ifndef ANT_COMMON_PAGE_80_ENABLED
+#define ANT_COMMON_PAGE_80_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_80_LOG_ENABLED - Enables logging of common page 80 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_80_LOG_ENABLED
+#define ANT_COMMON_PAGE_80_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_80_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_80_LOG_LEVEL
+#define ANT_COMMON_PAGE_80_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_80_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_80_INFO_COLOR
+#define ANT_COMMON_PAGE_80_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> ANT_COMMON_PAGE_81_ENABLED - ant_common_page_81 - ANT+ common page 81
+//==========================================================
+#ifndef ANT_COMMON_PAGE_81_ENABLED
+#define ANT_COMMON_PAGE_81_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_81_LOG_ENABLED - Enables logging of common page 81 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_81_LOG_ENABLED
+#define ANT_COMMON_PAGE_81_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_81_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_81_LOG_LEVEL
+#define ANT_COMMON_PAGE_81_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_81_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_81_INFO_COLOR
+#define ANT_COMMON_PAGE_81_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_KEY_MANAGER_ENABLED  - ant_key_manager - Software Component
+ 
+
+#ifndef ANT_KEY_MANAGER_ENABLED
+#define ANT_KEY_MANAGER_ENABLED 1
+#endif
+
+// <e> ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP
+//==========================================================
+#ifndef ANT_STATE_INDICATOR_ENABLED
+#define ANT_STATE_INDICATOR_ENABLED 1
+#endif
+// <o> ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY - Shutdown observer priority. 
+#ifndef ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY
+#define ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/iar/ant_bpwr_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/iar/ant_bpwr_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/iar/ant_bpwr_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/iar/ant_bpwr_tx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/iar/ant_bpwr_tx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/iar/ant_bpwr_tx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/iar/ant_bpwr_tx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/iar/ant_bpwr_tx_pca10040_s212.ewp
new file mode 100644
index 0000000..711a84e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/iar/ant_bpwr_tx_pca10040_s212.ewp
@@ -0,0 +1,1113 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_bpwr_tx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_bpwr_tx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_bpwr_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\ant_bpwr.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_common_data.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_1.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_16.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_17.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_18.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\pages\ant_bpwr_page_torque.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bpwr\simulator\ant_bpwr_simulator.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/ses/ant_bpwr_tx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/ses/ant_bpwr_tx_pca10040_s212.emProject
new file mode 100644
index 0000000..424bdcf
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/ses/ant_bpwr_tx_pca10040_s212.emProject
@@ -0,0 +1,118 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_bpwr_tx_pca10040_s212" target="8" version="2">
+  <project Name="ant_bpwr_tx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_key_manager;../../../../../../../../components/ant/ant_key_manager/config;../../../../../../../../components/ant/ant_profiles/ant_bpwr;../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages;../../../../../../../../components/ant/ant_profiles/ant_bpwr/simulator;../../../../../../../../components/ant/ant_profiles/ant_bpwr/utils;../../../../../../../../components/ant/ant_profiles/ant_common/pages;../../../../../../../../components/ant/ant_state_indicator;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/mutex;../../../../../../../../components/libraries/pwr_mgmt;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/sensorsim;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+      <file file_name="../../../../../../../../components/libraries/sensorsim/sensorsim.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/ant_bpwr.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_common_data.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_1.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_16.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_17.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_18.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_torque.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bpwr/simulator/ant_bpwr_simulator.c" />
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_80.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_81.c" />
+      <file file_name="../../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" />
+      <file file_name="../../../../../../../../components/ant/ant_state_indicator/ant_state_indicator.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/ses/ant_bpwr_tx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/ses/ant_bpwr_tx_pca10040_s212.emSession
new file mode 100644
index 0000000..9398bc2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/ses/ant_bpwr_tx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_bpwr_tx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..d32ea27
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bpwr/bpwr_tx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/ant_bsc_rx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/ant_bsc_rx.eww
new file mode 100644
index 0000000..00f622f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/ant_bsc_rx.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_bsc_rx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_bsc_rx_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/arm4/ant_bsc_rx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/arm4/ant_bsc_rx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/arm4/ant_bsc_rx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/arm4/ant_bsc_rx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/arm4/ant_bsc_rx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..5e2d491
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/arm4/ant_bsc_rx_d52_starterkit_s212.uvproj
@@ -0,0 +1,584 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>            <File>
+              <FileName>bsp_btn_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_bsc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\ant_bsc.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_combined_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_combined_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_4.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_4.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_5.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_5.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/arm5_no_packs/ant_bsc_rx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/arm5_no_packs/ant_bsc_rx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/arm5_no_packs/ant_bsc_rx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/arm5_no_packs/ant_bsc_rx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/arm5_no_packs/ant_bsc_rx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..efca8cf
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/arm5_no_packs/ant_bsc_rx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,608 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>            <File>
+              <FileName>bsp_btn_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_bsc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\ant_bsc.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_combined_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_combined_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_4.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_4.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_5.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_5.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..a708b3b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,204 @@
+PROJECT_NAME     := ant_bsc_rx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_bsc_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/ant_bsc.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_combined_page_0.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_0.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_1.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_2.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_3.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_4.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_5.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \
+  $(SDK_ROOT)/components/ant/ant_state_indicator/ant_state_indicator.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp_btn_ant.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/ant/ant_key_manager \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages \
+  ../config \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/components/ant/ant_state_indicator \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/ant/ant_key_manager/config \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/utils \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/timer \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/armgcc/ant_bsc_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/armgcc/ant_bsc_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..1b5cea2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/armgcc/ant_bsc_rx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..aff6cca
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,4256 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANTPLUS_NETWORK_NUM - ANT PLUS network number. 
+#ifndef ANTPLUS_NETWORK_NUM
+#define ANTPLUS_NETWORK_NUM 0
+#endif
+
+// <o> APP_SHUTDOWN_HANDLER_PRIORITY - Application shutdown observer priority. 
+#ifndef APP_SHUTDOWN_HANDLER_PRIORITY
+#define APP_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// <o> BSC_CHANNEL_NUM - Channel number assigned to BSC profile. 
+#ifndef BSC_CHANNEL_NUM
+#define BSC_CHANNEL_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 0
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 0
+#endif
+
+// <o> DISPLAY_TYPE  - Type of received data
+ 
+// <121=> Combined data 
+// <122=> Cadence data 
+// <123=> Speed data 
+
+#ifndef DISPLAY_TYPE
+#define DISPLAY_TYPE 121
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Board Support 
+
+//==========================================================
+// <e> BSP_BTN_ANT_ENABLED - bsp_btn_ant - Button Control for ANT
+//==========================================================
+#ifndef BSP_BTN_ANT_ENABLED
+#define BSP_BTN_ANT_ENABLED 1
+#endif
+// <o> BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID - Wakeup button ID. 
+#ifndef BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID
+#define BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID 3
+#endif
+
+// <o> BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID - Sleep button ID. 
+#ifndef BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID
+#define BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID 3
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <e> ANT_BSC_ENABLED - ant_bsc - Bicycle Speed and Cadence Profile
+//==========================================================
+#ifndef ANT_BSC_ENABLED
+#define ANT_BSC_ENABLED 1
+#endif
+// <e> ANT_BSC_LOG_ENABLED - Enables general logging in the module.
+//==========================================================
+#ifndef ANT_BSC_LOG_ENABLED
+#define ANT_BSC_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_LOG_LEVEL
+#define ANT_BSC_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_INFO_COLOR
+#define ANT_BSC_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED - Enables logging of BSC Combined page 0 in the module.
+//==========================================================
+#ifndef ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED
+#define ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL
+#define ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_COMBINED_PAGE_0_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_COMBINED_PAGE_0_INFO_COLOR
+#define ANT_BSC_COMBINED_PAGE_0_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_0_LOG_ENABLED - Enables logging of BSC page 0 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_0_LOG_ENABLED
+#define ANT_BSC_PAGE_0_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_0_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_0_LOG_LEVEL
+#define ANT_BSC_PAGE_0_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_0_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_0_INFO_COLOR
+#define ANT_BSC_PAGE_0_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_1_LOG_ENABLED - Enables logging of BSC page 1 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_1_LOG_ENABLED
+#define ANT_BSC_PAGE_1_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_1_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_1_LOG_LEVEL
+#define ANT_BSC_PAGE_1_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_1_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_1_INFO_COLOR
+#define ANT_BSC_PAGE_1_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_2_LOG_ENABLED - Enables logging of BSC page 2 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_2_LOG_ENABLED
+#define ANT_BSC_PAGE_2_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_2_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_2_LOG_LEVEL
+#define ANT_BSC_PAGE_2_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_2_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_2_INFO_COLOR
+#define ANT_BSC_PAGE_2_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_3_LOG_ENABLED - Enables logging of BSC page 3 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_3_LOG_ENABLED
+#define ANT_BSC_PAGE_3_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_3_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_3_LOG_LEVEL
+#define ANT_BSC_PAGE_3_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_3_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_3_INFO_COLOR
+#define ANT_BSC_PAGE_3_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_4_LOG_ENABLED - Enables logging of BSC page 4 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_4_LOG_ENABLED
+#define ANT_BSC_PAGE_4_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_4_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_4_LOG_LEVEL
+#define ANT_BSC_PAGE_4_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_4_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_4_INFO_COLOR
+#define ANT_BSC_PAGE_4_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_5_LOG_ENABLED - Enables logging of BSC page 5 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_5_LOG_ENABLED
+#define ANT_BSC_PAGE_5_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_5_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_5_LOG_LEVEL
+#define ANT_BSC_PAGE_5_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_5_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_5_INFO_COLOR
+#define ANT_BSC_PAGE_5_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <q> ANT_KEY_MANAGER_ENABLED  - ant_key_manager - Software Component
+ 
+
+#ifndef ANT_KEY_MANAGER_ENABLED
+#define ANT_KEY_MANAGER_ENABLED 1
+#endif
+
+// <e> ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP
+//==========================================================
+#ifndef ANT_STATE_INDICATOR_ENABLED
+#define ANT_STATE_INDICATOR_ENABLED 1
+#endif
+// <o> ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY - Shutdown observer priority. 
+#ifndef ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY
+#define ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/iar/ant_bsc_rx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/iar/ant_bsc_rx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/iar/ant_bsc_rx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/iar/ant_bsc_rx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/iar/ant_bsc_rx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..872a3b2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/iar/ant_bsc_rx_d52_starterkit_s212.ewp
@@ -0,0 +1,1102 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_bsc_rx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_bsc_rx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_bsc_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\ant_bsc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_combined_page_0.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_0.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_1.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_2.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_3.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_4.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_5.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/iar/ant_bsc_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/iar/ant_bsc_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/iar/ant_bsc_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/ses/ant_bsc_rx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/ses/ant_bsc_rx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..f149d73
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/ses/ant_bsc_rx_d52_starterkit_s212.emProject
@@ -0,0 +1,117 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_bsc_rx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_bsc_rx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_key_manager;../../../../../../../../components/ant/ant_key_manager/config;../../../../../../../../components/ant/ant_profiles/ant_bsc;../../../../../../../../components/ant/ant_profiles/ant_bsc/pages;../../../../../../../../components/ant/ant_profiles/ant_bsc/utils;../../../../../../../../components/ant/ant_state_indicator;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/mutex;../../../../../../../../components/libraries/pwr_mgmt;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/ant_bsc.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_combined_page_0.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_0.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_1.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_2.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_3.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_4.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_5.c" />
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" />
+      <file file_name="../../../../../../../../components/ant/ant_state_indicator/ant_state_indicator.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp_btn_ant.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/ses/ant_bsc_rx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/ses/ant_bsc_rx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..08fe664
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/ses/ant_bsc_rx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_bsc_rx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..93f065c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/main.c
new file mode 100644
index 0000000..cfd865b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/main.c
@@ -0,0 +1,399 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2012
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @defgroup ant_bsc_rx_example ANT BSC RX example
+ * @{
+ * @ingroup nrf_ant_bsc
+ *
+ * @brief Example of ANT BSC RX profile.
+ *
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdio.h>
+#include "nrf.h"
+#include "bsp.h"
+#include "hardfault.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "nrf_pwr_mgmt.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "ant_key_manager.h"
+#include "ant_bsc.h"
+#include "bsp_btn_ant.h"
+#include "ant_state_indicator.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+#define WHEEL_CIRCUMFERENCE         2070                                                            /**< Bike wheel circumference [mm] */
+#define BSC_EVT_TIME_FACTOR         1024                                                            /**< Time unit factor for BSC events */
+#define BSC_RPM_TIME_FACTOR         60                                                              /**< Time unit factor for RPM unit */
+#define BSC_MS_TO_KPH_NUM           36                                                              /**< Numerator of [m/s] to [kph] ratio */
+#define BSC_MS_TO_KPH_DEN           10                                                              /**< Denominator of [m/s] to [kph] ratio */
+#define BSC_MM_TO_M_FACTOR          1000                                                            /**< Unit factor [m/s] to [mm/s] */
+#define SPEED_COEFFICIENT           (WHEEL_CIRCUMFERENCE * BSC_EVT_TIME_FACTOR * BSC_MS_TO_KPH_NUM \
+                                     / BSC_MS_TO_KPH_DEN / BSC_MM_TO_M_FACTOR)                      /**< Coefficient for speed value calculation */
+#define CADENCE_COEFFICIENT         (BSC_EVT_TIME_FACTOR * BSC_RPM_TIME_FACTOR)                     /**< Coefficient for cadence value calculation */
+
+#define APP_ANT_OBSERVER_PRIO       1                                                               /**< Application's ANT observer priority. You shouldn't need to modify this value. */
+
+typedef struct
+{
+    int32_t acc_rev_cnt;
+    int32_t prev_rev_cnt;
+    int32_t prev_acc_rev_cnt;
+    int32_t acc_evt_time;
+    int32_t prev_evt_time;
+    int32_t prev_acc_evt_time;
+} bsc_disp_calc_data_t;
+
+static bsc_disp_calc_data_t m_speed_calc_data   = {0};
+static bsc_disp_calc_data_t m_cadence_calc_data = {0};
+
+/** @snippet [ANT BSC RX Instance] */
+void ant_bsc_evt_handler(ant_bsc_profile_t * p_profile, ant_bsc_evt_t event);
+
+BSC_DISP_CHANNEL_CONFIG_DEF(m_ant_bsc,
+                            BSC_CHANNEL_NUM,
+                            CHAN_ID_TRANS_TYPE,
+                            DISPLAY_TYPE,
+                            CHAN_ID_DEV_NUM,
+                            ANTPLUS_NETWORK_NUM,
+                            BSC_MSG_PERIOD_4Hz);
+BSC_DISP_PROFILE_CONFIG_DEF(m_ant_bsc,
+                            ant_bsc_evt_handler);
+
+static ant_bsc_profile_t m_ant_bsc;
+
+NRF_SDH_ANT_OBSERVER(m_bsc_ant_observer, ANT_BSC_ANT_OBSERVER_PRIO,
+                     ant_bsc_disp_evt_handler, &m_ant_bsc);
+
+/** @snippet [ANT BSC RX Instance] */
+
+static uint32_t calculate_speed(int32_t rev_cnt, int32_t evt_time)
+{
+    static uint32_t computed_speed   = 0;
+
+    if (rev_cnt != m_speed_calc_data.prev_rev_cnt)
+    {
+        m_speed_calc_data.acc_rev_cnt  += rev_cnt - m_speed_calc_data.prev_rev_cnt;
+        m_speed_calc_data.acc_evt_time += evt_time - m_speed_calc_data.prev_evt_time;
+
+        /* Process rollover */
+        if (m_speed_calc_data.prev_rev_cnt > rev_cnt)
+        {
+            m_speed_calc_data.acc_rev_cnt += UINT16_MAX + 1;
+        }
+        if (m_speed_calc_data.prev_evt_time > evt_time)
+        {
+            m_speed_calc_data.acc_evt_time += UINT16_MAX + 1;
+        }
+
+        m_speed_calc_data.prev_rev_cnt  = rev_cnt;
+        m_speed_calc_data.prev_evt_time = evt_time;
+
+        computed_speed = SPEED_COEFFICIENT *
+                         (m_speed_calc_data.acc_rev_cnt  - m_speed_calc_data.prev_acc_rev_cnt) /
+                         (m_speed_calc_data.acc_evt_time - m_speed_calc_data.prev_acc_evt_time);
+
+        m_speed_calc_data.prev_acc_rev_cnt  = m_speed_calc_data.acc_rev_cnt;
+        m_speed_calc_data.prev_acc_evt_time = m_speed_calc_data.acc_evt_time;
+    }
+
+    return (uint32_t)computed_speed;
+}
+
+static uint32_t calculate_cadence(int32_t rev_cnt, int32_t evt_time)
+{
+    static uint32_t computed_cadence = 0;
+
+    if (rev_cnt != m_cadence_calc_data.prev_rev_cnt)
+    {
+        m_cadence_calc_data.acc_rev_cnt  += rev_cnt - m_cadence_calc_data.prev_rev_cnt;
+        m_cadence_calc_data.acc_evt_time += evt_time - m_cadence_calc_data.prev_evt_time;
+
+        /* Process rollover */
+        if (m_cadence_calc_data.prev_rev_cnt > rev_cnt)
+        {
+            m_cadence_calc_data.acc_rev_cnt += UINT16_MAX + 1;
+        }
+        if (m_cadence_calc_data.prev_evt_time > evt_time)
+        {
+            m_cadence_calc_data.acc_evt_time += UINT16_MAX + 1;
+        }
+
+        m_cadence_calc_data.prev_rev_cnt  = rev_cnt;
+        m_cadence_calc_data.prev_evt_time = evt_time;
+
+        computed_cadence = CADENCE_COEFFICIENT *
+                        (m_cadence_calc_data.acc_rev_cnt  - m_cadence_calc_data.prev_acc_rev_cnt) /
+                        (m_cadence_calc_data.acc_evt_time - m_cadence_calc_data.prev_acc_evt_time);
+
+        m_cadence_calc_data.prev_acc_rev_cnt  = m_cadence_calc_data.acc_rev_cnt;
+        m_cadence_calc_data.prev_acc_evt_time = m_cadence_calc_data.acc_evt_time;
+    }
+
+    return (uint32_t)computed_cadence;
+}
+
+/**@brief Function for handling a ANT stack event.
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+static void ant_evt_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    switch (p_ant_evt->event)
+    {
+        case EVENT_RX_FAIL_GO_TO_SEARCH:
+            /* Reset speed and cadence values */
+            memset(&m_speed_calc_data, 0, sizeof(m_speed_calc_data));
+            memset(&m_cadence_calc_data, 0, sizeof(m_cadence_calc_data));
+            break;
+
+        default:
+            // No implementation needed
+            break;
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, APP_ANT_OBSERVER_PRIO, ant_evt_handler, NULL);
+
+void ant_bsc_evt_handler(ant_bsc_profile_t * p_profile, ant_bsc_evt_t event)
+{
+    switch (event)
+    {
+        case ANT_BSC_PAGE_0_UPDATED:
+            /* fall through */
+        case ANT_BSC_PAGE_1_UPDATED:
+            /* fall through */
+        case ANT_BSC_PAGE_2_UPDATED:
+            /* fall through */
+        case ANT_BSC_PAGE_3_UPDATED:
+            /* fall through */
+        case ANT_BSC_PAGE_4_UPDATED:
+            /* fall through */
+        case ANT_BSC_PAGE_5_UPDATED:
+            /* Log computed value */
+
+            if (DISPLAY_TYPE == BSC_SPEED_DEVICE_TYPE)
+            {
+                NRF_LOG_INFO("Computed speed value:                 %u kph",
+                              (unsigned int) calculate_speed(p_profile->BSC_PROFILE_rev_count,
+                                                             p_profile->BSC_PROFILE_event_time));
+            }
+            else if (DISPLAY_TYPE == BSC_CADENCE_DEVICE_TYPE)
+            {
+                NRF_LOG_INFO("Computed cadence value:               %u rpm",
+                              (unsigned int) calculate_cadence(p_profile->BSC_PROFILE_rev_count,
+                                                               p_profile->BSC_PROFILE_event_time));
+            }
+            break;
+
+        case ANT_BSC_COMB_PAGE_0_UPDATED:
+            NRF_LOG_INFO("Computed speed value:                         %u kph",
+                          (unsigned int) calculate_speed(p_profile->BSC_PROFILE_speed_rev_count,
+                                                         p_profile->BSC_PROFILE_speed_event_time));
+            NRF_LOG_INFO("Computed cadence value:                       %u rpms",
+                          (unsigned int) calculate_cadence(p_profile->BSC_PROFILE_cadence_rev_count,
+                                                           p_profile->BSC_PROFILE_cadence_event_time));
+            break;
+
+        default:
+            break;
+    }
+}
+
+/**@brief Function for handling events from the BSP module.
+ *
+ * @param[in]   event   Event generated by BSP.
+ */
+void bsp_event_handler(bsp_event_t event)
+{
+    switch (event)
+    {
+        case BSP_EVENT_SLEEP:
+            nrf_pwr_mgmt_shutdown(NRF_PWR_MGMT_SHUTDOWN_GOTO_SYSOFF);
+            break;
+
+        default:
+            break;
+    }
+}
+
+/**
+ * @brief Function for shutdown events.
+ *
+ * @param[in]   event       Shutdown type.
+ */
+static bool shutdown_handler(nrf_pwr_mgmt_evt_t event)
+{
+    ret_code_t err_code;
+
+    switch (event)
+    {
+        case NRF_PWR_MGMT_EVT_PREPARE_WAKEUP:
+            err_code = bsp_btn_ant_sleep_mode_prepare();
+            APP_ERROR_CHECK(err_code);
+            break;
+
+        default:
+            break;
+    }
+
+    return true;
+}
+
+NRF_PWR_MGMT_HANDLER_REGISTER(shutdown_handler,  APP_SHUTDOWN_HANDLER_PRIORITY);
+
+/**@brief Function for the Timer and BSP initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                        bsp_event_handler);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_btn_ant_init(m_ant_bsc.channel_number, BSC_DISP_CHANNEL_TYPE);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_state_indicator_init(m_ant_bsc.channel_number, BSC_DISP_CHANNEL_TYPE);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**@brief Function for ANT stack initialization.
+ *
+ * @details Initializes the SoftDevice and the ANT event interrupt.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_plus_key_set(ANTPLUS_NETWORK_NUM);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**@brief Function for BSC profile initialization.
+ *
+ * @details Initializes the BSC profile and open ANT channel.
+ */
+static void profile_setup(void)
+{
+/** @snippet [ANT BSC RX Profile Setup] */
+    uint32_t err_code;
+
+    err_code = ant_bsc_disp_init(&m_ant_bsc,
+                                 BSC_DISP_CHANNEL_CONFIG(m_ant_bsc),
+                                 BSC_DISP_PROFILE_CONFIG(m_ant_bsc));
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_bsc_disp_open(&m_ant_bsc);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_state_indicator_channel_opened();
+    APP_ERROR_CHECK(err_code);
+/** @snippet [ANT BSC RX Profile Setup] */
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for application main entry, does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    profile_setup();
+
+    NRF_LOG_INFO("ANT+ Bicycle Speed and Cadence RX example started.");
+
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
+
+
+/**
+ *@}
+ **/
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/arm4/ant_bsc_rx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/arm4/ant_bsc_rx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/arm4/ant_bsc_rx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/arm4/ant_bsc_rx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/arm4/ant_bsc_rx_pca10040_s212.uvproj
new file mode 100644
index 0000000..bea0249
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/arm4/ant_bsc_rx_pca10040_s212.uvproj
@@ -0,0 +1,581 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>            <File>
+              <FileName>bsp_btn_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_bsc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\ant_bsc.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_combined_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_combined_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_4.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_4.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_5.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_5.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/arm5_no_packs/ant_bsc_rx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/arm5_no_packs/ant_bsc_rx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/arm5_no_packs/ant_bsc_rx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/arm5_no_packs/ant_bsc_rx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/arm5_no_packs/ant_bsc_rx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..2b40759
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/arm5_no_packs/ant_bsc_rx_pca10040_s212.uvprojx
@@ -0,0 +1,605 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>            <File>
+              <FileName>bsp_btn_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_bsc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\ant_bsc.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_combined_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_combined_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_4.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_4.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_5.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_5.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..1e777c3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,207 @@
+PROJECT_NAME     := ant_bsc_rx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_bsc_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/ant_bsc.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_combined_page_0.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_0.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_1.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_2.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_3.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_4.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_5.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \
+  $(SDK_ROOT)/components/ant/ant_state_indicator/ant_state_indicator.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp_btn_ant.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/ant/ant_key_manager \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages \
+  ../config \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/components/ant/ant_state_indicator \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/ant/ant_key_manager/config \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/utils \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/timer \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/armgcc/ant_bsc_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/armgcc/ant_bsc_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..840d4d1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/armgcc/ant_bsc_rx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..59fe736
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,4200 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANTPLUS_NETWORK_NUM - ANT PLUS network number. 
+#ifndef ANTPLUS_NETWORK_NUM
+#define ANTPLUS_NETWORK_NUM 0
+#endif
+
+// <o> APP_SHUTDOWN_HANDLER_PRIORITY - Application shutdown observer priority. 
+#ifndef APP_SHUTDOWN_HANDLER_PRIORITY
+#define APP_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// <o> BSC_CHANNEL_NUM - Channel number assigned to BSC profile. 
+#ifndef BSC_CHANNEL_NUM
+#define BSC_CHANNEL_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 0
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 0
+#endif
+
+// <o> DISPLAY_TYPE  - Type of received data
+ 
+// <121=> Combined data 
+// <122=> Cadence data 
+// <123=> Speed data 
+
+#ifndef DISPLAY_TYPE
+#define DISPLAY_TYPE 121
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Board Support 
+
+//==========================================================
+// <e> BSP_BTN_ANT_ENABLED - bsp_btn_ant - Button Control for ANT
+//==========================================================
+#ifndef BSP_BTN_ANT_ENABLED
+#define BSP_BTN_ANT_ENABLED 1
+#endif
+// <o> BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID - Wakeup button ID. 
+#ifndef BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID
+#define BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID 3
+#endif
+
+// <o> BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID - Sleep button ID. 
+#ifndef BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID
+#define BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID 3
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <e> ANT_BSC_ENABLED - ant_bsc - Bicycle Speed and Cadence Profile
+//==========================================================
+#ifndef ANT_BSC_ENABLED
+#define ANT_BSC_ENABLED 1
+#endif
+// <e> ANT_BSC_LOG_ENABLED - Enables general logging in the module.
+//==========================================================
+#ifndef ANT_BSC_LOG_ENABLED
+#define ANT_BSC_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_LOG_LEVEL
+#define ANT_BSC_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_INFO_COLOR
+#define ANT_BSC_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED - Enables logging of BSC Combined page 0 in the module.
+//==========================================================
+#ifndef ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED
+#define ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL
+#define ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_COMBINED_PAGE_0_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_COMBINED_PAGE_0_INFO_COLOR
+#define ANT_BSC_COMBINED_PAGE_0_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_0_LOG_ENABLED - Enables logging of BSC page 0 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_0_LOG_ENABLED
+#define ANT_BSC_PAGE_0_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_0_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_0_LOG_LEVEL
+#define ANT_BSC_PAGE_0_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_0_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_0_INFO_COLOR
+#define ANT_BSC_PAGE_0_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_1_LOG_ENABLED - Enables logging of BSC page 1 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_1_LOG_ENABLED
+#define ANT_BSC_PAGE_1_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_1_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_1_LOG_LEVEL
+#define ANT_BSC_PAGE_1_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_1_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_1_INFO_COLOR
+#define ANT_BSC_PAGE_1_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_2_LOG_ENABLED - Enables logging of BSC page 2 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_2_LOG_ENABLED
+#define ANT_BSC_PAGE_2_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_2_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_2_LOG_LEVEL
+#define ANT_BSC_PAGE_2_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_2_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_2_INFO_COLOR
+#define ANT_BSC_PAGE_2_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_3_LOG_ENABLED - Enables logging of BSC page 3 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_3_LOG_ENABLED
+#define ANT_BSC_PAGE_3_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_3_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_3_LOG_LEVEL
+#define ANT_BSC_PAGE_3_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_3_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_3_INFO_COLOR
+#define ANT_BSC_PAGE_3_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_4_LOG_ENABLED - Enables logging of BSC page 4 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_4_LOG_ENABLED
+#define ANT_BSC_PAGE_4_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_4_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_4_LOG_LEVEL
+#define ANT_BSC_PAGE_4_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_4_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_4_INFO_COLOR
+#define ANT_BSC_PAGE_4_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_5_LOG_ENABLED - Enables logging of BSC page 5 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_5_LOG_ENABLED
+#define ANT_BSC_PAGE_5_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_5_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_5_LOG_LEVEL
+#define ANT_BSC_PAGE_5_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_5_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_5_INFO_COLOR
+#define ANT_BSC_PAGE_5_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <q> ANT_KEY_MANAGER_ENABLED  - ant_key_manager - Software Component
+ 
+
+#ifndef ANT_KEY_MANAGER_ENABLED
+#define ANT_KEY_MANAGER_ENABLED 1
+#endif
+
+// <e> ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP
+//==========================================================
+#ifndef ANT_STATE_INDICATOR_ENABLED
+#define ANT_STATE_INDICATOR_ENABLED 1
+#endif
+// <o> ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY - Shutdown observer priority. 
+#ifndef ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY
+#define ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/iar/ant_bsc_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/iar/ant_bsc_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/iar/ant_bsc_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/iar/ant_bsc_rx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/iar/ant_bsc_rx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/iar/ant_bsc_rx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/iar/ant_bsc_rx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/iar/ant_bsc_rx_pca10040_s212.ewp
new file mode 100644
index 0000000..30df68a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/iar/ant_bsc_rx_pca10040_s212.ewp
@@ -0,0 +1,1105 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_bsc_rx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_bsc_rx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_bsc_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\ant_bsc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_combined_page_0.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_0.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_1.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_2.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_3.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_4.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_5.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/ses/ant_bsc_rx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/ses/ant_bsc_rx_pca10040_s212.emProject
new file mode 100644
index 0000000..d87c273
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/ses/ant_bsc_rx_pca10040_s212.emProject
@@ -0,0 +1,116 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_bsc_rx_pca10040_s212" target="8" version="2">
+  <project Name="ant_bsc_rx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_key_manager;../../../../../../../../components/ant/ant_key_manager/config;../../../../../../../../components/ant/ant_profiles/ant_bsc;../../../../../../../../components/ant/ant_profiles/ant_bsc/pages;../../../../../../../../components/ant/ant_profiles/ant_bsc/utils;../../../../../../../../components/ant/ant_state_indicator;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/mutex;../../../../../../../../components/libraries/pwr_mgmt;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/ant_bsc.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_combined_page_0.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_0.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_1.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_2.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_3.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_4.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_5.c" />
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" />
+      <file file_name="../../../../../../../../components/ant/ant_state_indicator/ant_state_indicator.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp_btn_ant.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/ses/ant_bsc_rx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/ses/ant_bsc_rx_pca10040_s212.emSession
new file mode 100644
index 0000000..3e11410
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/ses/ant_bsc_rx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_bsc_rx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..d32ea27
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_rx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/ant_bsc_tx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/ant_bsc_tx.eww
new file mode 100644
index 0000000..1d8d88b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/ant_bsc_tx.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_bsc_tx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_bsc_tx_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/bsc_cadence_rx_device_profile.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/bsc_cadence_rx_device_profile.xml
new file mode 100644
index 0000000..50255c6
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/bsc_cadence_rx_device_profile.xml
@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleChannelProfile>
+  <!--ANTWare_II Single Channel Profile - Created:2015-09-18 13:39:16-->
+  <ChannelProfile>
+    <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+    <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+    <networkNum type="System.Byte">0</networkNum>
+    <deviceNumber type="System.UInt16">0</deviceNumber>
+    <pairingOn type="System.Boolean">false</pairingOn>
+    <deviceType type="System.Byte">122</deviceType>
+    <transmissionType type="System.Byte">0</transmissionType>
+    <msgPeriod type="System.UInt16">8102</msgPeriod>
+    <radioFreq type="System.Byte">57</radioFreq>
+    <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+    <searchTimeout type="System.Byte">10</searchTimeout>
+    <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+  </ChannelProfile>
+</SingleChannelProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/bsc_combined_rx_device_profile.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/bsc_combined_rx_device_profile.xml
new file mode 100644
index 0000000..e645fe5
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/bsc_combined_rx_device_profile.xml
@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleChannelProfile>
+  <!--ANTWare_II Single Channel Profile - Created:2015-09-18 13:42:52-->
+  <ChannelProfile>
+    <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+    <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+    <networkNum type="System.Byte">0</networkNum>
+    <deviceNumber type="System.UInt16">0</deviceNumber>
+    <pairingOn type="System.Boolean">false</pairingOn>
+    <deviceType type="System.Byte">121</deviceType>
+    <transmissionType type="System.Byte">0</transmissionType>
+    <msgPeriod type="System.UInt16">8086</msgPeriod>
+    <radioFreq type="System.Byte">57</radioFreq>
+    <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+    <searchTimeout type="System.Byte">10</searchTimeout>
+    <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+  </ChannelProfile>
+</SingleChannelProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/bsc_speed_rx_device_profile.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/bsc_speed_rx_device_profile.xml
new file mode 100644
index 0000000..0cc0e54
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/bsc_speed_rx_device_profile.xml
@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleChannelProfile>
+  <!--ANTWare_II Single Channel Profile - Created:2015-09-18 12:44:19-->
+  <ChannelProfile>
+    <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+    <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+    <networkNum type="System.Byte">0</networkNum>
+    <deviceNumber type="System.UInt16">0</deviceNumber>
+    <pairingOn type="System.Boolean">false</pairingOn>
+    <deviceType type="System.Byte">123</deviceType>
+    <transmissionType type="System.Byte">0</transmissionType>
+    <msgPeriod type="System.UInt16">8118</msgPeriod>
+    <radioFreq type="System.Byte">57</radioFreq>
+    <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+    <searchTimeout type="System.Byte">10</searchTimeout>
+    <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+  </ChannelProfile>
+</SingleChannelProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/arm4/ant_bsc_tx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/arm4/ant_bsc_tx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/arm4/ant_bsc_tx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/arm4/ant_bsc_tx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/arm4/ant_bsc_tx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..d7de672
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/arm4/ant_bsc_tx_d52_starterkit_s212.uvproj
@@ -0,0 +1,587 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_bsc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\ant_bsc.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_combined_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_combined_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_4.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_4.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_5.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_5.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\simulator\ant_bsc_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/arm5_no_packs/ant_bsc_tx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/arm5_no_packs/ant_bsc_tx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/arm5_no_packs/ant_bsc_tx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/arm5_no_packs/ant_bsc_tx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/arm5_no_packs/ant_bsc_tx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..6ecac2f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/arm5_no_packs/ant_bsc_tx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,611 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_bsc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\ant_bsc.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_combined_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_combined_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_4.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_4.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_5.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_5.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\simulator\ant_bsc_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..620d2b3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,207 @@
+PROJECT_NAME     := ant_bsc_tx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_bsc_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/components/libraries/sensorsim/sensorsim.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/ant_bsc.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_combined_page_0.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_0.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_1.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_2.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_3.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_4.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_5.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/simulator/ant_bsc_simulator.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \
+  $(SDK_ROOT)/components/ant/ant_state_indicator/ant_state_indicator.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components/libraries/sensorsim \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/ant/ant_key_manager \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/simulator \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages \
+  ../config \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/components/ant/ant_state_indicator \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/ant/ant_key_manager/config \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/utils \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/timer \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/armgcc/ant_bsc_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/armgcc/ant_bsc_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..1b5cea2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/armgcc/ant_bsc_tx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..106f771
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,4270 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANTPLUS_NETWORK_NUM - ANT PLUS network number. 
+#ifndef ANTPLUS_NETWORK_NUM
+#define ANTPLUS_NETWORK_NUM 0
+#endif
+
+// <o> BSC_CHANNEL_NUM - Channel number assigned to BSC profile. 
+#ifndef BSC_CHANNEL_NUM
+#define BSC_CHANNEL_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 49
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> MODIFICATION_TYPE  - Type of speed and cadence values update
+ 
+
+// <i> They can be updated by buttons or periodically rise and fall in auto mode
+// <0=> MODIFICATION_TYPE_BUTTON 
+// <1=> MODIFICATION_TYPE_AUTO 
+
+#ifndef MODIFICATION_TYPE
+#define MODIFICATION_TYPE 0
+#endif
+
+// <h> PRODUCT_INFORMATION 
+
+//==========================================================
+// <o> BSC_HW_VERSION - Hardware revision 
+#ifndef BSC_HW_VERSION
+#define BSC_HW_VERSION 5
+#endif
+
+// <o> BSC_MF_ID - Manufacturer ID 
+#ifndef BSC_MF_ID
+#define BSC_MF_ID 2
+#endif
+
+// <o> BSC_MODEL_NUMBER - Model number 
+#ifndef BSC_MODEL_NUMBER
+#define BSC_MODEL_NUMBER 2
+#endif
+
+// <o> BSC_SW_VERSION - Software version number 
+#ifndef BSC_SW_VERSION
+#define BSC_SW_VERSION 0
+#endif
+
+// <o> BSC_SERIAL_NUMBER - Serial number 
+#ifndef BSC_SERIAL_NUMBER
+#define BSC_SERIAL_NUMBER 43981
+#endif
+
+// </h> 
+//==========================================================
+
+// <o> SENSOR_TYPE  - Type of transmitted data
+ 
+// <121=> Combined data 
+// <122=> Cadence data 
+// <123=> Speed data 
+
+#ifndef SENSOR_TYPE
+#define SENSOR_TYPE 121
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <e> ANT_BSC_ENABLED - ant_bsc - Bicycle Speed and Cadence Profile
+//==========================================================
+#ifndef ANT_BSC_ENABLED
+#define ANT_BSC_ENABLED 1
+#endif
+// <e> ANT_BSC_LOG_ENABLED - Enables general logging in the module.
+//==========================================================
+#ifndef ANT_BSC_LOG_ENABLED
+#define ANT_BSC_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_LOG_LEVEL
+#define ANT_BSC_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_INFO_COLOR
+#define ANT_BSC_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED - Enables logging of BSC Combined page 0 in the module.
+//==========================================================
+#ifndef ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED
+#define ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL
+#define ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_COMBINED_PAGE_0_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_COMBINED_PAGE_0_INFO_COLOR
+#define ANT_BSC_COMBINED_PAGE_0_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_0_LOG_ENABLED - Enables logging of BSC page 0 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_0_LOG_ENABLED
+#define ANT_BSC_PAGE_0_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_0_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_0_LOG_LEVEL
+#define ANT_BSC_PAGE_0_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_0_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_0_INFO_COLOR
+#define ANT_BSC_PAGE_0_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_1_LOG_ENABLED - Enables logging of BSC page 1 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_1_LOG_ENABLED
+#define ANT_BSC_PAGE_1_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_1_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_1_LOG_LEVEL
+#define ANT_BSC_PAGE_1_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_1_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_1_INFO_COLOR
+#define ANT_BSC_PAGE_1_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_2_LOG_ENABLED - Enables logging of BSC page 2 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_2_LOG_ENABLED
+#define ANT_BSC_PAGE_2_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_2_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_2_LOG_LEVEL
+#define ANT_BSC_PAGE_2_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_2_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_2_INFO_COLOR
+#define ANT_BSC_PAGE_2_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_3_LOG_ENABLED - Enables logging of BSC page 3 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_3_LOG_ENABLED
+#define ANT_BSC_PAGE_3_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_3_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_3_LOG_LEVEL
+#define ANT_BSC_PAGE_3_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_3_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_3_INFO_COLOR
+#define ANT_BSC_PAGE_3_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_4_LOG_ENABLED - Enables logging of BSC page 4 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_4_LOG_ENABLED
+#define ANT_BSC_PAGE_4_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_4_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_4_LOG_LEVEL
+#define ANT_BSC_PAGE_4_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_4_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_4_INFO_COLOR
+#define ANT_BSC_PAGE_4_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_5_LOG_ENABLED - Enables logging of BSC page 5 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_5_LOG_ENABLED
+#define ANT_BSC_PAGE_5_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_5_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_5_LOG_LEVEL
+#define ANT_BSC_PAGE_5_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_5_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_5_INFO_COLOR
+#define ANT_BSC_PAGE_5_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <q> ANT_KEY_MANAGER_ENABLED  - ant_key_manager - Software Component
+ 
+
+#ifndef ANT_KEY_MANAGER_ENABLED
+#define ANT_KEY_MANAGER_ENABLED 1
+#endif
+
+// <e> ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP
+//==========================================================
+#ifndef ANT_STATE_INDICATOR_ENABLED
+#define ANT_STATE_INDICATOR_ENABLED 1
+#endif
+// <o> ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY - Shutdown observer priority. 
+#ifndef ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY
+#define ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/iar/ant_bsc_tx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/iar/ant_bsc_tx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/iar/ant_bsc_tx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/iar/ant_bsc_tx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/iar/ant_bsc_tx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..bce2a9d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/iar/ant_bsc_tx_d52_starterkit_s212.ewp
@@ -0,0 +1,1107 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_bsc_tx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_bsc_tx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_bsc_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\ant_bsc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_combined_page_0.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_0.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_1.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_2.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_3.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_4.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_5.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\simulator\ant_bsc_simulator.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/iar/ant_bsc_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/iar/ant_bsc_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/iar/ant_bsc_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/ses/ant_bsc_tx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/ses/ant_bsc_tx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..b091177
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/ses/ant_bsc_tx_d52_starterkit_s212.emProject
@@ -0,0 +1,118 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_bsc_tx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_bsc_tx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_key_manager;../../../../../../../../components/ant/ant_key_manager/config;../../../../../../../../components/ant/ant_profiles/ant_bsc;../../../../../../../../components/ant/ant_profiles/ant_bsc/pages;../../../../../../../../components/ant/ant_profiles/ant_bsc/simulator;../../../../../../../../components/ant/ant_profiles/ant_bsc/utils;../../../../../../../../components/ant/ant_state_indicator;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/mutex;../../../../../../../../components/libraries/pwr_mgmt;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/sensorsim;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+      <file file_name="../../../../../../../../components/libraries/sensorsim/sensorsim.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/ant_bsc.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_combined_page_0.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_0.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_1.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_2.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_3.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_4.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_5.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/simulator/ant_bsc_simulator.c" />
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" />
+      <file file_name="../../../../../../../../components/ant/ant_state_indicator/ant_state_indicator.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/ses/ant_bsc_tx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/ses/ant_bsc_tx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..7280419
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/ses/ant_bsc_tx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_bsc_tx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..93f065c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/main.c
new file mode 100644
index 0000000..3a127fc
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/main.c
@@ -0,0 +1,305 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2012
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @defgroup ant_bsc_tx_main ANT BSC TX example
+ * @{
+ * @ingroup nrf_ant_bsc
+ *
+ * @brief Example of ANT BSC TX profile.
+ *
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdio.h>
+#include "nrf.h"
+#include "bsp.h"
+#include "hardfault.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "nrf_pwr_mgmt.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "ant_key_manager.h"
+#include "ant_bsc.h"
+#include "ant_bsc_simulator.h"
+#include "ant_state_indicator.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+#define MODIFICATION_TYPE_BUTTON 0 /* predefined value, MUST REMAIN UNCHANGED */
+#define MODIFICATION_TYPE_AUTO   1 /* predefined value, MUST REMAIN UNCHANGED */
+
+#if (MODIFICATION_TYPE != MODIFICATION_TYPE_BUTTON) \
+    && (MODIFICATION_TYPE != MODIFICATION_TYPE_AUTO)
+    #error Unsupported value of MODIFICATION_TYPE.
+#endif
+
+#define BSC_CHANNEL_NUMBER      0x00    /**< Channel number assigned to BSC profile. */
+#define ANTPLUS_NETWORK_NUMBER  0       /**< Network number. */
+
+/** @snippet [ANT BSC TX Instance] */
+void ant_bsc_evt_handler(ant_bsc_profile_t * p_profile, ant_bsc_evt_t event);
+
+BSC_SENS_CHANNEL_CONFIG_DEF(m_ant_bsc,
+                            BSC_CHANNEL_NUM,
+                            CHAN_ID_TRANS_TYPE,
+                            SENSOR_TYPE,
+                            CHAN_ID_DEV_NUM,
+                            ANTPLUS_NETWORK_NUM);
+BSC_SENS_PROFILE_CONFIG_DEF(m_ant_bsc,
+                            true,
+                            true,
+                            ANT_BSC_PAGE_5,
+                            ant_bsc_evt_handler);
+
+static ant_bsc_profile_t m_ant_bsc;
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, ANT_BSC_ANT_OBSERVER_PRIO,
+                     ant_bsc_sens_evt_handler, &m_ant_bsc);
+
+/** @snippet [ANT BSC TX Instance] */
+
+static ant_bsc_simulator_t  m_ant_bsc_simulator;    /**< Simulator used to simulate profile data. */
+
+#if MODIFICATION_TYPE == MODIFICATION_TYPE_BUTTON
+/**@brief Function for handling bsp events.
+ */
+/** @snippet [ANT BSC simulator button] */
+void bsp_evt_handler(bsp_event_t evt)
+{
+    switch (evt)
+    {
+        case BSP_EVENT_KEY_0:
+            ant_bsc_simulator_increment(&m_ant_bsc_simulator);
+            break;
+
+        case BSP_EVENT_KEY_1:
+            ant_bsc_simulator_decrement(&m_ant_bsc_simulator);
+            break;
+
+        default:
+            return; // no implementation needed
+    }
+}
+/** @snippet [ANT BSC simulator button] */
+#endif // MODIFICATION_TYPE == MODIFICATION_TYPE_BUTTON
+
+/**
+ * @brief Function for setup all thinks not directly associated witch ANT stack/protocol.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+
+    // Initialize and start a single continuous mode timer, which is used to update the event time
+    // on the main data page.
+    err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    #if (MODIFICATION_TYPE == MODIFICATION_TYPE_BUTTON)
+    /** @snippet [ANT Pulse simulator button init] */
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                        bsp_evt_handler);
+    APP_ERROR_CHECK(err_code);
+    /** @snippet [ANT Pulse simulator button init] */
+    #else
+    err_code = bsp_init(BSP_INIT_LEDS, NULL);
+    APP_ERROR_CHECK(err_code);
+    #endif
+
+    err_code = ant_state_indicator_init(m_ant_bsc.channel_number, BSC_SENS_CHANNEL_TYPE);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for the BSC simulator initialization.
+ */
+static void simulator_setup(void)
+{
+    /** @snippet [ANT BSC simulator init] */
+    const ant_bsc_simulator_cfg_t simulator_cfg =
+    {
+        .p_profile      = &m_ant_bsc,
+        .device_type    = SENSOR_TYPE,
+    };
+    /** @snippet [ANT BSC simulator init] */
+
+#if MODIFICATION_TYPE == MODIFICATION_TYPE_AUTO
+    /** @snippet [ANT BSC simulator auto init] */
+    ant_bsc_simulator_init(&m_ant_bsc_simulator, &simulator_cfg, true);
+    /** @snippet [ANT BSC simulator auto init] */
+#else
+    /** @snippet [ANT BSC simulator button init] */
+    ant_bsc_simulator_init(&m_ant_bsc_simulator, &simulator_cfg, false);
+    /** @snippet [ANT BSC simulator button init] */
+#endif
+}
+
+/**
+ * @brief Function for ANT stack initialization.
+ *
+ * @details Initializes the SoftDevice and the ANT event interrupt.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_plus_key_set(ANTPLUS_NETWORK_NUM);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for handling ANT BSC events.
+ */
+/** @snippet [ANT BSC simulator call] */
+void ant_bsc_evt_handler(ant_bsc_profile_t * p_profile, ant_bsc_evt_t event)
+{
+    nrf_pwr_mgmt_feed();
+
+    switch (event)
+    {
+        case ANT_BSC_PAGE_0_UPDATED:
+            /* fall through */
+        case ANT_BSC_PAGE_1_UPDATED:
+            /* fall through */
+        case ANT_BSC_PAGE_2_UPDATED:
+            /* fall through */
+        case ANT_BSC_PAGE_3_UPDATED:
+            /* fall through */
+        case ANT_BSC_PAGE_4_UPDATED:
+            /* fall through */
+        case ANT_BSC_PAGE_5_UPDATED:
+            /* fall through */
+        case ANT_BSC_COMB_PAGE_0_UPDATED:
+            ant_bsc_simulator_one_iteration(&m_ant_bsc_simulator);
+            break;
+
+        default:
+            break;
+    }
+}
+
+/** @snippet [ANT BSC simulator call] */
+
+/**
+ * @brief Function for BSC profile initialization.
+ *
+ * @details Initializes the BSC profile and open ANT channel.
+ */
+static void profile_setup(void)
+{
+/** @snippet [ANT BSC TX Profile Setup] */
+    uint32_t err_code;
+
+    err_code = ant_bsc_sens_init(&m_ant_bsc,
+                                 BSC_SENS_CHANNEL_CONFIG(m_ant_bsc),
+                                 BSC_SENS_PROFILE_CONFIG(m_ant_bsc));
+    APP_ERROR_CHECK(err_code);
+
+    m_ant_bsc.BSC_PROFILE_manuf_id     = BSC_MF_ID;
+    m_ant_bsc.BSC_PROFILE_serial_num   = BSC_SERIAL_NUMBER;
+    m_ant_bsc.BSC_PROFILE_hw_version   = BSC_HW_VERSION;
+    m_ant_bsc.BSC_PROFILE_sw_version   = BSC_SW_VERSION;
+    m_ant_bsc.BSC_PROFILE_model_num    = BSC_MODEL_NUMBER;
+
+    err_code = ant_bsc_sens_open(&m_ant_bsc);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_state_indicator_channel_opened();
+    APP_ERROR_CHECK(err_code);
+/** @snippet [ANT BSC TX Profile Setup] */
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for application main entry, does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    simulator_setup();
+    profile_setup();
+
+    NRF_LOG_INFO("ANT+ Bicycle Speed and Cadence TX example started.");
+
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
+
+
+/**
+ *@}
+ **/
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/arm4/ant_bsc_tx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/arm4/ant_bsc_tx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/arm4/ant_bsc_tx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/arm4/ant_bsc_tx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/arm4/ant_bsc_tx_pca10040_s212.uvproj
new file mode 100644
index 0000000..a6691d8
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/arm4/ant_bsc_tx_pca10040_s212.uvproj
@@ -0,0 +1,584 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_bsc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\ant_bsc.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_combined_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_combined_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_4.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_4.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_5.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_5.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\simulator\ant_bsc_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/arm5_no_packs/ant_bsc_tx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/arm5_no_packs/ant_bsc_tx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/arm5_no_packs/ant_bsc_tx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/arm5_no_packs/ant_bsc_tx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/arm5_no_packs/ant_bsc_tx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..f50528e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/arm5_no_packs/ant_bsc_tx_pca10040_s212.uvprojx
@@ -0,0 +1,608 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_bsc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\ant_bsc.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_combined_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_combined_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_4.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_4.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_page_5.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_5.c</FilePath>            </File>            <File>
+              <FileName>ant_bsc_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\simulator\ant_bsc_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..7d1fc18
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,210 @@
+PROJECT_NAME     := ant_bsc_tx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_bsc_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/components/libraries/sensorsim/sensorsim.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/ant_bsc.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_combined_page_0.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_0.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_1.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_2.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_3.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_4.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_5.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/simulator/ant_bsc_simulator.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \
+  $(SDK_ROOT)/components/ant/ant_state_indicator/ant_state_indicator.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components/libraries/sensorsim \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/ant/ant_key_manager \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/simulator \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/pages \
+  ../config \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/components/ant/ant_state_indicator \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/ant/ant_key_manager/config \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_bsc/utils \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/timer \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/armgcc/ant_bsc_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/armgcc/ant_bsc_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..840d4d1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/armgcc/ant_bsc_tx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..9477ea6
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,4214 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANTPLUS_NETWORK_NUM - ANT PLUS network number. 
+#ifndef ANTPLUS_NETWORK_NUM
+#define ANTPLUS_NETWORK_NUM 0
+#endif
+
+// <o> BSC_CHANNEL_NUM - Channel number assigned to BSC profile. 
+#ifndef BSC_CHANNEL_NUM
+#define BSC_CHANNEL_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 49
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> MODIFICATION_TYPE  - Type of speed and cadence values update
+ 
+
+// <i> They can be updated by buttons or periodically rise and fall in auto mode
+// <0=> MODIFICATION_TYPE_BUTTON 
+// <1=> MODIFICATION_TYPE_AUTO 
+
+#ifndef MODIFICATION_TYPE
+#define MODIFICATION_TYPE 0
+#endif
+
+// <h> PRODUCT_INFORMATION 
+
+//==========================================================
+// <o> BSC_HW_VERSION - Hardware revision 
+#ifndef BSC_HW_VERSION
+#define BSC_HW_VERSION 5
+#endif
+
+// <o> BSC_MF_ID - Manufacturer ID 
+#ifndef BSC_MF_ID
+#define BSC_MF_ID 2
+#endif
+
+// <o> BSC_MODEL_NUMBER - Model number 
+#ifndef BSC_MODEL_NUMBER
+#define BSC_MODEL_NUMBER 2
+#endif
+
+// <o> BSC_SW_VERSION - Software version number 
+#ifndef BSC_SW_VERSION
+#define BSC_SW_VERSION 0
+#endif
+
+// <o> BSC_SERIAL_NUMBER - Serial number 
+#ifndef BSC_SERIAL_NUMBER
+#define BSC_SERIAL_NUMBER 43981
+#endif
+
+// </h> 
+//==========================================================
+
+// <o> SENSOR_TYPE  - Type of transmitted data
+ 
+// <121=> Combined data 
+// <122=> Cadence data 
+// <123=> Speed data 
+
+#ifndef SENSOR_TYPE
+#define SENSOR_TYPE 121
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <e> ANT_BSC_ENABLED - ant_bsc - Bicycle Speed and Cadence Profile
+//==========================================================
+#ifndef ANT_BSC_ENABLED
+#define ANT_BSC_ENABLED 1
+#endif
+// <e> ANT_BSC_LOG_ENABLED - Enables general logging in the module.
+//==========================================================
+#ifndef ANT_BSC_LOG_ENABLED
+#define ANT_BSC_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_LOG_LEVEL
+#define ANT_BSC_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_INFO_COLOR
+#define ANT_BSC_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED - Enables logging of BSC Combined page 0 in the module.
+//==========================================================
+#ifndef ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED
+#define ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL
+#define ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_COMBINED_PAGE_0_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_COMBINED_PAGE_0_INFO_COLOR
+#define ANT_BSC_COMBINED_PAGE_0_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_0_LOG_ENABLED - Enables logging of BSC page 0 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_0_LOG_ENABLED
+#define ANT_BSC_PAGE_0_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_0_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_0_LOG_LEVEL
+#define ANT_BSC_PAGE_0_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_0_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_0_INFO_COLOR
+#define ANT_BSC_PAGE_0_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_1_LOG_ENABLED - Enables logging of BSC page 1 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_1_LOG_ENABLED
+#define ANT_BSC_PAGE_1_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_1_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_1_LOG_LEVEL
+#define ANT_BSC_PAGE_1_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_1_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_1_INFO_COLOR
+#define ANT_BSC_PAGE_1_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_2_LOG_ENABLED - Enables logging of BSC page 2 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_2_LOG_ENABLED
+#define ANT_BSC_PAGE_2_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_2_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_2_LOG_LEVEL
+#define ANT_BSC_PAGE_2_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_2_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_2_INFO_COLOR
+#define ANT_BSC_PAGE_2_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_3_LOG_ENABLED - Enables logging of BSC page 3 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_3_LOG_ENABLED
+#define ANT_BSC_PAGE_3_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_3_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_3_LOG_LEVEL
+#define ANT_BSC_PAGE_3_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_3_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_3_INFO_COLOR
+#define ANT_BSC_PAGE_3_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_4_LOG_ENABLED - Enables logging of BSC page 4 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_4_LOG_ENABLED
+#define ANT_BSC_PAGE_4_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_4_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_4_LOG_LEVEL
+#define ANT_BSC_PAGE_4_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_4_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_4_INFO_COLOR
+#define ANT_BSC_PAGE_4_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_BSC_PAGE_5_LOG_ENABLED - Enables logging of BSC page 5 in the module.
+//==========================================================
+#ifndef ANT_BSC_PAGE_5_LOG_ENABLED
+#define ANT_BSC_PAGE_5_LOG_ENABLED 1
+#endif
+// <o> ANT_BSC_PAGE_5_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_BSC_PAGE_5_LOG_LEVEL
+#define ANT_BSC_PAGE_5_LOG_LEVEL 3
+#endif
+
+// <o> ANT_BSC_PAGE_5_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_BSC_PAGE_5_INFO_COLOR
+#define ANT_BSC_PAGE_5_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <q> ANT_KEY_MANAGER_ENABLED  - ant_key_manager - Software Component
+ 
+
+#ifndef ANT_KEY_MANAGER_ENABLED
+#define ANT_KEY_MANAGER_ENABLED 1
+#endif
+
+// <e> ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP
+//==========================================================
+#ifndef ANT_STATE_INDICATOR_ENABLED
+#define ANT_STATE_INDICATOR_ENABLED 1
+#endif
+// <o> ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY - Shutdown observer priority. 
+#ifndef ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY
+#define ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/iar/ant_bsc_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/iar/ant_bsc_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/iar/ant_bsc_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/iar/ant_bsc_tx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/iar/ant_bsc_tx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/iar/ant_bsc_tx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/iar/ant_bsc_tx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/iar/ant_bsc_tx_pca10040_s212.ewp
new file mode 100644
index 0000000..dad1a66
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/iar/ant_bsc_tx_pca10040_s212.ewp
@@ -0,0 +1,1110 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_bsc_tx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_bsc_tx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_bsc_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\ant_bsc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_combined_page_0.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_0.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_1.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_2.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_3.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_4.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\pages\ant_bsc_page_5.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_bsc\simulator\ant_bsc_simulator.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/ses/ant_bsc_tx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/ses/ant_bsc_tx_pca10040_s212.emProject
new file mode 100644
index 0000000..253bbb2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/ses/ant_bsc_tx_pca10040_s212.emProject
@@ -0,0 +1,117 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_bsc_tx_pca10040_s212" target="8" version="2">
+  <project Name="ant_bsc_tx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_key_manager;../../../../../../../../components/ant/ant_key_manager/config;../../../../../../../../components/ant/ant_profiles/ant_bsc;../../../../../../../../components/ant/ant_profiles/ant_bsc/pages;../../../../../../../../components/ant/ant_profiles/ant_bsc/simulator;../../../../../../../../components/ant/ant_profiles/ant_bsc/utils;../../../../../../../../components/ant/ant_state_indicator;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/mutex;../../../../../../../../components/libraries/pwr_mgmt;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/sensorsim;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+      <file file_name="../../../../../../../../components/libraries/sensorsim/sensorsim.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/ant_bsc.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_combined_page_0.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_0.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_1.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_2.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_3.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_4.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/pages/ant_bsc_page_5.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_bsc/simulator/ant_bsc_simulator.c" />
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" />
+      <file file_name="../../../../../../../../components/ant/ant_state_indicator/ant_state_indicator.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/ses/ant_bsc_tx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/ses/ant_bsc_tx_pca10040_s212.emSession
new file mode 100644
index 0000000..7584fe0
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/ses/ant_bsc_tx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_bsc_tx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..d32ea27
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_bsc/bsc_tx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/ant_hrm_rx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/ant_hrm_rx.eww
new file mode 100644
index 0000000..85314e5
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/ant_hrm_rx.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_hrm_rx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_hrm_rx_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/arm4/ant_hrm_rx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/arm4/ant_hrm_rx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/arm4/ant_hrm_rx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/arm4/ant_hrm_rx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/arm4/ant_hrm_rx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..4236623
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/arm4/ant_hrm_rx_d52_starterkit_s212.uvproj
@@ -0,0 +1,584 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>            <File>
+              <FileName>bsp_btn_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\ant_hrm.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_4.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_4.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator\ant_hrm_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/arm5_no_packs/ant_hrm_rx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/arm5_no_packs/ant_hrm_rx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/arm5_no_packs/ant_hrm_rx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/arm5_no_packs/ant_hrm_rx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/arm5_no_packs/ant_hrm_rx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..7481712
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/arm5_no_packs/ant_hrm_rx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,608 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>            <File>
+              <FileName>bsp_btn_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\ant_hrm.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_4.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_4.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator\ant_hrm_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..0a3b675
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,204 @@
+PROJECT_NAME     := ant_hrm_rx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_hrm_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/components/libraries/sensorsim/sensorsim.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/ant_hrm.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_0.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_1.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_2.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_3.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_4.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/simulator/ant_hrm_simulator.c \
+  $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \
+  $(SDK_ROOT)/components/ant/ant_state_indicator/ant_state_indicator.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp_btn_ant.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components/libraries/sensorsim \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/ant/ant_key_manager \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/simulator \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  ../config \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/utils \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/components/ant/ant_state_indicator \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/ant/ant_key_manager/config \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/armgcc/ant_hrm_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/armgcc/ant_hrm_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..1b5cea2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/armgcc/ant_hrm_rx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..1db3b25
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,4176 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANTPLUS_NETWORK_NUM - ANT PLUS network number. 
+#ifndef ANTPLUS_NETWORK_NUM
+#define ANTPLUS_NETWORK_NUM 0
+#endif
+
+// <o> APP_SHUTDOWN_HANDLER_PRIORITY - Application shutdown observer priority. 
+#ifndef APP_SHUTDOWN_HANDLER_PRIORITY
+#define APP_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 0
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 0
+#endif
+
+// <o> HRM_CHANNEL_NUM - Channel number assigned to HRM profile. 
+#ifndef HRM_CHANNEL_NUM
+#define HRM_CHANNEL_NUM 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Board Support 
+
+//==========================================================
+// <e> BSP_BTN_ANT_ENABLED - bsp_btn_ant - Button Control for ANT
+//==========================================================
+#ifndef BSP_BTN_ANT_ENABLED
+#define BSP_BTN_ANT_ENABLED 1
+#endif
+// <o> BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID - Wakeup button ID. 
+#ifndef BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID
+#define BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID 3
+#endif
+
+// <o> BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID - Sleep button ID. 
+#ifndef BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID
+#define BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID 3
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_HRM_ENABLED - ant_hrm - Heart Rate Monitor Profile
+//==========================================================
+#ifndef ANT_HRM_ENABLED
+#define ANT_HRM_ENABLED 1
+#endif
+// <e> ANT_HRM_LOG_ENABLED - Enables general logging in the module.
+//==========================================================
+#ifndef ANT_HRM_LOG_ENABLED
+#define ANT_HRM_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_LOG_LEVEL
+#define ANT_HRM_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_INFO_COLOR
+#define ANT_HRM_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_0_LOG_ENABLED - Enables logging of HRM page 0 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_0_LOG_ENABLED
+#define ANT_HRM_PAGE_0_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_0_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_0_LOG_LEVEL
+#define ANT_HRM_PAGE_0_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_0_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_0_INFO_COLOR
+#define ANT_HRM_PAGE_0_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_1_LOG_ENABLED - Enables logging of HRM page 1 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_1_LOG_ENABLED
+#define ANT_HRM_PAGE_1_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_1_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_1_LOG_LEVEL
+#define ANT_HRM_PAGE_1_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_1_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_1_INFO_COLOR
+#define ANT_HRM_PAGE_1_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_2_LOG_ENABLED - Enables logging of HRM page 2 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_2_LOG_ENABLED
+#define ANT_HRM_PAGE_2_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_2_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_2_LOG_LEVEL
+#define ANT_HRM_PAGE_2_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_2_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_2_INFO_COLOR
+#define ANT_HRM_PAGE_2_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_3_LOG_ENABLED - Enables logging of HRM page 3 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_3_LOG_ENABLED
+#define ANT_HRM_PAGE_3_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_3_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_3_LOG_LEVEL
+#define ANT_HRM_PAGE_3_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_3_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_3_INFO_COLOR
+#define ANT_HRM_PAGE_3_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_4_LOG_ENABLED - Enables logging of HRM page 4 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_4_LOG_ENABLED
+#define ANT_HRM_PAGE_4_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_4_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_4_LOG_LEVEL
+#define ANT_HRM_PAGE_4_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_4_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_4_INFO_COLOR
+#define ANT_HRM_PAGE_4_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_KEY_MANAGER_ENABLED  - ant_key_manager - Software Component
+ 
+
+#ifndef ANT_KEY_MANAGER_ENABLED
+#define ANT_KEY_MANAGER_ENABLED 1
+#endif
+
+// <e> ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP
+//==========================================================
+#ifndef ANT_STATE_INDICATOR_ENABLED
+#define ANT_STATE_INDICATOR_ENABLED 1
+#endif
+// <o> ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY - Shutdown observer priority. 
+#ifndef ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY
+#define ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/iar/ant_hrm_rx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/iar/ant_hrm_rx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/iar/ant_hrm_rx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/iar/ant_hrm_rx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/iar/ant_hrm_rx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..574e2bb
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/iar/ant_hrm_rx_d52_starterkit_s212.ewp
@@ -0,0 +1,1104 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_hrm_rx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_hrm_rx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_hrm_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\ant_hrm.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_0.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_1.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_2.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_3.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_4.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator\ant_hrm_simulator.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/iar/ant_hrm_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/iar/ant_hrm_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/iar/ant_hrm_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/ses/ant_hrm_rx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/ses/ant_hrm_rx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..14ec896
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/ses/ant_hrm_rx_d52_starterkit_s212.emProject
@@ -0,0 +1,117 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_hrm_rx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_hrm_rx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_key_manager;../../../../../../../../components/ant/ant_key_manager/config;../../../../../../../../components/ant/ant_profiles/ant_hrm;../../../../../../../../components/ant/ant_profiles/ant_hrm/pages;../../../../../../../../components/ant/ant_profiles/ant_hrm/simulator;../../../../../../../../components/ant/ant_profiles/ant_hrm/utils;../../../../../../../../components/ant/ant_state_indicator;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/mutex;../../../../../../../../components/libraries/pwr_mgmt;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/sensorsim;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+      <file file_name="../../../../../../../../components/libraries/sensorsim/sensorsim.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/ant_hrm.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_0.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_1.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_2.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_3.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_4.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/simulator/ant_hrm_simulator.c" />
+      <file file_name="../../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" />
+      <file file_name="../../../../../../../../components/ant/ant_state_indicator/ant_state_indicator.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp_btn_ant.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/ses/ant_hrm_rx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/ses/ant_hrm_rx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..178131c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/ses/ant_hrm_rx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_hrm_rx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..93f065c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/main.c
new file mode 100644
index 0000000..b9da8fe
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/main.c
@@ -0,0 +1,253 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2012
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @defgroup ant_hrm_rx_example ANT HRM RX example
+ * @{
+ * @ingroup nrf_ant_hrm
+ *
+ * @brief Example of ANT HRM RX profile.
+ *
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdio.h>
+#include "nrf.h"
+#include "bsp.h"
+#include "hardfault.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "nrf_pwr_mgmt.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "ant_key_manager.h"
+#include "ant_hrm.h"
+#include "bsp_btn_ant.h"
+#include "ant_state_indicator.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+/** @snippet [ANT HRM RX Instance] */
+HRM_DISP_CHANNEL_CONFIG_DEF(m_ant_hrm,
+                            HRM_CHANNEL_NUM,
+                            CHAN_ID_TRANS_TYPE,
+                            CHAN_ID_DEV_NUM,
+                            ANTPLUS_NETWORK_NUM,
+                            HRM_MSG_PERIOD_4Hz);
+
+static ant_hrm_profile_t m_ant_hrm;
+/** @snippet [ANT HRM RX Instance] */
+
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, ANT_HRM_ANT_OBSERVER_PRIO,
+                     ant_hrm_disp_evt_handler, &m_ant_hrm);
+
+static void ant_hrm_evt_handler(ant_hrm_profile_t * p_profile, ant_hrm_evt_t event)
+{
+    nrf_pwr_mgmt_feed();
+
+    switch (event)
+    {
+        case ANT_HRM_PAGE_0_UPDATED:
+            /* fall through */
+        case ANT_HRM_PAGE_1_UPDATED:
+            /* fall through */
+        case ANT_HRM_PAGE_2_UPDATED:
+            /* fall through */
+        case ANT_HRM_PAGE_3_UPDATED:
+            /* fall through */
+        case ANT_HRM_PAGE_4_UPDATED:
+            NRF_LOG_INFO("Page was updated");
+            break;
+
+        default:
+            break;
+    }
+}
+
+/**@brief Function for handling events from the BSP module.
+ *
+ * @param[in]   event   Event generated by BSP.
+ */
+void bsp_event_handler(bsp_event_t event)
+{
+    switch (event)
+    {
+        case BSP_EVENT_SLEEP:
+            nrf_pwr_mgmt_shutdown(NRF_PWR_MGMT_SHUTDOWN_GOTO_SYSOFF);
+            break;
+
+        default:
+            break;
+    }
+}
+
+/**
+ * @brief Function for shutdown events.
+ *
+ * @param[in]   event       Shutdown type.
+ */
+static bool shutdown_handler(nrf_pwr_mgmt_evt_t event)
+{
+    ret_code_t err_code;
+
+    switch (event)
+    {
+        case NRF_PWR_MGMT_EVT_PREPARE_WAKEUP:
+            err_code = bsp_btn_ant_sleep_mode_prepare();
+            APP_ERROR_CHECK(err_code);
+            break;
+
+        default:
+            break;
+    }
+
+    return true;
+}
+
+NRF_PWR_MGMT_HANDLER_REGISTER(shutdown_handler, APP_SHUTDOWN_HANDLER_PRIORITY);
+
+/**@brief Function for the Timer and BSP initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                        bsp_event_handler);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_btn_ant_init(m_ant_hrm.channel_number, HRM_DISP_CHANNEL_TYPE);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_state_indicator_init(m_ant_hrm.channel_number, HRM_DISP_CHANNEL_TYPE);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for ANT stack initialization.
+ *
+ * @details Initializes the SoftDevice and the ANT event interrupt.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_plus_key_set(ANTPLUS_NETWORK_NUM);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for HRM profile initialization.
+ *
+ * @details Initializes the HRM profile and open ANT channel.
+ */
+static void profile_setup(void)
+{
+/** @snippet [ANT HRM RX Profile Setup] */
+    ret_code_t err_code =
+        ant_hrm_disp_init(&m_ant_hrm, HRM_DISP_CHANNEL_CONFIG(m_ant_hrm), ant_hrm_evt_handler);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_hrm_disp_open(&m_ant_hrm);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_state_indicator_channel_opened();
+    APP_ERROR_CHECK(err_code);
+/** @snippet [ANT HRM RX Profile Setup] */
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for application main entry, does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    profile_setup();
+
+    NRF_LOG_INFO("ANT+ Heart Rate RX example started.");
+
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
+
+
+/**
+ *@}
+ **/
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/arm4/ant_hrm_rx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/arm4/ant_hrm_rx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/arm4/ant_hrm_rx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/arm4/ant_hrm_rx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/arm4/ant_hrm_rx_pca10040_s212.uvproj
new file mode 100644
index 0000000..ef8b5fc
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/arm4/ant_hrm_rx_pca10040_s212.uvproj
@@ -0,0 +1,581 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>            <File>
+              <FileName>bsp_btn_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\ant_hrm.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_4.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_4.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator\ant_hrm_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/arm5_no_packs/ant_hrm_rx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/arm5_no_packs/ant_hrm_rx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/arm5_no_packs/ant_hrm_rx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/arm5_no_packs/ant_hrm_rx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/arm5_no_packs/ant_hrm_rx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..1a47881
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/arm5_no_packs/ant_hrm_rx_pca10040_s212.uvprojx
@@ -0,0 +1,605 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>            <File>
+              <FileName>bsp_btn_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\ant_hrm.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_4.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_4.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator\ant_hrm_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..28c03b4
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,207 @@
+PROJECT_NAME     := ant_hrm_rx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_hrm_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/components/libraries/sensorsim/sensorsim.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/ant_hrm.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_0.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_1.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_2.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_3.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_4.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/simulator/ant_hrm_simulator.c \
+  $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \
+  $(SDK_ROOT)/components/ant/ant_state_indicator/ant_state_indicator.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp_btn_ant.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components/libraries/sensorsim \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/ant/ant_key_manager \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/simulator \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  ../config \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/utils \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/components/ant/ant_state_indicator \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/ant/ant_key_manager/config \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/armgcc/ant_hrm_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/armgcc/ant_hrm_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..840d4d1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/armgcc/ant_hrm_rx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..2192deb
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,4120 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANTPLUS_NETWORK_NUM - ANT PLUS network number. 
+#ifndef ANTPLUS_NETWORK_NUM
+#define ANTPLUS_NETWORK_NUM 0
+#endif
+
+// <o> APP_SHUTDOWN_HANDLER_PRIORITY - Application shutdown observer priority. 
+#ifndef APP_SHUTDOWN_HANDLER_PRIORITY
+#define APP_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 0
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 0
+#endif
+
+// <o> HRM_CHANNEL_NUM - Channel number assigned to HRM profile. 
+#ifndef HRM_CHANNEL_NUM
+#define HRM_CHANNEL_NUM 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Board Support 
+
+//==========================================================
+// <e> BSP_BTN_ANT_ENABLED - bsp_btn_ant - Button Control for ANT
+//==========================================================
+#ifndef BSP_BTN_ANT_ENABLED
+#define BSP_BTN_ANT_ENABLED 1
+#endif
+// <o> BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID - Wakeup button ID. 
+#ifndef BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID
+#define BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID 3
+#endif
+
+// <o> BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID - Sleep button ID. 
+#ifndef BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID
+#define BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID 3
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_HRM_ENABLED - ant_hrm - Heart Rate Monitor Profile
+//==========================================================
+#ifndef ANT_HRM_ENABLED
+#define ANT_HRM_ENABLED 1
+#endif
+// <e> ANT_HRM_LOG_ENABLED - Enables general logging in the module.
+//==========================================================
+#ifndef ANT_HRM_LOG_ENABLED
+#define ANT_HRM_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_LOG_LEVEL
+#define ANT_HRM_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_INFO_COLOR
+#define ANT_HRM_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_0_LOG_ENABLED - Enables logging of HRM page 0 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_0_LOG_ENABLED
+#define ANT_HRM_PAGE_0_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_0_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_0_LOG_LEVEL
+#define ANT_HRM_PAGE_0_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_0_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_0_INFO_COLOR
+#define ANT_HRM_PAGE_0_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_1_LOG_ENABLED - Enables logging of HRM page 1 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_1_LOG_ENABLED
+#define ANT_HRM_PAGE_1_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_1_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_1_LOG_LEVEL
+#define ANT_HRM_PAGE_1_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_1_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_1_INFO_COLOR
+#define ANT_HRM_PAGE_1_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_2_LOG_ENABLED - Enables logging of HRM page 2 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_2_LOG_ENABLED
+#define ANT_HRM_PAGE_2_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_2_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_2_LOG_LEVEL
+#define ANT_HRM_PAGE_2_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_2_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_2_INFO_COLOR
+#define ANT_HRM_PAGE_2_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_3_LOG_ENABLED - Enables logging of HRM page 3 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_3_LOG_ENABLED
+#define ANT_HRM_PAGE_3_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_3_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_3_LOG_LEVEL
+#define ANT_HRM_PAGE_3_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_3_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_3_INFO_COLOR
+#define ANT_HRM_PAGE_3_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_4_LOG_ENABLED - Enables logging of HRM page 4 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_4_LOG_ENABLED
+#define ANT_HRM_PAGE_4_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_4_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_4_LOG_LEVEL
+#define ANT_HRM_PAGE_4_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_4_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_4_INFO_COLOR
+#define ANT_HRM_PAGE_4_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_KEY_MANAGER_ENABLED  - ant_key_manager - Software Component
+ 
+
+#ifndef ANT_KEY_MANAGER_ENABLED
+#define ANT_KEY_MANAGER_ENABLED 1
+#endif
+
+// <e> ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP
+//==========================================================
+#ifndef ANT_STATE_INDICATOR_ENABLED
+#define ANT_STATE_INDICATOR_ENABLED 1
+#endif
+// <o> ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY - Shutdown observer priority. 
+#ifndef ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY
+#define ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/iar/ant_hrm_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/iar/ant_hrm_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/iar/ant_hrm_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/iar/ant_hrm_rx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/iar/ant_hrm_rx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/iar/ant_hrm_rx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/iar/ant_hrm_rx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/iar/ant_hrm_rx_pca10040_s212.ewp
new file mode 100644
index 0000000..6028532
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/iar/ant_hrm_rx_pca10040_s212.ewp
@@ -0,0 +1,1107 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_hrm_rx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_hrm_rx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_hrm_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\ant_hrm.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_0.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_1.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_2.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_3.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_4.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator\ant_hrm_simulator.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/ses/ant_hrm_rx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/ses/ant_hrm_rx_pca10040_s212.emProject
new file mode 100644
index 0000000..29529ab
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/ses/ant_hrm_rx_pca10040_s212.emProject
@@ -0,0 +1,116 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_hrm_rx_pca10040_s212" target="8" version="2">
+  <project Name="ant_hrm_rx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_key_manager;../../../../../../../../components/ant/ant_key_manager/config;../../../../../../../../components/ant/ant_profiles/ant_hrm;../../../../../../../../components/ant/ant_profiles/ant_hrm/pages;../../../../../../../../components/ant/ant_profiles/ant_hrm/simulator;../../../../../../../../components/ant/ant_profiles/ant_hrm/utils;../../../../../../../../components/ant/ant_state_indicator;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/mutex;../../../../../../../../components/libraries/pwr_mgmt;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/sensorsim;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+      <file file_name="../../../../../../../../components/libraries/sensorsim/sensorsim.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/ant_hrm.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_0.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_1.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_2.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_3.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_4.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/simulator/ant_hrm_simulator.c" />
+      <file file_name="../../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" />
+      <file file_name="../../../../../../../../components/ant/ant_state_indicator/ant_state_indicator.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp_btn_ant.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/ses/ant_hrm_rx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/ses/ant_hrm_rx_pca10040_s212.emSession
new file mode 100644
index 0000000..57e6ee8
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/ses/ant_hrm_rx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_hrm_rx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..d32ea27
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_rx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/ant_hrm_tx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/ant_hrm_tx.eww
new file mode 100644
index 0000000..f923173
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/ant_hrm_tx.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_hrm_tx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_hrm_tx_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/arm4/ant_hrm_tx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/arm4/ant_hrm_tx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/arm4/ant_hrm_tx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/arm4/ant_hrm_tx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/arm4/ant_hrm_tx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..c745992
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/arm4/ant_hrm_tx_d52_starterkit_s212.uvproj
@@ -0,0 +1,581 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\ant_hrm.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_4.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_4.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator\ant_hrm_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/arm5_no_packs/ant_hrm_tx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/arm5_no_packs/ant_hrm_tx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/arm5_no_packs/ant_hrm_tx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/arm5_no_packs/ant_hrm_tx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/arm5_no_packs/ant_hrm_tx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..965a51d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/arm5_no_packs/ant_hrm_tx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,605 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\ant_hrm.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_4.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_4.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator\ant_hrm_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..7cdfc40
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,203 @@
+PROJECT_NAME     := ant_hrm_tx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_hrm_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/components/libraries/sensorsim/sensorsim.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/ant_hrm.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_0.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_1.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_2.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_3.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_4.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/simulator/ant_hrm_simulator.c \
+  $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \
+  $(SDK_ROOT)/components/ant/ant_state_indicator/ant_state_indicator.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components/libraries/sensorsim \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/ant/ant_key_manager \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/simulator \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  ../config \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/utils \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/components/ant/ant_state_indicator \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/ant/ant_key_manager/config \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/armgcc/ant_hrm_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/armgcc/ant_hrm_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..1b5cea2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/armgcc/ant_hrm_tx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..1b527e4
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,4211 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANTPLUS_NETWORK_NUM - ANT PLUS network number. 
+#ifndef ANTPLUS_NETWORK_NUM
+#define ANTPLUS_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 49
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> HRM_CHANNEL_NUM - Channel number assigned to HRM profile. 
+#ifndef HRM_CHANNEL_NUM
+#define HRM_CHANNEL_NUM 0
+#endif
+
+// <o> MODIFICATION_TYPE  - Type of Heart Rate values update
+ 
+
+// <i> They can be updated by buttons or periodically rise and fall in auto mode
+// <0=> MODIFICATION_TYPE_BUTTON 
+// <1=> MODIFICATION_TYPE_AUTO 
+
+#ifndef MODIFICATION_TYPE
+#define MODIFICATION_TYPE 0
+#endif
+
+// <h> PRODUCT_INFORMATION 
+
+//==========================================================
+// <o> HRM_HW_VERSION - Hardware revision 
+#ifndef HRM_HW_VERSION
+#define HRM_HW_VERSION 5
+#endif
+
+// <o> HRM_MFG_ID - Manufacturer ID 
+#ifndef HRM_MFG_ID
+#define HRM_MFG_ID 2
+#endif
+
+// <o> HRM_MODEL_NUMBER - Model number 
+#ifndef HRM_MODEL_NUMBER
+#define HRM_MODEL_NUMBER 2
+#endif
+
+// <o> HRM_SW_VERSION - Software version number 
+#ifndef HRM_SW_VERSION
+#define HRM_SW_VERSION 0
+#endif
+
+// <o> HRM_SERIAL_NUMBER - Serial number 
+#ifndef HRM_SERIAL_NUMBER
+#define HRM_SERIAL_NUMBER 43981
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SIMULATOR 
+
+//==========================================================
+// <o> SIMULATOR_MIN - Minimal heart rate 
+#ifndef SIMULATOR_MIN
+#define SIMULATOR_MIN 60
+#endif
+
+// <o> SIMULATOR_MAX - Maximal heart rate 
+#ifndef SIMULATOR_MAX
+#define SIMULATOR_MAX 200
+#endif
+
+// <o> SIMULATOR_INCR - Heart rate increment 
+#ifndef SIMULATOR_INCR
+#define SIMULATOR_INCR 2
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_HRM_ENABLED - ant_hrm - Heart Rate Monitor Profile
+//==========================================================
+#ifndef ANT_HRM_ENABLED
+#define ANT_HRM_ENABLED 1
+#endif
+// <e> ANT_HRM_LOG_ENABLED - Enables general logging in the module.
+//==========================================================
+#ifndef ANT_HRM_LOG_ENABLED
+#define ANT_HRM_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_LOG_LEVEL
+#define ANT_HRM_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_INFO_COLOR
+#define ANT_HRM_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_0_LOG_ENABLED - Enables logging of HRM page 0 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_0_LOG_ENABLED
+#define ANT_HRM_PAGE_0_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_0_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_0_LOG_LEVEL
+#define ANT_HRM_PAGE_0_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_0_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_0_INFO_COLOR
+#define ANT_HRM_PAGE_0_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_1_LOG_ENABLED - Enables logging of HRM page 1 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_1_LOG_ENABLED
+#define ANT_HRM_PAGE_1_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_1_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_1_LOG_LEVEL
+#define ANT_HRM_PAGE_1_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_1_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_1_INFO_COLOR
+#define ANT_HRM_PAGE_1_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_2_LOG_ENABLED - Enables logging of HRM page 2 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_2_LOG_ENABLED
+#define ANT_HRM_PAGE_2_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_2_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_2_LOG_LEVEL
+#define ANT_HRM_PAGE_2_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_2_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_2_INFO_COLOR
+#define ANT_HRM_PAGE_2_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_3_LOG_ENABLED - Enables logging of HRM page 3 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_3_LOG_ENABLED
+#define ANT_HRM_PAGE_3_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_3_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_3_LOG_LEVEL
+#define ANT_HRM_PAGE_3_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_3_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_3_INFO_COLOR
+#define ANT_HRM_PAGE_3_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_4_LOG_ENABLED - Enables logging of HRM page 4 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_4_LOG_ENABLED
+#define ANT_HRM_PAGE_4_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_4_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_4_LOG_LEVEL
+#define ANT_HRM_PAGE_4_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_4_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_4_INFO_COLOR
+#define ANT_HRM_PAGE_4_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_KEY_MANAGER_ENABLED  - ant_key_manager - Software Component
+ 
+
+#ifndef ANT_KEY_MANAGER_ENABLED
+#define ANT_KEY_MANAGER_ENABLED 1
+#endif
+
+// <e> ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP
+//==========================================================
+#ifndef ANT_STATE_INDICATOR_ENABLED
+#define ANT_STATE_INDICATOR_ENABLED 1
+#endif
+// <o> ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY - Shutdown observer priority. 
+#ifndef ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY
+#define ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/iar/ant_hrm_tx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/iar/ant_hrm_tx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/iar/ant_hrm_tx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/iar/ant_hrm_tx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/iar/ant_hrm_tx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..63467f3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/iar/ant_hrm_tx_d52_starterkit_s212.ewp
@@ -0,0 +1,1103 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_hrm_tx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_hrm_tx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_hrm_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\ant_hrm.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_0.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_1.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_2.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_3.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_4.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator\ant_hrm_simulator.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/iar/ant_hrm_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/iar/ant_hrm_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/iar/ant_hrm_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/ses/ant_hrm_tx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/ses/ant_hrm_tx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..16c56a5
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/ses/ant_hrm_tx_d52_starterkit_s212.emProject
@@ -0,0 +1,116 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_hrm_tx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_hrm_tx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_key_manager;../../../../../../../../components/ant/ant_key_manager/config;../../../../../../../../components/ant/ant_profiles/ant_hrm;../../../../../../../../components/ant/ant_profiles/ant_hrm/pages;../../../../../../../../components/ant/ant_profiles/ant_hrm/simulator;../../../../../../../../components/ant/ant_profiles/ant_hrm/utils;../../../../../../../../components/ant/ant_state_indicator;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/mutex;../../../../../../../../components/libraries/pwr_mgmt;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/sensorsim;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+      <file file_name="../../../../../../../../components/libraries/sensorsim/sensorsim.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/ant_hrm.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_0.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_1.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_2.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_3.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_4.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/simulator/ant_hrm_simulator.c" />
+      <file file_name="../../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" />
+      <file file_name="../../../../../../../../components/ant/ant_state_indicator/ant_state_indicator.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/ses/ant_hrm_tx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/ses/ant_hrm_tx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..304da68
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/ses/ant_hrm_tx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_hrm_tx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..93f065c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/hrm_rx_device_profile.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/hrm_rx_device_profile.xml
new file mode 100644
index 0000000..a3a27fd
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/hrm_rx_device_profile.xml
@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:2015-05-12 09:33:49-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup />
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">0</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">120</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8070</msgPeriod>
+      <radioFreq type="System.Byte">57</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">34</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">35</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">36</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">37</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">38</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">39</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">40</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/main.c
new file mode 100644
index 0000000..39c4156
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/main.c
@@ -0,0 +1,321 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2012
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @defgroup ant_hrm_tx_main ANT HRM TX example
+ * @{
+ * @ingroup nrf_ant_hrm
+ *
+ * @brief Example of ANT HRM TX profile.
+ *
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdio.h>
+#include "nrf.h"
+#include "bsp.h"
+#include "hardfault.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "nrf_pwr_mgmt.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "ant_key_manager.h"
+#include "ant_hrm.h"
+#include "ant_hrm_simulator.h"
+#include "ant_state_indicator.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+#define MODIFICATION_TYPE_BUTTON 0 /* predefined value, MUST REMAIN UNCHANGED */
+#define MODIFICATION_TYPE_AUTO   1 /* predefined value, MUST REMAIN UNCHANGED */
+
+#if (MODIFICATION_TYPE != MODIFICATION_TYPE_BUTTON) \
+    && (MODIFICATION_TYPE != MODIFICATION_TYPE_AUTO)
+
+    #error Unsupported value of MODIFICATION_TYPE.
+#endif
+
+#define APP_TICK_EVENT_INTERVAL  2000 /**< 2 second's tick event interval in timer tick units. */
+#define HRM_CHANNEL_NUMBER       0x00 /**< Channel number assigned to HRM profile. */
+#define ANTPLUS_NETWORK_NUMBER   0    /**< Network number. */
+
+/** @snippet [ANT HRM TX Instance] */
+void ant_hrm_evt_handler(ant_hrm_profile_t * p_profile, ant_hrm_evt_t event);
+
+HRM_SENS_CHANNEL_CONFIG_DEF(m_ant_hrm,
+                            HRM_CHANNEL_NUM,
+                            CHAN_ID_TRANS_TYPE,
+                            CHAN_ID_DEV_NUM,
+                            ANTPLUS_NETWORK_NUM);
+HRM_SENS_PROFILE_CONFIG_DEF(m_ant_hrm,
+                            true,
+                            ANT_HRM_PAGE_0,
+                            ant_hrm_evt_handler);
+
+static ant_hrm_profile_t m_ant_hrm;
+/** @snippet [ANT HRM TX Instance] */
+
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, ANT_HRM_ANT_OBSERVER_PRIO,
+                     ant_hrm_sens_evt_handler, &m_ant_hrm);
+
+
+static ant_hrm_simulator_t  m_ant_hrm_simulator;    /**< Simulator used to simulate pulse. */
+APP_TIMER_DEF(m_tick_timer);                        /**< Timer used to update cumulative operating time. */
+
+#if MODIFICATION_TYPE == MODIFICATION_TYPE_BUTTON
+/**@brief Function for handling bsp events.
+ */
+/** @snippet [ANT HRM simulator button] */
+void bsp_evt_handler(bsp_event_t evt)
+{
+    switch (evt)
+    {
+        case BSP_EVENT_KEY_0:
+            ant_hrm_simulator_increment(&m_ant_hrm_simulator);
+            break;
+
+        case BSP_EVENT_KEY_1:
+            ant_hrm_simulator_decrement(&m_ant_hrm_simulator);
+            break;
+
+        default:
+            return; // no implementation needed
+    }
+}
+
+/** @snippet [ANT HRM simulator button] */
+#endif // MODIFICATION_TYPE == MODIFICATION_TYPE_BUTTON
+
+/**
+ * @brief 2 seconds tick handler for updataing cumulative operating time.
+ */
+static void app_tick_handler(void * p_context)
+{
+    // Only the first 3 bytes of this value are taken into account
+    m_ant_hrm.HRM_PROFILE_operating_time++;
+}
+
+/**
+ * @brief Function for setup all thinks not directly associated witch ANT stack/protocol.
+ * @desc Initialization of: @n
+ *         - app_timer, presetup for bsp and ant pulse simulation.
+ *         - bsp for signaling leds and user buttons (if use button is enabled in example).
+ *         - ant pulse simulate for task of filling hrm profile data.
+ */
+static void utils_setup(void)
+{
+    // Initialize and start a single continuous mode timer, which is used to update the event time
+    // on the main data page.
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+
+#if (MODIFICATION_TYPE == MODIFICATION_TYPE_BUTTON)
+    /** @snippet [ANT Pulse simulator button init] */
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                        bsp_evt_handler);
+    /** @snippet [ANT Pulse simulator button init] */
+#else
+    err_code = bsp_init(BSP_INIT_LEDS, NULL);
+#endif
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_state_indicator_init(m_ant_hrm.channel_number, HRM_SENS_CHANNEL_TYPE);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = app_timer_create(&m_tick_timer,
+                                APP_TIMER_MODE_REPEATED,
+                                app_tick_handler);
+    APP_ERROR_CHECK(err_code);
+
+    // Schedule a timeout event every 2 seconds
+    err_code = app_timer_start(m_tick_timer, APP_TICK_EVENT_INTERVAL, NULL);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for the HRM simulator initialization.
+ */
+static void simulator_setup(void)
+{
+    /** @snippet [ANT HRM simulator init] */
+    const ant_hrm_simulator_cfg_t simulator_cfg =
+        DEFAULT_ANT_HRM_SIMULATOR_CFG(&m_ant_hrm, SIMULATOR_MIN, SIMULATOR_MAX, SIMULATOR_INCR);
+
+    /** @snippet [ANT HRM simulator init] */
+#if MODIFICATION_TYPE == MODIFICATION_TYPE_AUTO
+    /** @snippet [ANT HRM simulator auto init] */
+    ant_hrm_simulator_init(&m_ant_hrm_simulator, &simulator_cfg, true);
+    /** @snippet [ANT HRM simulator auto init] */
+#else
+    /** @snippet [ANT HRM simulator button init] */
+    ant_hrm_simulator_init(&m_ant_hrm_simulator, &simulator_cfg, false);
+    /** @snippet [ANT HRM simulator button init] */
+#endif
+}
+
+/**
+ * @brief Function for ANT stack initialization.
+ *
+ * @details Initializes the SoftDevice and the ANT event interrupt.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_plus_key_set(ANTPLUS_NETWORK_NUM);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for handling ANT HRM events.
+ */
+/** @snippet [ANT HRM simulator call] */
+void ant_hrm_evt_handler(ant_hrm_profile_t * p_profile, ant_hrm_evt_t event)
+{
+    nrf_pwr_mgmt_feed();
+
+    switch (event)
+    {
+        case ANT_HRM_PAGE_0_UPDATED:
+            /* fall through */
+        case ANT_HRM_PAGE_1_UPDATED:
+            /* fall through */
+        case ANT_HRM_PAGE_2_UPDATED:
+            /* fall through */
+        case ANT_HRM_PAGE_3_UPDATED:
+            /* fall through */
+        case ANT_HRM_PAGE_4_UPDATED:
+            ant_hrm_simulator_one_iteration(&m_ant_hrm_simulator);
+            break;
+
+        default:
+            break;
+    }
+}
+/** @snippet [ANT HRM simulator call] */
+
+/**
+ * @brief Function for HRM profile initialization.
+ *
+ * @details Initializes the HRM profile and open ANT channel.
+ */
+static void profile_setup(void)
+{
+/** @snippet [ANT HRM TX Profile Setup] */
+    ret_code_t err_code;
+
+    err_code = ant_hrm_sens_init(&m_ant_hrm,
+                                 HRM_SENS_CHANNEL_CONFIG(m_ant_hrm),
+                                 HRM_SENS_PROFILE_CONFIG(m_ant_hrm));
+    APP_ERROR_CHECK(err_code);
+
+    m_ant_hrm.HRM_PROFILE_manuf_id   = HRM_MFG_ID;
+    m_ant_hrm.HRM_PROFILE_serial_num = HRM_SERIAL_NUMBER;
+    m_ant_hrm.HRM_PROFILE_hw_version = HRM_HW_VERSION;
+    m_ant_hrm.HRM_PROFILE_sw_version = HRM_SW_VERSION;
+    m_ant_hrm.HRM_PROFILE_model_num  = HRM_MODEL_NUMBER;
+
+    err_code = ant_hrm_sens_open(&m_ant_hrm);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_state_indicator_channel_opened();
+    APP_ERROR_CHECK(err_code);
+/** @snippet [ANT HRM TX Profile Setup] */
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for application main entry, does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    simulator_setup();
+    profile_setup();
+
+    NRF_LOG_INFO("ANT+ Heart Rate TX example started.");
+
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
+
+
+/**
+ *@}
+ **/
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/arm4/ant_hrm_tx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/arm4/ant_hrm_tx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/arm4/ant_hrm_tx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/arm4/ant_hrm_tx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/arm4/ant_hrm_tx_pca10040_s212.uvproj
new file mode 100644
index 0000000..271fc3e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/arm4/ant_hrm_tx_pca10040_s212.uvproj
@@ -0,0 +1,578 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\ant_hrm.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_4.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_4.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator\ant_hrm_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/arm5_no_packs/ant_hrm_tx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/arm5_no_packs/ant_hrm_tx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/arm5_no_packs/ant_hrm_tx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/arm5_no_packs/ant_hrm_tx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/arm5_no_packs/ant_hrm_tx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..2db4235
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/arm5_no_packs/ant_hrm_tx_pca10040_s212.uvprojx
@@ -0,0 +1,602 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\ant_hrm.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_0.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_page_4.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_4.c</FilePath>            </File>            <File>
+              <FileName>ant_hrm_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator\ant_hrm_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..571ab75
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,206 @@
+PROJECT_NAME     := ant_hrm_tx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_hrm_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/components/libraries/sensorsim/sensorsim.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/ant_hrm.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_0.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_1.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_2.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_3.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_4.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/simulator/ant_hrm_simulator.c \
+  $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \
+  $(SDK_ROOT)/components/ant/ant_state_indicator/ant_state_indicator.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components/libraries/sensorsim \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/ant/ant_key_manager \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/simulator \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  ../config \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/utils \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/components/ant/ant_state_indicator \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/ant/ant_key_manager/config \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_hrm/pages \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/armgcc/ant_hrm_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/armgcc/ant_hrm_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..840d4d1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/armgcc/ant_hrm_tx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..2abf1c4
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,4155 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANTPLUS_NETWORK_NUM - ANT PLUS network number. 
+#ifndef ANTPLUS_NETWORK_NUM
+#define ANTPLUS_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 49
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> HRM_CHANNEL_NUM - Channel number assigned to HRM profile. 
+#ifndef HRM_CHANNEL_NUM
+#define HRM_CHANNEL_NUM 0
+#endif
+
+// <o> MODIFICATION_TYPE  - Type of Heart Rate values update
+ 
+
+// <i> They can be updated by buttons or periodically rise and fall in auto mode
+// <0=> MODIFICATION_TYPE_BUTTON 
+// <1=> MODIFICATION_TYPE_AUTO 
+
+#ifndef MODIFICATION_TYPE
+#define MODIFICATION_TYPE 0
+#endif
+
+// <h> PRODUCT_INFORMATION 
+
+//==========================================================
+// <o> HRM_HW_VERSION - Hardware revision 
+#ifndef HRM_HW_VERSION
+#define HRM_HW_VERSION 5
+#endif
+
+// <o> HRM_MFG_ID - Manufacturer ID 
+#ifndef HRM_MFG_ID
+#define HRM_MFG_ID 2
+#endif
+
+// <o> HRM_MODEL_NUMBER - Model number 
+#ifndef HRM_MODEL_NUMBER
+#define HRM_MODEL_NUMBER 2
+#endif
+
+// <o> HRM_SW_VERSION - Software version number 
+#ifndef HRM_SW_VERSION
+#define HRM_SW_VERSION 0
+#endif
+
+// <o> HRM_SERIAL_NUMBER - Serial number 
+#ifndef HRM_SERIAL_NUMBER
+#define HRM_SERIAL_NUMBER 43981
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SIMULATOR 
+
+//==========================================================
+// <o> SIMULATOR_MIN - Minimal heart rate 
+#ifndef SIMULATOR_MIN
+#define SIMULATOR_MIN 60
+#endif
+
+// <o> SIMULATOR_MAX - Maximal heart rate 
+#ifndef SIMULATOR_MAX
+#define SIMULATOR_MAX 200
+#endif
+
+// <o> SIMULATOR_INCR - Heart rate increment 
+#ifndef SIMULATOR_INCR
+#define SIMULATOR_INCR 2
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_HRM_ENABLED - ant_hrm - Heart Rate Monitor Profile
+//==========================================================
+#ifndef ANT_HRM_ENABLED
+#define ANT_HRM_ENABLED 1
+#endif
+// <e> ANT_HRM_LOG_ENABLED - Enables general logging in the module.
+//==========================================================
+#ifndef ANT_HRM_LOG_ENABLED
+#define ANT_HRM_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_LOG_LEVEL
+#define ANT_HRM_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_INFO_COLOR
+#define ANT_HRM_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_0_LOG_ENABLED - Enables logging of HRM page 0 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_0_LOG_ENABLED
+#define ANT_HRM_PAGE_0_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_0_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_0_LOG_LEVEL
+#define ANT_HRM_PAGE_0_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_0_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_0_INFO_COLOR
+#define ANT_HRM_PAGE_0_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_1_LOG_ENABLED - Enables logging of HRM page 1 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_1_LOG_ENABLED
+#define ANT_HRM_PAGE_1_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_1_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_1_LOG_LEVEL
+#define ANT_HRM_PAGE_1_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_1_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_1_INFO_COLOR
+#define ANT_HRM_PAGE_1_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_2_LOG_ENABLED - Enables logging of HRM page 2 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_2_LOG_ENABLED
+#define ANT_HRM_PAGE_2_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_2_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_2_LOG_LEVEL
+#define ANT_HRM_PAGE_2_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_2_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_2_INFO_COLOR
+#define ANT_HRM_PAGE_2_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_3_LOG_ENABLED - Enables logging of HRM page 3 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_3_LOG_ENABLED
+#define ANT_HRM_PAGE_3_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_3_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_3_LOG_LEVEL
+#define ANT_HRM_PAGE_3_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_3_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_3_INFO_COLOR
+#define ANT_HRM_PAGE_3_INFO_COLOR 0
+#endif
+
+// </e>
+
+// <e> ANT_HRM_PAGE_4_LOG_ENABLED - Enables logging of HRM page 4 in the module.
+//==========================================================
+#ifndef ANT_HRM_PAGE_4_LOG_ENABLED
+#define ANT_HRM_PAGE_4_LOG_ENABLED 1
+#endif
+// <o> ANT_HRM_PAGE_4_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_HRM_PAGE_4_LOG_LEVEL
+#define ANT_HRM_PAGE_4_LOG_LEVEL 3
+#endif
+
+// <o> ANT_HRM_PAGE_4_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_HRM_PAGE_4_INFO_COLOR
+#define ANT_HRM_PAGE_4_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_KEY_MANAGER_ENABLED  - ant_key_manager - Software Component
+ 
+
+#ifndef ANT_KEY_MANAGER_ENABLED
+#define ANT_KEY_MANAGER_ENABLED 1
+#endif
+
+// <e> ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP
+//==========================================================
+#ifndef ANT_STATE_INDICATOR_ENABLED
+#define ANT_STATE_INDICATOR_ENABLED 1
+#endif
+// <o> ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY - Shutdown observer priority. 
+#ifndef ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY
+#define ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/iar/ant_hrm_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/iar/ant_hrm_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/iar/ant_hrm_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/iar/ant_hrm_tx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/iar/ant_hrm_tx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/iar/ant_hrm_tx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/iar/ant_hrm_tx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/iar/ant_hrm_tx_pca10040_s212.ewp
new file mode 100644
index 0000000..22e2889
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/iar/ant_hrm_tx_pca10040_s212.ewp
@@ -0,0 +1,1106 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_hrm_tx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_hrm_tx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_hrm_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\ant_hrm.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_0.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_1.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_2.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_3.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\pages\ant_hrm_page_4.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_hrm\simulator\ant_hrm_simulator.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/ses/ant_hrm_tx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/ses/ant_hrm_tx_pca10040_s212.emProject
new file mode 100644
index 0000000..f2ed7be
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/ses/ant_hrm_tx_pca10040_s212.emProject
@@ -0,0 +1,115 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_hrm_tx_pca10040_s212" target="8" version="2">
+  <project Name="ant_hrm_tx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_key_manager;../../../../../../../../components/ant/ant_key_manager/config;../../../../../../../../components/ant/ant_profiles/ant_hrm;../../../../../../../../components/ant/ant_profiles/ant_hrm/pages;../../../../../../../../components/ant/ant_profiles/ant_hrm/simulator;../../../../../../../../components/ant/ant_profiles/ant_hrm/utils;../../../../../../../../components/ant/ant_state_indicator;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/mutex;../../../../../../../../components/libraries/pwr_mgmt;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/sensorsim;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+      <file file_name="../../../../../../../../components/libraries/sensorsim/sensorsim.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/ant_hrm.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_0.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_1.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_2.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_3.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/pages/ant_hrm_page_4.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_hrm/simulator/ant_hrm_simulator.c" />
+      <file file_name="../../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" />
+      <file file_name="../../../../../../../../components/ant/ant_state_indicator/ant_state_indicator.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/ses/ant_hrm_tx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/ses/ant_hrm_tx_pca10040_s212.emSession
new file mode 100644
index 0000000..93d7b67
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/ses/ant_hrm_tx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_hrm_tx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..d32ea27
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_hrm/hrm_tx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/ant_sdm_rx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/ant_sdm_rx.eww
new file mode 100644
index 0000000..1905220
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/ant_sdm_rx.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_sdm_rx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_sdm_rx_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/arm4/ant_sdm_rx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/arm4/ant_sdm_rx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/arm4/ant_sdm_rx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/arm4/ant_sdm_rx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/arm4/ant_sdm_rx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..0f5cc9f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/arm4/ant_sdm_rx_d52_starterkit_s212.uvproj
@@ -0,0 +1,593 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>            <File>
+              <FileName>bsp_btn_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_70.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_70.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_80.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_81.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_request_controller.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller\ant_request_controller.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\ant_sdm.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_common_data.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_common_data.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_16.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_16.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_22.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_22.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/arm5_no_packs/ant_sdm_rx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/arm5_no_packs/ant_sdm_rx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/arm5_no_packs/ant_sdm_rx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/arm5_no_packs/ant_sdm_rx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/arm5_no_packs/ant_sdm_rx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..836cfe0
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/arm5_no_packs/ant_sdm_rx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,617 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>            <File>
+              <FileName>bsp_btn_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_70.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_70.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_80.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_81.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_request_controller.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller\ant_request_controller.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\ant_sdm.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_common_data.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_common_data.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_16.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_16.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_22.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_22.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..bd2ab91
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,209 @@
+PROJECT_NAME     := ant_sdm_rx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_sdm_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_70.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_80.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_81.c \
+  $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/ant_request_controller/ant_request_controller.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/ant_sdm.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_common_data.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_1.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_16.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_2.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_22.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_3.c \
+  $(SDK_ROOT)/components/ant/ant_state_indicator/ant_state_indicator.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp_btn_ant.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/ant/ant_key_manager \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/utils \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/ant_request_controller \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/components/ant/ant_state_indicator \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/ant/ant_key_manager/config \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  ../config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages \
+  $(SDK_ROOT)/components/libraries/timer \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/armgcc/ant_sdm_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/armgcc/ant_sdm_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..1b5cea2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/armgcc/ant_sdm_rx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..c8bee3b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,4134 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANTPLUS_NETWORK_NUM - ANT PLUS network number. 
+#ifndef ANTPLUS_NETWORK_NUM
+#define ANTPLUS_NETWORK_NUM 0
+#endif
+
+// <o> APP_SHUTDOWN_HANDLER_PRIORITY - Application shutdown observer priority. 
+#ifndef APP_SHUTDOWN_HANDLER_PRIORITY
+#define APP_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 0
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 0
+#endif
+
+// <o> SDM_CHANNEL_NUM - Channel number assigned to SDM profile. 
+#ifndef SDM_CHANNEL_NUM
+#define SDM_CHANNEL_NUM 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Board Support 
+
+//==========================================================
+// <e> BSP_BTN_ANT_ENABLED - bsp_btn_ant - Button Control for ANT
+//==========================================================
+#ifndef BSP_BTN_ANT_ENABLED
+#define BSP_BTN_ANT_ENABLED 1
+#endif
+// <o> BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID - Wakeup button ID. 
+#ifndef BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID
+#define BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID 3
+#endif
+
+// <o> BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID - Sleep button ID. 
+#ifndef BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID
+#define BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID 3
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_COMMON_PAGE_70_ENABLED - ant_common_page_70 - ANT+ common page 70
+//==========================================================
+#ifndef ANT_COMMON_PAGE_70_ENABLED
+#define ANT_COMMON_PAGE_70_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_70_LOG_ENABLED - Enables logging of common page 70 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_70_LOG_ENABLED
+#define ANT_COMMON_PAGE_70_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_70_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_70_LOG_LEVEL
+#define ANT_COMMON_PAGE_70_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_70_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_70_INFO_COLOR
+#define ANT_COMMON_PAGE_70_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> ANT_COMMON_PAGE_80_ENABLED - ant_common_page_80 - ANT+ common page 80
+//==========================================================
+#ifndef ANT_COMMON_PAGE_80_ENABLED
+#define ANT_COMMON_PAGE_80_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_80_LOG_ENABLED - Enables logging of common page 80 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_80_LOG_ENABLED
+#define ANT_COMMON_PAGE_80_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_80_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_80_LOG_LEVEL
+#define ANT_COMMON_PAGE_80_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_80_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_80_INFO_COLOR
+#define ANT_COMMON_PAGE_80_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> ANT_COMMON_PAGE_81_ENABLED - ant_common_page_81 - ANT+ common page 81
+//==========================================================
+#ifndef ANT_COMMON_PAGE_81_ENABLED
+#define ANT_COMMON_PAGE_81_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_81_LOG_ENABLED - Enables logging of common page 81 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_81_LOG_ENABLED
+#define ANT_COMMON_PAGE_81_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_81_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_81_LOG_LEVEL
+#define ANT_COMMON_PAGE_81_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_81_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_81_INFO_COLOR
+#define ANT_COMMON_PAGE_81_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_KEY_MANAGER_ENABLED  - ant_key_manager - Software Component
+ 
+
+#ifndef ANT_KEY_MANAGER_ENABLED
+#define ANT_KEY_MANAGER_ENABLED 1
+#endif
+
+// <q> ANT_REQUEST_CONTROLLER_ENABLED  - ant_request_controller - ANT+ request controller
+ 
+
+#ifndef ANT_REQUEST_CONTROLLER_ENABLED
+#define ANT_REQUEST_CONTROLLER_ENABLED 1
+#endif
+
+// <e> ANT_SDM_ENABLED - ant_sdm - Stride Based Speed and Distance Monitor Profile
+//==========================================================
+#ifndef ANT_SDM_ENABLED
+#define ANT_SDM_ENABLED 1
+#endif
+// <e> ANT_SDM_LOG_ENABLED - Enables general logging in the module.
+//==========================================================
+#ifndef ANT_SDM_LOG_ENABLED
+#define ANT_SDM_LOG_ENABLED 1
+#endif
+// <o> ANT_SDM_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_SDM_LOG_LEVEL
+#define ANT_SDM_LOG_LEVEL 3
+#endif
+
+// <o> ANT_SDM_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_SDM_INFO_COLOR
+#define ANT_SDM_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP
+//==========================================================
+#ifndef ANT_STATE_INDICATOR_ENABLED
+#define ANT_STATE_INDICATOR_ENABLED 1
+#endif
+// <o> ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY - Shutdown observer priority. 
+#ifndef ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY
+#define ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/iar/ant_sdm_rx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/iar/ant_sdm_rx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/iar/ant_sdm_rx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/iar/ant_sdm_rx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/iar/ant_sdm_rx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..5925802
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/iar/ant_sdm_rx_d52_starterkit_s212.ewp
@@ -0,0 +1,1109 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_sdm_rx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_sdm_rx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_sdm_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_70.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller\ant_request_controller.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\ant_sdm.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_common_data.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_1.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_16.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_2.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_22.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_3.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/iar/ant_sdm_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/iar/ant_sdm_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/iar/ant_sdm_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/ses/ant_sdm_rx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/ses/ant_sdm_rx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..4c5e80a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/ses/ant_sdm_rx_d52_starterkit_s212.emProject
@@ -0,0 +1,120 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_sdm_rx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_sdm_rx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_key_manager;../../../../../../../../components/ant/ant_key_manager/config;../../../../../../../../components/ant/ant_profiles/ant_common/ant_request_controller;../../../../../../../../components/ant/ant_profiles/ant_common/pages;../../../../../../../../components/ant/ant_profiles/ant_sdm;../../../../../../../../components/ant/ant_profiles/ant_sdm/pages;../../../../../../../../components/ant/ant_profiles/ant_sdm/utils;../../../../../../../../components/ant/ant_state_indicator;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/mutex;../../../../../../../../components/libraries/pwr_mgmt;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_70.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_80.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_81.c" />
+      <file file_name="../../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/ant_request_controller/ant_request_controller.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/ant_sdm.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_common_data.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_1.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_16.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_2.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_22.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_3.c" />
+      <file file_name="../../../../../../../../components/ant/ant_state_indicator/ant_state_indicator.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp_btn_ant.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/ses/ant_sdm_rx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/ses/ant_sdm_rx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..a66a7af
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/ses/ant_sdm_rx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_sdm_rx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..93f065c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/main.c
new file mode 100644
index 0000000..c1abc64
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/main.c
@@ -0,0 +1,287 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2012
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @defgroup ant_sdm_rx_example ANT SDM RX example
+ * @{
+ * @ingroup nrf_ant_sdm
+ *
+ * @brief Example of ANT SDM RX Profile.
+ *
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdio.h>
+#include "nrf.h"
+#include "bsp.h"
+#include "hardfault.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "nrf_pwr_mgmt.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "ant_key_manager.h"
+#include "ant_sdm.h"
+#include "bsp_btn_ant.h"
+#include "ant_state_indicator.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+/** @snippet [ANT SDM RX Instance] */
+void ant_sdm_evt_handler(ant_sdm_profile_t * p_profile, ant_sdm_evt_t event);
+
+SDM_DISP_CHANNEL_CONFIG_DEF(m_ant_sdm,
+                            SDM_CHANNEL_NUM,
+                            CHAN_ID_TRANS_TYPE,
+                            CHAN_ID_DEV_NUM,
+                            ANTPLUS_NETWORK_NUM,
+                            SDM_MSG_PERIOD_4Hz);
+SDM_DISP_PROFILE_CONFIG_DEF(m_ant_sdm,
+                            ant_sdm_evt_handler);
+
+static ant_sdm_profile_t m_ant_sdm;
+/** @snippet [ANT SDM RX Instance] */
+
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, ANT_SDM_ANT_OBSERVER_PRIO, ant_sdm_disp_evt_handler, &m_ant_sdm);
+
+
+/**@brief Function for handling ANT SDM events.
+ */
+void ant_sdm_evt_handler(ant_sdm_profile_t * p_profile, ant_sdm_evt_t event)
+{
+    nrf_pwr_mgmt_feed();
+
+    switch (event)
+    {
+        case ANT_SDM_PAGE_1_UPDATED:
+            /* fall through */
+        case ANT_SDM_PAGE_2_UPDATED:
+            /* fall through */
+        case ANT_SDM_PAGE_3_UPDATED:
+            /* fall through */
+        case ANT_SDM_PAGE_16_UPDATED:
+            /* fall through */
+        case ANT_SDM_PAGE_22_UPDATED:
+            /* fall through */
+        case ANT_SDM_PAGE_80_UPDATED:
+            /* fall through */
+        case ANT_SDM_PAGE_81_UPDATED:
+            NRF_LOG_INFO("Page was updated");
+            break;
+
+        case ANT_SDM_PAGE_REQUEST_SUCCESS:
+            NRF_LOG_INFO("ANT_SDM_PAGE_REQUEST_SUCCESS");
+            break;
+
+        case ANT_SDM_PAGE_REQUEST_FAILED:
+            NRF_LOG_INFO("ANT_SDM_PAGE_REQUEST_FAILED");
+            break;
+
+        default:
+            break;
+    }
+}
+
+/**@brief Function for handling bsp events.
+ */
+void bsp_evt_handler(bsp_event_t evt)
+{
+    ret_code_t               err_code;
+    ant_common_page70_data_t page70;
+
+    switch (evt)
+    {
+        case BSP_EVENT_KEY_0:
+            page70   = ANT_COMMON_PAGE_DATA_REQUEST(ANT_SDM_PAGE_16);
+            err_code = ant_sdm_page_request(&m_ant_sdm, &page70);
+            APP_ERROR_CHECK(err_code);
+            break;
+
+        case BSP_EVENT_KEY_1:
+            page70   = ANT_COMMON_PAGE_DATA_REQUEST(ANT_SDM_PAGE_22);
+            err_code = ant_sdm_page_request(&m_ant_sdm, &page70);
+            APP_ERROR_CHECK(err_code);
+            break;
+
+        case BSP_EVENT_SLEEP:
+            nrf_pwr_mgmt_shutdown(NRF_PWR_MGMT_SHUTDOWN_GOTO_SYSOFF);
+            break;
+
+        default:
+            return; // no implementation needed
+    }
+}
+
+/**
+ * @brief Function for shutdown events.
+ *
+ * @param[in]   event       Shutdown type.
+ */
+static bool shutdown_handler(nrf_pwr_mgmt_evt_t event)
+{
+    ret_code_t err_code;
+
+    switch (event)
+    {
+        case NRF_PWR_MGMT_EVT_PREPARE_WAKEUP:
+            err_code = bsp_btn_ant_sleep_mode_prepare();
+            APP_ERROR_CHECK(err_code);
+            break;
+
+        default:
+            break;
+    }
+
+    return true;
+}
+
+NRF_PWR_MGMT_HANDLER_REGISTER(shutdown_handler,  APP_SHUTDOWN_HANDLER_PRIORITY);
+
+/**@brief Function for the timer and BSP initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                        bsp_evt_handler);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_btn_ant_init(m_ant_sdm.channel_number, SDM_DISP_CHANNEL_TYPE);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_state_indicator_init(m_ant_sdm.channel_number, SDM_DISP_CHANNEL_TYPE);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for ANT stack initialization.
+ *
+ * @details Initializes the SoftDevice and the ANT event interrupt.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_plus_key_set(ANTPLUS_NETWORK_NUM);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for SDM Profile initialization.
+ *
+ * @details Initializes the SDM Profile and opens the ANT channel.
+ */
+static void profile_setup(void)
+{
+/** @snippet [ANT SDM RX Profile Setup] */
+    uint32_t err_code;
+
+    err_code = ant_sdm_disp_init(&m_ant_sdm,
+                                 SDM_DISP_CHANNEL_CONFIG(m_ant_sdm),
+                                 SDM_DISP_PROFILE_CONFIG(m_ant_sdm));
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_sdm_disp_open(&m_ant_sdm);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_state_indicator_channel_opened();
+    APP_ERROR_CHECK(err_code);
+/** @snippet [ANT SDM RX Profile Setup] */
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for application main entry, does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    profile_setup();
+
+    NRF_LOG_INFO("ANT+ Stride Based Speed and Distance RX example started.");
+
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
+
+
+/**
+ *@}
+ **/
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/arm4/ant_sdm_rx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/arm4/ant_sdm_rx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/arm4/ant_sdm_rx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/arm4/ant_sdm_rx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/arm4/ant_sdm_rx_pca10040_s212.uvproj
new file mode 100644
index 0000000..a2e8d3c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/arm4/ant_sdm_rx_pca10040_s212.uvproj
@@ -0,0 +1,590 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>            <File>
+              <FileName>bsp_btn_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_70.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_70.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_80.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_81.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_request_controller.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller\ant_request_controller.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\ant_sdm.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_common_data.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_common_data.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_16.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_16.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_22.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_22.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/arm5_no_packs/ant_sdm_rx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/arm5_no_packs/ant_sdm_rx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/arm5_no_packs/ant_sdm_rx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/arm5_no_packs/ant_sdm_rx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/arm5_no_packs/ant_sdm_rx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..9e324c0
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/arm5_no_packs/ant_sdm_rx_pca10040_s212.uvprojx
@@ -0,0 +1,614 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>            <File>
+              <FileName>bsp_btn_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_70.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_70.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_80.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_81.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_request_controller.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller\ant_request_controller.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\ant_sdm.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_common_data.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_common_data.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_16.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_16.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_22.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_22.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..c86ce9d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,212 @@
+PROJECT_NAME     := ant_sdm_rx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_sdm_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_70.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_80.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_81.c \
+  $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/ant_request_controller/ant_request_controller.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/ant_sdm.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_common_data.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_1.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_16.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_2.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_22.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_3.c \
+  $(SDK_ROOT)/components/ant/ant_state_indicator/ant_state_indicator.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp_btn_ant.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/ant/ant_key_manager \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/utils \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/ant_request_controller \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/components/ant/ant_state_indicator \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/ant/ant_key_manager/config \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  ../config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages \
+  $(SDK_ROOT)/components/libraries/timer \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/armgcc/ant_sdm_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/armgcc/ant_sdm_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..840d4d1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/armgcc/ant_sdm_rx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..74ec1c1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,4078 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANTPLUS_NETWORK_NUM - ANT PLUS network number. 
+#ifndef ANTPLUS_NETWORK_NUM
+#define ANTPLUS_NETWORK_NUM 0
+#endif
+
+// <o> APP_SHUTDOWN_HANDLER_PRIORITY - Application shutdown observer priority. 
+#ifndef APP_SHUTDOWN_HANDLER_PRIORITY
+#define APP_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 0
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 0
+#endif
+
+// <o> SDM_CHANNEL_NUM - Channel number assigned to SDM profile. 
+#ifndef SDM_CHANNEL_NUM
+#define SDM_CHANNEL_NUM 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Board Support 
+
+//==========================================================
+// <e> BSP_BTN_ANT_ENABLED - bsp_btn_ant - Button Control for ANT
+//==========================================================
+#ifndef BSP_BTN_ANT_ENABLED
+#define BSP_BTN_ANT_ENABLED 1
+#endif
+// <o> BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID - Wakeup button ID. 
+#ifndef BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID
+#define BSP_BTN_ANT_CONFIG_WAKEUP_BTN_ID 3
+#endif
+
+// <o> BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID - Sleep button ID. 
+#ifndef BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID
+#define BSP_BTN_ANT_CONFIG_SLEEP_BTN_ID 3
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_COMMON_PAGE_70_ENABLED - ant_common_page_70 - ANT+ common page 70
+//==========================================================
+#ifndef ANT_COMMON_PAGE_70_ENABLED
+#define ANT_COMMON_PAGE_70_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_70_LOG_ENABLED - Enables logging of common page 70 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_70_LOG_ENABLED
+#define ANT_COMMON_PAGE_70_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_70_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_70_LOG_LEVEL
+#define ANT_COMMON_PAGE_70_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_70_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_70_INFO_COLOR
+#define ANT_COMMON_PAGE_70_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> ANT_COMMON_PAGE_80_ENABLED - ant_common_page_80 - ANT+ common page 80
+//==========================================================
+#ifndef ANT_COMMON_PAGE_80_ENABLED
+#define ANT_COMMON_PAGE_80_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_80_LOG_ENABLED - Enables logging of common page 80 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_80_LOG_ENABLED
+#define ANT_COMMON_PAGE_80_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_80_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_80_LOG_LEVEL
+#define ANT_COMMON_PAGE_80_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_80_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_80_INFO_COLOR
+#define ANT_COMMON_PAGE_80_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> ANT_COMMON_PAGE_81_ENABLED - ant_common_page_81 - ANT+ common page 81
+//==========================================================
+#ifndef ANT_COMMON_PAGE_81_ENABLED
+#define ANT_COMMON_PAGE_81_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_81_LOG_ENABLED - Enables logging of common page 81 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_81_LOG_ENABLED
+#define ANT_COMMON_PAGE_81_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_81_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_81_LOG_LEVEL
+#define ANT_COMMON_PAGE_81_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_81_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_81_INFO_COLOR
+#define ANT_COMMON_PAGE_81_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_KEY_MANAGER_ENABLED  - ant_key_manager - Software Component
+ 
+
+#ifndef ANT_KEY_MANAGER_ENABLED
+#define ANT_KEY_MANAGER_ENABLED 1
+#endif
+
+// <q> ANT_REQUEST_CONTROLLER_ENABLED  - ant_request_controller - ANT+ request controller
+ 
+
+#ifndef ANT_REQUEST_CONTROLLER_ENABLED
+#define ANT_REQUEST_CONTROLLER_ENABLED 1
+#endif
+
+// <e> ANT_SDM_ENABLED - ant_sdm - Stride Based Speed and Distance Monitor Profile
+//==========================================================
+#ifndef ANT_SDM_ENABLED
+#define ANT_SDM_ENABLED 1
+#endif
+// <e> ANT_SDM_LOG_ENABLED - Enables general logging in the module.
+//==========================================================
+#ifndef ANT_SDM_LOG_ENABLED
+#define ANT_SDM_LOG_ENABLED 1
+#endif
+// <o> ANT_SDM_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_SDM_LOG_LEVEL
+#define ANT_SDM_LOG_LEVEL 3
+#endif
+
+// <o> ANT_SDM_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_SDM_INFO_COLOR
+#define ANT_SDM_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP
+//==========================================================
+#ifndef ANT_STATE_INDICATOR_ENABLED
+#define ANT_STATE_INDICATOR_ENABLED 1
+#endif
+// <o> ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY - Shutdown observer priority. 
+#ifndef ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY
+#define ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/iar/ant_sdm_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/iar/ant_sdm_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/iar/ant_sdm_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/iar/ant_sdm_rx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/iar/ant_sdm_rx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/iar/ant_sdm_rx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/iar/ant_sdm_rx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/iar/ant_sdm_rx_pca10040_s212.ewp
new file mode 100644
index 0000000..2834ad4
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/iar/ant_sdm_rx_pca10040_s212.ewp
@@ -0,0 +1,1112 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_sdm_rx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_sdm_rx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_sdm_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_70.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller\ant_request_controller.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\ant_sdm.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_common_data.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_1.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_16.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_2.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_22.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_3.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp_btn_ant.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/ses/ant_sdm_rx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/ses/ant_sdm_rx_pca10040_s212.emProject
new file mode 100644
index 0000000..3b9b426
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/ses/ant_sdm_rx_pca10040_s212.emProject
@@ -0,0 +1,119 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_sdm_rx_pca10040_s212" target="8" version="2">
+  <project Name="ant_sdm_rx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_key_manager;../../../../../../../../components/ant/ant_key_manager/config;../../../../../../../../components/ant/ant_profiles/ant_common/ant_request_controller;../../../../../../../../components/ant/ant_profiles/ant_common/pages;../../../../../../../../components/ant/ant_profiles/ant_sdm;../../../../../../../../components/ant/ant_profiles/ant_sdm/pages;../../../../../../../../components/ant/ant_profiles/ant_sdm/utils;../../../../../../../../components/ant/ant_state_indicator;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/mutex;../../../../../../../../components/libraries/pwr_mgmt;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_70.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_80.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_81.c" />
+      <file file_name="../../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/ant_request_controller/ant_request_controller.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/ant_sdm.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_common_data.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_1.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_16.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_2.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_22.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_3.c" />
+      <file file_name="../../../../../../../../components/ant/ant_state_indicator/ant_state_indicator.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp_btn_ant.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/ses/ant_sdm_rx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/ses/ant_sdm_rx_pca10040_s212.emSession
new file mode 100644
index 0000000..0f7924f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/ses/ant_sdm_rx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_sdm_rx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..d32ea27
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_rx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/ant_sdm_tx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/ant_sdm_tx.eww
new file mode 100644
index 0000000..170c5a4
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/ant_sdm_tx.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_sdm_tx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_sdm_tx_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/arm4/ant_sdm_tx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/arm4/ant_sdm_tx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/arm4/ant_sdm_tx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/arm4/ant_sdm_tx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/arm4/ant_sdm_tx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..2b36249
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/arm4/ant_sdm_tx_d52_starterkit_s212.uvproj
@@ -0,0 +1,596 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_70.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_70.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_80.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_81.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_request_controller.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller\ant_request_controller.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\ant_sdm.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_common_data.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_common_data.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_16.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_16.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_22.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_22.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\simulator\ant_sdm_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/arm5_no_packs/ant_sdm_tx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/arm5_no_packs/ant_sdm_tx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/arm5_no_packs/ant_sdm_tx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/arm5_no_packs/ant_sdm_tx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/arm5_no_packs/ant_sdm_tx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..a125d71
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/arm5_no_packs/ant_sdm_tx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,620 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_70.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_70.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_80.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_81.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_request_controller.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller\ant_request_controller.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\ant_sdm.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_common_data.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_common_data.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_16.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_16.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_22.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_22.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\simulator\ant_sdm_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..423249d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,212 @@
+PROJECT_NAME     := ant_sdm_tx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_sdm_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/components/libraries/sensorsim/sensorsim.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_70.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_80.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_81.c \
+  $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/ant_request_controller/ant_request_controller.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/ant_sdm.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_common_data.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_1.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_16.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_2.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_22.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_3.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/simulator/ant_sdm_simulator.c \
+  $(SDK_ROOT)/components/ant/ant_state_indicator/ant_state_indicator.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components/libraries/sensorsim \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/ant/ant_key_manager \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/utils \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/ant_request_controller \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/components/ant/ant_state_indicator \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/ant/ant_key_manager/config \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  ../config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/simulator \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/armgcc/ant_sdm_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/armgcc/ant_sdm_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..1b5cea2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/armgcc/ant_sdm_tx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..e2a0259
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,4190 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANTPLUS_NETWORK_NUM - ANT PLUS network number. 
+#ifndef ANTPLUS_NETWORK_NUM
+#define ANTPLUS_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 1
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 5
+#endif
+
+// <h> MANUFACTURER_IDENTIFICATION_COMMON_PAGE 
+
+//==========================================================
+// <o> SDM_HW_REVISION - Hardware revision for manufacturer's identification common page 
+#ifndef SDM_HW_REVISION
+#define SDM_HW_REVISION 127
+#endif
+
+// <o> SDM_MANUFACTURER_ID - Manufacturer ID for manufacturer's identification common page 
+#ifndef SDM_MANUFACTURER_ID
+#define SDM_MANUFACTURER_ID 43690
+#endif
+
+// <o> SDM_MODEL_NUMBER - Model number for manufacturer's identification common page 
+#ifndef SDM_MODEL_NUMBER
+#define SDM_MODEL_NUMBER 21845
+#endif
+
+// </h> 
+//==========================================================
+
+// <o> MODIFICATION_TYPE  - Type of cadence values update
+ 
+
+// <i> It can be updated by buttons or periodically rise and fall in auto mode
+// <0=> MODIFICATION_TYPE_BUTTON 
+// <1=> MODIFICATION_TYPE_AUTO 
+
+#ifndef MODIFICATION_TYPE
+#define MODIFICATION_TYPE 0
+#endif
+
+// <h> PRODUCT_INFORMATION_COMMON_PAGE 
+
+//==========================================================
+// <o> SDM_SW_REVISION_MAJOR - Software revision major number for product information common page 
+#ifndef SDM_SW_REVISION_MAJOR
+#define SDM_SW_REVISION_MAJOR 170
+#endif
+
+// <o> SDM_SW_REVISION_MINOR - Software revision minor number for product information common page, unused value 
+#ifndef SDM_SW_REVISION_MINOR
+#define SDM_SW_REVISION_MINOR 255
+#endif
+
+// <o> SDM_SERIAL_NUMBER - Serial number for product information common page 
+#ifndef SDM_SERIAL_NUMBER
+#define SDM_SERIAL_NUMBER 1234567
+#endif
+
+// </h> 
+//==========================================================
+
+// <o> SDM_CHANNEL_NUM - Channel number assigned to SDM profile. 
+#ifndef SDM_CHANNEL_NUM
+#define SDM_CHANNEL_NUM 0
+#endif
+
+// <h> SIMULATOR 
+
+//==========================================================
+// <o> SIMULATOR_STRIDE_LEN - Length of one stride 
+#ifndef SIMULATOR_STRIDE_LEN
+#define SIMULATOR_STRIDE_LEN 75
+#endif
+
+// <o> SIMULATOR_BURN_RATE - Calories burn rate 
+#ifndef SIMULATOR_BURN_RATE
+#define SIMULATOR_BURN_RATE 62
+#endif
+
+// <o> SIMULATOR_MIN - Minimal cadence 
+#ifndef SIMULATOR_MIN
+#define SIMULATOR_MIN 60
+#endif
+
+// <o> SIMULATOR_MAX - Maximal cadence 
+#ifndef SIMULATOR_MAX
+#define SIMULATOR_MAX 120
+#endif
+
+// <o> SIMULATOR_INCR - Cadence increment 
+#ifndef SIMULATOR_INCR
+#define SIMULATOR_INCR 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_COMMON_PAGE_70_ENABLED - ant_common_page_70 - ANT+ common page 70
+//==========================================================
+#ifndef ANT_COMMON_PAGE_70_ENABLED
+#define ANT_COMMON_PAGE_70_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_70_LOG_ENABLED - Enables logging of common page 70 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_70_LOG_ENABLED
+#define ANT_COMMON_PAGE_70_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_70_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_70_LOG_LEVEL
+#define ANT_COMMON_PAGE_70_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_70_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_70_INFO_COLOR
+#define ANT_COMMON_PAGE_70_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> ANT_COMMON_PAGE_80_ENABLED - ant_common_page_80 - ANT+ common page 80
+//==========================================================
+#ifndef ANT_COMMON_PAGE_80_ENABLED
+#define ANT_COMMON_PAGE_80_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_80_LOG_ENABLED - Enables logging of common page 80 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_80_LOG_ENABLED
+#define ANT_COMMON_PAGE_80_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_80_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_80_LOG_LEVEL
+#define ANT_COMMON_PAGE_80_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_80_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_80_INFO_COLOR
+#define ANT_COMMON_PAGE_80_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> ANT_COMMON_PAGE_81_ENABLED - ant_common_page_81 - ANT+ common page 81
+//==========================================================
+#ifndef ANT_COMMON_PAGE_81_ENABLED
+#define ANT_COMMON_PAGE_81_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_81_LOG_ENABLED - Enables logging of common page 81 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_81_LOG_ENABLED
+#define ANT_COMMON_PAGE_81_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_81_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_81_LOG_LEVEL
+#define ANT_COMMON_PAGE_81_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_81_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_81_INFO_COLOR
+#define ANT_COMMON_PAGE_81_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_KEY_MANAGER_ENABLED  - ant_key_manager - Software Component
+ 
+
+#ifndef ANT_KEY_MANAGER_ENABLED
+#define ANT_KEY_MANAGER_ENABLED 1
+#endif
+
+// <q> ANT_REQUEST_CONTROLLER_ENABLED  - ant_request_controller - ANT+ request controller
+ 
+
+#ifndef ANT_REQUEST_CONTROLLER_ENABLED
+#define ANT_REQUEST_CONTROLLER_ENABLED 1
+#endif
+
+// <e> ANT_SDM_ENABLED - ant_sdm - Stride Based Speed and Distance Monitor Profile
+//==========================================================
+#ifndef ANT_SDM_ENABLED
+#define ANT_SDM_ENABLED 1
+#endif
+// <e> ANT_SDM_LOG_ENABLED - Enables general logging in the module.
+//==========================================================
+#ifndef ANT_SDM_LOG_ENABLED
+#define ANT_SDM_LOG_ENABLED 1
+#endif
+// <o> ANT_SDM_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_SDM_LOG_LEVEL
+#define ANT_SDM_LOG_LEVEL 3
+#endif
+
+// <o> ANT_SDM_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_SDM_INFO_COLOR
+#define ANT_SDM_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP
+//==========================================================
+#ifndef ANT_STATE_INDICATOR_ENABLED
+#define ANT_STATE_INDICATOR_ENABLED 1
+#endif
+// <o> ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY - Shutdown observer priority. 
+#ifndef ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY
+#define ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/iar/ant_sdm_tx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/iar/ant_sdm_tx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/iar/ant_sdm_tx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/iar/ant_sdm_tx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/iar/ant_sdm_tx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..1855b33
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/iar/ant_sdm_tx_d52_starterkit_s212.ewp
@@ -0,0 +1,1114 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_sdm_tx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_sdm_tx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_sdm_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_70.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller\ant_request_controller.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\ant_sdm.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_common_data.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_1.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_16.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_2.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_22.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_3.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\simulator\ant_sdm_simulator.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/iar/ant_sdm_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/iar/ant_sdm_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/iar/ant_sdm_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/ses/ant_sdm_tx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/ses/ant_sdm_tx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..e50f27e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/ses/ant_sdm_tx_d52_starterkit_s212.emProject
@@ -0,0 +1,121 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_sdm_tx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_sdm_tx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_key_manager;../../../../../../../../components/ant/ant_key_manager/config;../../../../../../../../components/ant/ant_profiles/ant_common/ant_request_controller;../../../../../../../../components/ant/ant_profiles/ant_common/pages;../../../../../../../../components/ant/ant_profiles/ant_sdm;../../../../../../../../components/ant/ant_profiles/ant_sdm/pages;../../../../../../../../components/ant/ant_profiles/ant_sdm/simulator;../../../../../../../../components/ant/ant_profiles/ant_sdm/utils;../../../../../../../../components/ant/ant_state_indicator;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/mutex;../../../../../../../../components/libraries/pwr_mgmt;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/sensorsim;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+      <file file_name="../../../../../../../../components/libraries/sensorsim/sensorsim.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_70.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_80.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_81.c" />
+      <file file_name="../../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/ant_request_controller/ant_request_controller.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/ant_sdm.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_common_data.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_1.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_16.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_2.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_22.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_3.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/simulator/ant_sdm_simulator.c" />
+      <file file_name="../../../../../../../../components/ant/ant_state_indicator/ant_state_indicator.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/ses/ant_sdm_tx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/ses/ant_sdm_tx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..fa7542b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/ses/ant_sdm_tx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_sdm_tx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..93f065c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/main.c
new file mode 100644
index 0000000..2537c12
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/main.c
@@ -0,0 +1,305 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2012
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @defgroup ant_sdm_tx_example ANT SDM TX example
+ * @{
+ * @ingroup nrf_ant_sdm
+ *
+ * @brief Example of ANT SDM TX Profile.
+ *
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdio.h>
+#include "nrf.h"
+#include "bsp.h"
+#include "hardfault.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "nrf_pwr_mgmt.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "ant_key_manager.h"
+#include "ant_sdm.h"
+#include "ant_sdm_simulator.h"
+#include "ant_state_indicator.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+#define MODIFICATION_TYPE_BUTTON 0 /* predefined value, MUST REMAIN UNCHANGED */
+#define MODIFICATION_TYPE_AUTO   1 /* predefined value, MUST REMAIN UNCHANGED */
+
+#if (MODIFICATION_TYPE != MODIFICATION_TYPE_BUTTON) \
+    && (MODIFICATION_TYPE != MODIFICATION_TYPE_AUTO)
+    #error Unsupported value of MODIFICATION_TYPE.
+#endif
+
+/** @snippet [ANT SDM TX Instance] */
+void ant_sdm_evt_handler(ant_sdm_profile_t * p_profile, ant_sdm_evt_t event);
+
+SDM_SENS_CHANNEL_CONFIG_DEF(m_ant_sdm,
+                            SDM_CHANNEL_NUM,
+                            CHAN_ID_TRANS_TYPE,
+                            CHAN_ID_DEV_NUM,
+                            ANTPLUS_NETWORK_NUM);
+SDM_SENS_PROFILE_CONFIG_DEF(m_ant_sdm,
+                            ANT_SDM_PAGE_2,
+                            ant_sdm_evt_handler);
+
+static ant_sdm_profile_t m_ant_sdm;
+/** @snippet [ANT SDM TX Instance] */
+
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, ANT_SDM_ANT_OBSERVER_PRIO, ant_sdm_sens_evt_handler, &m_ant_sdm);
+
+
+static ant_sdm_simulator_t m_ant_sdm_simulator;    /**< Simulator used to simulate cadence. */
+
+#if MODIFICATION_TYPE == MODIFICATION_TYPE_BUTTON
+/**@brief Function for handling bsp events.
+ */
+/** @snippet [ANT SDM simulator button] */
+void bsp_evt_handler(bsp_event_t evt)
+{
+    switch (evt)
+    {
+        case BSP_EVENT_KEY_0:
+            ant_sdm_simulator_increment(&m_ant_sdm_simulator);
+            break;
+
+        case BSP_EVENT_KEY_1:
+            ant_sdm_simulator_decrement(&m_ant_sdm_simulator);
+            break;
+
+        default:
+            return; // no implementation needed
+    }
+}
+/** @snippet [ANT SDM simulator button] */
+#endif // MODIFICATION_TYPE == MODIFICATION_TYPE_BUTTON
+
+/**@brief Function for the timer and BSP initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+#if MODIFICATION_TYPE == MODIFICATION_TYPE_AUTO
+    err_code = bsp_init(BSP_INIT_LEDS, NULL);
+#else
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                        bsp_evt_handler);
+#endif
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_state_indicator_init(m_ant_sdm.channel_number, SDM_SENS_CHANNEL_TYPE);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for the SDM simulator initialization.
+ */
+static void simulator_setup(void)
+{
+    /** @snippet [ANT SDM simulator init] */
+    const ant_sdm_simulator_cfg_t simulator_cfg = DEFAULT_ANT_SDM_SIMULATOR_CFG(&m_ant_sdm,
+                                                                                SIMULATOR_STRIDE_LEN,
+                                                                                SIMULATOR_BURN_RATE,
+                                                                                SIMULATOR_MIN,
+                                                                                SIMULATOR_MAX,
+                                                                                SIMULATOR_INCR);
+
+    /** @snippet [ANT SDM simulator init] */
+
+#if MODIFICATION_TYPE == MODIFICATION_TYPE_AUTO
+    /** @snippet [ANT SDM simulator auto init] */
+    ant_sdm_simulator_init(&m_ant_sdm_simulator, &simulator_cfg, true);
+    /** @snippet [ANT SDM simulator auto init] */
+#else
+    /** @snippet [ANT SDM simulator button init] */
+    ant_sdm_simulator_init(&m_ant_sdm_simulator, &simulator_cfg, false);
+    /** @snippet [ANT SDM simulator button init] */
+#endif
+}
+
+/**@brief Function for ANT stack initialization.
+ *
+ * @details Initializes the SoftDevice and the ANT event interrupt.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_plus_key_set(ANTPLUS_NETWORK_NUM);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for handling ANT SDM events.
+ */
+/** @snippet [ANT SDM simulator call] */
+void ant_sdm_evt_handler(ant_sdm_profile_t * p_profile, ant_sdm_evt_t event)
+{
+    nrf_pwr_mgmt_feed();
+
+    switch (event)
+    {
+        case ANT_SDM_PAGE_1_UPDATED:
+        /* fall through */
+        case ANT_SDM_PAGE_2_UPDATED:
+        /* fall through */
+        case ANT_SDM_PAGE_3_UPDATED:
+        /* fall through */
+        case ANT_SDM_PAGE_16_UPDATED:
+        /* fall through */
+        case ANT_SDM_PAGE_22_UPDATED:
+        /* fall through */
+        case ANT_SDM_PAGE_80_UPDATED:
+        /* fall through */
+        case ANT_SDM_PAGE_81_UPDATED:
+            ant_sdm_simulator_one_iteration(&m_ant_sdm_simulator);
+            break;
+
+        default:
+            break;
+    }
+}
+/** @snippet [ANT SDM simulator call] */
+
+/**@brief Function for SDM Profile initialization.
+ *
+ * @details Initializes the SDM Profile and opens the ANT channel.
+ */
+static void profile_setup(void)
+{
+/** @snippet [ANT SDM TX Profile Setup] */
+    uint32_t err_code;
+
+    err_code = ant_sdm_sens_init(&m_ant_sdm,
+                                 SDM_SENS_CHANNEL_CONFIG(m_ant_sdm),
+                                 SDM_SENS_PROFILE_CONFIG(m_ant_sdm));
+    APP_ERROR_CHECK(err_code);
+
+    // fill manufacturer's common data page.
+    m_ant_sdm.page_80 = ANT_COMMON_page80(SDM_HW_REVISION,
+                                          SDM_MANUFACTURER_ID,
+                                          SDM_MODEL_NUMBER);
+    // fill product's common data page.
+    m_ant_sdm.page_81 = ANT_COMMON_page81(SDM_SW_REVISION_MAJOR,
+                                          SDM_SW_REVISION_MINOR,
+                                          SDM_SERIAL_NUMBER);
+
+    // fill capabilities.
+    m_ant_sdm.SDM_PROFILE_capabilities.cadency_is_valid  = true;
+    m_ant_sdm.SDM_PROFILE_capabilities.speed_is_valid    = true;
+    m_ant_sdm.SDM_PROFILE_capabilities.calorie_is_valid  = true;
+    m_ant_sdm.SDM_PROFILE_capabilities.time_is_valid     = true;
+    m_ant_sdm.SDM_PROFILE_capabilities.latency_is_valid  = true;
+    m_ant_sdm.SDM_PROFILE_capabilities.distance_is_valid = true;
+
+    // fill status.
+    m_ant_sdm.SDM_PROFILE_status.state    = ANT_SDM_USE_STATE_ACTIVE;
+    m_ant_sdm.SDM_PROFILE_status.health   = ANT_SDM_HEALTH_OK;
+    m_ant_sdm.SDM_PROFILE_status.battery  = ANT_SDM_BATTERY_STATUS_GOOD;
+    m_ant_sdm.SDM_PROFILE_status.location = ANT_SDM_LOCATION_ANKLE;
+
+    err_code = ant_sdm_sens_open(&m_ant_sdm);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_state_indicator_channel_opened();
+    APP_ERROR_CHECK(err_code);
+/** @snippet [ANT SDM TX Profile Setup] */
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for application main entry, does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    simulator_setup();
+    profile_setup();
+
+    NRF_LOG_INFO("ANT+ Stride Based Speed and Distance TX example started.");
+
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/arm4/ant_sdm_tx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/arm4/ant_sdm_tx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/arm4/ant_sdm_tx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/arm4/ant_sdm_tx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/arm4/ant_sdm_tx_pca10040_s212.uvproj
new file mode 100644
index 0000000..a704097
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/arm4/ant_sdm_tx_pca10040_s212.uvproj
@@ -0,0 +1,593 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_70.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_70.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_80.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_81.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_request_controller.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller\ant_request_controller.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\ant_sdm.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_common_data.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_common_data.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_16.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_16.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_22.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_22.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\simulator\ant_sdm_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/arm5_no_packs/ant_sdm_tx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/arm5_no_packs/ant_sdm_tx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/arm5_no_packs/ant_sdm_tx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/arm5_no_packs/ant_sdm_tx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/arm5_no_packs/ant_sdm_tx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..ba2712a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/arm5_no_packs/ant_sdm_tx_pca10040_s212.uvprojx
@@ -0,0 +1,617 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\simulator;..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils;..\..\..\..\..\..\..\..\components\ant\ant_state_indicator;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\sensorsim;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_70.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_70.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_80.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</FilePath>            </File>            <File>
+              <FileName>ant_common_page_81.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</FilePath>            </File>            <File>
+              <FileName>ant_key_manager.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath>            </File>            <File>
+              <FileName>ant_request_controller.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller\ant_request_controller.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\ant_sdm.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_common_data.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_common_data.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_1.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_1.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_16.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_16.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_2.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_22.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_22.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_page_3.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_3.c</FilePath>            </File>            <File>
+              <FileName>ant_sdm_simulator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\simulator\ant_sdm_simulator.c</FilePath>            </File>            <File>
+              <FileName>ant_state_indicator.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>            <File>
+              <FileName>sensorsim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..d6c7202
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,215 @@
+PROJECT_NAME     := ant_sdm_tx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_sdm_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/components/libraries/sensorsim/sensorsim.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_70.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_80.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages/ant_common_page_81.c \
+  $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/ant_request_controller/ant_request_controller.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/ant_sdm.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_common_data.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_1.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_16.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_2.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_22.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_3.c \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/simulator/ant_sdm_simulator.c \
+  $(SDK_ROOT)/components/ant/ant_state_indicator/ant_state_indicator.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components/libraries/sensorsim \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/ant/ant_key_manager \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/pages \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/utils \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_common/ant_request_controller \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/components/ant/ant_state_indicator \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/components/ant/ant_key_manager/config \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  ../config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/pages \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/ant/ant_profiles/ant_sdm/simulator \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DANT_STACK_SUPPORT_REQD
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DANT_STACK_SUPPORT_REQD
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/armgcc/ant_sdm_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/armgcc/ant_sdm_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..840d4d1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/armgcc/ant_sdm_tx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..f715940
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,4134 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANTPLUS_NETWORK_NUM - ANT PLUS network number. 
+#ifndef ANTPLUS_NETWORK_NUM
+#define ANTPLUS_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 1
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 5
+#endif
+
+// <h> MANUFACTURER_IDENTIFICATION_COMMON_PAGE 
+
+//==========================================================
+// <o> SDM_HW_REVISION - Hardware revision for manufacturer's identification common page 
+#ifndef SDM_HW_REVISION
+#define SDM_HW_REVISION 127
+#endif
+
+// <o> SDM_MANUFACTURER_ID - Manufacturer ID for manufacturer's identification common page 
+#ifndef SDM_MANUFACTURER_ID
+#define SDM_MANUFACTURER_ID 43690
+#endif
+
+// <o> SDM_MODEL_NUMBER - Model number for manufacturer's identification common page 
+#ifndef SDM_MODEL_NUMBER
+#define SDM_MODEL_NUMBER 21845
+#endif
+
+// </h> 
+//==========================================================
+
+// <o> MODIFICATION_TYPE  - Type of cadence values update
+ 
+
+// <i> It can be updated by buttons or periodically rise and fall in auto mode
+// <0=> MODIFICATION_TYPE_BUTTON 
+// <1=> MODIFICATION_TYPE_AUTO 
+
+#ifndef MODIFICATION_TYPE
+#define MODIFICATION_TYPE 0
+#endif
+
+// <h> PRODUCT_INFORMATION_COMMON_PAGE 
+
+//==========================================================
+// <o> SDM_SW_REVISION_MAJOR - Software revision major number for product information common page 
+#ifndef SDM_SW_REVISION_MAJOR
+#define SDM_SW_REVISION_MAJOR 170
+#endif
+
+// <o> SDM_SW_REVISION_MINOR - Software revision minor number for product information common page, unused value 
+#ifndef SDM_SW_REVISION_MINOR
+#define SDM_SW_REVISION_MINOR 255
+#endif
+
+// <o> SDM_SERIAL_NUMBER - Serial number for product information common page 
+#ifndef SDM_SERIAL_NUMBER
+#define SDM_SERIAL_NUMBER 1234567
+#endif
+
+// </h> 
+//==========================================================
+
+// <o> SDM_CHANNEL_NUM - Channel number assigned to SDM profile. 
+#ifndef SDM_CHANNEL_NUM
+#define SDM_CHANNEL_NUM 0
+#endif
+
+// <h> SIMULATOR 
+
+//==========================================================
+// <o> SIMULATOR_STRIDE_LEN - Length of one stride 
+#ifndef SIMULATOR_STRIDE_LEN
+#define SIMULATOR_STRIDE_LEN 75
+#endif
+
+// <o> SIMULATOR_BURN_RATE - Calories burn rate 
+#ifndef SIMULATOR_BURN_RATE
+#define SIMULATOR_BURN_RATE 62
+#endif
+
+// <o> SIMULATOR_MIN - Minimal cadence 
+#ifndef SIMULATOR_MIN
+#define SIMULATOR_MIN 60
+#endif
+
+// <o> SIMULATOR_MAX - Maximal cadence 
+#ifndef SIMULATOR_MAX
+#define SIMULATOR_MAX 120
+#endif
+
+// <o> SIMULATOR_INCR - Cadence increment 
+#ifndef SIMULATOR_INCR
+#define SIMULATOR_INCR 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_COMMON_PAGE_70_ENABLED - ant_common_page_70 - ANT+ common page 70
+//==========================================================
+#ifndef ANT_COMMON_PAGE_70_ENABLED
+#define ANT_COMMON_PAGE_70_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_70_LOG_ENABLED - Enables logging of common page 70 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_70_LOG_ENABLED
+#define ANT_COMMON_PAGE_70_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_70_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_70_LOG_LEVEL
+#define ANT_COMMON_PAGE_70_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_70_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_70_INFO_COLOR
+#define ANT_COMMON_PAGE_70_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> ANT_COMMON_PAGE_80_ENABLED - ant_common_page_80 - ANT+ common page 80
+//==========================================================
+#ifndef ANT_COMMON_PAGE_80_ENABLED
+#define ANT_COMMON_PAGE_80_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_80_LOG_ENABLED - Enables logging of common page 80 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_80_LOG_ENABLED
+#define ANT_COMMON_PAGE_80_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_80_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_80_LOG_LEVEL
+#define ANT_COMMON_PAGE_80_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_80_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_80_INFO_COLOR
+#define ANT_COMMON_PAGE_80_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> ANT_COMMON_PAGE_81_ENABLED - ant_common_page_81 - ANT+ common page 81
+//==========================================================
+#ifndef ANT_COMMON_PAGE_81_ENABLED
+#define ANT_COMMON_PAGE_81_ENABLED 1
+#endif
+// <e> ANT_COMMON_PAGE_81_LOG_ENABLED - Enables logging of common page 81 in the module.
+//==========================================================
+#ifndef ANT_COMMON_PAGE_81_LOG_ENABLED
+#define ANT_COMMON_PAGE_81_LOG_ENABLED 1
+#endif
+// <o> ANT_COMMON_PAGE_81_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_COMMON_PAGE_81_LOG_LEVEL
+#define ANT_COMMON_PAGE_81_LOG_LEVEL 3
+#endif
+
+// <o> ANT_COMMON_PAGE_81_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_COMMON_PAGE_81_INFO_COLOR
+#define ANT_COMMON_PAGE_81_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> ANT_KEY_MANAGER_ENABLED  - ant_key_manager - Software Component
+ 
+
+#ifndef ANT_KEY_MANAGER_ENABLED
+#define ANT_KEY_MANAGER_ENABLED 1
+#endif
+
+// <q> ANT_REQUEST_CONTROLLER_ENABLED  - ant_request_controller - ANT+ request controller
+ 
+
+#ifndef ANT_REQUEST_CONTROLLER_ENABLED
+#define ANT_REQUEST_CONTROLLER_ENABLED 1
+#endif
+
+// <e> ANT_SDM_ENABLED - ant_sdm - Stride Based Speed and Distance Monitor Profile
+//==========================================================
+#ifndef ANT_SDM_ENABLED
+#define ANT_SDM_ENABLED 1
+#endif
+// <e> ANT_SDM_LOG_ENABLED - Enables general logging in the module.
+//==========================================================
+#ifndef ANT_SDM_LOG_ENABLED
+#define ANT_SDM_LOG_ENABLED 1
+#endif
+// <o> ANT_SDM_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef ANT_SDM_LOG_LEVEL
+#define ANT_SDM_LOG_LEVEL 3
+#endif
+
+// <o> ANT_SDM_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef ANT_SDM_INFO_COLOR
+#define ANT_SDM_INFO_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP
+//==========================================================
+#ifndef ANT_STATE_INDICATOR_ENABLED
+#define ANT_STATE_INDICATOR_ENABLED 1
+#endif
+// <o> ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY - Shutdown observer priority. 
+#ifndef ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY
+#define ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY 1
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/iar/ant_sdm_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/iar/ant_sdm_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/iar/ant_sdm_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/iar/ant_sdm_tx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/iar/ant_sdm_tx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/iar/ant_sdm_tx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/iar/ant_sdm_tx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/iar/ant_sdm_tx_pca10040_s212.ewp
new file mode 100644
index 0000000..893ed38
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/iar/ant_sdm_tx_pca10040_s212.ewp
@@ -0,0 +1,1117 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>ANT_STACK_SUPPORT_REQD</state>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\simulator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\utils</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_sdm_tx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_sdm_tx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_sdm_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\sensorsim\sensorsim.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_70.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_80.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\pages\ant_common_page_81.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_common\ant_request_controller\ant_request_controller.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\ant_sdm.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_common_data.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_1.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_16.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_2.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_22.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\pages\ant_sdm_page_3.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_profiles\ant_sdm\simulator\ant_sdm_simulator.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_state_indicator\ant_state_indicator.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/ses/ant_sdm_tx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/ses/ant_sdm_tx_pca10040_s212.emProject
new file mode 100644
index 0000000..7ad41db
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/ses/ant_sdm_tx_pca10040_s212.emProject
@@ -0,0 +1,120 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_sdm_tx_pca10040_s212" target="8" version="2">
+  <project Name="ant_sdm_tx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_key_manager;../../../../../../../../components/ant/ant_key_manager/config;../../../../../../../../components/ant/ant_profiles/ant_common/ant_request_controller;../../../../../../../../components/ant/ant_profiles/ant_common/pages;../../../../../../../../components/ant/ant_profiles/ant_sdm;../../../../../../../../components/ant/ant_profiles/ant_sdm/pages;../../../../../../../../components/ant/ant_profiles/ant_sdm/simulator;../../../../../../../../components/ant/ant_profiles/ant_sdm/utils;../../../../../../../../components/ant/ant_state_indicator;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/mutex;../../../../../../../../components/libraries/pwr_mgmt;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/sensorsim;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+      <file file_name="../../../../../../../../components/libraries/sensorsim/sensorsim.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_70.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_80.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/pages/ant_common_page_81.c" />
+      <file file_name="../../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_common/ant_request_controller/ant_request_controller.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/ant_sdm.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_common_data.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_1.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_16.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_2.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_22.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/pages/ant_sdm_page_3.c" />
+      <file file_name="../../../../../../../../components/ant/ant_profiles/ant_sdm/simulator/ant_sdm_simulator.c" />
+      <file file_name="../../../../../../../../components/ant/ant_state_indicator/ant_state_indicator.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/ses/ant_sdm_tx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/ses/ant_sdm_tx_pca10040_s212.emSession
new file mode 100644
index 0000000..7f56a48
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/ses/ant_sdm_tx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_sdm_tx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..d32ea27
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/sdm_rx_device_profile.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/sdm_rx_device_profile.xml
new file mode 100644
index 0000000..11884de
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_plus/ant_sdm/sdm_tx/sdm_rx_device_profile.xml
@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:09-Sep-15 9:26:09 AM-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup />
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">0</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">124</deviceType>
+      <transmissionType type="System.Byte">0</transmissionType>
+      <msgPeriod type="System.UInt16">8134</msgPeriod>
+      <radioFreq type="System.Byte">57</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">34</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">35</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">36</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">37</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">38</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">39</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">40</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/ant_relay_demo.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/ant_relay_demo.eww
new file mode 100644
index 0000000..6e8a94f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/ant_relay_demo.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_relay_demo_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_relay_demo_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/ant_relay_demo_test.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/ant_relay_demo_test.xml
new file mode 100644
index 0000000..b9c3981
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/ant_relay_demo_test.xml
@@ -0,0 +1,124 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:2016-03-17 10:42:45-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup>
+      <NetworkKey Net="0" Key="E8-E4-21-3B-55-7A-67-C1" />
+    </DeviceSetup>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">0</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">5</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">77</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">34</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">35</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">36</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">37</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">38</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">39</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">40</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/arm4/ant_relay_demo_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/arm4/ant_relay_demo_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/arm4/ant_relay_demo_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/arm4/ant_relay_demo_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/arm4/ant_relay_demo_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..0c6cac4
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/arm4/ant_relay_demo_d52_starterkit_s212.uvproj
@@ -0,0 +1,557 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\fifo;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\fifo;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_fifo.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\fifo\app_fifo.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_uart_fifo.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\uart\app_uart_fifo.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/arm5_no_packs/ant_relay_demo_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/arm5_no_packs/ant_relay_demo_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/arm5_no_packs/ant_relay_demo_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/arm5_no_packs/ant_relay_demo_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/arm5_no_packs/ant_relay_demo_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..3675a91
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/arm5_no_packs/ant_relay_demo_d52_starterkit_s212.uvprojx
@@ -0,0 +1,581 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\fifo;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\fifo;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_fifo.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\fifo\app_fifo.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_uart_fifo.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\uart\app_uart_fifo.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..e324e19
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,189 @@
+PROJECT_NAME     := ant_relay_demo_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_relay_demo_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/fifo/app_fifo.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/uart/app_uart_fifo.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/fifo \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/uart \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/armgcc/ant_relay_demo_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/armgcc/ant_relay_demo_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/armgcc/ant_relay_demo_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..fd79d57
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3991 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <h> MOBILE CHANNEL 
+
+//==========================================================
+// <o> MOBILE_CHAN_ID_DEV_TYPE - Mobile Channel ID: Device Type. 
+#ifndef MOBILE_CHAN_ID_DEV_TYPE
+#define MOBILE_CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> MOBILE_CHAN_ID_TRANS_TYPE - Mobile Channel ID: Transmission type. 
+#ifndef MOBILE_CHAN_ID_TRANS_TYPE
+#define MOBILE_CHAN_ID_TRANS_TYPE 5
+#endif
+
+// <o> MOBILE_RF_FREQ - Mobile RF Frequency. 
+#ifndef MOBILE_RF_FREQ
+#define MOBILE_RF_FREQ 77
+#endif
+
+// <o> MOBILE_CHAN_PERIOD - Mobile Channel Period (in 32 kHz counts). 
+#ifndef MOBILE_CHAN_PERIOD
+#define MOBILE_CHAN_PERIOD 8192
+#endif
+
+// <o> ANT_MOBILE_CHANNEL_NUMBER - Mobile ANT channel number. 
+#ifndef ANT_MOBILE_CHANNEL_NUMBER
+#define ANT_MOBILE_CHANNEL_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> RELAY CHANNEL 
+
+//==========================================================
+// <o> RELAY_CHAN_ID_DEV_TYPE - Relay Channel ID: Device Type. 
+#ifndef RELAY_CHAN_ID_DEV_TYPE
+#define RELAY_CHAN_ID_DEV_TYPE 1
+#endif
+
+// <o> RELAY_CHAN_ID_TRANS_TYPE - Relay Channel ID: Transmission type. 
+#ifndef RELAY_CHAN_ID_TRANS_TYPE
+#define RELAY_CHAN_ID_TRANS_TYPE 5
+#endif
+
+// <o> RELAY_RF_FREQ - Relay RF Frequency. 
+#ifndef RELAY_RF_FREQ
+#define RELAY_RF_FREQ 72
+#endif
+
+// <o> RELAY_CHAN_PERIOD - Relay Channel Period (in 32 kHz counts). 
+#ifndef RELAY_CHAN_PERIOD
+#define RELAY_CHAN_PERIOD 8192
+#endif
+
+// <o> ANT_RELAY_MASTER_CHANNEL_NUMBER - Relay master ANT channel number. 
+#ifndef ANT_RELAY_MASTER_CHANNEL_NUMBER
+#define ANT_RELAY_MASTER_CHANNEL_NUMBER 1
+#endif
+
+// <o> ANT_RELAY_SLAVE_CHANNEL_NUMBER - Relay slave ANT channel number. 
+#ifndef ANT_RELAY_SLAVE_CHANNEL_NUMBER
+#define ANT_RELAY_SLAVE_CHANNEL_NUMBER 2
+#endif
+
+// </h> 
+//==========================================================
+
+// <o> RELAY_PROXIMITY_BIN - Proximity bin for slave side of relay channel. 
+#ifndef RELAY_PROXIMITY_BIN
+#define RELAY_PROXIMITY_BIN 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <q> APP_FIFO_ENABLED  - app_fifo - Software FIFO implementation
+ 
+
+#ifndef APP_FIFO_ENABLED
+#define APP_FIFO_ENABLED 1
+#endif
+
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> APP_UART_ENABLED - app_uart - UART driver
+//==========================================================
+#ifndef APP_UART_ENABLED
+#define APP_UART_ENABLED 1
+#endif
+// <o> APP_UART_DRIVER_INSTANCE  - UART instance used
+ 
+// <0=> 0 
+
+#ifndef APP_UART_DRIVER_INSTANCE
+#define APP_UART_DRIVER_INSTANCE 0
+#endif
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 3
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/iar/ant_relay_demo_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/iar/ant_relay_demo_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/iar/ant_relay_demo_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/iar/ant_relay_demo_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/iar/ant_relay_demo_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..4b33b71
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/iar/ant_relay_demo_d52_starterkit_s212.ewp
@@ -0,0 +1,1083 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\fifo</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\uart</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\fifo</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\uart</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_relay_demo_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_relay_demo_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_relay_demo_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\fifo\app_fifo.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\uart\app_uart_fifo.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/iar/ant_relay_demo_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/iar/ant_relay_demo_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/iar/ant_relay_demo_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/ses/ant_relay_demo_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/ses/ant_relay_demo_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..9b222de
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/ses/ant_relay_demo_d52_starterkit_s212.emProject
@@ -0,0 +1,108 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_relay_demo_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_relay_demo_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/fifo;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/uart;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/fifo/app_fifo.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/uart/app_uart_fifo.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/ses/ant_relay_demo_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/ses/ant_relay_demo_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..3b14038
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/ses/ant_relay_demo_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_relay_demo_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/main.c
new file mode 100644
index 0000000..67f17ad
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/main.c
@@ -0,0 +1,555 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2013
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @defgroup nrf_ant_relay_demo ANT Relay Example
+ * @{
+ * @ingroup nrf_ant_relay_demo
+ *
+ * @brief Example of ANT Relay implementation.
+ *
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <string.h>
+#include "app_error.h"
+#include "app_util.h"
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "nrf_soc.h"
+#include "nrf.h"
+#include "bsp.h"
+#include "hardfault.h"
+#include "app_timer.h"
+#include "nrf_pwr_mgmt.h"
+#include "ant_channel_config.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+// Global channel parameters
+#define ANT_RELAY_MAIN_PAGE                 ((uint8_t) 1)               /**< Main status page for relay interface channel. */
+#define ANT_MOBILE_ANT_OBSERVER_PRIO        1                           /**< ANT observer priority. */
+#define ANT_RELAY_MASTER_ANT_OBSERVER_PRIO  1                           /**< Master ANT observer priority. */
+#define ANT_RELAY_SLAVE_ANT_OBSERVER_PRIO   1                           /**< Slave ANT observer priority. */
+
+typedef enum{
+    ANT_LED_STATE_OFF = 0,
+    ANT_LED_STATE_ON  = 1
+} ant_led_state_t;
+
+typedef enum
+{
+    ANT_PAGE_NUMBER_FIELD_OFFSET    = 0,
+    ANT_LED_STATUS_FIELD_OFFSET     = 1,
+    ANT_COUNTER_FIELD_OFFSET        = 2,
+    ANT_STATE_FIELD_OFFSET          = 7
+} ant_message_field_offset_t;
+
+typedef enum
+{
+    ANT_MOBILE_MAIN_PAGE    = 1,    /**< Main status page for mobile interface channel. */
+    ANT_MOBILE_COMMAND_PAGE = 2     /**< Command page for mobile interface (from mobile to device). */
+} ant_mobile_command_t;
+
+typedef enum
+{
+    ANT_COMMAND_PAIRING = 1,
+    ANT_COMMAND_ON      = 2,
+    ANT_COMMAND_OFF     = 3
+} ant_state_command_t;
+
+// Static variables and buffers.
+static uint32_t  m_led_change_counter = 0;
+
+/**@brief Decode and handle the main relay page.
+ *  set the LED if required.
+ *
+ * @param[in] p_payload ANT message 8-byte payload.
+ */
+void ant_relay_main_page_handle(uint8_t* p_payload)
+{
+    uint32_t counter =  uint32_decode(p_payload + ANT_COUNTER_FIELD_OFFSET);
+
+    // If counter changed, set the led to what
+    // we received in the message.
+    if (counter > m_led_change_counter)
+    {
+        uint8_t led_state = p_payload[ANT_LED_STATUS_FIELD_OFFSET];
+        if (led_state == ANT_LED_STATE_ON)
+        {
+            bsp_board_led_on(BSP_BOARD_LED_0);
+        }
+        else
+        {
+            bsp_board_led_off(BSP_BOARD_LED_0);
+        }
+
+        m_led_change_counter = counter;
+    }
+}
+
+/**@brief Function for creating and sending main
+ * relay data page.
+ *
+ * @param[in] channel ANT channel on which to send this message.
+ */
+void ant_relay_main_message_assemble(uint8_t channel)
+{
+    uint8_t status;
+    uint32_t err_code = sd_ant_channel_status_get(ANT_RELAY_SLAVE_CHANNEL_NUMBER, &status);
+    APP_ERROR_CHECK(err_code);
+
+    uint8_t broadcast_data[ANT_STANDARD_DATA_PAYLOAD_SIZE];
+    memset(broadcast_data, 0xFF, sizeof(broadcast_data));
+    broadcast_data[ANT_PAGE_NUMBER_FIELD_OFFSET]  = ANT_RELAY_MAIN_PAGE;
+    broadcast_data[ANT_LED_STATUS_FIELD_OFFSET]   = ( bsp_board_led_state_get(BSP_BOARD_LED_0) )?
+                                                      ANT_LED_STATE_ON : ANT_LED_STATE_OFF;
+    broadcast_data[ANT_STATE_FIELD_OFFSET]        = status & STATUS_CHANNEL_STATE_MASK;
+    UNUSED_RETURN_VALUE(uint32_encode(m_led_change_counter, broadcast_data + ANT_COUNTER_FIELD_OFFSET));
+
+    err_code = sd_ant_broadcast_message_tx(channel, ANT_STANDARD_DATA_PAYLOAD_SIZE, broadcast_data);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Process ANT message on ANT relay master channel
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+void ant_relay_master_process(ant_evt_t * p_ant_evt, void * p_context)
+{
+    ANT_MESSAGE* p_ant_message = (ANT_MESSAGE*)&p_ant_evt->message;
+    switch (p_ant_evt->event)
+    {
+        case EVENT_RX:
+            switch (p_ant_message->ANT_MESSAGE_aucPayload[0])
+            {
+                case ANT_RELAY_MAIN_PAGE:
+                    ant_relay_main_page_handle(p_ant_message->ANT_MESSAGE_aucPayload);
+                    break;
+
+            }
+            break;
+
+        case EVENT_TX:
+            ant_relay_main_message_assemble(ANT_RELAY_MASTER_CHANNEL_NUMBER);
+            break;
+
+        default:
+            break;
+
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_master_observer, ANT_RELAY_MASTER_ANT_OBSERVER_PRIO, ant_relay_master_process, NULL);
+
+/**@brief Process ANT message on ANT slave relay channel
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+void ant_relay_slave_process(ant_evt_t * p_ant_evt, void * p_context)
+{
+    static bool first_recieved = false;
+    if (p_ant_evt->channel != ANT_RELAY_SLAVE_CHANNEL_NUMBER)
+    {
+        return;
+    }
+
+    ANT_MESSAGE* p_ant_message = (ANT_MESSAGE*)&p_ant_evt->message;
+
+
+    switch (p_ant_evt->event)
+    {
+        case EVENT_RX:
+        {
+            switch (p_ant_message->ANT_MESSAGE_aucPayload[0])
+            {
+                case ANT_RELAY_MAIN_PAGE:
+                    ant_relay_main_page_handle(p_ant_message->ANT_MESSAGE_aucPayload);
+                    break;
+
+            }
+
+            bsp_board_led_on(BSP_BOARD_LED_1);
+
+            if (first_recieved)
+            {
+                break;
+            }
+            else
+            {
+                first_recieved = true;
+            }
+        }
+        // fall-through
+
+        case EVENT_TX:
+        {
+            ant_relay_main_message_assemble(ANT_RELAY_SLAVE_CHANNEL_NUMBER);
+            break;
+        }
+        case EVENT_RX_SEARCH_TIMEOUT:
+        {
+            // Channel has closed.
+            // Re-initialize proximity search settings.
+            uint32_t err_code = sd_ant_prox_search_set(ANT_RELAY_SLAVE_CHANNEL_NUMBER, RELAY_PROXIMITY_BIN, 0);
+            APP_ERROR_CHECK(err_code);
+            bsp_board_led_off(BSP_BOARD_LED_1);
+            break;
+        }
+        default:
+        {
+            break;
+        }
+
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_slave_observer, ANT_RELAY_SLAVE_ANT_OBSERVER_PRIO, ant_relay_slave_process, NULL);
+
+/**@brief Process ANT message on ANT mobile interface channel
+ *
+ * @details   This function handles all events on the mobile interface channel.
+ *            On EVENT_TX an ANT_MOBILE_MAIN_PAGE message is queue. The format is:
+ *            byte[0]   = page (1 = ANT_MOBILE_MAIN_PAGE)
+ *            byte[1]   = led state (1 = 0N, 0 = OFF)
+ *            byte[2-6] = reserved (0xFF)
+ *            byte[7]   = relay slave channel status (0 = unnassigned, 1 = assigned, 2 = searching, 3 = tracking)
+ *
+ *            On EVENT_RX the function will decode an ANT_MOBILE_COMMAND_PAGE. The format is:
+ *            byte[0]   = page (2 = ANT_MOBILE_COMMAND_PAGE)
+ *            byte[1]   = reserved (Set to 0xFF)
+ *            byte[2]   = command (1 = pairing, 2 = led on, 3 = led off)
+ *            byte[3-7] = reserved (Set to 0xFF)
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+void ant_mobile_process(ant_evt_t * p_ant_evt, void * p_context)
+{
+    if (p_ant_evt->channel != ANT_MOBILE_CHANNEL_NUMBER)
+    {
+        return;
+    }
+
+    ANT_MESSAGE* p_ant_message = (ANT_MESSAGE*)&p_ant_evt->message;
+
+    switch (p_ant_evt->event)
+    {
+        case EVENT_RX:
+            switch (p_ant_message->ANT_MESSAGE_aucPayload[0])
+            {
+                case ANT_MOBILE_COMMAND_PAGE:
+                    switch (p_ant_message->ANT_MESSAGE_aucPayload[2])
+                    {
+                        case ANT_COMMAND_ON:
+                            bsp_board_led_on(BSP_BOARD_LED_0);
+                            m_led_change_counter++;
+                            break;
+
+                        case ANT_COMMAND_OFF:
+                            bsp_board_led_off(BSP_BOARD_LED_0);
+                            m_led_change_counter++;
+                            break;
+
+                        case ANT_COMMAND_PAIRING:
+                        {
+                            uint8_t channel_status;
+                            uint32_t err_code = sd_ant_channel_status_get(ANT_RELAY_SLAVE_CHANNEL_NUMBER,
+                                                                          &channel_status);
+                            APP_ERROR_CHECK(err_code);
+
+                            if ((channel_status & STATUS_CHANNEL_STATE_MASK) == STATUS_ASSIGNED_CHANNEL)
+                            {
+                                err_code = sd_ant_channel_open(ANT_RELAY_SLAVE_CHANNEL_NUMBER);
+                                APP_ERROR_CHECK(err_code);
+                            }
+                            break;
+                        }
+                    }
+                    break;
+
+                default:
+                    break;
+            }
+            break;
+
+        case EVENT_TX:
+        {
+            uint8_t status;
+
+            uint32_t err_code = sd_ant_channel_status_get(ANT_RELAY_SLAVE_CHANNEL_NUMBER, &status);
+            APP_ERROR_CHECK(err_code);
+
+            uint8_t broadcast_data[ANT_STANDARD_DATA_PAYLOAD_SIZE];
+            memset(broadcast_data, 0xFF, sizeof(broadcast_data));
+            broadcast_data[0] = ANT_MOBILE_MAIN_PAGE;
+            broadcast_data[1] = ( bsp_board_led_state_get(BSP_BOARD_LED_0) )? ANT_LED_STATE_ON : ANT_LED_STATE_OFF;
+            broadcast_data[7] = status & STATUS_CHANNEL_STATE_MASK;
+            err_code          = sd_ant_broadcast_message_tx(ANT_MOBILE_CHANNEL_NUMBER,
+                                                            ANT_STANDARD_DATA_PAYLOAD_SIZE,
+                                                            broadcast_data);
+            APP_ERROR_CHECK(err_code);
+
+            break;
+        }
+        default:
+            break;
+
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_mobile_observer, ANT_MOBILE_ANT_OBSERVER_PRIO, ant_mobile_process, NULL);
+
+/**@brief Function for handling bsp events.
+ */
+void bsp_evt_handler(bsp_event_t evt)
+{
+    switch (evt)
+    {
+        case BSP_EVENT_KEY_0:
+            // Toggle the state of the LED
+            m_led_change_counter++;
+
+            bsp_board_led_invert(BSP_BOARD_LED_0);
+            break;
+
+        case BSP_EVENT_KEY_1:
+        {
+            // Open slave channel
+            uint8_t channel_status;
+            uint32_t err_code = sd_ant_channel_status_get(ANT_RELAY_SLAVE_CHANNEL_NUMBER,
+                                                          &channel_status);
+            APP_ERROR_CHECK(err_code);
+
+            if ((channel_status & STATUS_CHANNEL_STATE_MASK) == STATUS_ASSIGNED_CHANNEL)
+            {
+                err_code = sd_ant_channel_open(ANT_RELAY_SLAVE_CHANNEL_NUMBER);
+                APP_ERROR_CHECK(err_code);
+            }
+            break;
+        }
+
+        default:
+            return; // no implementation needed
+    }
+}
+
+/**
+ * @brief Function for setting up all things not directly associated witch ANT stack/protocol.
+ */
+static void utils_setup(void)
+{
+    // Initialize and start a single continuous mode timer, which is used to update the event time
+    // on the main data page.
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                                 bsp_evt_handler);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**@brief Function for ANT stack initialization.
+ *
+ * @details Initializes the SoftDevice and the ANT event interrupt.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**@brief Function for setting up the ANT channels
+ *
+ */
+static void ant_channel_setup(void)
+{
+    uint32_t err_code;
+
+    // !! CONFIGURE MOBILE CHANNEL !! //
+
+    /* The purpose of the mobile channel is to provide an independent link
+       to a mobile platform using ANT. The mobile channel will report the
+       status of the LED as well as the status of the slave relay channel
+       (closed/open/searching). The mobile channel will also accept commands
+       which emulate the function of the development board. For example, to
+       set the the set the state of the led or to put the device into pairing
+       mode.
+    */
+
+    ant_channel_config_t mobile_channel_config =
+    {
+        .channel_number     = ANT_MOBILE_CHANNEL_NUMBER,
+        .channel_type       = CHANNEL_TYPE_MASTER,
+        .ext_assign         = 0x00,
+        .rf_freq            = MOBILE_RF_FREQ,
+        .transmission_type  = MOBILE_CHAN_ID_TRANS_TYPE,
+        .device_type        = MOBILE_CHAN_ID_DEV_TYPE,
+        .device_number      = (uint16_t) (NRF_FICR->DEVICEID[0]),
+        .channel_period     = MOBILE_CHAN_PERIOD,
+        .network_number     = ANT_NETWORK_NUM,
+    };
+
+    err_code = ant_channel_init(&mobile_channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Open channel right away.
+    err_code = sd_ant_channel_open(ANT_MOBILE_CHANNEL_NUMBER);
+    APP_ERROR_CHECK(err_code);
+
+    // !! CONFIGURE RELAY MASTER CHANNEL !! //
+
+    /* The relay master channel is always on and transmits the
+       status of the LED and the status of the slave relay channel
+       (open/closed/searching). It is 100% bi-directional once
+       a slave connects to it (status updates from the slave are
+       sent on every message period)
+    */
+
+    ant_channel_config_t relay_master_channel_config =
+    {
+        .channel_number     = ANT_RELAY_MASTER_CHANNEL_NUMBER,
+        .channel_type       = CHANNEL_TYPE_MASTER,
+        .ext_assign         = 0x00,
+        .rf_freq            = RELAY_RF_FREQ,
+        .transmission_type  = RELAY_CHAN_ID_TRANS_TYPE,
+        .device_type        = RELAY_CHAN_ID_DEV_TYPE,
+        .device_number      = (uint16_t) (NRF_FICR->DEVICEID[0]),
+        .channel_period     = RELAY_CHAN_PERIOD,
+        .network_number     = ANT_NETWORK_NUM,
+    };
+
+    err_code = ant_channel_init(&relay_master_channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Open channel right away.
+    err_code = sd_ant_channel_open(ANT_RELAY_MASTER_CHANNEL_NUMBER);
+    APP_ERROR_CHECK(err_code);
+
+    // !! CONFIGURE RELAY SLAVE CHANNEL !! //
+
+    /* The purpose of the relay slave channel is to find and synchronize
+       to another devices master really channel. The slave channel is only
+       opened on a button press and uses proximity pairing to connect to a
+       master channel. Once tracking a master the slave channel will send status
+       message back to the master 100% of the time.
+    */
+
+    ant_channel_config_t relay_slave_channel_config =
+    {
+        .channel_number     = ANT_RELAY_SLAVE_CHANNEL_NUMBER,
+        .channel_type       = CHANNEL_TYPE_SLAVE,
+        .ext_assign         = 0x00,
+        .rf_freq            = RELAY_RF_FREQ,
+        .transmission_type  = RELAY_CHAN_ID_TRANS_TYPE,
+        .device_type        = RELAY_CHAN_ID_DEV_TYPE,
+        .device_number      = 0x00,                     // Wildcard
+        .channel_period     = RELAY_CHAN_PERIOD,
+        .network_number     = ANT_NETWORK_NUM,
+    };
+
+    err_code = ant_channel_init(&relay_slave_channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = sd_ant_prox_search_set(ANT_RELAY_SLAVE_CHANNEL_NUMBER, RELAY_PROXIMITY_BIN, 0);
+    APP_ERROR_CHECK(err_code);
+
+    // DO NOT OPEN THE SLAVE RIGHT AWAY - IT OPENS ON BUTTON PRESS
+    // OR MESSAGE FROM MOBILE PHONE
+}
+
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    ant_channel_setup();
+
+    NRF_LOG_INFO("ANT Relay example started.");
+
+    // Main loop.
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/arm4/ant_relay_demo_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/arm4/ant_relay_demo_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/arm4/ant_relay_demo_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/arm4/ant_relay_demo_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/arm4/ant_relay_demo_pca10040_s212.uvproj
new file mode 100644
index 0000000..710a0ae
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/arm4/ant_relay_demo_pca10040_s212.uvproj
@@ -0,0 +1,554 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\fifo;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\fifo;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_fifo.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\fifo\app_fifo.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_uart_fifo.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\uart\app_uart_fifo.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/arm5_no_packs/ant_relay_demo_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/arm5_no_packs/ant_relay_demo_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/arm5_no_packs/ant_relay_demo_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/arm5_no_packs/ant_relay_demo_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/arm5_no_packs/ant_relay_demo_pca10040_s212.uvprojx
new file mode 100644
index 0000000..0db8f7e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/arm5_no_packs/ant_relay_demo_pca10040_s212.uvprojx
@@ -0,0 +1,578 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\fifo;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\fifo;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\uart;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_fifo.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\fifo\app_fifo.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_uart_fifo.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\uart\app_uart_fifo.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..2ce4a1d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,192 @@
+PROJECT_NAME     := ant_relay_demo_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_relay_demo_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/fifo/app_fifo.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/uart/app_uart_fifo.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/fifo \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/uart \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/armgcc/ant_relay_demo_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/armgcc/ant_relay_demo_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/armgcc/ant_relay_demo_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..04897c7
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3935 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <h> MOBILE CHANNEL 
+
+//==========================================================
+// <o> MOBILE_CHAN_ID_DEV_TYPE - Mobile Channel ID: Device Type. 
+#ifndef MOBILE_CHAN_ID_DEV_TYPE
+#define MOBILE_CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> MOBILE_CHAN_ID_TRANS_TYPE - Mobile Channel ID: Transmission type. 
+#ifndef MOBILE_CHAN_ID_TRANS_TYPE
+#define MOBILE_CHAN_ID_TRANS_TYPE 5
+#endif
+
+// <o> MOBILE_RF_FREQ - Mobile RF Frequency. 
+#ifndef MOBILE_RF_FREQ
+#define MOBILE_RF_FREQ 77
+#endif
+
+// <o> MOBILE_CHAN_PERIOD - Mobile Channel Period (in 32 kHz counts). 
+#ifndef MOBILE_CHAN_PERIOD
+#define MOBILE_CHAN_PERIOD 8192
+#endif
+
+// <o> ANT_MOBILE_CHANNEL_NUMBER - Mobile ANT channel number. 
+#ifndef ANT_MOBILE_CHANNEL_NUMBER
+#define ANT_MOBILE_CHANNEL_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> RELAY CHANNEL 
+
+//==========================================================
+// <o> RELAY_CHAN_ID_DEV_TYPE - Relay Channel ID: Device Type. 
+#ifndef RELAY_CHAN_ID_DEV_TYPE
+#define RELAY_CHAN_ID_DEV_TYPE 1
+#endif
+
+// <o> RELAY_CHAN_ID_TRANS_TYPE - Relay Channel ID: Transmission type. 
+#ifndef RELAY_CHAN_ID_TRANS_TYPE
+#define RELAY_CHAN_ID_TRANS_TYPE 5
+#endif
+
+// <o> RELAY_RF_FREQ - Relay RF Frequency. 
+#ifndef RELAY_RF_FREQ
+#define RELAY_RF_FREQ 72
+#endif
+
+// <o> RELAY_CHAN_PERIOD - Relay Channel Period (in 32 kHz counts). 
+#ifndef RELAY_CHAN_PERIOD
+#define RELAY_CHAN_PERIOD 8192
+#endif
+
+// <o> ANT_RELAY_MASTER_CHANNEL_NUMBER - Relay master ANT channel number. 
+#ifndef ANT_RELAY_MASTER_CHANNEL_NUMBER
+#define ANT_RELAY_MASTER_CHANNEL_NUMBER 1
+#endif
+
+// <o> ANT_RELAY_SLAVE_CHANNEL_NUMBER - Relay slave ANT channel number. 
+#ifndef ANT_RELAY_SLAVE_CHANNEL_NUMBER
+#define ANT_RELAY_SLAVE_CHANNEL_NUMBER 2
+#endif
+
+// </h> 
+//==========================================================
+
+// <o> RELAY_PROXIMITY_BIN - Proximity bin for slave side of relay channel. 
+#ifndef RELAY_PROXIMITY_BIN
+#define RELAY_PROXIMITY_BIN 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <q> APP_FIFO_ENABLED  - app_fifo - Software FIFO implementation
+ 
+
+#ifndef APP_FIFO_ENABLED
+#define APP_FIFO_ENABLED 1
+#endif
+
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> APP_UART_ENABLED - app_uart - UART driver
+//==========================================================
+#ifndef APP_UART_ENABLED
+#define APP_UART_ENABLED 1
+#endif
+// <o> APP_UART_DRIVER_INSTANCE  - UART instance used
+ 
+// <0=> 0 
+
+#ifndef APP_UART_DRIVER_INSTANCE
+#define APP_UART_DRIVER_INSTANCE 0
+#endif
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 3
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/iar/ant_relay_demo_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/iar/ant_relay_demo_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/iar/ant_relay_demo_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/iar/ant_relay_demo_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/iar/ant_relay_demo_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/iar/ant_relay_demo_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/iar/ant_relay_demo_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/iar/ant_relay_demo_pca10040_s212.ewp
new file mode 100644
index 0000000..b4fb825
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/iar/ant_relay_demo_pca10040_s212.ewp
@@ -0,0 +1,1086 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\fifo</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\uart</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\fifo</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\uart</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_relay_demo_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_relay_demo_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_relay_demo_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\fifo\app_fifo.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\uart\app_uart_fifo.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/ses/ant_relay_demo_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/ses/ant_relay_demo_pca10040_s212.emProject
new file mode 100644
index 0000000..9007e4b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/ses/ant_relay_demo_pca10040_s212.emProject
@@ -0,0 +1,107 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_relay_demo_pca10040_s212" target="8" version="2">
+  <project Name="ant_relay_demo_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/fifo;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/uart;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/fifo/app_fifo.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/uart/app_uart_fifo.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/ses/ant_relay_demo_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/ses/ant_relay_demo_pca10040_s212.emSession
new file mode 100644
index 0000000..13a22d7
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/ses/ant_relay_demo_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_relay_demo_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_relay_demo/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/ant_scan_and_forward.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/ant_scan_and_forward.eww
new file mode 100644
index 0000000..0498152
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/ant_scan_and_forward.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_scan_and_forward_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_scan_and_forward_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/commands.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/commands.h
new file mode 100644
index 0000000..8892f19
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/commands.h
@@ -0,0 +1,131 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @brief Commands used in ANT Scan and Forward
+ *
+ * @defgroup ant_scan_and_forward_example ANT Scan and Forward Demo
+ * @{
+ * @ingroup nrf_ant_scan_and_forward
+ *
+ */
+
+#ifndef __COMMANDS_H__
+#define __COMMANDS_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Page numbers
+
+#define DATA_PAGE_IND                   0
+#define MOBILE_COMMAND_PAGE             ((uint8_t) 0x10)    /**< Data page for sending control commands */
+#define DEVICE_STATUS_PAGE              ((uint8_t) 0x20)    /**< Data page for sending the device status */
+#define INTERNAL_COMMAND_PAGE           ((uint8_t) 0x30)    /**< Data page for sending control commands inside the network */
+
+// Page Indices for Device Status Data Page
+
+#define DEVICE_STATUS_NODE_IND          1
+#define DEVICE_STATUS_SEQ_NUM_IND       6
+#define DEVICE_STATUS_STATE_IND         7
+
+// Page Indices for Internal Command Data Page
+
+#define INTERNAL_CMD_DST_IND            1
+#define INTERNAL_CMD_SEQ_NUM_IND        6
+#define INTERNAL_CMD_CMD_IND            7
+#define INTERNAL_CMD_CMD_DATA1_IND      5
+#define INTERNAL_CMD_CMD_DATA2_IND      4
+
+// Page Indices for Mobile Command Data Page
+
+#define MOBILE_CMD_DST_IND              2
+#define MOBILE_CMD_CMD_IND              7
+#define MOBILE_CMD_CMD_DATA1_IND        5                   /**< Configuration Command - Command Page Rotation % */
+#define MOBILE_CMD_CMD_DATA2_IND        4                   /**< Configuration Command - Command Page Hi Priority */
+
+// Page Indices for BLE Command Page
+
+#define BLE_CMD_DST_IND                 1
+#define BLE_CMD_DATA0_IND               2
+#define BLE_CMD_DATA1_IND               3
+#define BLE_CMD_DATA2_IND               4
+
+// Device status
+
+#define STATUS_LIGHT_OFF                ((uint8_t) 0x00)    /**< Device light is currently off */
+#define STATUS_LIGHT_ON                 ((uint8_t) 0x01)    /**< Device light is currently on */
+
+// Device command - Light
+
+#define COMMAND_LIGHT_OFF               ((uint8_t) 0x00)    /**< Turn off device light */
+#define COMMAND_LIGHT_ON                ((uint8_t) 0x01)    /**< Turn on device light */
+
+// Device command - Configuration
+
+#define COMMAND_CHG_CMD_PG_SET          ((uint8_t) 0x03)    /**< Change the device's internal page rotation */
+#define SUBCOMMAND_ENABLE_HI_PRI_CMD    ((uint8_t) 0x01)    /**< Enable the high priority command page feature */
+#define SUBCOMMAND_DISABLE_HI_PRI_CMD   ((uint8_t) 0x00)    /**< Disable the high priority command page feature */
+
+#define ADDRESS_ALL_NODES               ((uint8_t) 0x00)                /**< Send command to all nodes  */
+
+#define RESERVED                        ((uint8_t) 0xFF)                /**< Reserved/Invalid value  */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+/**
+ *@}
+ **/
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/arm4/ant_scan_and_forward_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/arm4/ant_scan_and_forward_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/arm4/ant_scan_and_forward_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/arm4/ant_scan_and_forward_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/arm4/ant_scan_and_forward_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..7db0bbc
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/arm4/ant_scan_and_forward_d52_starterkit_s212.uvproj
@@ -0,0 +1,563 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 DEBUG FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DDEBUG,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 DEBUG FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>deviceregistry.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\deviceregistry.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>message_cache.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\message_cache.c</FilePath>            </File>            <File>
+              <FileName>scan_and_forward.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\scan_and_forward.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/arm5_no_packs/ant_scan_and_forward_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/arm5_no_packs/ant_scan_and_forward_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/arm5_no_packs/ant_scan_and_forward_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/arm5_no_packs/ant_scan_and_forward_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/arm5_no_packs/ant_scan_and_forward_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..321503c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/arm5_no_packs/ant_scan_and_forward_d52_starterkit_s212.uvprojx
@@ -0,0 +1,587 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 DEBUG FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DDEBUG,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 DEBUG FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>deviceregistry.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\deviceregistry.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>message_cache.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\message_cache.c</FilePath>            </File>            <File>
+              <FileName>scan_and_forward.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\scan_and_forward.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..e4140c9
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,192 @@
+PROJECT_NAME     := ant_scan_and_forward_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_scan_and_forward_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/deviceregistry.c \
+  $(PROJ_DIR)/main.c \
+  $(PROJ_DIR)/message_cache.c \
+  $(PROJ_DIR)/scan_and_forward.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DDEBUG
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DDEBUG
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/armgcc/ant_scan_and_forward_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/armgcc/ant_scan_and_forward_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/armgcc/ant_scan_and_forward_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..b0b972e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3953 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_BS_CHANNEL_NUMBER - Used ANT channel number. 
+#ifndef ANT_BS_CHANNEL_NUMBER
+#define ANT_BS_CHANNEL_NUMBER 0
+#endif
+
+// <o> ANT_MS_CHANNEL_NUMBER - Used ANT channel number. 
+#ifndef ANT_MS_CHANNEL_NUMBER
+#define ANT_MS_CHANNEL_NUMBER 1
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CACHE_TIMEOUT_S - Max duration cached messages will be saved. 
+#ifndef CACHE_TIMEOUT_S
+#define CACHE_TIMEOUT_S 10
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 1024
+#endif
+
+// <o> MAX_CACHE_SIZE - Max size of the received message buffer. 
+#ifndef MAX_CACHE_SIZE
+#define MAX_CACHE_SIZE 255
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 25
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 2
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/iar/ant_scan_and_forward_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/iar/ant_scan_and_forward_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/iar/ant_scan_and_forward_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/iar/ant_scan_and_forward_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/iar/ant_scan_and_forward_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..282348f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/iar/ant_scan_and_forward_d52_starterkit_s212.ewp
@@ -0,0 +1,1085 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>DEBUG</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>DEBUG</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_scan_and_forward_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_scan_and_forward_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_scan_and_forward_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\deviceregistry.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\message_cache.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\scan_and_forward.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/iar/ant_scan_and_forward_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/iar/ant_scan_and_forward_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/iar/ant_scan_and_forward_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/ses/ant_scan_and_forward_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/ses/ant_scan_and_forward_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..57158a9
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/ses/ant_scan_and_forward_d52_starterkit_s212.emProject
@@ -0,0 +1,110 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_scan_and_forward_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_scan_and_forward_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/ant/ant_search_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;DEBUG;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../deviceregistry.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../../../message_cache.c" />
+      <file file_name="../../../scan_and_forward.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/ses/ant_scan_and_forward_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/ses/ant_scan_and_forward_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..cd431fd
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/ses/ant_scan_and_forward_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_scan_and_forward_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/deviceregistry.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/deviceregistry.c
new file mode 100644
index 0000000..3faa38f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/deviceregistry.c
@@ -0,0 +1,216 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @brief Device registry used in the scan and forward demo
+ *
+ * @defgroup ant_scan_and_forward_example ANT Scan and Forward Demo
+ * @{
+ * @ingroup nrf_ant_scan_and_forward
+ *
+ */
+
+#include "deviceregistry.h"
+#include "commands.h"
+
+#define NODE_ID_TO_INDEX_CONVERT(node_id) (node_id % MAX_DEVICES)   /**< Hash function */
+
+static deviceregistry_t device_registry;                            /**< Device resistry of all nodes */
+
+/** @brief Initializes entries in the device registry to invalid
+ *
+ * @param[in] p_device Pointer to device to initialize
+ */
+static void dr_init_device(device_t * p_device)
+{
+    p_device->node_id                        = NODE_ID_INVALID;
+    p_device->ant_channel                    = ANT_CHANNEL_NOT_CONNECTED;
+    p_device->last_message_sequence_received = 0;
+    p_device->application_state              = 0;
+}
+
+
+void dr_init(void)
+{
+    device_registry.count = 0;
+
+    for (int i = 0; i < MAX_DEVICES; i++)
+    {
+        dr_init_device(&device_registry.devices[i]);
+    }
+}
+
+
+bool dr_device_add(uint8_t node_id)
+{
+    uint8_t index = MAX_DEVICES;                       // Specifed maximum total number in the array
+    uint8_t start = NODE_ID_TO_INDEX_CONVERT(node_id); // Start index of the array
+
+    uint8_t id;
+
+    for (int i = 0; i < MAX_DEVICES; i++ )
+    {
+        id = device_registry.devices[(start + i) % MAX_DEVICES].node_id;
+
+        if (id == node_id) // If this node already exists, return false.
+        {
+            return false;
+        }
+
+        if (id == NODE_ID_INVALID) // If we found a place to put it
+        {   // Find the best place to put this node (the place closest to the hash function result)
+            index = (start + i) % MAX_DEVICES;
+            break;
+        }
+    }
+
+    if (index == MAX_DEVICES)
+    {
+        return false;
+    }
+
+    device_registry.devices[index].node_id = node_id;
+    device_registry.count++;
+    return true;
+}
+
+
+bool dr_device_remove(uint8_t node_id)
+{
+    uint8_t index = NODE_ID_TO_INDEX_CONVERT(node_id);
+    uint8_t start = index;
+
+    for (int i = 0; i < MAX_DEVICES; i++ )
+    {
+        if (device_registry.devices[(start + i) % MAX_DEVICES].node_id == node_id)
+        {
+            // Remove the device
+            dr_init_device(&device_registry.devices[index]);
+            device_registry.count--;
+            return true;
+        }
+        else
+            index++;
+    }
+    return false;
+}
+
+
+bool dr_is_full(void)
+{
+    return (device_registry.count >= MAX_DEVICES);
+}
+
+
+device_t * dr_device_get(uint8_t node_id)
+{
+    uint8_t index = NODE_ID_TO_INDEX_CONVERT(node_id);
+    uint8_t start = index;
+
+    for (int i = 0; i < MAX_DEVICES; i++ )
+    {
+        if (device_registry.devices[(start + i) % MAX_DEVICES].node_id == node_id)
+        {
+            return &(device_registry.devices[(start + i) % MAX_DEVICES]);
+        }
+        else
+        {
+            index++;
+        }
+    }
+    return NULL; // Doesnt exist
+}
+
+
+device_t * dr_device_at_index_get(uint8_t index)
+{
+    return &(device_registry.devices[index]);
+}
+
+
+bool dr_device_exists(uint8_t node_id)
+{
+    uint8_t start = NODE_ID_TO_INDEX_CONVERT(node_id);
+
+    for (int i = 0; i < MAX_DEVICES; i++ )
+    {
+        if (device_registry.devices[(start + i) % MAX_DEVICES].node_id == node_id)
+        {
+            return true;
+        }
+    }
+    return false;
+}
+
+
+bool dr_device_at_index_exists(uint8_t index)
+{
+    return (device_registry.devices[index].node_id != NODE_ID_INVALID ? true : false);
+}
+
+
+uint8_t dr_index_of_node_get(uint8_t node_id)
+{
+    uint8_t start = NODE_ID_TO_INDEX_CONVERT(node_id);
+
+    for (int i = 0; i < MAX_DEVICES; i++ )
+    {
+        if (device_registry.devices[(start + i) % MAX_DEVICES].node_id == node_id)
+        {
+            return (start + i) % MAX_DEVICES;
+        }
+    }
+    return 0;
+}
+
+
+/**
+ *@}
+ **/
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/deviceregistry.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/deviceregistry.h
new file mode 100644
index 0000000..f44a24e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/deviceregistry.h
@@ -0,0 +1,171 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2014
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @brief Device registry used in the scan and forward demo
+ * This module is responsible for management of the device registry used to store information about peripheral devices that have registered wih the hub
+ *
+ * @defgroup ant_scan_and_forward_example ANT Scan and Forward Demo
+ * @{
+ * @ingroup nrf_ant_scan_and_forward
+ *
+ */
+
+#ifndef __DEVICEREGISTRY_H__
+#define __DEVICEREGISTRY_H__
+
+#include <stdint.h>
+#include <stdio.h>
+#include <stdbool.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Public Definitions
+#define MAX_DEVICES                 ((uint8_t) 16)              /**< Maximum number of devices in that can be registered */
+#define NODE_ID_INVALID             ((uint8_t) 0xFF)            /**< Invalid node identifier */
+#define ANT_CHANNEL_NOT_CONNECTED   ((uint8_t) 0xFF)            /**< Not directly connected to a particular device */
+#define ANT_CHANNEL_SELF            ((uint8_t) 0xFE)            /**< Local node */
+
+
+/**@brief Data structure for each device.
+ */
+typedef struct
+{
+    uint8_t node_id;                        /**< Node ID of the device */
+    uint8_t ant_channel;                    /**< ANT channel the device is directly connected to. 0xFF if not connected. */
+    uint8_t application_state;              /**< Device application state (i.e., light on/off) */
+    uint8_t last_message_sequence_received; /**< Sequence number in last message received from device */
+} device_t;
+
+/**@brief Data structure for device list
+ */
+typedef struct
+{
+    uint8_t  count;                /**< Total number of registered devices */
+    device_t devices[MAX_DEVICES]; /**< List of registered devices */
+} deviceregistry_t;
+
+
+/** @brief Initializes the device registry
+ */
+void dr_init(void);
+
+/** @brief Add a device to the registry
+ *
+ * @param[in] node_id   The node id to add
+ * @returns True if the device was added, false if it cannot be added
+ */
+bool dr_device_add(uint8_t node_id);
+
+/** @brief Remove a device to the registry
+ *
+ * @param[in] node_id   The node id to remove
+ * @returns True if the device was removed, false if it cannot be removed
+ */
+bool dr_device_remove(uint8_t node_id);
+
+/** @brief Checks if device registry is full
+ *
+ * @returns True if the number of registered devices is the maximum allowed
+ */
+bool dr_is_full(void);
+
+/** @brief Gets device with specified node id
+ *
+ * @param[in] node_id The id of the node to get
+
+ * @returns Pointer the the registered device with a specified node ID.
+ * @returns NULL if it doesnt exist
+ */
+device_t * dr_device_get(uint8_t node_id);
+
+/** @brief Gets device at the specifed index
+ *
+ * @param[in] index The id of the node to get
+ * @returns Pointer the the device
+ */
+device_t * dr_device_at_index_get(uint8_t index);
+
+/** @brief Checks if a device already exists in the device table
+ *
+ * @param[in] node_id The id of the node to check
+ * @returns True if device exists
+ */
+bool dr_device_exists(uint8_t node_id);
+
+/** @brief Checks if a device already exists in the device table at the specifed index
+ *
+ * @param[in] index The index at which to check
+ * @returns True if device exists, false otherwise
+ */
+bool dr_device_at_index_exists(uint8_t index);
+
+/** @brief Gets the device index with specified node id
+ *
+ * @param[in] node_id The id of the node to get
+
+ * @returns The index of the device with node_id.
+ * @returns 0 if it doesnt exist
+ */
+uint8_t dr_index_of_node_get(uint8_t node_id);
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+/**
+ *@}
+ **/
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/main.c
new file mode 100644
index 0000000..c5fba3b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/main.c
@@ -0,0 +1,159 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @brief The main file for the ANT Scan and Forward demo.
+ *
+ * @defgroup ant_scan_and_forward_example ANT Scan and Forward Demo
+ * @{
+ * @ingroup nrf_ant_scan_and_forward
+ *
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "nrf.h"
+#include "bsp.h"
+#include "boards.h"
+#include "hardfault.h"
+#include "nrf_gpio.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "commands.h"
+#include "scan_and_forward.h"
+#include "ant_parameters.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+/**@brief Function for the Timer and BSP initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                        sf_bsp_evt_handler);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for ANT stack initialization.
+ *
+ * @details Initializes the SoftDevice and the ANT event interrupt.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Initializes the battery board switches as inputs.
+ */
+void switch_init(void)
+{
+#if defined(BSP_SWITCH_0) && defined(BSP_SWITCH_1) && defined(BSP_SWITCH_2) && \
+    defined(BSP_SWITCH_3) && defined(BSP_SWITCH_4) // Only initialize switches on boards which have switches defined
+    nrf_gpio_cfg_input(BSP_SWITCH_0, SWITCH_PULL);
+    nrf_gpio_cfg_input(BSP_SWITCH_1, SWITCH_PULL);
+    nrf_gpio_cfg_input(BSP_SWITCH_2, SWITCH_PULL);
+    nrf_gpio_cfg_input(BSP_SWITCH_3, SWITCH_PULL);
+    nrf_gpio_cfg_input(BSP_SWITCH_4, SWITCH_PULL);
+#endif
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/** @brief The main function
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    switch_init();
+    softdevice_setup();
+    sf_init();
+
+    NRF_LOG_INFO("ANT Scan and Forward example started.");
+
+    // Enter main loop
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/message_cache.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/message_cache.c
new file mode 100644
index 0000000..0a15353
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/message_cache.c
@@ -0,0 +1,206 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#include <string.h>
+#include "message_cache.h"
+#include "nordic_common.h"
+
+static bool mc_pop(message_cache_t * p_mc);
+static bool mc_compare(uint8_t * p_msg, sf_message_t * p_opt_msg);
+
+void mc_clear(message_cache_t * p_mc)
+{
+    if (p_mc == NULL)
+    {
+        return;
+    }
+
+    p_mc->back  = 0;
+    p_mc->front = 0;
+    p_mc->count = 0;
+}
+
+void mc_add(message_cache_t * p_mc, uint8_t * p_message)
+{
+    // If the cache is full, delete an old element to make room for the new one
+    if (p_mc->count >= p_mc->size)
+    {
+        UNUSED_PARAMETER(mc_pop(p_mc));
+    }
+
+    // Copy new element into the queue
+    // Convert from ANT message format into optimized struct
+    p_mc->buffer[p_mc->back].page  = p_message[0];
+    p_mc->buffer[p_mc->back].dst   = p_message[1];
+    p_mc->buffer[p_mc->back].seq   = p_message[6];
+    p_mc->buffer[p_mc->back].data  = p_message[7];
+    p_mc->buffer[p_mc->back].pay0  = p_message[5];
+    p_mc->buffer[p_mc->back].pay1  = p_message[4];
+    p_mc->buffer[p_mc->back].ticks = 0;
+
+    p_mc->back = (p_mc->back == (p_mc->size - 1)) ? 0 : p_mc->back + 1;
+    p_mc->count++;
+}
+
+
+bool mc_is_in_cache(message_cache_t * p_mc, uint8_t * p_message)
+{
+    if (p_mc->count == 0)
+    {
+        return false;
+    }
+
+    uint8_t iter = p_mc->front;
+
+    for (int i = 0; i < p_mc->count; i++)
+    {
+        if (mc_compare(p_message, &p_mc->buffer[iter]))
+        {
+            return true;
+        }
+
+        iter = (iter == (p_mc->size - 1)) ? 0 : iter + 1;
+    }
+    return false;
+}
+
+
+void mc_cleanup(message_cache_t * p_mc, uint8_t max_ticks)
+{
+    if (p_mc->count == 0)
+    {
+        return;
+    }
+
+    uint8_t size        = p_mc->count;
+    uint8_t iter        = p_mc->front;
+    bool    msg_expired = false;
+
+    for (int i = 0; i < size; i++)
+    {
+        p_mc->buffer[iter].ticks++;
+
+        if (p_mc->buffer[iter].ticks >= max_ticks)
+        {
+            msg_expired = true;
+        }
+
+        iter = (iter == (p_mc->size - 1)) ? 0 : iter + 1;
+
+        if (msg_expired)
+        {
+            p_mc->front = iter;
+            p_mc->count--;
+        }
+    }
+}
+
+
+/**@brief Pop message from cache
+ *
+ * @param p_mc          Pointer to message cache struct
+ *
+ * @return  true if able to pop item
+ */
+static bool mc_pop(message_cache_t * p_mc)
+{
+    if (p_mc->count == 0)
+    {
+        return false;
+    }
+
+    p_mc->front = (p_mc->front == (p_mc->size - 1)) ? 0 : p_mc->front + 1;
+    p_mc->count--;
+    return true;
+}
+
+
+/**@brief Compare a raw ANT message with optimized messagestruct
+ * @param p_msg         Pointer to raw ANT message
+ * @param p_opt_msg     Pointer to optimized message struct
+ * @return true if the values match, false otherwise
+ */
+static bool mc_compare(uint8_t * p_msg, sf_message_t * p_opt_msg)
+{
+    bool result = true;
+
+    if (p_opt_msg->page != p_msg[0])
+    {
+        result = false;
+    }
+
+    if (p_opt_msg->dst != p_msg[1])
+    {
+        result = false;
+    }
+
+    if (p_opt_msg->seq != p_msg[6])
+    {
+        result = false;
+    }
+
+    if (p_opt_msg->data != p_msg[7])
+    {
+        result = false;
+    }
+
+    if (p_opt_msg->pay0 != p_msg[5])
+    {
+        result = false;
+    }
+
+    if (p_opt_msg->pay1 != p_msg[4])
+    {
+        result = false;
+    }
+
+    return result;
+}
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/message_cache.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/message_cache.h
new file mode 100644
index 0000000..4873b12
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/message_cache.h
@@ -0,0 +1,115 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#ifndef __MESSAGE_CACHE_H__
+#define __MESSAGE_CACHE_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct
+{
+    uint8_t dst;
+    uint8_t page;
+    uint8_t data;
+    uint8_t pay0;
+    uint8_t pay1;
+    uint8_t seq;
+    uint8_t ticks;
+} sf_message_t;
+
+typedef struct
+{
+    uint8_t          front;
+    uint8_t          back;
+    uint8_t          count;
+    uint8_t          size;
+    sf_message_t * buffer;
+} message_cache_t;
+
+
+/**@brief Empty message cache.
+ *
+ * @param p_mc          Pointer to message cache struct
+ */
+void mc_clear(message_cache_t * p_mc);
+
+/**@brief Add message to cache. Old messages are deleted to make room if full.
+ *
+ * @param p_mc          Pointer to message cache struct
+ * @param p_message     Pointer to message to add
+ */
+void mc_add(message_cache_t * p_mc, uint8_t * p_message);
+
+/**@brief Check if message is in cache.
+ *
+ * @param p_mc          Pointer to message cache struct
+ * @param p_message     Pointer to message to check
+ * @return True if message is already in cache
+ */
+bool mc_is_in_cache(message_cache_t * p_mc, uint8_t * p_message);
+
+/**@brief Purge messages older than given value.
+ *
+ * @param p_mc          Pointer to message cache struct
+ * @param max_ticks     Maximum number of ticks for messages to stay in cache
+ */
+void mc_cleanup(message_cache_t * p_mc, uint8_t max_ticks);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/arm4/ant_scan_and_forward_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/arm4/ant_scan_and_forward_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/arm4/ant_scan_and_forward_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/arm4/ant_scan_and_forward_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/arm4/ant_scan_and_forward_pca10040_s212.uvproj
new file mode 100644
index 0000000..008c101
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/arm4/ant_scan_and_forward_pca10040_s212.uvproj
@@ -0,0 +1,560 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET DEBUG FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DDEBUG,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET DEBUG FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>deviceregistry.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\deviceregistry.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>message_cache.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\message_cache.c</FilePath>            </File>            <File>
+              <FileName>scan_and_forward.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\scan_and_forward.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/arm5_no_packs/ant_scan_and_forward_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/arm5_no_packs/ant_scan_and_forward_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/arm5_no_packs/ant_scan_and_forward_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/arm5_no_packs/ant_scan_and_forward_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/arm5_no_packs/ant_scan_and_forward_pca10040_s212.uvprojx
new file mode 100644
index 0000000..bbcc804
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/arm5_no_packs/ant_scan_and_forward_pca10040_s212.uvprojx
@@ -0,0 +1,584 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET DEBUG FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DDEBUG,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET DEBUG FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>deviceregistry.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\deviceregistry.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>message_cache.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\message_cache.c</FilePath>            </File>            <File>
+              <FileName>scan_and_forward.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\scan_and_forward.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..eeb1211
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,195 @@
+PROJECT_NAME     := ant_scan_and_forward_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_scan_and_forward_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/deviceregistry.c \
+  $(PROJ_DIR)/main.c \
+  $(PROJ_DIR)/message_cache.c \
+  $(PROJ_DIR)/scan_and_forward.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DDEBUG
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DDEBUG
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/armgcc/ant_scan_and_forward_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/armgcc/ant_scan_and_forward_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/armgcc/ant_scan_and_forward_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..36617eb
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3897 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_BS_CHANNEL_NUMBER - Used ANT channel number. 
+#ifndef ANT_BS_CHANNEL_NUMBER
+#define ANT_BS_CHANNEL_NUMBER 0
+#endif
+
+// <o> ANT_MS_CHANNEL_NUMBER - Used ANT channel number. 
+#ifndef ANT_MS_CHANNEL_NUMBER
+#define ANT_MS_CHANNEL_NUMBER 1
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CACHE_TIMEOUT_S - Max duration cached messages will be saved. 
+#ifndef CACHE_TIMEOUT_S
+#define CACHE_TIMEOUT_S 10
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 1
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 1024
+#endif
+
+// <o> MAX_CACHE_SIZE - Max size of the received message buffer. 
+#ifndef MAX_CACHE_SIZE
+#define MAX_CACHE_SIZE 255
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 25
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 2
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/iar/ant_scan_and_forward_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/iar/ant_scan_and_forward_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/iar/ant_scan_and_forward_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/iar/ant_scan_and_forward_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/iar/ant_scan_and_forward_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/iar/ant_scan_and_forward_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/iar/ant_scan_and_forward_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/iar/ant_scan_and_forward_pca10040_s212.ewp
new file mode 100644
index 0000000..e629292
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/iar/ant_scan_and_forward_pca10040_s212.ewp
@@ -0,0 +1,1088 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>DEBUG</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>DEBUG</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_scan_and_forward_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_scan_and_forward_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_scan_and_forward_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\deviceregistry.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\message_cache.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\scan_and_forward.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/ses/ant_scan_and_forward_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/ses/ant_scan_and_forward_pca10040_s212.emProject
new file mode 100644
index 0000000..848972e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/ses/ant_scan_and_forward_pca10040_s212.emProject
@@ -0,0 +1,109 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_scan_and_forward_pca10040_s212" target="8" version="2">
+  <project Name="ant_scan_and_forward_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/ant/ant_search_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;DEBUG;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../deviceregistry.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../../../message_cache.c" />
+      <file file_name="../../../scan_and_forward.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/ses/ant_scan_and_forward_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/ses/ant_scan_and_forward_pca10040_s212.emSession
new file mode 100644
index 0000000..3db4446
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/ses/ant_scan_and_forward_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_scan_and_forward_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/scan_and_forward.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/scan_and_forward.c
new file mode 100644
index 0000000..b3c53a0
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/scan_and_forward.c
@@ -0,0 +1,607 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @brief ANT Scan and Forward implementation
+ *
+ * @defgroup ant_scan_and_forward_example ANT Scan and Forward Demo
+ * @{
+ * @ingroup nrf_ant_scan_and_forward
+ *
+ */
+
+#include <stdbool.h>
+#include "scan_and_forward.h"
+#include "deviceregistry.h"
+#include "ant_parameters.h"
+#include "message_cache.h"
+#include "commands.h"
+#include "boards.h"
+#include "app_button.h"
+#include "nrf_delay.h"
+#include "ant_channel_config.h"
+#include "ant_search_config.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+
+#define ANT_SF_NETWORK_ID           ((uint8_t) 1)       /**< Network Number for Scan and Forward Application */
+#define CHAN_ID_TRANS_TYPE          ((uint8_t) ((ANT_SF_NETWORK_ID << 4) | 0x05))   /**< Transmission type is comprised of ANT_SF_NETWORK_ID and 0x05 */
+#define DEFAULT_CMD_PG_INTLV_PCT    30                  /**< Default percentage internal command pages should be transmitted */
+
+#define ANT_BS_ANT_OBSERVER_PRIO    1                   /**< BS ANT observer priority. */
+#define ANT_MS_ANT_OBSERVER_PRIO    1                   /**< MS ANT observer priority. */
+
+static uint8_t m_node_address;                                          /**< Unique address of node within the network */
+static uint8_t m_counter = 0;                                           /**< Index of next device */
+static uint8_t m_tx_buffer[ANT_STANDARD_DATA_PAYLOAD_SIZE];             /**< Primary data transmit buffer. */
+static uint8_t m_cmd_tx_buffer[ANT_STANDARD_DATA_PAYLOAD_SIZE];         /**< Command data transmit buffer. */
+static uint8_t m_tx_page_counter        = 0;                            /**< Transmitted page counter. */
+static uint8_t m_cache_tick_tx_counter  = 0;                            /**< Transmitted page counter for cache tick management. */
+static uint8_t m_cmd_pg_intlv_pct       = DEFAULT_CMD_PG_INTLV_PCT;     /**< Percentage of the time internal command pages should be transmitted */
+static bool    m_flag_hi_pri_cmd        = false;                        /**< Flag to indicate this is a new command. */
+
+static bool             enable_optimized_command_page_priority = true;  /**< Flag to enable/disable command page pattern optimizations */
+static sf_message_t     buffer[MAX_CACHE_SIZE];                         /**< Received message cache buffer. */
+static message_cache_t  m_rcvd_messages =                               /**< Received message cache. */
+{
+    0,
+    0,
+    0,
+    MAX_CACHE_SIZE,
+    buffer
+};
+
+
+/**@brief DEVICE_STATUS_PAGE message is queued to send.
+ *
+ */
+static void sf_master_beacon_message_send(void);
+
+
+/**@brief Checks if a message has already been received
+ *
+ * @param[in]   p_buffer            Pointer to buffer with message contents
+ */
+static bool msg_already_received(uint8_t * p_buffer);
+
+
+/** @brief Sets up and opens the background scanning channel and the master beacon channel used for the scan and forward demo.
+ */
+static void sf_ant_channels_setup(void)
+{
+    uint32_t err_code;
+
+    const ant_channel_config_t ms_channel_config =
+    {
+        .channel_number    = ANT_MS_CHANNEL_NUMBER,
+        .channel_type      = CHANNEL_TYPE_MASTER,
+        .ext_assign        = 0x00,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .device_number     = m_node_address,
+        .channel_period    = CHAN_PERIOD,
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    const ant_channel_config_t bs_channel_config =
+    {
+        .channel_number    = ANT_BS_CHANNEL_NUMBER,
+        .channel_type      = CHANNEL_TYPE_SLAVE,
+        .ext_assign        = EXT_PARAM_ALWAYS_SEARCH,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .device_number     = 0x00,              // Wild card
+        .channel_period    = 0x00,              // This is not taken into account.
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    const ant_search_config_t bs_search_config =
+    {
+        .channel_number        = ANT_BS_CHANNEL_NUMBER,
+        .low_priority_timeout  = ANT_LOW_PRIORITY_TIMEOUT_DISABLE,
+        .high_priority_timeout = ANT_HIGH_PRIORITY_SEARCH_DISABLE,
+        .search_sharing_cycles = ANT_SEARCH_SHARING_CYCLES_DISABLE,
+        .search_priority       = ANT_SEARCH_PRIORITY_DEFAULT,
+        .waveform              = ANT_WAVEFORM_FAST,
+    };
+
+    err_code = ant_channel_init(&ms_channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_channel_init(&bs_channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = ant_search_init(&bs_search_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Fill tx buffer for the first frame
+    sf_master_beacon_message_send();
+
+    // Open master beacon channel
+    err_code = sd_ant_channel_open(ANT_MS_CHANNEL_NUMBER);
+    APP_ERROR_CHECK(err_code);
+
+    // Open background scanning channel
+    err_code = sd_ant_channel_open(ANT_BS_CHANNEL_NUMBER);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+void sf_init(void)
+{
+    dr_init();
+
+    // Get the node address from the switches instead of serial number
+#if defined(NODE_ID_FROM_SWITCHES)
+    m_node_address = 1 + ((nrf_gpio_pin_read(BSP_SWITCH_1) << 0) |
+                     (nrf_gpio_pin_read(BSP_SWITCH_2) << 1) |
+                     (nrf_gpio_pin_read(BSP_SWITCH_3) << 2) |
+                     (nrf_gpio_pin_read(BSP_SWITCH_4) << 3));
+#else
+    // Get the node address from the serial number of the device
+    m_node_address = (uint8_t)(NRF_FICR->DEVICEID[0]);
+
+    if (m_node_address == ADDRESS_ALL_NODES) // Node address 0 is not allowed
+    {
+        m_node_address = 1;
+    }
+    else if (m_node_address == RESERVED) // Node address 0xFF is not allowed
+    {
+        m_node_address = 0xFE;
+    }
+#endif
+
+    UNUSED_PARAMETER(dr_device_add(m_node_address));
+
+    for (int i = 0; i < ANT_STANDARD_DATA_PAYLOAD_SIZE; i++)
+    {
+        m_cmd_tx_buffer[i] = RESERVED;
+    }
+
+    sf_ant_channels_setup();
+}
+
+
+void sf_bsp_evt_handler(bsp_event_t evt)
+{
+    device_t * p_device;
+
+    switch (evt)
+    {
+        case BSP_EVENT_KEY_0: // Turn self on
+            // Update status device registry
+            p_device                    = dr_device_get(m_node_address);
+            p_device->application_state = STATUS_LIGHT_ON;
+            p_device->last_message_sequence_received++;
+            bsp_board_leds_on();
+            break;
+
+        case BSP_EVENT_KEY_1: // Turn self off
+            // Update status device registry
+            p_device                    = dr_device_get(m_node_address);
+            p_device->application_state = STATUS_LIGHT_OFF;
+            p_device->last_message_sequence_received++;
+            bsp_board_leds_off();
+            break;
+
+        case BSP_EVENT_KEY_2: // Turn all on
+            // Update status device registry
+            p_device                    = dr_device_get(m_node_address);
+            p_device->application_state = STATUS_LIGHT_ON;
+            p_device->last_message_sequence_received++;
+            // Update command buffer
+            set_cmd_buffer_new(ADDRESS_ALL_NODES, COMMAND_LIGHT_ON, RESERVED, RESERVED);
+            bsp_board_leds_on();
+            break;
+
+        case BSP_EVENT_KEY_3: // Turn all off
+            // Update status device registry
+            p_device                    = dr_device_get(m_node_address);
+            p_device->application_state = STATUS_LIGHT_OFF;
+            p_device->last_message_sequence_received++;
+            // Update command buffer
+            set_cmd_buffer_new(ADDRESS_ALL_NODES, COMMAND_LIGHT_OFF, RESERVED, RESERVED);
+            bsp_board_leds_off();
+            break;
+
+        default:
+            return; // no implementation needed
+    }
+}
+
+
+/**@brief Processes ANT message on ANT background scanning channel
+ *
+ * @param[in] p_ant_evt   ANT message content.
+ * @param[in] p_context     Context.
+ */
+void sf_background_scanner_process(ant_evt_t * p_ant_evt, void * p_context)
+{
+    if (p_ant_evt->channel != ANT_BS_CHANNEL_NUMBER)
+    {
+        return;
+    }
+
+    device_t * p_device;
+    switch (p_ant_evt->event)
+    {
+        case EVENT_RX:
+
+            // Device Status Page
+            if (p_ant_evt->message.ANT_MESSAGE_aucPayload[DATA_PAGE_IND] == DEVICE_STATUS_PAGE)
+            {
+                uint8_t node            = p_ant_evt->message.ANT_MESSAGE_aucPayload[DEVICE_STATUS_NODE_IND]; // Origin
+                uint8_t sequence_number = p_ant_evt->message.ANT_MESSAGE_aucPayload[DEVICE_STATUS_SEQ_NUM_IND];
+                uint8_t device_state    = p_ant_evt->message.ANT_MESSAGE_aucPayload[DEVICE_STATUS_STATE_IND];
+
+                // Has this device been seen before?
+                if (dr_device_exists(node))
+                {
+                    // Is this a new message?
+                    if (!msg_already_received(p_ant_evt->message.ANT_MESSAGE_aucPayload))
+                    {
+                        // Update status device registry
+                        p_device = dr_device_get(node);
+                        p_device->last_message_sequence_received = sequence_number;
+                        p_device->application_state              = device_state;
+                        m_tx_page_counter                        = dr_index_of_node_get(node) - 1; // Small optimization to send the new device info first
+                    }
+                }
+                // First message received from this device.
+                else
+                {
+                    // Attempt to add the new device
+                    if (dr_device_add(node))
+                    {
+                        // Update status device registry
+                        p_device                                 = dr_device_get(node);
+                        p_device->application_state              = device_state;
+                        p_device->last_message_sequence_received = sequence_number;
+                    }
+                }
+            }
+            // Internal Network Command Page
+            else if (p_ant_evt->message.ANT_MESSAGE_aucPayload[DATA_PAGE_IND] == INTERNAL_COMMAND_PAGE)
+            {
+                // Is this a new message?
+                if (!msg_already_received(p_ant_evt->message.ANT_MESSAGE_aucPayload))
+                {
+                    uint8_t node                    = p_ant_evt->message.ANT_MESSAGE_aucPayload[INTERNAL_CMD_DST_IND]; // Destination
+                    uint8_t sequence_number         = p_ant_evt->message.ANT_MESSAGE_aucPayload[INTERNAL_CMD_SEQ_NUM_IND];
+                    uint8_t cmd_page_interleave_pct = p_ant_evt->message.ANT_MESSAGE_aucPayload[INTERNAL_CMD_CMD_DATA1_IND];
+                    uint8_t high_priority_cmd_enable= p_ant_evt->message.ANT_MESSAGE_aucPayload[INTERNAL_CMD_CMD_DATA2_IND];
+                    uint8_t node_command            = p_ant_evt->message.ANT_MESSAGE_aucPayload[INTERNAL_CMD_CMD_IND];
+
+                    // Update command buffer
+                    set_cmd_buffer_seq(node, node_command, cmd_page_interleave_pct, high_priority_cmd_enable, sequence_number);
+
+                    if (node == m_node_address || node == ADDRESS_ALL_NODES)
+                    {
+                        // Update status device registry
+                        p_device = dr_device_get(m_node_address);
+                        p_device->last_message_sequence_received++;
+
+                        switch (node_command)
+                        {
+                            case COMMAND_LIGHT_OFF:
+                                p_device->application_state = STATUS_LIGHT_OFF;
+                                bsp_board_leds_off();
+                                break;
+
+                            case COMMAND_LIGHT_ON:
+                                p_device->application_state = STATUS_LIGHT_ON;
+                                bsp_board_leds_on();
+                                break;
+                            case COMMAND_CHG_CMD_PG_SET:
+                                if (cmd_page_interleave_pct != RESERVED)
+                                    m_cmd_pg_intlv_pct = cmd_page_interleave_pct;
+                                if (high_priority_cmd_enable != RESERVED)
+                                    enable_optimized_command_page_priority = high_priority_cmd_enable;
+                                break;
+                        }
+                    }
+                }
+            }
+            break;
+
+        default:
+            break;
+
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_bs_observer, ANT_BS_ANT_OBSERVER_PRIO, sf_background_scanner_process, NULL);
+
+
+static void sf_master_beacon_message_send(void)
+{
+    uint32_t      err_code;
+    device_t    * p_device      = NULL;
+
+    // Number of messages being transmitted per second
+    uint8_t msg_tx_freq = ANT_CLOCK_FREQUENCY / CHAN_PERIOD;
+
+    // Number of command pages required to be transmitted per second
+    uint16_t req_cmd_page_count = msg_tx_freq * m_cmd_pg_intlv_pct / 100;
+
+    // If we are sending a new command, prioritize it. Or if we are unable to send command pages.
+    if (m_flag_hi_pri_cmd)
+    {
+    // Transmit new command for 1 second less 1 channel period
+        req_cmd_page_count = msg_tx_freq - 1;
+    }
+
+    // Transmit status pages after send all of the required command pages for the channel period
+    if (m_tx_page_counter % msg_tx_freq >= req_cmd_page_count)
+    {
+        // Unflag high priority command rotation once we have started sending status pages
+        m_flag_hi_pri_cmd = false;
+
+        // Cycle through available device numbers until we get to a registered device.
+        do
+        {
+            if (m_counter < (MAX_DEVICES - 1))
+            {
+                m_counter++;
+            }
+            else
+            {
+                m_counter = 0;
+            }
+        }
+        while (!dr_device_at_index_exists(m_counter));
+
+        p_device = dr_device_at_index_get(m_counter);
+
+        // Update the primary tx buffer
+        m_tx_buffer[DATA_PAGE_IND] = DEVICE_STATUS_PAGE;
+        m_tx_buffer[DEVICE_STATUS_NODE_IND] = p_device->node_id;
+        m_tx_buffer[2] = RESERVED;
+        m_tx_buffer[3] = RESERVED;
+        m_tx_buffer[4] = RESERVED;
+        m_tx_buffer[5] = RESERVED;
+        m_tx_buffer[DEVICE_STATUS_SEQ_NUM_IND] = p_device->last_message_sequence_received;
+        m_tx_buffer[DEVICE_STATUS_STATE_IND] = p_device->application_state;
+
+        // Add the message we are transmitting to the cache
+        mc_add(&m_rcvd_messages, m_tx_buffer);
+
+        err_code = sd_ant_broadcast_message_tx(ANT_MS_CHANNEL_NUMBER,
+                                               ANT_STANDARD_DATA_PAYLOAD_SIZE,
+                                               m_tx_buffer);
+        APP_ERROR_CHECK(err_code);
+    }
+    // Send command page when we are not sending status pages
+    else
+    {
+        // Add the message we are transmitting to the cache
+        mc_add(&m_rcvd_messages, m_cmd_tx_buffer);
+
+        err_code = sd_ant_broadcast_message_tx(ANT_MS_CHANNEL_NUMBER,
+                                               ANT_STANDARD_DATA_PAYLOAD_SIZE,
+                                               m_cmd_tx_buffer);
+        APP_ERROR_CHECK(err_code);
+    }
+
+    // Increment transmitted page counters
+    m_tx_page_counter++;
+    m_cache_tick_tx_counter++;
+
+    // Piggy back off of the channel period to provide 1 second ticks for cache cleanup
+    if (m_cache_tick_tx_counter % msg_tx_freq == 0)
+    {
+        mc_cleanup(&m_rcvd_messages, CACHE_TIMEOUT_S);
+    }
+}
+
+/**@brief Processes ANT message on ANT master beacon channel
+ *
+ * @details   This function handles all events on the master beacon channel.
+ *            On EVENT_TX an DEVICE_STATUS_PAGE message is queued. The format is:
+ *            byte[0]   = page (0x20 = DEVICE_STATUS_PAGE)
+ *            byte[1]   = Node Address (Source)
+ *            byte[2]   = Reserved
+ *            byte[3]   = Reserved
+ *            byte[4]   = Reserved
+ *            byte[5]   = Reserved
+ *            byte[6]   = Sequence Number
+ *            byte[7]   = Application State
+ *
+ *            This channel may also reseive commands sent from a mobile device such as a phone, controller, or ANTwareII in the format:
+ *            byte[0]   = page (0x10 = MOBILE_COMMAND_PAGE)
+ *            byte[1]   = Originating node (Set to 0xFF for mobile device)
+ *            byte[2]   = Destination node (0 for all nodes)
+ *            byte[3]   = Reserved (0x0F)
+ *            byte[4]   = Reserved (0xFF)
+ *            byte[5]   = Reserved (0xFF)
+ *            byte[6]   = Reserved (0xFF)
+ *            byte[7]   = Command (Turn Off: 0x00, Turn On: 0x01)
+ *
+ * @param[in] p_ant_evt ANT message content.
+ * @param[in] p_context  Context.
+ */
+void sf_master_beacon_process(ant_evt_t * p_ant_evt, void * p_context)
+{
+    if (p_ant_evt->channel != ANT_MS_CHANNEL_NUMBER)
+    {
+        return;
+    }
+
+    switch (p_ant_evt->event)
+    {
+        case EVENT_TX:
+            sf_master_beacon_message_send();
+            break;
+
+        case EVENT_RX:
+            sf_external_received_message_process(p_ant_evt->message.ANT_MESSAGE_aucPayload[DATA_PAGE_IND],
+                                                 p_ant_evt->message.ANT_MESSAGE_aucPayload[MOBILE_CMD_DST_IND],
+                                                 p_ant_evt->message.ANT_MESSAGE_aucPayload[MOBILE_CMD_CMD_IND],
+                                                 p_ant_evt->message.ANT_MESSAGE_aucPayload[MOBILE_CMD_CMD_DATA1_IND],
+                                                 p_ant_evt->message.ANT_MESSAGE_aucPayload[MOBILE_CMD_CMD_DATA2_IND]);
+            break;
+
+        default:
+            break;
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_ms_observer, ANT_MS_ANT_OBSERVER_PRIO, sf_master_beacon_process, NULL);
+
+
+static bool msg_already_received(uint8_t * p_buffer)
+{
+    if (mc_is_in_cache(&m_rcvd_messages, p_buffer))
+    {
+        return true;
+    }
+
+    // New message, store for future comparisons
+    mc_add(&m_rcvd_messages, p_buffer);
+
+    return false;
+}
+
+
+void set_cmd_buffer_seq(uint8_t dst, uint8_t cmd, uint8_t data1, uint8_t data2, uint8_t seq)
+{
+    m_cmd_tx_buffer[DATA_PAGE_IND] = INTERNAL_COMMAND_PAGE;
+    m_cmd_tx_buffer[INTERNAL_CMD_DST_IND] = dst;
+    m_cmd_tx_buffer[2] = RESERVED;
+    m_cmd_tx_buffer[3] = RESERVED;
+    m_cmd_tx_buffer[INTERNAL_CMD_CMD_DATA2_IND] = data2;
+    m_cmd_tx_buffer[INTERNAL_CMD_CMD_DATA1_IND] = data1;
+    m_cmd_tx_buffer[INTERNAL_CMD_SEQ_NUM_IND] = seq;
+    m_cmd_tx_buffer[INTERNAL_CMD_CMD_IND] = cmd;
+
+    if (enable_optimized_command_page_priority || cmd == COMMAND_CHG_CMD_PG_SET)
+    {
+        m_flag_hi_pri_cmd = true;   // Flag that command page should take priority over other pages
+
+        // Small optimization to send the new command first.
+        // The master channel is configured to send cmd pages first at the start of every second
+        m_tx_page_counter = 0;
+    }
+}
+
+
+void set_cmd_buffer_new(uint8_t dst, uint8_t cmd, uint8_t payload0, uint8_t payload1)
+{
+    set_cmd_buffer_seq(dst, cmd, payload0, payload1, m_cmd_tx_buffer[6] + 1);
+}
+
+
+void sf_external_received_message_process(uint8_t page, uint8_t dst, uint8_t data0, uint8_t data1, uint8_t data2)
+{
+    device_t    * p_device      = NULL;
+    uint8_t command = data0;
+
+    // Mobile Command Page
+    switch (page)
+    {
+        case MOBILE_COMMAND_PAGE:
+
+            if (dr_device_exists(dst))
+            {
+                p_device = dr_device_get(dst);
+            }
+
+            switch (command)
+            {
+                case COMMAND_LIGHT_ON:
+
+                    set_cmd_buffer_new(dst, COMMAND_LIGHT_ON,
+                                   RESERVED, RESERVED);
+
+                    if ((p_device != NULL && p_device->node_id == m_node_address)
+                                            || dst == ADDRESS_ALL_NODES)
+                    {
+                        p_device                    = dr_device_get(m_node_address);
+                        p_device->application_state = STATUS_LIGHT_ON;
+                        p_device->last_message_sequence_received++;
+                        bsp_board_leds_on();
+                    }
+                    break;
+
+                case COMMAND_LIGHT_OFF:
+
+                    set_cmd_buffer_new(dst, COMMAND_LIGHT_OFF,
+                                   RESERVED, RESERVED);
+
+                    if ((p_device != NULL && p_device->node_id == m_node_address)
+                                            || dst == ADDRESS_ALL_NODES)
+                    {
+                        p_device                    = dr_device_get(m_node_address);
+                        p_device->application_state = STATUS_LIGHT_OFF;
+                        p_device->last_message_sequence_received++;
+                        bsp_board_leds_off();
+                    }
+                    break;
+
+                case COMMAND_CHG_CMD_PG_SET :
+
+                    set_cmd_buffer_new(dst, COMMAND_CHG_CMD_PG_SET,
+                                   data1, data2);
+
+                    if (dst == m_node_address || dst == ADDRESS_ALL_NODES)
+                    {
+                        if (data1 != RESERVED)
+                            m_cmd_pg_intlv_pct = data1;
+                        if (data2 != RESERVED)
+                            enable_optimized_command_page_priority = data2;
+                    }
+                    break;
+            }
+            break;
+    }
+}
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/scan_and_forward.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/scan_and_forward.h
new file mode 100644
index 0000000..aac48bb
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_scan_and_forward/scan_and_forward.h
@@ -0,0 +1,118 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/**@file
+ * @brief Example of using a 'Scan and Forward' type ANT multi node solution.
+ *
+ * @defgroup ant_scan_and_forward_example ANT Scan and Forward Demo
+ * @{
+ * @ingroup nrf_ant_scan_and_forward
+ *
+ */
+
+#ifndef SCAN_AND_FORWARD_H__
+#define SCAN_AND_FORWARD_H__
+
+#include <stdint.h>
+#include "ant_interface.h"
+#include "bsp.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@brief Handles BSP events.
+ *
+ * @param[in] evt   BSP event.
+ */
+void sf_bsp_evt_handler(bsp_event_t evt);
+
+/**@brief Initializes nodes in the scan and forward demo
+ */
+void sf_init(void);
+
+/**@brief Formats a command for potential re-transmission
+*
+* @param[in]   dst                Command destination
+* @param[in]   cmd                Command
+* @param[in]   payload0           Command payload byte 0
+* @param[in]   payload1           Command payload byte 1
+* @param[in]   seq                Command sequence number
+*/
+void set_cmd_buffer_seq(uint8_t dst, uint8_t cmd, uint8_t data0, uint8_t data1, uint8_t seq);
+
+/**@brief Formats a new command for transmission
+*
+* @param[in]   dst                Command destination
+* @param[in]   cmd                Command
+* @param[in]   payload0           Command payload byte 0
+* @param[in]   payload1           Command payload byte 1
+*/
+void set_cmd_buffer_new(uint8_t dst, uint8_t cmd, uint8_t payload0, uint8_t payload1);
+
+/**@brief Dispatches external control commands to the network
+*
+* @param[in]   page             Page number
+* @param[in]   dst              Destination node
+* @param[in]   data0            Command data byte 0 - typically the command to be executed
+* @param[in]   data1            Command data byte 1
+* @param[in]   data2            Command data byte 2
+*/
+void sf_external_received_message_process(uint8_t page, uint8_t dst, uint8_t data0, uint8_t data1, uint8_t data2);
+
+/**
+ *@}
+ **/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // SCAN_AND_FORWARD_H__
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/ant_search_sharing.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/ant_search_sharing.c
new file mode 100644
index 0000000..f6548e5
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/ant_search_sharing.c
@@ -0,0 +1,171 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#include "ant_search_sharing.h"
+#include <stdint.h>
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "app_error.h"
+#include "boards.h"
+#include "sdk_config.h"
+#include "ant_channel_config.h"
+#include "ant_search_config.h"
+#include "nrf_soc.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+
+
+// Miscellaneous defines.
+#define ANT_CHANNEL_NUM_0           0       /**< ANT Channel Number for channel 0. */
+#define ANT_CHANNEL_NUM_1           1       /**< ANT Channel Number for channel 1. */
+
+#define APP_ANT_OBSERVER_PRIO       1       /**< Application's ANT observer priority. You shouldn't need to modify this value. */
+
+bool m_rx_first_ch0;                        /**< Received first message on channel 0. */
+bool m_rx_first_ch1;                        /**< Received first message on channel 1. */
+
+
+void ant_search_sharing_setup(void)
+{
+    uint32_t err_code;
+
+    ant_channel_config_t channel_config =
+    {
+        .channel_type   = CHANNEL_TYPE_SLAVE,
+        .ext_assign     = 0x00,
+        .device_number  = 0x00,     // Wild card
+        .network_number = ANT_NETWORK_NUM,
+    };
+
+    ant_search_config_t search_config =
+    {
+        .low_priority_timeout  = SEARCH_TIMEOUT,
+        .high_priority_timeout = ANT_HIGH_PRIORITY_SEARCH_DISABLE,
+        .search_sharing_cycles = SEARCH_CYCLES,
+        .search_priority       = ANT_SEARCH_PRIORITY_DEFAULT,
+        .waveform              = ANT_WAVEFORM_FAST,     // Use fast waveform to limit impact on acquisition time from searching on multiple frequencies
+    };
+
+    m_rx_first_ch0 = false;
+    m_rx_first_ch1 = false;
+
+    // Configure channel parameters for channel 0
+    channel_config.channel_number    = ANT_CHANNEL_NUM_0;
+    channel_config.device_type       = CH0_CHAN_ID_DEV_TYPE;
+    channel_config.transmission_type = CH0_CHAN_ID_TRANS_TYPE;
+    channel_config.channel_period    = CH0_CHAN_PERIOD;
+    channel_config.rf_freq           = CH0_RF_FREQ;
+    err_code                         = ant_channel_init(&channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Configure search parameters for channel 0
+    search_config.channel_number = ANT_CHANNEL_NUM_0;
+    err_code                     = ant_search_init(&search_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Configure channel parameters for channel 1
+    channel_config.channel_number    = ANT_CHANNEL_NUM_1;
+    channel_config.device_type       = CH1_CHAN_ID_DEV_TYPE;
+    channel_config.transmission_type = CH1_CHAN_ID_TRANS_TYPE;
+    channel_config.channel_period    = CH1_CHAN_PERIOD;
+    channel_config.rf_freq           = CH1_RF_FREQ;
+    err_code                         = ant_channel_init(&channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Configure search parameters for channel 1
+    search_config.channel_number = ANT_CHANNEL_NUM_1;
+    err_code                     = ant_search_init(&search_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Open both channels
+    err_code = sd_ant_channel_open(ANT_CHANNEL_NUM_0);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = sd_ant_channel_open(ANT_CHANNEL_NUM_1);
+    APP_ERROR_CHECK(err_code);
+
+}
+
+/**@brief Function for handling a ANT stack event.
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+void ant_evt_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    switch (p_ant_evt->event)
+    {
+        case EVENT_RX:
+            switch (p_ant_evt->channel)
+            {
+                case ANT_CHANNEL_NUM_0:
+                    if (!m_rx_first_ch0)
+                    {
+                        m_rx_first_ch0 = true;
+                        bsp_board_led_on(BSP_BOARD_LED_0);
+                    }
+                    break;
+
+                case ANT_CHANNEL_NUM_1:
+                    if (!m_rx_first_ch1)
+                    {
+                        m_rx_first_ch1 = true;
+                        bsp_board_led_on(BSP_BOARD_LED_1);
+                    }
+                    break;
+            }
+            break;
+
+        default:
+            break; // No implementation needed
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, APP_ANT_OBSERVER_PRIO, ant_evt_handler, NULL);
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/ant_search_sharing.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/ant_search_sharing.eww
new file mode 100644
index 0000000..8d843d7
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/ant_search_sharing.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_search_sharing_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_search_sharing_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/ant_search_sharing.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/ant_search_sharing.h
new file mode 100644
index 0000000..ca25101
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/ant_search_sharing.h
@@ -0,0 +1,70 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#ifndef ANT_SEARCH_SHARING_H__
+#define ANT_SEARCH_SHARING_H__
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@brief Function for configuring search sharing
+ *
+ */
+void ant_search_sharing_setup(void);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // ANT_SEARCH_SHARING_H__
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/arm4/ant_search_sharing_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/arm4/ant_search_sharing_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/arm4/ant_search_sharing_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/arm4/ant_search_sharing_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/arm4/ant_search_sharing_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..7910495
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/arm4/ant_search_sharing_d52_starterkit_s212.uvproj
@@ -0,0 +1,557 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_search_sharing.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_search_sharing.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/arm5_no_packs/ant_search_sharing_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/arm5_no_packs/ant_search_sharing_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/arm5_no_packs/ant_search_sharing_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/arm5_no_packs/ant_search_sharing_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/arm5_no_packs/ant_search_sharing_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..0439cad
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/arm5_no_packs/ant_search_sharing_d52_starterkit_s212.uvprojx
@@ -0,0 +1,581 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_search_sharing.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_search_sharing.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..9d1dcf6
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,189 @@
+PROJECT_NAME     := ant_search_sharing_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_search_sharing_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_search_sharing.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(PROJ_DIR) \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/armgcc/ant_search_sharing_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/armgcc/ant_search_sharing_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/armgcc/ant_search_sharing_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..07073ce
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3980 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <h> CHANNEL 0 
+
+//==========================================================
+// <o> CH0_CHAN_ID_DEV_TYPE - Channel 0 ID: Device Type. 
+#ifndef CH0_CHAN_ID_DEV_TYPE
+#define CH0_CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CH0_CHAN_ID_TRANS_TYPE - Channel 0 ID: Transmission type. 
+#ifndef CH0_CHAN_ID_TRANS_TYPE
+#define CH0_CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CH0_RF_FREQ - Channel 0 RF Frequency. 
+#ifndef CH0_RF_FREQ
+#define CH0_RF_FREQ 50
+#endif
+
+// <o> CH0_CHAN_PERIOD - Channel 0 Period (in 32 kHz counts). 
+#ifndef CH0_CHAN_PERIOD
+#define CH0_CHAN_PERIOD 8192
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> CHANNEL 1 
+
+//==========================================================
+// <o> CH1_CHAN_ID_DEV_TYPE - Channel 1 ID: Device Type. 
+#ifndef CH1_CHAN_ID_DEV_TYPE
+#define CH1_CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CH1_CHAN_ID_TRANS_TYPE - Channel 1 ID: Transmission type. 
+#ifndef CH1_CHAN_ID_TRANS_TYPE
+#define CH1_CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CH1_RF_FREQ - Channel 1 RF Frequency. 
+#ifndef CH1_RF_FREQ
+#define CH1_RF_FREQ 70
+#endif
+
+// <o> CH1_CHAN_PERIOD - Channel 1 Period (in 32 kHz counts). 
+#ifndef CH1_CHAN_PERIOD
+#define CH1_CHAN_PERIOD 8192
+#endif
+
+// </h> 
+//==========================================================
+
+// <o> SEARCH_CYCLES - Search sharing cycles. Set to one to search across multiple frequencies. 
+#ifndef SEARCH_CYCLES
+#define SEARCH_CYCLES 1
+#endif
+
+// <o> SEARCH_TIMEOUT - Search timeout. 
+#ifndef SEARCH_TIMEOUT
+#define SEARCH_TIMEOUT 12
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 2
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/iar/ant_search_sharing_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/iar/ant_search_sharing_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/iar/ant_search_sharing_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/iar/ant_search_sharing_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/iar/ant_search_sharing_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..17c8f40
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/iar/ant_search_sharing_d52_starterkit_s212.ewp
@@ -0,0 +1,1083 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_search_sharing_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_search_sharing_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_search_sharing_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_search_sharing.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/iar/ant_search_sharing_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/iar/ant_search_sharing_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/iar/ant_search_sharing_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/ses/ant_search_sharing_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/ses/ant_search_sharing_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..dfb1830
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/ses/ant_search_sharing_d52_starterkit_s212.emProject
@@ -0,0 +1,108 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_search_sharing_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_search_sharing_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/ant/ant_search_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../..;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_search_sharing.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/ses/ant_search_sharing_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/ses/ant_search_sharing_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..97c36db
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/ses/ant_search_sharing_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_search_sharing_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/main.c
new file mode 100644
index 0000000..f2de1b1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/main.c
@@ -0,0 +1,124 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/*
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdint.h>
+#include "nrf.h"
+#include "app_error.h"
+#include "boards.h"
+#include "hardfault.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+#include "ant_search_sharing.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+/**@brief Function for the Timer and BSP initialization.
+ */
+static void utils_setup(void)
+{
+    bsp_board_init(BSP_INIT_LEDS);
+
+    ret_code_t err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Function for ANT stack initialization.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    softdevice_setup();
+    utils_setup();
+    ant_search_sharing_setup();
+
+    NRF_LOG_INFO("ANT Search Sharing example started.");
+
+    // Enter main loop
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/arm4/ant_search_sharing_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/arm4/ant_search_sharing_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/arm4/ant_search_sharing_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/arm4/ant_search_sharing_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/arm4/ant_search_sharing_pca10040_s212.uvproj
new file mode 100644
index 0000000..691923d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/arm4/ant_search_sharing_pca10040_s212.uvproj
@@ -0,0 +1,554 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_search_sharing.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_search_sharing.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/arm5_no_packs/ant_search_sharing_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/arm5_no_packs/ant_search_sharing_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/arm5_no_packs/ant_search_sharing_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/arm5_no_packs/ant_search_sharing_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/arm5_no_packs/ant_search_sharing_pca10040_s212.uvprojx
new file mode 100644
index 0000000..c26d6a1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/arm5_no_packs/ant_search_sharing_pca10040_s212.uvprojx
@@ -0,0 +1,578 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_search_sharing.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_search_sharing.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..47d18d1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,192 @@
+PROJECT_NAME     := ant_search_sharing_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_search_sharing_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_search_sharing.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(PROJ_DIR) \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/armgcc/ant_search_sharing_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/armgcc/ant_search_sharing_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/armgcc/ant_search_sharing_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..881ed79
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3924 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <h> CHANNEL 0 
+
+//==========================================================
+// <o> CH0_CHAN_ID_DEV_TYPE - Channel 0 ID: Device Type. 
+#ifndef CH0_CHAN_ID_DEV_TYPE
+#define CH0_CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CH0_CHAN_ID_TRANS_TYPE - Channel 0 ID: Transmission type. 
+#ifndef CH0_CHAN_ID_TRANS_TYPE
+#define CH0_CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CH0_RF_FREQ - Channel 0 RF Frequency. 
+#ifndef CH0_RF_FREQ
+#define CH0_RF_FREQ 50
+#endif
+
+// <o> CH0_CHAN_PERIOD - Channel 0 Period (in 32 kHz counts). 
+#ifndef CH0_CHAN_PERIOD
+#define CH0_CHAN_PERIOD 8192
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> CHANNEL 1 
+
+//==========================================================
+// <o> CH1_CHAN_ID_DEV_TYPE - Channel 1 ID: Device Type. 
+#ifndef CH1_CHAN_ID_DEV_TYPE
+#define CH1_CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CH1_CHAN_ID_TRANS_TYPE - Channel 1 ID: Transmission type. 
+#ifndef CH1_CHAN_ID_TRANS_TYPE
+#define CH1_CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> CH1_RF_FREQ - Channel 1 RF Frequency. 
+#ifndef CH1_RF_FREQ
+#define CH1_RF_FREQ 70
+#endif
+
+// <o> CH1_CHAN_PERIOD - Channel 1 Period (in 32 kHz counts). 
+#ifndef CH1_CHAN_PERIOD
+#define CH1_CHAN_PERIOD 8192
+#endif
+
+// </h> 
+//==========================================================
+
+// <o> SEARCH_CYCLES - Search sharing cycles. Set to one to search across multiple frequencies. 
+#ifndef SEARCH_CYCLES
+#define SEARCH_CYCLES 1
+#endif
+
+// <o> SEARCH_TIMEOUT - Search timeout. 
+#ifndef SEARCH_TIMEOUT
+#define SEARCH_TIMEOUT 12
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 2
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/iar/ant_search_sharing_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/iar/ant_search_sharing_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/iar/ant_search_sharing_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/iar/ant_search_sharing_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/iar/ant_search_sharing_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/iar/ant_search_sharing_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/iar/ant_search_sharing_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/iar/ant_search_sharing_pca10040_s212.ewp
new file mode 100644
index 0000000..7810820
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/iar/ant_search_sharing_pca10040_s212.ewp
@@ -0,0 +1,1086 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_search_sharing_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_search_sharing_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_search_sharing_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_search_sharing.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/ses/ant_search_sharing_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/ses/ant_search_sharing_pca10040_s212.emProject
new file mode 100644
index 0000000..8c8e64c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/ses/ant_search_sharing_pca10040_s212.emProject
@@ -0,0 +1,107 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_search_sharing_pca10040_s212" target="8" version="2">
+  <project Name="ant_search_sharing_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/ant/ant_search_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../..;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_search_sharing.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/ses/ant_search_sharing_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/ses/ant_search_sharing_pca10040_s212.emSession
new file mode 100644
index 0000000..6e57ef7
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/ses/ant_search_sharing_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_search_sharing_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/search_sharing_test.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/search_sharing_test.xml
new file mode 100644
index 0000000..91bb0eb
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_sharing/search_sharing_test.xml
@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:2016-03-02 16:23:59-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup />
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">1</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">50</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">2</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">3</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">70</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">35</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">36</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">37</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">38</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">39</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">40</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/ant_search_uplink.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/ant_search_uplink.c
new file mode 100644
index 0000000..d39f26e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/ant_search_uplink.c
@@ -0,0 +1,223 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#include "ant_search_uplink.h"
+#include <stdint.h>
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "app_error.h"
+#include "app_util.h"
+#include "boards.h"
+#include "sdk_config.h"
+#include "ant_channel_config.h"
+#include "ant_search_config.h"
+#include "nrf_soc.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+
+#define WILDCARD_DEVICE_NUMBER          0x00                    /**< Wildcard device number. */
+#define APP_ANT_OBSERVER_PRIO           1                       /**< Application's ANT observer priority. You shouldn't need to modify this value. */
+
+// Operation modes
+static enum
+{
+    MODE_NONE,                                                  /**< Do not send any uplink messages. */
+    MODE_SEND_UPLINK_ANY,                                       /**< Send uplink messages to any devices. */
+    MODE_SEND_UPLINK_SPECIFIC,                                  /**< Send a single uplink message to a specific device. */
+} m_mode;
+
+static uint8_t m_tx_buffer[ANT_STANDARD_DATA_PAYLOAD_SIZE];     /**< Transmit buffer. */
+static uint8_t m_counter;                                       /**< Counter to include in transmit data. */
+static bool    m_sent;
+
+
+/**@brief Send uplink message
+ * @param[in] device_number Device number of intended destination of message. Set to WILDCARD_DEVICE_NUMBER for any node.
+ */
+static void uplink_message_send(uint16_t device_number)
+{
+    uint8_t err_code;
+
+    m_tx_buffer[0] = 0xFF;
+    m_tx_buffer[1] = 0xFF;
+    m_tx_buffer[2] = 0xFF;
+    m_tx_buffer[3] = 0xFF;
+    m_tx_buffer[4] = 0xFF;
+    m_tx_buffer[5] = 0xFF;
+    m_tx_buffer[6] = 0xFF;
+    m_tx_buffer[7] = m_counter;
+
+    if (device_number != WILDCARD_DEVICE_NUMBER)
+    {
+        // Set the channel ID of the specific device to send message to
+        err_code = sd_ant_channel_id_set(ANT_CHANNEL_NUM,
+                                         device_number,
+                                         CHAN_ID_DEV_TYPE,
+                                         CHAN_ID_TRANS_TYPE);
+        APP_ERROR_CHECK(err_code);
+    }
+
+    err_code = sd_ant_broadcast_message_tx(ANT_CHANNEL_NUM,
+                                           ANT_STANDARD_DATA_PAYLOAD_SIZE,
+                                           m_tx_buffer);
+    APP_ERROR_CHECK(err_code);
+
+    m_counter++;
+}
+
+
+void ant_search_uplink_setup(void)
+{
+    uint32_t err_code;
+
+    m_mode    = MODE_NONE;
+    m_counter = 0;
+
+    ant_channel_config_t channel_config =
+    {
+        .channel_number    = ANT_CHANNEL_NUM,
+        .channel_type      = CHANNEL_TYPE_SLAVE,
+        .ext_assign        = EXT_PARAM_ALWAYS_SEARCH,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .device_number     = WILDCARD_DEVICE_NUMBER,
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    ant_search_config_t search_config = DEFAULT_ANT_SEARCH_CONFIG(ANT_CHANNEL_NUM);
+
+    // Keep searching always
+    search_config.low_priority_timeout = ANT_LOW_PRIORITY_TIMEOUT_DISABLE;
+
+    // Disable high priority search to minimize disruption to other channels while searching
+    search_config.high_priority_timeout = ANT_HIGH_PRIORITY_SEARCH_DISABLE;
+
+    // Configure the channel
+    err_code = ant_channel_init(&channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Configure search parameters
+    err_code = ant_search_init(&search_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Enable extended rx messages, including the channel ID
+    err_code = sd_ant_lib_config_set(ANT_LIB_CONFIG_MESG_OUT_INC_DEVICE_ID);
+    APP_ERROR_CHECK(err_code);
+
+    // Open background scanning channel
+    err_code = sd_ant_channel_open(ANT_CHANNEL_NUM);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+void ant_search_uplink_bsp_evt_handler(bsp_event_t evt)
+{
+    switch (evt)
+    {
+        case BSP_EVENT_KEY_0:
+            m_mode = MODE_SEND_UPLINK_ANY;
+            uplink_message_send(WILDCARD_DEVICE_NUMBER);
+            bsp_board_led_off(BSP_BOARD_LED_1);
+            break;
+
+        case BSP_EVENT_KEY_1:
+            m_mode = MODE_SEND_UPLINK_SPECIFIC;
+            m_sent = false;
+            bsp_board_led_off(BSP_BOARD_LED_1);
+            break;
+
+        default:
+            break; // No implementation needed
+    }
+}
+
+
+void ant_search_uplink_event_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    switch (p_ant_evt->event)
+    {
+        case EVENT_TX:
+            bsp_board_led_invert(BSP_BOARD_LED_1);
+            if (m_mode == MODE_SEND_UPLINK_ANY)
+            {
+                uplink_message_send(WILDCARD_DEVICE_NUMBER);
+            }
+            else if (m_mode == MODE_SEND_UPLINK_SPECIFIC)
+            {
+                // Reset the channel ID to wild card to continue receiving messages from any device
+                uint32_t err_code = sd_ant_channel_id_set(ANT_CHANNEL_NUM,
+                                                          WILDCARD_DEVICE_NUMBER,
+                                                          CHAN_ID_DEV_TYPE,
+                                                          CHAN_ID_TRANS_TYPE);
+                APP_ERROR_CHECK(err_code);
+            }
+            break;
+
+        case EVENT_RX:
+            bsp_board_led_invert(BSP_BOARD_LED_0);
+            if (m_mode == MODE_SEND_UPLINK_SPECIFIC && !m_sent)
+            {
+                // Decode extended data to get channel ID of the received message and send message to that specific device
+                if (p_ant_evt->message.ANT_MESSAGE_stExtMesgBF.bANTDeviceID)
+                {
+                    uint16_t device_number = uint16_decode(p_ant_evt->message.ANT_MESSAGE_aucExtData);
+                    uplink_message_send(device_number);
+                    m_sent = true;
+                }
+            }
+            break;
+
+        default:
+            break; // No implementation needed
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, APP_ANT_OBSERVER_PRIO, ant_search_uplink_event_handler, NULL);
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/ant_search_uplink.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/ant_search_uplink.eww
new file mode 100644
index 0000000..6403d17
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/ant_search_uplink.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_search_uplink_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_search_uplink_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/ant_search_uplink.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/ant_search_uplink.h
new file mode 100644
index 0000000..cff5754
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/ant_search_uplink.h
@@ -0,0 +1,78 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#ifndef ANT_SEARCH_UPLINK_H__
+#define ANT_SEARCH_UPLINK_H__
+
+#include <stdint.h>
+#include "bsp.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@brief Function for configuring search uplink
+ *
+ */
+void ant_search_uplink_setup(void);
+
+
+/**@brief Handles BSP events.
+ *
+ * @param[in] evt   BSP event.
+ */
+void ant_search_uplink_bsp_evt_handler(bsp_event_t evt);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // ANT_SEARCH_UPLINK_H__
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/ant_search_uplink_test.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/ant_search_uplink_test.xml
new file mode 100644
index 0000000..60056cd
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/ant_search_uplink_test.xml
@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:2/9/2016 9:04:57 AM-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup />
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">1</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">2</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">2</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">35</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">36</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">37</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">38</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">39</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">40</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/arm4/ant_search_uplink_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/arm4/ant_search_uplink_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/arm4/ant_search_uplink_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/arm4/ant_search_uplink_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/arm4/ant_search_uplink_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..cfe9150
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/arm4/ant_search_uplink_d52_starterkit_s212.uvproj
@@ -0,0 +1,557 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_search_uplink.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_search_uplink.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/arm5_no_packs/ant_search_uplink_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/arm5_no_packs/ant_search_uplink_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/arm5_no_packs/ant_search_uplink_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/arm5_no_packs/ant_search_uplink_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/arm5_no_packs/ant_search_uplink_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..d8cb8c6
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/arm5_no_packs/ant_search_uplink_d52_starterkit_s212.uvprojx
@@ -0,0 +1,581 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_search_uplink.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_search_uplink.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..7764edd
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,189 @@
+PROJECT_NAME     := ant_search_uplink_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_search_uplink_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_search_uplink.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(PROJ_DIR) \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/armgcc/ant_search_uplink_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/armgcc/ant_search_uplink_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/armgcc/ant_search_uplink_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..3644357
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3938 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/iar/ant_search_uplink_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/iar/ant_search_uplink_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/iar/ant_search_uplink_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/iar/ant_search_uplink_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/iar/ant_search_uplink_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..213c91a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/iar/ant_search_uplink_d52_starterkit_s212.ewp
@@ -0,0 +1,1083 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_search_uplink_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_search_uplink_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_search_uplink_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_search_uplink.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/iar/ant_search_uplink_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/iar/ant_search_uplink_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/iar/ant_search_uplink_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/ses/ant_search_uplink_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/ses/ant_search_uplink_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..be75de0
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/ses/ant_search_uplink_d52_starterkit_s212.emProject
@@ -0,0 +1,108 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_search_uplink_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_search_uplink_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/ant/ant_search_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../..;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_search_uplink.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/ses/ant_search_uplink_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/ses/ant_search_uplink_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..595ef61
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/ses/ant_search_uplink_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_search_uplink_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/main.c
new file mode 100644
index 0000000..d9deed4
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/main.c
@@ -0,0 +1,136 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/*
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <stdint.h>
+#include "nrf.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "bsp.h"
+#include "boards.h"
+#include "hardfault.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+#include "ant_search_uplink.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+/**@brief Function for the Timer and BSP initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS,
+                        ant_search_uplink_bsp_evt_handler);
+    APP_ERROR_CHECK(err_code);
+
+    err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**@brief Function for ANT stack initialization.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    ant_search_uplink_setup();
+
+    NRF_LOG_INFO("ANT Search Uplink example started.");
+
+    // Enter main loop
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/arm4/ant_search_uplink_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/arm4/ant_search_uplink_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/arm4/ant_search_uplink_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/arm4/ant_search_uplink_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/arm4/ant_search_uplink_pca10040_s212.uvproj
new file mode 100644
index 0000000..e9eae72
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/arm4/ant_search_uplink_pca10040_s212.uvproj
@@ -0,0 +1,554 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_search_uplink.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_search_uplink.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/arm5_no_packs/ant_search_uplink_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/arm5_no_packs/ant_search_uplink_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/arm5_no_packs/ant_search_uplink_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/arm5_no_packs/ant_search_uplink_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/arm5_no_packs/ant_search_uplink_pca10040_s212.uvprojx
new file mode 100644
index 0000000..34ae3fb
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/arm5_no_packs/ant_search_uplink_pca10040_s212.uvprojx
@@ -0,0 +1,578 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\components;..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\components\boards;..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..;..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_search_uplink.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_search_uplink.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..3bc75c5
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,192 @@
+PROJECT_NAME     := ant_search_uplink_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_search_uplink_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_search_uplink.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(PROJ_DIR) \
+  $(SDK_ROOT)/components/libraries/timer \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/libraries/bsp \
+  ../config \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/external/fprintf \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/armgcc/ant_search_uplink_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/armgcc/ant_search_uplink_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/armgcc/ant_search_uplink_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..a08ab38
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3882 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 2
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 1
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/iar/ant_search_uplink_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/iar/ant_search_uplink_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/iar/ant_search_uplink_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/iar/ant_search_uplink_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/iar/ant_search_uplink_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/iar/ant_search_uplink_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/iar/ant_search_uplink_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/iar/ant_search_uplink_pca10040_s212.ewp
new file mode 100644
index 0000000..00868fc
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/iar/ant_search_uplink_pca10040_s212.ewp
@@ -0,0 +1,1086 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_search_uplink_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_search_uplink_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_search_uplink_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_search_uplink.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/ses/ant_search_uplink_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/ses/ant_search_uplink_pca10040_s212.emProject
new file mode 100644
index 0000000..7b8b7ee
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/ses/ant_search_uplink_pca10040_s212.emProject
@@ -0,0 +1,107 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_search_uplink_pca10040_s212" target="8" version="2">
+  <project Name="ant_search_uplink_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../components;../../../../../../components/ant/ant_channel_config;../../../../../../components/ant/ant_search_config;../../../../../../components/boards;../../../../../../components/libraries/atomic;../../../../../../components/libraries/balloc;../../../../../../components/libraries/bsp;../../../../../../components/libraries/button;../../../../../../components/libraries/delay;../../../../../../components/libraries/experimental_log;../../../../../../components/libraries/experimental_log/src;../../../../../../components/libraries/experimental_memobj;../../../../../../components/libraries/experimental_section_vars;../../../../../../components/libraries/hardfault;../../../../../../components/libraries/hardfault/nrf52;../../../../../../components/libraries/mutex;../../../../../../components/libraries/pwr_mgmt;../../../../../../components/libraries/scheduler;../../../../../../components/libraries/strerror;../../../../../../components/libraries/timer;../../../../../../components/libraries/util;../../../../../../components/softdevice/common;../../../../../../components/softdevice/s212/headers;../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../components/toolchain/cmsis/include;../../..;../../../../../../external/fprintf;../../../../../../external/segger_rtt;../../../../../../integration/nrfx;../../../../../../integration/nrfx/legacy;../../../../../../modules/nrfx;../../../../../../modules/nrfx/drivers/include;../../../../../../modules/nrfx/hal;../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_search_uplink.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/ses/ant_search_uplink_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/ses/ant_search_uplink_pca10040_s212.emSession
new file mode 100644
index 0000000..6567021
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/ses/ant_search_uplink_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_search_uplink_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_search_uplink/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/ant_time_synchronization_rx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/ant_time_synchronization_rx.eww
new file mode 100644
index 0000000..7cfebe1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/ant_time_synchronization_rx.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_time_synchronization_rx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_time_synchronization_rx_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/arm4/ant_time_synchronization_rx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/arm4/ant_time_synchronization_rx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/arm4/ant_time_synchronization_rx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/arm4/ant_time_synchronization_rx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/arm4/ant_time_synchronization_rx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..5dba071
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/arm4/ant_time_synchronization_rx_d52_starterkit_s212.uvproj
@@ -0,0 +1,539 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_rtc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_rtc.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/arm5_no_packs/ant_time_synchronization_rx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/arm5_no_packs/ant_time_synchronization_rx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/arm5_no_packs/ant_time_synchronization_rx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/arm5_no_packs/ant_time_synchronization_rx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/arm5_no_packs/ant_time_synchronization_rx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..fde778b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/arm5_no_packs/ant_time_synchronization_rx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,563 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_rtc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_rtc.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..ed7eec6
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,177 @@
+PROJECT_NAME     := ant_time_synchronization_rx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_time_synchronization_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_rtc.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/armgcc/ant_time_synchronization_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/armgcc/ant_time_synchronization_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/armgcc/ant_time_synchronization_rx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..7c3ad49
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3898 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 3
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 3
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> LED_INVERT_PERIOD - Time between LED changes (in 32 kHz counts). 
+#ifndef LED_INVERT_PERIOD
+#define LED_INVERT_PERIOD 21845
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver
+//==========================================================
+#ifndef NRFX_RTC_ENABLED
+#define NRFX_RTC_ENABLED 1
+#endif
+// <q> NRFX_RTC0_ENABLED  - Enable RTC0 instance
+ 
+
+#ifndef NRFX_RTC0_ENABLED
+#define NRFX_RTC0_ENABLED 0
+#endif
+
+// <q> NRFX_RTC1_ENABLED  - Enable RTC1 instance
+ 
+
+#ifndef NRFX_RTC1_ENABLED
+#define NRFX_RTC1_ENABLED 0
+#endif
+
+// <q> NRFX_RTC2_ENABLED  - Enable RTC2 instance
+ 
+
+#ifndef NRFX_RTC2_ENABLED
+#define NRFX_RTC2_ENABLED 0
+#endif
+
+// <o> NRFX_RTC_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt 
+#ifndef NRFX_RTC_MAXIMUM_LATENCY_US
+#define NRFX_RTC_MAXIMUM_LATENCY_US 2000
+#endif
+
+// <o> NRFX_RTC_DEFAULT_CONFIG_FREQUENCY - Frequency  <16-32768> 
+
+
+#ifndef NRFX_RTC_DEFAULT_CONFIG_FREQUENCY
+#define NRFX_RTC_DEFAULT_CONFIG_FREQUENCY 32768
+#endif
+
+// <q> NRFX_RTC_DEFAULT_CONFIG_RELIABLE  - Ensures safe compare event triggering
+ 
+
+#ifndef NRFX_RTC_DEFAULT_CONFIG_RELIABLE
+#define NRFX_RTC_DEFAULT_CONFIG_RELIABLE 0
+#endif
+
+// <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_RTC_CONFIG_LOG_ENABLED
+#define NRFX_RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_RTC_CONFIG_LOG_LEVEL
+#define NRFX_RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_RTC_CONFIG_INFO_COLOR
+#define NRFX_RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_RTC_CONFIG_DEBUG_COLOR
+#define NRFX_RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> RTC_ENABLED - nrf_drv_rtc - RTC peripheral driver - legacy layer
+//==========================================================
+#ifndef RTC_ENABLED
+#define RTC_ENABLED 1
+#endif
+// <o> RTC_DEFAULT_CONFIG_FREQUENCY - Frequency  <16-32768> 
+
+
+#ifndef RTC_DEFAULT_CONFIG_FREQUENCY
+#define RTC_DEFAULT_CONFIG_FREQUENCY 32768
+#endif
+
+// <q> RTC_DEFAULT_CONFIG_RELIABLE  - Ensures safe compare event triggering
+ 
+
+#ifndef RTC_DEFAULT_CONFIG_RELIABLE
+#define RTC_DEFAULT_CONFIG_RELIABLE 0
+#endif
+
+// <o> RTC_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef RTC_DEFAULT_CONFIG_IRQ_PRIORITY
+#define RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> RTC0_ENABLED  - Enable RTC0 instance
+ 
+
+#ifndef RTC0_ENABLED
+#define RTC0_ENABLED 0
+#endif
+
+// <q> RTC1_ENABLED  - Enable RTC1 instance
+ 
+
+#ifndef RTC1_ENABLED
+#define RTC1_ENABLED 1
+#endif
+
+// <q> RTC2_ENABLED  - Enable RTC2 instance
+ 
+
+#ifndef RTC2_ENABLED
+#define RTC2_ENABLED 0
+#endif
+
+// <o> NRF_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt 
+#ifndef NRF_MAXIMUM_LATENCY_US
+#define NRF_MAXIMUM_LATENCY_US 2000
+#endif
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/iar/ant_time_synchronization_rx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/iar/ant_time_synchronization_rx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/iar/ant_time_synchronization_rx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/iar/ant_time_synchronization_rx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/iar/ant_time_synchronization_rx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..3479e1d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/iar/ant_time_synchronization_rx_d52_starterkit_s212.ewp
@@ -0,0 +1,1065 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_time_synchronization_rx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_time_synchronization_rx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_time_synchronization_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_rtc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/iar/ant_time_synchronization_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/iar/ant_time_synchronization_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/iar/ant_time_synchronization_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/ses/ant_time_synchronization_rx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/ses/ant_time_synchronization_rx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..5df7c20
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/ses/ant_time_synchronization_rx_d52_starterkit_s212.emProject
@@ -0,0 +1,101 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_time_synchronization_rx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_time_synchronization_rx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/ant/ant_search_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_rtc.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/ses/ant_time_synchronization_rx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/ses/ant_time_synchronization_rx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..870bdf6
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/ses/ant_time_synchronization_rx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_time_synchronization_rx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/main.c
new file mode 100644
index 0000000..bc60879
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/main.c
@@ -0,0 +1,306 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2016
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/*
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include "boards.h"
+#include "app_error.h"
+#include "nrf_drv_rtc.h"
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "ant_channel_config.h"
+#include "ant_search_config.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+// Arbitrary Page Numbers
+#define TIME_SYNC_PAGE                  0x01
+#define INVALID_PAGE                    0xFF
+
+// Miscellaneous defines.
+#define ANT_RTC_CHANNEL                 0
+#define APP_ANT_OBSERVER_PRIO           1            /**< Application's ANT observer priority. You shouldn't need to modify this value. */
+
+
+const nrf_drv_rtc_t m_rtc = NRF_DRV_RTC_INSTANCE(1); /**< Declaring an instance of nrf_drv_rtc for RTC1. */
+
+static uint8_t m_led_invert_next = 0; /**< Index of the next LED to be inverted. */
+
+
+/**@brief Function for handling a ANT stack event.
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+void ant_evt_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    nrf_pwr_mgmt_feed();
+
+    if ((p_ant_evt->message.ANT_MESSAGE_ucMesgID == MESG_BROADCAST_DATA_ID)  // Check if this is a broadcast message
+        && (p_ant_evt->message.ANT_MESSAGE_aucPayload[0] == TIME_SYNC_PAGE)) // Check if this is the time synchronization page
+    {
+        uint32_t time_stamp;
+        uint32_t offset;
+        uint32_t comp_chann_val;
+        uint32_t led_status;
+
+        // Get 4-byte RTC1 time stamp from extended data
+        time_stamp = (p_ant_evt->message.ANT_MESSAGE_aucExtData[3] << 24) +
+                     (p_ant_evt->message.ANT_MESSAGE_aucExtData[2] << 16) +
+                     (p_ant_evt->message.ANT_MESSAGE_aucExtData[1] << 8) +
+                     p_ant_evt->message.ANT_MESSAGE_aucExtData[0];
+
+        // Get time sync offset from time sync packet
+        offset = (p_ant_evt->message.ANT_MESSAGE_aucPayload[7] << 8) +
+                 p_ant_evt->message.ANT_MESSAGE_aucPayload[6];
+
+        // Calculate the next event time
+        comp_chann_val = time_stamp - offset + LED_INVERT_PERIOD;
+
+        // Setup RTC to fire during the next period
+        ret_code_t err_code = nrf_drv_rtc_cc_set(&m_rtc, ANT_RTC_CHANNEL, comp_chann_val, true);
+        APP_ERROR_CHECK(err_code);
+
+        // Get LED status from the payload
+        led_status = p_ant_evt->message.ANT_MESSAGE_aucPayload[5];
+
+        // Get the next LED to invert at the next RTC interrupt
+        m_led_invert_next = p_ant_evt->message.ANT_MESSAGE_aucPayload[4];
+
+        // Set the LEDs based on the status from the transmitter
+        for (int i = 0; i < LEDS_NUMBER; i++)
+        {
+            if ((1 << i) & led_status)
+            {
+                bsp_board_led_on(i);
+            }
+            else
+            {
+                bsp_board_led_off(i);
+            }
+        }
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, APP_ANT_OBSERVER_PRIO, ant_evt_handler, NULL);
+
+
+/**@brief Function for ANT stack initialization.
+ *
+ * @details Initializes the SoftDevice and the ANT event interrupt.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**@brief Function for handling the LED's when RTC interrupt occurs.
+ *
+ */
+static void led_event(void)
+{
+    uint32_t led_to_invert = ((m_led_invert_next++) % LEDS_NUMBER);
+
+    bsp_board_led_invert(led_to_invert);
+}
+
+
+/** @brief: Function for handling the RTC1 interrupts.
+ * Triggered on TICK and COMPARE0 match.
+ */
+static void rtc_handler(nrf_drv_rtc_int_type_t int_type)
+{
+    if (int_type == NRF_DRV_RTC_INT_COMPARE0)
+    {
+        led_event();
+
+        // Get the current RTC counter value
+        uint32_t count = nrf_drv_rtc_counter_get(&m_rtc);
+
+        // Set the RTC channel to interrupt again after the LED_INVERT_PERIOD
+        ret_code_t err_code = nrf_drv_rtc_cc_set(&m_rtc,
+                                                 ANT_RTC_CHANNEL,
+                                                 count + LED_INVERT_PERIOD,
+                                                 true);
+        APP_ERROR_CHECK(err_code);
+    }
+}
+
+
+/**@brief Function for setting up the ANT module to be ready for TX broadcast.
+ */
+static void ant_channel_rx_broadcast_setup(void)
+{
+    uint32_t              err_code;
+    ANT_TIME_STAMP_CONFIG stampConfig;
+
+    // Configure ANT Channel
+    ant_channel_config_t broadcast_channel_config =
+    {
+        .channel_number    = ANT_CHANNEL_NUM,
+        .channel_type      = CHANNEL_TYPE_SLAVE,
+        .ext_assign        = 0x00,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .device_number     = CHAN_ID_DEV_NUM,
+        .channel_period    = CHAN_PERIOD,
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    // Configure received message timestamp to use RTC1 (4 byte counter)
+    stampConfig.ucTimeBase        = ANT_TIME_BASE_ALT1;
+    stampConfig.bTimeStampEnabled = true;
+    err_code                      = sd_ant_time_stamp_config_set(&stampConfig);
+    APP_ERROR_CHECK(err_code);
+
+    // Initialize channel configuration
+    err_code = ant_channel_init(&broadcast_channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Disable high priority search timeout and set the proper channel number
+    ant_search_config_t ant_search_config   = DEFAULT_ANT_SEARCH_CONFIG(ANT_CHANNEL_NUM);
+    ant_search_config.high_priority_timeout = ANT_HIGH_PRIORITY_TIMEOUT_DISABLE;
+
+    // Set search timeout
+    err_code = ant_search_init(&ant_search_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Open channel.
+    err_code = sd_ant_channel_open(ANT_CHANNEL_NUM);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/** @brief Function initialization and configuration of RTC driver instance.
+ */
+static void rtc_config(void)
+{
+    uint32_t err_code;
+
+    // Initialize RTC instance
+    nrf_drv_rtc_config_t config = NRF_DRV_RTC_DEFAULT_CONFIG;
+
+    err_code = nrf_drv_rtc_init(&m_rtc, &config, rtc_handler);
+    APP_ERROR_CHECK(err_code);
+
+    // Enable tick event & interrupt
+    nrf_drv_rtc_tick_enable(&m_rtc, true);
+
+    // Set compare channel to trigger interrupt after LED_INVERT_PERIOD
+    err_code = nrf_drv_rtc_cc_set(&m_rtc, ANT_RTC_CHANNEL, LED_INVERT_PERIOD, true);
+    APP_ERROR_CHECK(err_code);
+
+    // Power on RTC instance
+    nrf_drv_rtc_enable(&m_rtc);
+}
+
+
+/**@brief Function for the Power Manager initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    rtc_config();
+    bsp_board_init(BSP_INIT_LEDS);
+    ant_channel_rx_broadcast_setup();
+
+    NRF_LOG_INFO("ANT Time Synchronization RX example started.");
+
+    // Main loop.
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/arm4/ant_time_synchronization_rx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/arm4/ant_time_synchronization_rx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/arm4/ant_time_synchronization_rx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/arm4/ant_time_synchronization_rx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/arm4/ant_time_synchronization_rx_pca10040_s212.uvproj
new file mode 100644
index 0000000..365a6ef
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/arm4/ant_time_synchronization_rx_pca10040_s212.uvproj
@@ -0,0 +1,536 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_rtc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_rtc.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/arm5_no_packs/ant_time_synchronization_rx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/arm5_no_packs/ant_time_synchronization_rx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/arm5_no_packs/ant_time_synchronization_rx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/arm5_no_packs/ant_time_synchronization_rx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/arm5_no_packs/ant_time_synchronization_rx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..a3fbb5d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/arm5_no_packs/ant_time_synchronization_rx_pca10040_s212.uvprojx
@@ -0,0 +1,560 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_rtc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_rtc.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..dd142f1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,180 @@
+PROJECT_NAME     := ant_time_synchronization_rx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_time_synchronization_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_rtc.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/armgcc/ant_time_synchronization_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/armgcc/ant_time_synchronization_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/armgcc/ant_time_synchronization_rx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..596bbf8
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3842 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_CHANNEL_NUM - Used ANT channel number. 
+#ifndef ANT_CHANNEL_NUM
+#define ANT_CHANNEL_NUM 0
+#endif
+
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 3
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 3
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> LED_INVERT_PERIOD - Time between LED changes (in 32 kHz counts). 
+#ifndef LED_INVERT_PERIOD
+#define LED_INVERT_PERIOD 21845
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver
+//==========================================================
+#ifndef NRFX_RTC_ENABLED
+#define NRFX_RTC_ENABLED 1
+#endif
+// <q> NRFX_RTC0_ENABLED  - Enable RTC0 instance
+ 
+
+#ifndef NRFX_RTC0_ENABLED
+#define NRFX_RTC0_ENABLED 0
+#endif
+
+// <q> NRFX_RTC1_ENABLED  - Enable RTC1 instance
+ 
+
+#ifndef NRFX_RTC1_ENABLED
+#define NRFX_RTC1_ENABLED 0
+#endif
+
+// <q> NRFX_RTC2_ENABLED  - Enable RTC2 instance
+ 
+
+#ifndef NRFX_RTC2_ENABLED
+#define NRFX_RTC2_ENABLED 0
+#endif
+
+// <o> NRFX_RTC_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt 
+#ifndef NRFX_RTC_MAXIMUM_LATENCY_US
+#define NRFX_RTC_MAXIMUM_LATENCY_US 2000
+#endif
+
+// <o> NRFX_RTC_DEFAULT_CONFIG_FREQUENCY - Frequency  <16-32768> 
+
+
+#ifndef NRFX_RTC_DEFAULT_CONFIG_FREQUENCY
+#define NRFX_RTC_DEFAULT_CONFIG_FREQUENCY 32768
+#endif
+
+// <q> NRFX_RTC_DEFAULT_CONFIG_RELIABLE  - Ensures safe compare event triggering
+ 
+
+#ifndef NRFX_RTC_DEFAULT_CONFIG_RELIABLE
+#define NRFX_RTC_DEFAULT_CONFIG_RELIABLE 0
+#endif
+
+// <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_RTC_CONFIG_LOG_ENABLED
+#define NRFX_RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_RTC_CONFIG_LOG_LEVEL
+#define NRFX_RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_RTC_CONFIG_INFO_COLOR
+#define NRFX_RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_RTC_CONFIG_DEBUG_COLOR
+#define NRFX_RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> RTC_ENABLED - nrf_drv_rtc - RTC peripheral driver - legacy layer
+//==========================================================
+#ifndef RTC_ENABLED
+#define RTC_ENABLED 1
+#endif
+// <o> RTC_DEFAULT_CONFIG_FREQUENCY - Frequency  <16-32768> 
+
+
+#ifndef RTC_DEFAULT_CONFIG_FREQUENCY
+#define RTC_DEFAULT_CONFIG_FREQUENCY 32768
+#endif
+
+// <q> RTC_DEFAULT_CONFIG_RELIABLE  - Ensures safe compare event triggering
+ 
+
+#ifndef RTC_DEFAULT_CONFIG_RELIABLE
+#define RTC_DEFAULT_CONFIG_RELIABLE 0
+#endif
+
+// <o> RTC_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef RTC_DEFAULT_CONFIG_IRQ_PRIORITY
+#define RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> RTC0_ENABLED  - Enable RTC0 instance
+ 
+
+#ifndef RTC0_ENABLED
+#define RTC0_ENABLED 0
+#endif
+
+// <q> RTC1_ENABLED  - Enable RTC1 instance
+ 
+
+#ifndef RTC1_ENABLED
+#define RTC1_ENABLED 1
+#endif
+
+// <q> RTC2_ENABLED  - Enable RTC2 instance
+ 
+
+#ifndef RTC2_ENABLED
+#define RTC2_ENABLED 0
+#endif
+
+// <o> NRF_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt 
+#ifndef NRF_MAXIMUM_LATENCY_US
+#define NRF_MAXIMUM_LATENCY_US 2000
+#endif
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/iar/ant_time_synchronization_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/iar/ant_time_synchronization_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/iar/ant_time_synchronization_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/iar/ant_time_synchronization_rx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/iar/ant_time_synchronization_rx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/iar/ant_time_synchronization_rx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/iar/ant_time_synchronization_rx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/iar/ant_time_synchronization_rx_pca10040_s212.ewp
new file mode 100644
index 0000000..9de650b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/iar/ant_time_synchronization_rx_pca10040_s212.ewp
@@ -0,0 +1,1068 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_time_synchronization_rx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_time_synchronization_rx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_time_synchronization_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_rtc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/ses/ant_time_synchronization_rx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/ses/ant_time_synchronization_rx_pca10040_s212.emProject
new file mode 100644
index 0000000..3f8cf9c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/ses/ant_time_synchronization_rx_pca10040_s212.emProject
@@ -0,0 +1,100 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_time_synchronization_rx_pca10040_s212" target="8" version="2">
+  <project Name="ant_time_synchronization_rx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/ant/ant_search_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_rtc.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/ses/ant_time_synchronization_rx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/ses/ant_time_synchronization_rx_pca10040_s212.emSession
new file mode 100644
index 0000000..e1b7e2f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/ses/ant_time_synchronization_rx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_time_synchronization_rx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/rx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/ant_time_synchronization_tx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/ant_time_synchronization_tx.eww
new file mode 100644
index 0000000..597eb02
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/ant_time_synchronization_tx.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_time_synchronization_tx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_time_synchronization_tx_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/arm4/ant_time_synchronization_tx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/arm4/ant_time_synchronization_tx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/arm4/ant_time_synchronization_tx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/arm4/ant_time_synchronization_tx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/arm4/ant_time_synchronization_tx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..1572487
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/arm4/ant_time_synchronization_tx_d52_starterkit_s212.uvproj
@@ -0,0 +1,536 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_rtc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_rtc.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/arm5_no_packs/ant_time_synchronization_tx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/arm5_no_packs/ant_time_synchronization_tx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/arm5_no_packs/ant_time_synchronization_tx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/arm5_no_packs/ant_time_synchronization_tx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/arm5_no_packs/ant_time_synchronization_tx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..f2c3cef
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/arm5_no_packs/ant_time_synchronization_tx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,560 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_rtc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_rtc.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..0124163
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,175 @@
+PROJECT_NAME     := ant_time_synchronization_tx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_time_synchronization_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_rtc.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/util \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/armgcc/ant_time_synchronization_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/armgcc/ant_time_synchronization_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..6153297
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/armgcc/ant_time_synchronization_tx_gcc_nrf52.ld
@@ -0,0 +1,87 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..97eac80
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3877 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> BROADCAST_CHANNEL_NUMBER - Broadcast channel number. 
+#ifndef BROADCAST_CHANNEL_NUMBER
+#define BROADCAST_CHANNEL_NUMBER 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 3
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 3
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> LED_INVERT_PERIOD - Time between LED changes (in 32 kHz counts). 
+#ifndef LED_INVERT_PERIOD
+#define LED_INVERT_PERIOD 21845
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver
+//==========================================================
+#ifndef NRFX_RTC_ENABLED
+#define NRFX_RTC_ENABLED 1
+#endif
+// <q> NRFX_RTC0_ENABLED  - Enable RTC0 instance
+ 
+
+#ifndef NRFX_RTC0_ENABLED
+#define NRFX_RTC0_ENABLED 0
+#endif
+
+// <q> NRFX_RTC1_ENABLED  - Enable RTC1 instance
+ 
+
+#ifndef NRFX_RTC1_ENABLED
+#define NRFX_RTC1_ENABLED 0
+#endif
+
+// <q> NRFX_RTC2_ENABLED  - Enable RTC2 instance
+ 
+
+#ifndef NRFX_RTC2_ENABLED
+#define NRFX_RTC2_ENABLED 0
+#endif
+
+// <o> NRFX_RTC_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt 
+#ifndef NRFX_RTC_MAXIMUM_LATENCY_US
+#define NRFX_RTC_MAXIMUM_LATENCY_US 2000
+#endif
+
+// <o> NRFX_RTC_DEFAULT_CONFIG_FREQUENCY - Frequency  <16-32768> 
+
+
+#ifndef NRFX_RTC_DEFAULT_CONFIG_FREQUENCY
+#define NRFX_RTC_DEFAULT_CONFIG_FREQUENCY 32768
+#endif
+
+// <q> NRFX_RTC_DEFAULT_CONFIG_RELIABLE  - Ensures safe compare event triggering
+ 
+
+#ifndef NRFX_RTC_DEFAULT_CONFIG_RELIABLE
+#define NRFX_RTC_DEFAULT_CONFIG_RELIABLE 0
+#endif
+
+// <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_RTC_CONFIG_LOG_ENABLED
+#define NRFX_RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_RTC_CONFIG_LOG_LEVEL
+#define NRFX_RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_RTC_CONFIG_INFO_COLOR
+#define NRFX_RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_RTC_CONFIG_DEBUG_COLOR
+#define NRFX_RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> RTC_ENABLED - nrf_drv_rtc - RTC peripheral driver - legacy layer
+//==========================================================
+#ifndef RTC_ENABLED
+#define RTC_ENABLED 1
+#endif
+// <o> RTC_DEFAULT_CONFIG_FREQUENCY - Frequency  <16-32768> 
+
+
+#ifndef RTC_DEFAULT_CONFIG_FREQUENCY
+#define RTC_DEFAULT_CONFIG_FREQUENCY 32768
+#endif
+
+// <q> RTC_DEFAULT_CONFIG_RELIABLE  - Ensures safe compare event triggering
+ 
+
+#ifndef RTC_DEFAULT_CONFIG_RELIABLE
+#define RTC_DEFAULT_CONFIG_RELIABLE 0
+#endif
+
+// <o> RTC_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef RTC_DEFAULT_CONFIG_IRQ_PRIORITY
+#define RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> RTC0_ENABLED  - Enable RTC0 instance
+ 
+
+#ifndef RTC0_ENABLED
+#define RTC0_ENABLED 0
+#endif
+
+// <q> RTC1_ENABLED  - Enable RTC1 instance
+ 
+
+#ifndef RTC1_ENABLED
+#define RTC1_ENABLED 1
+#endif
+
+// <q> RTC2_ENABLED  - Enable RTC2 instance
+ 
+
+#ifndef RTC2_ENABLED
+#define RTC2_ENABLED 0
+#endif
+
+// <o> NRF_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt 
+#ifndef NRF_MAXIMUM_LATENCY_US
+#define NRF_MAXIMUM_LATENCY_US 2000
+#endif
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/iar/ant_time_synchronization_tx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/iar/ant_time_synchronization_tx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/iar/ant_time_synchronization_tx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/iar/ant_time_synchronization_tx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/iar/ant_time_synchronization_tx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..361387d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/iar/ant_time_synchronization_tx_d52_starterkit_s212.ewp
@@ -0,0 +1,1062 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_time_synchronization_tx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_time_synchronization_tx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_time_synchronization_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_rtc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/iar/ant_time_synchronization_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/iar/ant_time_synchronization_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/iar/ant_time_synchronization_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/ses/ant_time_synchronization_tx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/ses/ant_time_synchronization_tx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..f79b6ad
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/ses/ant_time_synchronization_tx_d52_starterkit_s212.emProject
@@ -0,0 +1,100 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_time_synchronization_tx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_time_synchronization_tx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_rtc.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/ses/ant_time_synchronization_tx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/ses/ant_time_synchronization_tx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..0b30c81
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/ses/ant_time_synchronization_tx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_time_synchronization_tx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..6ed2859
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,43 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/main.c
new file mode 100644
index 0000000..79408fb
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/main.c
@@ -0,0 +1,285 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2016
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+/*
+ * Before compiling this example for NRF52, complete the following steps:
+ * - Download the S212 SoftDevice from <a href="https://www.thisisant.com/developer/components/nrf52832" target="_blank">thisisant.com</a>.
+ * - Extract the downloaded zip file and copy the S212 SoftDevice headers to <tt>\<InstallFolder\>/components/softdevice/s212/headers</tt>.
+ * If you are using Keil packs, copy the files into a @c headers folder in your example folder.
+ * - Make sure that @ref ANT_LICENSE_KEY in @c nrf_sdm.h is uncommented.
+ */
+
+#include <string.h>
+#include "boards.h"
+#include "app_error.h"
+#include "nrf_drv_rtc.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "nrf_pwr_mgmt.h"
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "ant_channel_config.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+// Arbitrary Page Numbers
+#define TIME_SYNC_PAGE                  0x01
+#define INVALID_PAGE                    0xFF
+
+// Miscellaneous defines.
+#define ANT_RTC_CHANNEL                 0
+#define APP_ANT_OBSERVER_PRIO           1       /**< Application's ANT observer priority. You shouldn't need to modify this value. */
+
+const nrf_drv_rtc_t m_rtc = NRF_DRV_RTC_INSTANCE(1); /**< Declaring an instance of nrf_drv_rtc for RTC1. */
+
+static uint8_t m_led_status      = 0; /**< Current status of LEDs. */
+static uint8_t m_led_invert_next = 0; /**< Index of the next LED to be inverted. */
+
+/**@brief Function for setting payload for ANT message and sending it.
+ */
+void ant_time_sync_message_send()
+{
+    uint32_t err_code;
+    uint8_t  message_payload[ANT_STANDARD_DATA_PAYLOAD_SIZE];
+    uint32_t counter;
+
+    // Get the current RTC counter value
+    counter = nrf_drv_rtc_counter_get(&m_rtc);
+
+    // Set the RTC channel to interrupt again after the LED_INVERT_PERIOD
+    err_code = nrf_drv_rtc_cc_set(&m_rtc, ANT_RTC_CHANNEL, counter + LED_INVERT_PERIOD, true);
+    APP_ERROR_CHECK(err_code);
+
+    // Assign a new value to the broadcast data.
+    memset(message_payload, 0, ANT_STANDARD_DATA_PAYLOAD_SIZE);
+    message_payload[0] = TIME_SYNC_PAGE;
+    message_payload[4] = m_led_invert_next;
+    message_payload[5] = m_led_status;
+    message_payload[6] = (uint8_t) LSB_32(counter);        // 2-byte counter LSB
+    message_payload[7] = (uint8_t) LSB_32(counter >> 8);   // 2-byte counter MSB
+
+    // Broadcast the data.
+    err_code = sd_ant_time_sync_broadcast_tx(BROADCAST_CHANNEL_NUMBER,
+                                             ANT_STANDARD_DATA_PAYLOAD_SIZE,
+                                             message_payload);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**@brief Function for handling a ANT stack event.
+ *
+ * @param[in] p_ant_evt  ANT stack event.
+ * @param[in] p_context  Context.
+ */
+void ant_evt_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    nrf_pwr_mgmt_feed();
+    if (p_ant_evt->channel == BROADCAST_CHANNEL_NUMBER)
+    {
+        switch (p_ant_evt->event)
+        {
+            case EVENT_TX:
+                // Event called when message is sent
+                break;
+
+            default:
+                break;
+        }
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, APP_ANT_OBSERVER_PRIO, ant_evt_handler, NULL);
+
+
+/**@brief Function for ANT stack initialization.
+ *
+ * @details Initializes the SoftDevice and the ANT event interrupt.
+ */
+static void softdevice_setup(void)
+{
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**@brief Function for handling the LED's when RTC interrupt occurs.
+ *
+ */
+static void led_event(void)
+{
+    bsp_board_led_invert(m_led_invert_next);
+
+    m_led_status      ^= 1 << (m_led_invert_next++); // Update current status of LEDs
+    m_led_invert_next %= LEDS_NUMBER;                // Update next LED to be inverted
+}
+
+
+/** @brief: Function for handling the RTC1 interrupts.
+ * Triggered on COMPARE0 match.
+ */
+static void rtc_handler(nrf_drv_rtc_int_type_t int_type)
+{
+    if (int_type == NRF_DRV_RTC_INT_COMPARE0)
+    {
+        led_event();
+        ant_time_sync_message_send();
+    }
+}
+
+
+/**@brief Function for setting up the ANT module to be ready for TX broadcast.
+ */
+static void ant_channel_tx_broadcast_setup(void)
+{
+    uint32_t             err_code;
+    ANT_TIME_SYNC_CONFIG syncConfig;
+
+    // Configure ANT Time Synchronization using RTC1
+    syncConfig.ucTimeBase           = ANT_TIME_BASE_ALT1; // RTC1
+    syncConfig.bInvalidationEnabled = true;
+    syncConfig.ucInvalidationByte   = INVALID_PAGE;       // Invalid page number set to 0xFF
+    err_code                        = sd_ant_time_sync_config_set(&syncConfig);
+    APP_ERROR_CHECK(err_code);
+
+    // Configure ANT Channel
+    ant_channel_config_t broadcast_channel_config =
+    {
+        .channel_number    = BROADCAST_CHANNEL_NUMBER,
+        .channel_type      = CHANNEL_TYPE_MASTER,
+        .ext_assign        = 0x00,
+        .rf_freq           = RF_FREQ,
+        .transmission_type = CHAN_ID_TRANS_TYPE,
+        .device_type       = CHAN_ID_DEV_TYPE,
+        .device_number     = CHAN_ID_DEV_NUM,
+        .channel_period    = CHAN_PERIOD,
+        .network_number    = ANT_NETWORK_NUM,
+    };
+
+    err_code = ant_channel_init(&broadcast_channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Open channel.
+    err_code = sd_ant_channel_open(BROADCAST_CHANNEL_NUMBER);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/** @brief Function initialization and configuration of RTC driver instance.
+ */
+static void rtc_config(void)
+{
+    uint32_t err_code;
+
+    // Initialize RTC instance
+    nrf_drv_rtc_config_t config = NRF_DRV_RTC_DEFAULT_CONFIG;
+
+    err_code = nrf_drv_rtc_init(&m_rtc, &config, rtc_handler);
+    APP_ERROR_CHECK(err_code);
+
+    // Enable tick event & interrupt
+    nrf_drv_rtc_tick_enable(&m_rtc, true);
+
+    // Set compare channel to trigger interrupt after LED_INVERT_PERIOD
+    err_code = nrf_drv_rtc_cc_set(&m_rtc, ANT_RTC_CHANNEL, LED_INVERT_PERIOD, true);
+    APP_ERROR_CHECK(err_code);
+
+    // Power on RTC instance
+    nrf_drv_rtc_enable(&m_rtc);
+}
+
+
+/**@brief Function for the Power Manager initialization.
+ */
+static void utils_setup(void)
+{
+    ret_code_t err_code = nrf_pwr_mgmt_init();
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+    softdevice_setup();
+    rtc_config();
+    bsp_board_init(BSP_INIT_LEDS);
+    ant_channel_tx_broadcast_setup();
+
+    NRF_LOG_INFO("ANT Time Synchronization TX example started.");
+
+    // Main loop.
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+        nrf_pwr_mgmt_run();
+    }
+}
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/arm4/ant_time_synchronization_tx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/arm4/ant_time_synchronization_tx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/arm4/ant_time_synchronization_tx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/arm4/ant_time_synchronization_tx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/arm4/ant_time_synchronization_tx_pca10040_s212.uvproj
new file mode 100644
index 0000000..b29fa3d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/arm4/ant_time_synchronization_tx_pca10040_s212.uvproj
@@ -0,0 +1,533 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_rtc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_rtc.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/arm5_no_packs/ant_time_synchronization_tx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/arm5_no_packs/ant_time_synchronization_tx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/arm5_no_packs/ant_time_synchronization_tx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/arm5_no_packs/ant_time_synchronization_tx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/arm5_no_packs/ant_time_synchronization_tx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..46d0924
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/arm5_no_packs/ant_time_synchronization_tx_pca10040_s212.uvprojx
@@ -0,0 +1,557 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\..\..\components\libraries\pwr_mgmt;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_rtc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_rtc.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_pwr_mgmt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..478d572
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,178 @@
+PROJECT_NAME     := ant_time_synchronization_tx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_time_synchronization_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_rtc.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/libraries/atomic \
+  ../config \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/mutex \
+  $(SDK_ROOT)/components/libraries/pwr_mgmt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/util \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/armgcc/ant_time_synchronization_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/armgcc/ant_time_synchronization_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..699b72c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/armgcc/ant_time_synchronization_tx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .pwr_mgmt_data :
+  {
+    PROVIDE(__start_pwr_mgmt_data = .);
+    KEEP(*(SORT(.pwr_mgmt_data*)))
+    PROVIDE(__stop_pwr_mgmt_data = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..35c4676
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3821 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> ANT_NETWORK_NUM - Network number. 
+#ifndef ANT_NETWORK_NUM
+#define ANT_NETWORK_NUM 0
+#endif
+
+// <o> BROADCAST_CHANNEL_NUMBER - Broadcast channel number. 
+#ifndef BROADCAST_CHANNEL_NUMBER
+#define BROADCAST_CHANNEL_NUMBER 0
+#endif
+
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 3
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 3
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> LED_INVERT_PERIOD - Time between LED changes (in 32 kHz counts). 
+#ifndef LED_INVERT_PERIOD
+#define LED_INVERT_PERIOD 21845
+#endif
+
+// <o> RF_FREQ - RF Frequency. 
+#ifndef RF_FREQ
+#define RF_FREQ 66
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver
+//==========================================================
+#ifndef NRFX_RTC_ENABLED
+#define NRFX_RTC_ENABLED 1
+#endif
+// <q> NRFX_RTC0_ENABLED  - Enable RTC0 instance
+ 
+
+#ifndef NRFX_RTC0_ENABLED
+#define NRFX_RTC0_ENABLED 0
+#endif
+
+// <q> NRFX_RTC1_ENABLED  - Enable RTC1 instance
+ 
+
+#ifndef NRFX_RTC1_ENABLED
+#define NRFX_RTC1_ENABLED 0
+#endif
+
+// <q> NRFX_RTC2_ENABLED  - Enable RTC2 instance
+ 
+
+#ifndef NRFX_RTC2_ENABLED
+#define NRFX_RTC2_ENABLED 0
+#endif
+
+// <o> NRFX_RTC_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt 
+#ifndef NRFX_RTC_MAXIMUM_LATENCY_US
+#define NRFX_RTC_MAXIMUM_LATENCY_US 2000
+#endif
+
+// <o> NRFX_RTC_DEFAULT_CONFIG_FREQUENCY - Frequency  <16-32768> 
+
+
+#ifndef NRFX_RTC_DEFAULT_CONFIG_FREQUENCY
+#define NRFX_RTC_DEFAULT_CONFIG_FREQUENCY 32768
+#endif
+
+// <q> NRFX_RTC_DEFAULT_CONFIG_RELIABLE  - Ensures safe compare event triggering
+ 
+
+#ifndef NRFX_RTC_DEFAULT_CONFIG_RELIABLE
+#define NRFX_RTC_DEFAULT_CONFIG_RELIABLE 0
+#endif
+
+// <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_RTC_CONFIG_LOG_ENABLED
+#define NRFX_RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_RTC_CONFIG_LOG_LEVEL
+#define NRFX_RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_RTC_CONFIG_INFO_COLOR
+#define NRFX_RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_RTC_CONFIG_DEBUG_COLOR
+#define NRFX_RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> RTC_ENABLED - nrf_drv_rtc - RTC peripheral driver - legacy layer
+//==========================================================
+#ifndef RTC_ENABLED
+#define RTC_ENABLED 1
+#endif
+// <o> RTC_DEFAULT_CONFIG_FREQUENCY - Frequency  <16-32768> 
+
+
+#ifndef RTC_DEFAULT_CONFIG_FREQUENCY
+#define RTC_DEFAULT_CONFIG_FREQUENCY 32768
+#endif
+
+// <q> RTC_DEFAULT_CONFIG_RELIABLE  - Ensures safe compare event triggering
+ 
+
+#ifndef RTC_DEFAULT_CONFIG_RELIABLE
+#define RTC_DEFAULT_CONFIG_RELIABLE 0
+#endif
+
+// <o> RTC_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef RTC_DEFAULT_CONFIG_IRQ_PRIORITY
+#define RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> RTC0_ENABLED  - Enable RTC0 instance
+ 
+
+#ifndef RTC0_ENABLED
+#define RTC0_ENABLED 0
+#endif
+
+// <q> RTC1_ENABLED  - Enable RTC1 instance
+ 
+
+#ifndef RTC1_ENABLED
+#define RTC1_ENABLED 1
+#endif
+
+// <q> RTC2_ENABLED  - Enable RTC2 instance
+ 
+
+#ifndef RTC2_ENABLED
+#define RTC2_ENABLED 0
+#endif
+
+// <o> NRF_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt 
+#ifndef NRF_MAXIMUM_LATENCY_US
+#define NRF_MAXIMUM_LATENCY_US 2000
+#endif
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
+//==========================================================
+#ifndef NRF_PWR_MGMT_ENABLED
+#define NRF_PWR_MGMT_ENABLED 1
+#endif
+// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
+
+// <i> Selected pin will be set when CPU is in sleep mode.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
+#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN  - Pin number
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+// <4294967295=> Not connected 
+
+#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
+#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED  - Enables CPU usage monitor.
+ 
+
+// <i> Module will trace percentage of CPU usage in one second intervals.
+
+#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
+#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
+#endif
+
+// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). 
+// <i> Shutdown procedure will begin no earlier than after this number of seconds.
+
+#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
+#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
+#endif
+
+// </e>
+
+// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED  - Enables FPU event cleaning.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
+#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY  - Blocked shutdown procedure will be retried every second.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
+#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
+#endif
+
+// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER  - Module will use @ref app_scheduler.
+ 
+
+#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
+#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. 
+// <i> The number of stages of the shutdown process.
+
+#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
+#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
+#endif
+
+// </e>
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/iar/ant_time_synchronization_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/iar/ant_time_synchronization_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/iar/ant_time_synchronization_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/iar/ant_time_synchronization_tx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/iar/ant_time_synchronization_tx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/iar/ant_time_synchronization_tx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/iar/ant_time_synchronization_tx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/iar/ant_time_synchronization_tx_pca10040_s212.ewp
new file mode 100644
index 0000000..2f0bca1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/iar/ant_time_synchronization_tx_pca10040_s212.ewp
@@ -0,0 +1,1065 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\mutex</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_time_synchronization_tx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_time_synchronization_tx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_time_synchronization_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\pwr_mgmt\nrf_pwr_mgmt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_rtc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/ses/ant_time_synchronization_tx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/ses/ant_time_synchronization_tx_pca10040_s212.emProject
new file mode 100644
index 0000000..21ee7a1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/ses/ant_time_synchronization_tx_pca10040_s212.emProject
@@ -0,0 +1,99 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_time_synchronization_tx_pca10040_s212" target="8" version="2">
+  <project Name="ant_time_synchronization_tx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../components;../../../../../../../components/ant/ant_channel_config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/hardfault;../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../components/libraries/mutex;../../../../../../../components/libraries/pwr_mgmt;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../external/segger_rtt;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../components/libraries/pwr_mgmt/nrf_pwr_mgmt.c" />
+      <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_rtc.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/ses/ant_time_synchronization_tx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/ses/ant_time_synchronization_tx_pca10040_s212.emSession
new file mode 100644
index 0000000..afb8d48
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/ses/ant_time_synchronization_tx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_time_synchronization_tx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..acaa884
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/ant_time_synchronization/tx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".pwr_mgmt_data" inputsections="*(SORT(.pwr_mgmt_data*))" address_symbol="__start_pwr_mgmt_data" end_symbol="__stop_pwr_mgmt_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/ant_frequency_agility_rx.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/ant_frequency_agility_rx.c
new file mode 100644
index 0000000..43cdd68
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/ant_frequency_agility_rx.c
@@ -0,0 +1,255 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+
+#include "ant_frequency_agility_rx.h"
+#include <stdint.h>
+#include "string.h"
+#include "sdk_config.h"
+#include "bsp.h"
+#include "nrf_soc.h"
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "ant_channel_config.h"
+#include "ant_search_config.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "app_error.h"
+#include "ant_error.h"
+
+//ANT Channels
+#define ANT_CHANNEL_NUMBER              0x00                    /**< ANT Channel 0. */
+#define EXT_ASSIGN                      EXT_PARAM_FREQUENCY_AGILITY   /**< ANT Ext Assign. */
+#define ANT_CHANNEL_DEFAULT_NETWORK     0x00                    /**< ANT Network (default public network). */
+
+// Data Page Numbers
+#define DIGITALIO_DATA_PID              1u                      /**< Page number: digital data. */
+
+// Static variables and buffers.
+static uint8_t m_broadcast_data[ANT_STANDARD_DATA_PAYLOAD_SIZE];    /**< Primary data transmit buffer. */
+static uint8_t m_rx_input_pin_state = 0xFF;                         /**< State of received digital data, from the other node. */
+static uint8_t m_tx_input_pin_state = 0xFF;                         /**< State of digital inputs in this node, for transmission. */
+
+
+/**@brief Encode current state of buttons
+ *
+ * Configure bitfield encoding the state of the buttons
+ * Bit 0 = 0 if button 0 is pressed
+ * Bit 1 = 0 if button 1 is pressed
+ * Bit 2 = 0 if button 2 is pressed
+ * Bit 3 = 0 if button 3 is pressed
+ * Bit 4-7 = 1 (unused)
+ */
+static void encode_button_state(void)
+{
+    m_tx_input_pin_state = 0xFF;
+
+    if (bsp_button_is_pressed(0))
+    {
+        m_tx_input_pin_state &= 0xFE;
+    }
+
+    if (bsp_button_is_pressed(1))
+    {
+        m_tx_input_pin_state &= 0xFD;
+    }
+
+    if (bsp_button_is_pressed(2))
+    {
+        m_tx_input_pin_state &= 0xFB;
+    }
+
+    if (bsp_button_is_pressed(3))
+    {
+        m_tx_input_pin_state &= 0xF7;
+    }
+}
+
+
+/**@brief Formats page with current button state and sends data
+ * Byte 0   = Page number (Digital I/O Data)
+ * Byte 1-6 = Reserved
+ * Byte 7   = State of digital inputs
+ */
+static void handle_transmit()
+{
+    uint32_t err_code;
+
+    encode_button_state();
+
+    m_broadcast_data[0] = DIGITALIO_DATA_PID;
+    m_broadcast_data[1] = 0xFF;
+    m_broadcast_data[2] = 0xFF;
+    m_broadcast_data[3] = 0xFF;
+    m_broadcast_data[4] = 0xFF;
+    m_broadcast_data[5] = 0xFF;
+    m_broadcast_data[6] = 0xFF;
+    m_broadcast_data[7] = m_tx_input_pin_state;
+
+    err_code = sd_ant_broadcast_message_tx(ANT_CHANNEL_NUMBER, ANT_STANDARD_DATA_PAYLOAD_SIZE, m_broadcast_data);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Turns on LEDs according to the contents of the received data page.
+ */
+static void set_led_state()
+{
+    uint8_t led_state_field = ~m_rx_input_pin_state;
+
+    if (led_state_field & 1)
+        bsp_board_led_on(BSP_BOARD_LED_0);
+    else
+        bsp_board_led_off(BSP_BOARD_LED_0);
+
+    if (led_state_field & 2)
+        bsp_board_led_on(BSP_BOARD_LED_1);
+    else
+        bsp_board_led_off(BSP_BOARD_LED_1);
+
+    if (led_state_field & 4)
+        bsp_board_led_on(BSP_BOARD_LED_2);
+    else
+        bsp_board_led_off(BSP_BOARD_LED_2);
+
+    if (led_state_field & 8)
+        bsp_board_led_on(BSP_BOARD_LED_3);
+    else
+        bsp_board_led_off(BSP_BOARD_LED_3);
+
+}
+
+
+void ant_freq_ag_setup(void)
+{
+    uint32_t err_code;
+
+    ant_channel_config_t channel_config =
+    {
+        .channel_number     = ANT_CHANNEL_NUMBER,
+        .channel_type       = CHANNEL_TYPE_SLAVE,
+        .ext_assign         = EXT_ASSIGN,
+        .rf_freq            = RF_FREQUENCY_A,
+        .transmission_type  = CHAN_ID_TRANS_TYPE,
+        .device_type        = CHAN_ID_DEV_TYPE,
+        .device_number      = CHAN_ID_DEV_NUM,
+        .channel_period     = CHAN_PERIOD,
+        .network_number     = ANT_CHANNEL_DEFAULT_NETWORK,
+    };
+
+
+    ant_search_config_t search_config  = DEFAULT_ANT_SEARCH_CONFIG(ANT_CHANNEL_NUMBER);
+    search_config.high_priority_timeout = 12;
+    search_config.low_priority_timeout = ANT_LOW_PRIORITY_SEARCH_DISABLE;
+
+    // Configure channel parameters
+    err_code = ant_channel_init(&channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Configure search
+    err_code = ant_search_init(&search_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Configure the frequency agility hop table.
+    err_code = sd_ant_auto_freq_hop_table_set(ANT_CHANNEL_NUMBER, RF_FREQUENCY_A, RF_FREQUENCY_B, RF_FREQUENCY_C);
+    APP_ERROR_CHECK(err_code);
+
+    // Open channel.
+    err_code = sd_ant_channel_open(ANT_CHANNEL_NUMBER);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+static void ant_freq_ag_event_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    uint32_t err_code;
+    uint8_t channel_status = 0;
+    ANT_MESSAGE * p_message = (ANT_MESSAGE*) p_ant_evt->message.aucMessage;
+
+    switch (p_ant_evt->event)
+    {
+        case EVENT_RX:
+           if (p_message->ANT_MESSAGE_aucPayload[0] == DIGITALIO_DATA_PID)
+           {
+               //Set LEDs according to Received Digital IO Data Page
+               m_rx_input_pin_state = p_message->ANT_MESSAGE_aucPayload[7];
+               set_led_state();
+           }
+           // Transmit data on the reverse direction every channel period
+           handle_transmit();
+           break;
+
+        case EVENT_TX:
+        case EVENT_TRANSFER_TX_COMPLETED:
+        case EVENT_TRANSFER_TX_FAILED:
+          // Transmit data on the reverse direction every channel period
+          handle_transmit();
+          break;
+
+        case EVENT_CHANNEL_CLOSED:
+            // Re -open the channel
+            err_code = sd_ant_channel_status_get (ANT_CHANNEL_NUMBER, &channel_status);
+            APP_ERROR_CHECK(err_code);
+
+            if ((channel_status & STATUS_CHANNEL_STATE_MASK) == STATUS_ASSIGNED_CHANNEL)
+            {
+                err_code = sd_ant_channel_open(ANT_CHANNEL_NUMBER);
+                APP_ERROR_CHECK(err_code);
+            }
+            break;
+
+        case EVENT_RX_SEARCH_TIMEOUT:
+        default:
+          break;
+    }
+}
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, 1, ant_freq_ag_event_handler, NULL);
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/ant_frequency_agility_rx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/ant_frequency_agility_rx.eww
new file mode 100644
index 0000000..a90d12e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/ant_frequency_agility_rx.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_frequency_agility_rx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_frequency_agility_rx_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/ant_frequency_agility_rx.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/ant_frequency_agility_rx.h
new file mode 100644
index 0000000..f038b75
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/ant_frequency_agility_rx.h
@@ -0,0 +1,64 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+
+
+#ifndef ANT_FA_TX_H__
+#define ANT_FA_TX_H__
+
+
+/**@brief Function for configuring and opening master channel.
+ *
+ */
+void ant_freq_ag_setup(void);
+
+
+#endif  // ANT_IO_RX_H__
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/arm4/ant_frequency_agility_rx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/arm4/ant_frequency_agility_rx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/arm4/ant_frequency_agility_rx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/arm4/ant_frequency_agility_rx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/arm4/ant_frequency_agility_rx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..7c1e53b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/arm4/ant_frequency_agility_rx_d52_starterkit_s212.uvproj
@@ -0,0 +1,563 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_frequency_agility_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_frequency_agility_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath>            </File>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_power_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/arm5_no_packs/ant_frequency_agility_rx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/arm5_no_packs/ant_frequency_agility_rx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/arm5_no_packs/ant_frequency_agility_rx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/arm5_no_packs/ant_frequency_agility_rx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/arm5_no_packs/ant_frequency_agility_rx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..1ab8060
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/arm5_no_packs/ant_frequency_agility_rx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,587 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_frequency_agility_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_frequency_agility_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath>            </File>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_power_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..800aba8
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,188 @@
+PROJECT_NAME     := ant_frequency_agility_rx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_frequency_agility_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_clock.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_clock.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_power_clock.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_frequency_agility_rx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  ../config \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/timer \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/armgcc/ant_frequency_agility_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/armgcc/ant_frequency_agility_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..7e654a4
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/armgcc/ant_frequency_agility_rx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..921d17a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3958 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 5
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQUENCY_A - RF Frequency. 
+#ifndef RF_FREQUENCY_A
+#define RF_FREQUENCY_A 3
+#endif
+
+// <o> RF_FREQUENCY_B - RF Frequency. 
+#ifndef RF_FREQUENCY_B
+#define RF_FREQUENCY_B 39
+#endif
+
+// <o> RF_FREQUENCY_C - RF Frequency. 
+#ifndef RF_FREQUENCY_C
+#define RF_FREQUENCY_C 75
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer
+//==========================================================
+#ifndef CLOCK_ENABLED
+#define CLOCK_ENABLED 1
+#endif
+// <o> CLOCK_CONFIG_LF_SRC  - LF Clock Source
+ 
+// <0=> RC 
+// <1=> XTAL 
+// <2=> Synth 
+
+#ifndef CLOCK_CONFIG_LF_SRC
+#define CLOCK_CONFIG_LF_SRC 1
+#endif
+
+// <o> CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef CLOCK_CONFIG_IRQ_PRIORITY
+#define CLOCK_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
+//==========================================================
+#ifndef NRFX_CLOCK_ENABLED
+#define NRFX_CLOCK_ENABLED 1
+#endif
+// <o> NRFX_CLOCK_CONFIG_LF_SRC  - LF Clock Source
+ 
+// <0=> RC 
+// <1=> XTAL 
+// <2=> Synth 
+
+#ifndef NRFX_CLOCK_CONFIG_LF_SRC
+#define NRFX_CLOCK_CONFIG_LF_SRC 1
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY
+#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED
+#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL
+#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR
+#define NRFX_CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR
+#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/iar/ant_frequency_agility_rx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/iar/ant_frequency_agility_rx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/iar/ant_frequency_agility_rx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/iar/ant_frequency_agility_rx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/iar/ant_frequency_agility_rx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..d120b92
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/iar/ant_frequency_agility_rx_d52_starterkit_s212.ewp
@@ -0,0 +1,1079 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_frequency_agility_rx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_frequency_agility_rx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_frequency_agility_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_frequency_agility_rx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/iar/ant_frequency_agility_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/iar/ant_frequency_agility_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/iar/ant_frequency_agility_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/ses/ant_frequency_agility_rx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/ses/ant_frequency_agility_rx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..e4001ca
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/ses/ant_frequency_agility_rx_d52_starterkit_s212.emProject
@@ -0,0 +1,110 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_frequency_agility_rx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_frequency_agility_rx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_search_config;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_clock.c" />
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_clock.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_power_clock.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_frequency_agility_rx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/ses/ant_frequency_agility_rx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/ses/ant_frequency_agility_rx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..9c407b0
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/ses/ant_frequency_agility_rx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_frequency_agility_rx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..7b73f5c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/main.c
new file mode 100644
index 0000000..8c33611
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/main.c
@@ -0,0 +1,130 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2016
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+
+#include <stdint.h>
+#include "nrf.h"
+#include "nrf_soc.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "bsp.h"
+#include "hardfault.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "ant_frequency_agility_rx.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+#define APP_TIMER_PRESCALER             0                    /**< Value of the RTC1 PRESCALER register. */
+#define APP_TIMER_OP_QUEUE_SIZE         2u                   /**< Size of timer operation queues. */
+
+
+/**@brief Function for the Timer and BSP initialization.
+ */
+static void utils_setup(void)
+{
+    uint32_t err_code;
+
+    err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS, NULL);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+
+    // Setup and start ANT channel
+    ant_freq_ag_setup();
+
+    NRF_LOG_INFO("ANT Frequency Agility RX example started.");
+
+    // Enter main loop.
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+
+        err_code = sd_app_evt_wait();
+        APP_ERROR_CHECK(err_code);
+    }
+}
+
+
+/**
+ *@}
+ **/
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/arm4/ant_frequency_agility_rx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/arm4/ant_frequency_agility_rx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/arm4/ant_frequency_agility_rx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/arm4/ant_frequency_agility_rx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/arm4/ant_frequency_agility_rx_pca10040_s212.uvproj
new file mode 100644
index 0000000..e98d497
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/arm4/ant_frequency_agility_rx_pca10040_s212.uvproj
@@ -0,0 +1,563 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_frequency_agility_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_frequency_agility_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath>            </File>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_power_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/arm5_no_packs/ant_frequency_agility_rx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/arm5_no_packs/ant_frequency_agility_rx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/arm5_no_packs/ant_frequency_agility_rx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/arm5_no_packs/ant_frequency_agility_rx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/arm5_no_packs/ant_frequency_agility_rx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..b68475a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/arm5_no_packs/ant_frequency_agility_rx_pca10040_s212.uvprojx
@@ -0,0 +1,587 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_frequency_agility_rx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_frequency_agility_rx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath>            </File>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_power_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..9bb3294
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,192 @@
+PROJECT_NAME     := ant_frequency_agility_rx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_frequency_agility_rx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_clock.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_clock.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_power_clock.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_frequency_agility_rx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  ../config \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/timer \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/armgcc/ant_frequency_agility_rx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/armgcc/ant_frequency_agility_rx_gcc_nrf52.ld
new file mode 100644
index 0000000..54ab60a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/armgcc/ant_frequency_agility_rx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..3300cf4
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3958 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> CHAN_ID_DEV_NUM - Channel ID: Device Number. 
+#ifndef CHAN_ID_DEV_NUM
+#define CHAN_ID_DEV_NUM 0
+#endif
+
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 5
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQUENCY_A - RF Frequency. 
+#ifndef RF_FREQUENCY_A
+#define RF_FREQUENCY_A 3
+#endif
+
+// <o> RF_FREQUENCY_B - RF Frequency. 
+#ifndef RF_FREQUENCY_B
+#define RF_FREQUENCY_B 39
+#endif
+
+// <o> RF_FREQUENCY_C - RF Frequency. 
+#ifndef RF_FREQUENCY_C
+#define RF_FREQUENCY_C 75
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer
+//==========================================================
+#ifndef CLOCK_ENABLED
+#define CLOCK_ENABLED 1
+#endif
+// <o> CLOCK_CONFIG_LF_SRC  - LF Clock Source
+ 
+// <0=> RC 
+// <1=> XTAL 
+// <2=> Synth 
+
+#ifndef CLOCK_CONFIG_LF_SRC
+#define CLOCK_CONFIG_LF_SRC 1
+#endif
+
+// <o> CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef CLOCK_CONFIG_IRQ_PRIORITY
+#define CLOCK_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
+//==========================================================
+#ifndef NRFX_CLOCK_ENABLED
+#define NRFX_CLOCK_ENABLED 1
+#endif
+// <o> NRFX_CLOCK_CONFIG_LF_SRC  - LF Clock Source
+ 
+// <0=> RC 
+// <1=> XTAL 
+// <2=> Synth 
+
+#ifndef NRFX_CLOCK_CONFIG_LF_SRC
+#define NRFX_CLOCK_CONFIG_LF_SRC 1
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY
+#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED
+#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL
+#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR
+#define NRFX_CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR
+#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/iar/ant_frequency_agility_rx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/iar/ant_frequency_agility_rx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/iar/ant_frequency_agility_rx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/iar/ant_frequency_agility_rx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/iar/ant_frequency_agility_rx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/iar/ant_frequency_agility_rx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/iar/ant_frequency_agility_rx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/iar/ant_frequency_agility_rx_pca10040_s212.ewp
new file mode 100644
index 0000000..41e2367
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/iar/ant_frequency_agility_rx_pca10040_s212.ewp
@@ -0,0 +1,1083 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_frequency_agility_rx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_frequency_agility_rx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_frequency_agility_rx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_frequency_agility_rx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/ses/ant_frequency_agility_rx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/ses/ant_frequency_agility_rx_pca10040_s212.emProject
new file mode 100644
index 0000000..68b7090
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/ses/ant_frequency_agility_rx_pca10040_s212.emProject
@@ -0,0 +1,110 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_frequency_agility_rx_pca10040_s212" target="8" version="2">
+  <project Name="ant_frequency_agility_rx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_search_config;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_clock.c" />
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_clock.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_power_clock.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_frequency_agility_rx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/ses/ant_frequency_agility_rx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/ses/ant_frequency_agility_rx_pca10040_s212.emSession
new file mode 100644
index 0000000..be2a336
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/ses/ant_frequency_agility_rx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_frequency_agility_rx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..737f8f3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_rx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/ant_frequency_agility_tx.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/ant_frequency_agility_tx.c
new file mode 100644
index 0000000..3cdf1b4
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/ant_frequency_agility_tx.c
@@ -0,0 +1,240 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+
+#include "ant_frequency_agility_tx.h"
+#include <stdint.h>
+#include "string.h"
+#include "sdk_config.h"
+#include "bsp.h"
+#include "nrf_soc.h"
+#include "ant_interface.h"
+#include "ant_parameters.h"
+#include "ant_channel_config.h"
+#include "ant_search_config.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "app_error.h"
+#include "ant_error.h"
+
+//ANT Channels
+#define ANT_CHANNEL_NUMBER              0x00                    /**< ANT Channel 0. */
+#define EXT_ASSIGN                      EXT_PARAM_FREQUENCY_AGILITY   /**< ANT Ext Assign. */
+#define ANT_CHANNEL_DEFAULT_NETWORK     0x00                    /**< ANT Network (default public network). */
+
+// Channel ID configuration.
+#define CHAN_ID_DEV_NUM                 (NRF_FICR->DEVICEID[0]) /**< Device number. */
+
+// Data Page Numbers
+#define DIGITALIO_DATA_PID              1u                      /**< Page number: digital data. */
+
+// Static variables and buffers.
+static uint8_t m_broadcast_data[ANT_STANDARD_DATA_PAYLOAD_SIZE];    /**< Primary data transmit buffer. */
+static uint8_t m_rx_input_pin_state = 0xFF;                         /**< State of received digital data, from the other node. */
+static uint8_t m_tx_input_pin_state = 0xFF;                         /**< State of digital inputs in this node, for transmission. */
+
+
+/**@brief Encode current state of buttons
+ *
+ * Configure bitfield encoding the state of the buttons
+ * Bit 0 = 0 if button 0 is pressed
+ * Bit 1 = 0 if button 1 is pressed
+ * Bit 2 = 0 if button 2 is pressed
+ * Bit 3 = 0 if button 3 is pressed
+ * Bit 4-7 = 1 (unused)
+ */
+static void encode_button_state(void)
+{
+    m_tx_input_pin_state = 0xFF;
+
+    if (bsp_button_is_pressed(0))
+    {
+        m_tx_input_pin_state &= 0xFE;
+    }
+
+    if (bsp_button_is_pressed(1))
+    {
+        m_tx_input_pin_state &= 0xFD;
+    }
+
+    if (bsp_button_is_pressed(2))
+    {
+        m_tx_input_pin_state &= 0xFB;
+    }
+
+    if (bsp_button_is_pressed(3))
+    {
+        m_tx_input_pin_state &= 0xF7;
+    }
+}
+
+
+/**@brief Formats page with current button state and sends data
+ * Byte 0   = Page number (Digital I/O Data)
+ * Byte 1-6 = Reserved
+ * Byte 7   = State of digital inputs
+ */
+static void handle_transmit()
+{
+    uint32_t err_code;
+
+    encode_button_state();
+
+    m_broadcast_data[0] = DIGITALIO_DATA_PID;
+    m_broadcast_data[1] = 0xFF;
+    m_broadcast_data[2] = 0xFF;
+    m_broadcast_data[3] = 0xFF;
+    m_broadcast_data[4] = 0xFF;
+    m_broadcast_data[5] = 0xFF;
+    m_broadcast_data[6] = 0xFF;
+    m_broadcast_data[7] = m_tx_input_pin_state;
+
+    err_code = sd_ant_broadcast_message_tx(ANT_CHANNEL_NUMBER, ANT_STANDARD_DATA_PAYLOAD_SIZE, m_broadcast_data);
+    APP_ERROR_CHECK(err_code);
+}
+
+/**@brief Turns on LEDs according to the contents of the received data page.
+ */
+static void set_led_state()
+{
+    uint8_t led_state_field = ~m_rx_input_pin_state;
+
+    if (led_state_field & 1)
+        bsp_board_led_on(BSP_BOARD_LED_0);
+    else
+        bsp_board_led_off(BSP_BOARD_LED_0);
+
+    if (led_state_field & 2)
+        bsp_board_led_on(BSP_BOARD_LED_1);
+    else
+        bsp_board_led_off(BSP_BOARD_LED_1);
+
+    if (led_state_field & 4)
+        bsp_board_led_on(BSP_BOARD_LED_2);
+    else
+        bsp_board_led_off(BSP_BOARD_LED_2);
+
+    if (led_state_field & 8)
+        bsp_board_led_on(BSP_BOARD_LED_3);
+    else
+        bsp_board_led_off(BSP_BOARD_LED_3);
+
+}
+
+
+void ant_freq_ag_setup(void)
+{
+    uint32_t err_code;
+
+    ant_channel_config_t channel_config =
+    {
+        .channel_number     = ANT_CHANNEL_NUMBER,
+        .channel_type       = CHANNEL_TYPE_MASTER,
+        .ext_assign         = EXT_ASSIGN,
+        .rf_freq            = RF_FREQUENCY_A,
+        .transmission_type  = CHAN_ID_TRANS_TYPE,
+        .device_type        = CHAN_ID_DEV_TYPE,
+        .device_number      = CHAN_ID_DEV_NUM,
+        .channel_period     = CHAN_PERIOD,
+        .network_number     = ANT_CHANNEL_DEFAULT_NETWORK,
+    };
+
+    // Search must also be set on the master. It must match that which is on the slave.
+    ant_search_config_t search_config  = DEFAULT_ANT_SEARCH_CONFIG(ANT_CHANNEL_NUMBER);
+    search_config.high_priority_timeout = ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT + ANT_DEFAULT_LOW_PRIORITY_TIMEOUT;
+    search_config.low_priority_timeout = 0;
+
+    // Configure channel parameters
+    err_code = ant_channel_init(&channel_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Configure search
+    err_code = ant_search_init(&search_config);
+    APP_ERROR_CHECK(err_code);
+
+    // Configure the frequency agility hop table.
+    err_code = sd_ant_auto_freq_hop_table_set(ANT_CHANNEL_NUMBER, RF_FREQUENCY_A, RF_FREQUENCY_B, RF_FREQUENCY_C);
+    APP_ERROR_CHECK(err_code);
+
+
+    // Open channel.
+    err_code = sd_ant_channel_open(ANT_CHANNEL_NUMBER);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+static void ant_freq_ag_event_handler(ant_evt_t * p_ant_evt, void * p_context)
+{
+    ANT_MESSAGE * p_message = (ANT_MESSAGE*) p_ant_evt->message.aucMessage;
+
+    switch (p_ant_evt->event)
+    {
+        case EVENT_RX:
+           if (p_message->ANT_MESSAGE_aucPayload[0] == DIGITALIO_DATA_PID)
+           {
+               //Set LEDs according to Received Digital IO Data Page
+               m_rx_input_pin_state = p_message->ANT_MESSAGE_aucPayload[7];
+               set_led_state();
+           }
+           break;
+
+        case EVENT_TRANSFER_TX_COMPLETED:
+        case EVENT_TRANSFER_TX_FAILED:
+          // Transmit data on the reverse direction every channel period
+          handle_transmit();
+          break;
+
+        default:
+          break;
+    }
+}
+
+
+NRF_SDH_ANT_OBSERVER(m_ant_observer, 1, ant_freq_ag_event_handler, NULL);
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/ant_frequency_agility_tx.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/ant_frequency_agility_tx.eww
new file mode 100644
index 0000000..a3867d2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/ant_frequency_agility_tx.eww
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>  <project>
+    <path>$WS_DIR$\pca10040\s212\iar\ant_frequency_agility_tx_pca10040_s212.ewp</path>
+  </project>  <project>
+    <path>$WS_DIR$\d52_starterkit\s212\iar\ant_frequency_agility_tx_d52_starterkit_s212.ewp</path>
+  </project>  <batchBuild/>
+</workspace>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/ant_frequency_agility_tx.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/ant_frequency_agility_tx.h
new file mode 100644
index 0000000..f038b75
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/ant_frequency_agility_tx.h
@@ -0,0 +1,64 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+
+
+#ifndef ANT_FA_TX_H__
+#define ANT_FA_TX_H__
+
+
+/**@brief Function for configuring and opening master channel.
+ *
+ */
+void ant_freq_ag_setup(void);
+
+
+#endif  // ANT_IO_RX_H__
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/ant_frequency_agility_tx_test.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/ant_frequency_agility_tx_test.xml
new file mode 100644
index 0000000..6a08682
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/ant_frequency_agility_tx_test.xml
@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SingleDeviceProfile>
+  <!--ANTWare_II Single Device Profile - Created:2017-02-21 12:43:27-->
+  <DeviceProfile>
+    <DeviceInfo>
+      <NumChannels>8</NumChannels>
+    </DeviceInfo>
+    <DeviceSetup />
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Slave_Receive_0x00</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">ADV_FrequencyAgility_0x04</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">0</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">3</deviceType>
+      <transmissionType type="System.Byte">5</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">34</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">35</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">36</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">37</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">38</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">39</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+    <ChannelProfile>
+      <channelType type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelType">BASE_Master_Transmit_0x10</channelType>
+      <channelTypeExt type="ANT_Managed_Library.ANT_ReferenceLibrary+ChannelTypeExtended">0</channelTypeExt>
+      <networkNum type="System.Byte">0</networkNum>
+      <deviceNumber type="System.UInt16">40</deviceNumber>
+      <pairingOn type="System.Boolean">false</pairingOn>
+      <deviceType type="System.Byte">1</deviceType>
+      <transmissionType type="System.Byte">1</transmissionType>
+      <msgPeriod type="System.UInt16">8192</msgPeriod>
+      <radioFreq type="System.Byte">66</radioFreq>
+      <chTxPower type="ANT_Managed_Library.ANT_ReferenceLibrary+TransmitPower">RADIO_TX_POWER_0DB_0x03</chTxPower>
+      <searchTimeout type="System.Byte">10</searchTimeout>
+      <lowPriSearchTimeout type="System.Byte">2</lowPriSearchTimeout>
+    </ChannelProfile>
+  </DeviceProfile>
+</SingleDeviceProfile>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/arm4/ant_frequency_agility_tx_d52_starterkit_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/arm4/ant_frequency_agility_tx_d52_starterkit_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/arm4/ant_frequency_agility_tx_d52_starterkit_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/arm4/ant_frequency_agility_tx_d52_starterkit_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/arm4/ant_frequency_agility_tx_d52_starterkit_s212.uvproj
new file mode 100644
index 0000000..da97cff
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/arm4/ant_frequency_agility_tx_d52_starterkit_s212.uvproj
@@ -0,0 +1,563 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_frequency_agility_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_frequency_agility_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath>            </File>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_power_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/arm5_no_packs/ant_frequency_agility_tx_d52_starterkit_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/arm5_no_packs/ant_frequency_agility_tx_d52_starterkit_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/arm5_no_packs/ant_frequency_agility_tx_d52_starterkit_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/arm5_no_packs/ant_frequency_agility_tx_d52_starterkit_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/arm5_no_packs/ant_frequency_agility_tx_d52_starterkit_s212.uvprojx
new file mode 100644
index 0000000..02f3668
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/arm5_no_packs/ant_frequency_agility_tx_d52_starterkit_s212.uvprojx
@@ -0,0 +1,587 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_D52DK1,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_D52DK1 FLOAT_ABI_HARD NRF52 NRF52832_XXAA S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_frequency_agility_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_frequency_agility_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath>            </File>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_power_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/armgcc/Makefile
new file mode 100644
index 0000000..8267e41
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/armgcc/Makefile
@@ -0,0 +1,188 @@
+PROJECT_NAME     := ant_frequency_agility_tx_d52_starterkit_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_frequency_agility_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_clock.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_clock.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_power_clock.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_frequency_agility_tx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  ../config \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/timer \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_D52DK1
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_D52DK1
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/armgcc/ant_frequency_agility_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/armgcc/ant_frequency_agility_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..7e654a4
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/armgcc/ant_frequency_agility_tx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/config/sdk_config.h
new file mode 100644
index 0000000..e0844c3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/config/sdk_config.h
@@ -0,0 +1,3953 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 5
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQUENCY_A - RF Frequency. 
+#ifndef RF_FREQUENCY_A
+#define RF_FREQUENCY_A 3
+#endif
+
+// <o> RF_FREQUENCY_B - RF Frequency. 
+#ifndef RF_FREQUENCY_B
+#define RF_FREQUENCY_B 39
+#endif
+
+// <o> RF_FREQUENCY_C - RF Frequency. 
+#ifndef RF_FREQUENCY_C
+#define RF_FREQUENCY_C 75
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer
+//==========================================================
+#ifndef CLOCK_ENABLED
+#define CLOCK_ENABLED 1
+#endif
+// <o> CLOCK_CONFIG_LF_SRC  - LF Clock Source
+ 
+// <0=> RC 
+// <1=> XTAL 
+// <2=> Synth 
+
+#ifndef CLOCK_CONFIG_LF_SRC
+#define CLOCK_CONFIG_LF_SRC 1
+#endif
+
+// <o> CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef CLOCK_CONFIG_IRQ_PRIORITY
+#define CLOCK_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
+//==========================================================
+#ifndef NRFX_CLOCK_ENABLED
+#define NRFX_CLOCK_ENABLED 1
+#endif
+// <o> NRFX_CLOCK_CONFIG_LF_SRC  - LF Clock Source
+ 
+// <0=> RC 
+// <1=> XTAL 
+// <2=> Synth 
+
+#ifndef NRFX_CLOCK_CONFIG_LF_SRC
+#define NRFX_CLOCK_CONFIG_LF_SRC 1
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY
+#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED
+#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL
+#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR
+#define NRFX_CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR
+#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 31
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/iar/ant_frequency_agility_tx_d52_starterkit_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/iar/ant_frequency_agility_tx_d52_starterkit_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/iar/ant_frequency_agility_tx_d52_starterkit_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/iar/ant_frequency_agility_tx_d52_starterkit_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/iar/ant_frequency_agility_tx_d52_starterkit_s212.ewp
new file mode 100644
index 0000000..59b71c7
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/iar/ant_frequency_agility_tx_d52_starterkit_s212.ewp
@@ -0,0 +1,1079 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_D52DK1</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_frequency_agility_tx_d52_starterkit_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_frequency_agility_tx_d52_starterkit_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_frequency_agility_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_frequency_agility_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/iar/ant_frequency_agility_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/iar/ant_frequency_agility_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/iar/ant_frequency_agility_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/ses/ant_frequency_agility_tx_d52_starterkit_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/ses/ant_frequency_agility_tx_d52_starterkit_s212.emProject
new file mode 100644
index 0000000..a719644
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/ses/ant_frequency_agility_tx_d52_starterkit_s212.emProject
@@ -0,0 +1,110 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_frequency_agility_tx_d52_starterkit_s212" target="8" version="2">
+  <project Name="ant_frequency_agility_tx_d52_starterkit_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_search_config;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_D52DK1;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_clock.c" />
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_clock.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_power_clock.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_frequency_agility_tx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/ses/ant_frequency_agility_tx_d52_starterkit_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/ses/ant_frequency_agility_tx_d52_starterkit_s212.emSession
new file mode 100644
index 0000000..20dc9bf
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/ses/ant_frequency_agility_tx_d52_starterkit_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_frequency_agility_tx_d52_starterkit_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..7b73f5c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/d52_starterkit/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/main.c
new file mode 100644
index 0000000..9e1258e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/main.c
@@ -0,0 +1,130 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+
+#include <stdint.h>
+#include "nrf.h"
+#include "nrf_soc.h"
+#include "app_error.h"
+#include "app_timer.h"
+#include "bsp.h"
+#include "hardfault.h"
+#include "nrf_sdh.h"
+#include "nrf_sdh_ant.h"
+#include "ant_frequency_agility_tx.h"
+
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+
+#define APP_TIMER_PRESCALER             0                    /**< Value of the RTC1 PRESCALER register. */
+#define APP_TIMER_OP_QUEUE_SIZE         2u                   /**< Size of timer operation queues. */
+
+
+/**@brief Function for the Timer and BSP initialization.
+ */
+static void utils_setup(void)
+{
+    uint32_t err_code;
+
+    err_code = app_timer_init();
+    APP_ERROR_CHECK(err_code);
+
+    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS, NULL);
+    APP_ERROR_CHECK(err_code);
+}
+
+
+/**
+ *@brief Function for initializing logging.
+ */
+static void log_init(void)
+{
+    ret_code_t err_code = NRF_LOG_INIT(NULL);
+    APP_ERROR_CHECK(err_code);
+
+    NRF_LOG_DEFAULT_BACKENDS_INIT();
+}
+
+
+/**@brief Function for application main entry. Does not return.
+ */
+int main(void)
+{
+    log_init();
+    utils_setup();
+
+    ret_code_t err_code = nrf_sdh_enable_request();
+    APP_ERROR_CHECK(err_code);
+
+    ASSERT(nrf_sdh_is_enabled());
+
+    err_code = nrf_sdh_ant_enable();
+    APP_ERROR_CHECK(err_code);
+
+    // Setup and start ANT channel
+    ant_freq_ag_setup();
+
+    NRF_LOG_INFO("ANT Frequency Agility TX example started.");
+
+    // Enter main loop.
+    for (;;)
+    {
+        NRF_LOG_FLUSH();
+
+        err_code = sd_app_evt_wait();
+        APP_ERROR_CHECK(err_code);
+    }
+}
+
+
+/**
+ *@}
+ **/
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/arm4/ant_frequency_agility_tx_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/arm4/ant_frequency_agility_tx_pca10040_s212.uvopt
new file mode 100644
index 0000000..1223a32
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/arm4/ant_frequency_agility_tx_pca10040_s212.uvopt
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>      <OPTFL>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>      <DebugOpt>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+  <TargetDriverDllRegistry>
+       <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/arm4/ant_frequency_agility_tx_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/arm4/ant_frequency_agility_tx_pca10040_s212.uvproj
new file mode 100644
index 0000000..ad81e41
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/arm4/ant_frequency_agility_tx_pca10040_s212.uvproj
@@ -0,0 +1,563 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>core.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>5</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls>--c99 --reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>None</GroupName>
+          <Files>            <File>
+              <FileName>arm_startup_nrf52.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath>            </File>            <File>
+              <FileName>system_nrf52.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_frequency_agility_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_frequency_agility_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath>            </File>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_power_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets>
+
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/arm5_no_packs/ant_frequency_agility_tx_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/arm5_no_packs/ant_frequency_agility_tx_pca10040_s212.uvoptx
new file mode 100644
index 0000000..7ccb08c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/arm5_no_packs/ant_frequency_agility_tx_pca10040_s212.uvoptx
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Target>
+    <TargetName>nrf52832_xxaa</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\_build\</ListingPath>
+      </OPTLEX>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>7</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target></ProjectOpt>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/arm5_no_packs/ant_frequency_agility_tx_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/arm5_no_packs/ant_frequency_agility_tx_pca10040_s212.uvprojx
new file mode 100644
index 0000000..1bc71ac
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/arm5_no_packs/ant_frequency_agility_tx_pca10040_s212.uvprojx
@@ -0,0 +1,587 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>    <Target>
+      <TargetName>nrf52832_xxaa</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>          <Device>nRF52832_xxAA</Device>
+          <Vendor>Nordic Semiconductor</Vendor>
+          <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID>
+          <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>          <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\_build\</OutputDirectory>
+          <OutputName>nrf52832_xxaa</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\_build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName></SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll></SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>            <UsePdscDebugDescription>1</UsePdscDebugDescription>          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x12000</StartAddress>
+                <Size>0x6e000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000b80</StartAddress>
+                <Size>0xf480</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <VariousControls>
+              <MiscControls>--reduce_paths</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls> --cpreproc_opts=-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls>
+              <Define> BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\..\components\ant\ant_channel_config;..\..\..\..\..\..\..\..\components\ant\ant_search_config;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\hardfault;..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52;..\..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc>--diag_suppress 6330</Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>        <Group>
+          <GroupName>Application</GroupName>
+          <Files>            <File>
+              <FileName>ant_frequency_agility_tx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\ant_frequency_agility_tx.c</FilePath>            </File>            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\main.c</FilePath>            </File>            <File>
+              <FileName>sdk_config.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\config\sdk_config.h</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Definition</GroupName>
+          <Files>            <File>
+              <FileName>boards.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>Board Support</GroupName>
+          <Files>            <File>
+              <FileName>bsp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_ANT</GroupName>
+          <Files>            <File>
+              <FileName>ant_channel_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</FilePath>            </File>            <File>
+              <FileName>ant_search_config.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Drivers</GroupName>
+          <Files>            <File>
+              <FileName>nrf_drv_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath>            </File>            <File>
+              <FileName>nrf_drv_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_gpiote.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath>            </File>            <File>
+              <FileName>nrfx_power_clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath>            </File>            <File>
+              <FileName>nrfx_prs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</FilePath>            </File>            <File>
+              <FileName>nrfx_uarte.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Libraries</GroupName>
+          <Files>            <File>
+              <FileName>app_button.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath>            </File>            <File>
+              <FileName>app_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath>            </File>            <File>
+              <FileName>app_error_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>app_error_weak.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath>            </File>            <File>
+              <FileName>app_scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath>            </File>            <File>
+              <FileName>app_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath>            </File>            <File>
+              <FileName>app_util_platform.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath>            </File>            <File>
+              <FileName>hardfault_handler_keil.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_keil.c</FilePath>            </File>            <File>
+              <FileName>hardfault_implementation.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</FilePath>            </File>            <File>
+              <FileName>nrf_assert.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath>            </File>            <File>
+              <FileName>nrf_atomic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath>            </File>            <File>
+              <FileName>nrf_balloc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath>            </File>            <File>
+              <FileName>nrf_fprintf_format.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath>            </File>            <File>
+              <FileName>nrf_memobj.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath>            </File>            <File>
+              <FileName>nrf_section_iter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath>            </File>            <File>
+              <FileName>nrf_strerror.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Log</GroupName>
+          <Files>            <File>
+              <FileName>nrf_log_backend_rtt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_backend_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_default_backends.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_frontend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath>            </File>            <File>
+              <FileName>nrf_log_str_formatter.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_Segger_RTT</GroupName>
+          <Files>            <File>
+              <FileName>SEGGER_RTT.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath>            </File>            <File>
+              <FileName>SEGGER_RTT_printf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath>            </File>          </Files>
+        </Group>        <Group>
+          <GroupName>nRF_SoftDevice</GroupName>
+          <Files>            <File>
+              <FileName>nrf_sdh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_ant.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath>            </File>            <File>
+              <FileName>nrf_sdh_soc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath>            </File>          </Files>
+        </Group>      </Groups>
+    </Target>  </Targets><RTE>
+  <packages>
+    <filter>
+      <targetInfos/>
+    </filter>    <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>
+    <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0">
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </package>  </packages>
+  <apis/>
+  <components>    <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+      <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>
+    <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device">
+      <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/>
+      <targetInfos>        <targetInfo name="nrf52832_xxaa" versionMatchMode="fixed"/>      </targetInfos>
+    </component>  </components>
+  <files>  </files>
+</RTE>
+</Project>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/armgcc/Makefile
new file mode 100644
index 0000000..b388395
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/armgcc/Makefile
@@ -0,0 +1,192 @@
+PROJECT_NAME     := ant_frequency_agility_tx_pca10040_s212
+TARGETS          := nrf52832_xxaa
+OUTPUT_DIRECTORY := _build
+
+SDK_ROOT := ../../../../../../../..
+PROJ_DIR := ../../..
+
+$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
+  LINKER_SCRIPT  := ant_frequency_agility_tx_gcc_nrf52.ld
+
+# Source files common to all targets
+SRC_FILES += \
+  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
+  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
+  $(SDK_ROOT)/components/boards/boards.c \
+  $(SDK_ROOT)/components/libraries/button/app_button.c \
+  $(SDK_ROOT)/components/libraries/util/app_error.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
+  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
+  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
+  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c \
+  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
+  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
+  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
+  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
+  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
+  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
+  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_clock.c \
+  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_clock.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_power_clock.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
+  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
+  $(SDK_ROOT)/components/ant/ant_channel_config/ant_channel_config.c \
+  $(SDK_ROOT)/components/ant/ant_search_config/ant_search_config.c \
+  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
+  $(PROJ_DIR)/ant_frequency_agility_tx.c \
+  $(PROJ_DIR)/main.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \
+  $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \
+  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \
+  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
+
+# Include folders common to all targets
+INC_FOLDERS += \
+  $(SDK_ROOT)/external/fprintf \
+  $(SDK_ROOT)/components/libraries/hardfault/nrf52 \
+  $(SDK_ROOT)/integration/nrfx \
+  $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \
+  $(SDK_ROOT)/components/libraries/scheduler \
+  ../config \
+  $(SDK_ROOT)/components/libraries/experimental_section_vars \
+  $(SDK_ROOT)/modules/nrfx/mdk \
+  $(SDK_ROOT)/components/libraries/strerror \
+  $(SDK_ROOT)/components/boards \
+  $(SDK_ROOT)/components/libraries/experimental_memobj \
+  $(SDK_ROOT)/components/softdevice/s212/headers \
+  $(SDK_ROOT)/components/libraries/button \
+  $(SDK_ROOT)/modules/nrfx/hal \
+  $(SDK_ROOT)/components/libraries/bsp \
+  $(SDK_ROOT)/modules/nrfx/drivers/include \
+  $(SDK_ROOT)/components/ant/ant_channel_config \
+  $(SDK_ROOT)/components/libraries/hardfault \
+  $(SDK_ROOT)/components/libraries/balloc \
+  $(SDK_ROOT)/components/libraries/util \
+  $(SDK_ROOT)/modules/nrfx \
+  $(SDK_ROOT)/components/softdevice/common \
+  $(SDK_ROOT)/components \
+  $(SDK_ROOT)/external/segger_rtt \
+  $(SDK_ROOT)/integration/nrfx/legacy \
+  $(SDK_ROOT)/components/libraries/experimental_log \
+  $(SDK_ROOT)/components/ant/ant_search_config \
+  $(SDK_ROOT)/components/libraries/experimental_log/src \
+  $(SDK_ROOT)/components/libraries/atomic \
+  $(SDK_ROOT)/components/libraries/delay \
+  $(SDK_ROOT)/components/toolchain/cmsis/include \
+  $(SDK_ROOT)/components/libraries/timer \
+
+# Libraries common to all targets
+LIB_FILES += \
+
+# Optimization flags
+OPT = -O3 -g3
+# Uncomment the line below to enable link time optimization
+#OPT += -flto
+
+# C flags common to all targets
+CFLAGS += $(OPT)
+CFLAGS += -DBOARD_PCA10040
+CFLAGS += -DCONFIG_GPIO_AS_PINRESET
+CFLAGS += -DFLOAT_ABI_HARD
+CFLAGS += -DNRF52
+CFLAGS += -DNRF52832_XXAA
+CFLAGS += -DNRF52_PAN_74
+CFLAGS += -DS212
+CFLAGS += -DSOFTDEVICE_PRESENT
+CFLAGS += -DSWI_DISABLE0
+CFLAGS += -mcpu=cortex-m4
+CFLAGS += -mthumb -mabi=aapcs
+CFLAGS += -Wall -Werror
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# keep every function in a separate section, this allows linker to discard unused ones
+CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
+CFLAGS += -fno-builtin -fshort-enums
+
+# C++ flags common to all targets
+CXXFLAGS += $(OPT)
+
+# Assembler flags common to all targets
+ASMFLAGS += -g3
+ASMFLAGS += -mcpu=cortex-m4
+ASMFLAGS += -mthumb -mabi=aapcs
+ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+ASMFLAGS += -DBOARD_PCA10040
+ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
+ASMFLAGS += -DFLOAT_ABI_HARD
+ASMFLAGS += -DNRF52
+ASMFLAGS += -DNRF52832_XXAA
+ASMFLAGS += -DNRF52_PAN_74
+ASMFLAGS += -DS212
+ASMFLAGS += -DSOFTDEVICE_PRESENT
+ASMFLAGS += -DSWI_DISABLE0
+
+# Linker flags
+LDFLAGS += $(OPT)
+LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
+LDFLAGS += -mcpu=cortex-m4
+LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+# let linker dump unused sections
+LDFLAGS += -Wl,--gc-sections
+# use newlib in nano version
+LDFLAGS += --specs=nano.specs
+
+nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192
+nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192
+
+# Add standard libraries at the very end of the linker input, after all objects
+# that may need symbols provided by these libraries.
+LIB_FILES += -lc -lnosys -lm
+
+
+.PHONY: default help
+
+# Default target - first one defined
+default: nrf52832_xxaa
+
+# Print all targets that can be built
+help:
+	@echo following targets are available:
+	@echo		nrf52832_xxaa
+	@echo		sdk_config - starting external tool for editing sdk_config.h
+	@echo		flash      - flashing binary
+
+TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc
+
+
+include $(TEMPLATE_PATH)/Makefile.common
+
+$(foreach target, $(TARGETS), $(call define_target, $(target)))
+
+.PHONY: flash erase
+
+# Flash the program
+flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
+	@echo Flashing: $<
+	nrfjprog -f nrf52 --program $< --sectorerase
+	nrfjprog -f nrf52 --reset
+
+erase:
+	nrfjprog -f nrf52 --eraseall
+
+SDK_CONFIG_FILE := ../config/sdk_config.h
+CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
+sdk_config:
+	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/armgcc/ant_frequency_agility_tx_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/armgcc/ant_frequency_agility_tx_gcc_nrf52.ld
new file mode 100644
index 0000000..54ab60a
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/armgcc/ant_frequency_agility_tx_gcc_nrf52.ld
@@ -0,0 +1,81 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x12000, LENGTH = 0x6e000
+  RAM (rwx) :  ORIGIN = 0x20000b80, LENGTH = 0xf480
+}
+
+SECTIONS
+{
+}
+
+SECTIONS
+{
+  . = ALIGN(4);
+  .mem_section_dummy_ram :
+  {
+  }
+  .log_dynamic_data :
+  {
+    PROVIDE(__start_log_dynamic_data = .);
+    KEEP(*(SORT(.log_dynamic_data*)))
+    PROVIDE(__stop_log_dynamic_data = .);
+  } > RAM
+
+} INSERT AFTER .data;
+
+SECTIONS
+{
+  .mem_section_dummy_rom :
+  {
+  }
+  .sdh_ant_observers :
+  {
+    PROVIDE(__start_sdh_ant_observers = .);
+    KEEP(*(SORT(.sdh_ant_observers*)))
+    PROVIDE(__stop_sdh_ant_observers = .);
+  } > FLASH
+  .sdh_soc_observers :
+  {
+    PROVIDE(__start_sdh_soc_observers = .);
+    KEEP(*(SORT(.sdh_soc_observers*)))
+    PROVIDE(__stop_sdh_soc_observers = .);
+  } > FLASH
+  .log_const_data :
+  {
+    PROVIDE(__start_log_const_data = .);
+    KEEP(*(SORT(.log_const_data*)))
+    PROVIDE(__stop_log_const_data = .);
+  } > FLASH
+    .nrf_balloc :
+  {
+    PROVIDE(__start_nrf_balloc = .);
+    KEEP(*(.nrf_balloc))
+    PROVIDE(__stop_nrf_balloc = .);
+  } > FLASH
+  .sdh_state_observers :
+  {
+    PROVIDE(__start_sdh_state_observers = .);
+    KEEP(*(SORT(.sdh_state_observers*)))
+    PROVIDE(__stop_sdh_state_observers = .);
+  } > FLASH
+  .sdh_stack_observers :
+  {
+    PROVIDE(__start_sdh_stack_observers = .);
+    KEEP(*(SORT(.sdh_stack_observers*)))
+    PROVIDE(__stop_sdh_stack_observers = .);
+  } > FLASH
+  .sdh_req_observers :
+  {
+    PROVIDE(__start_sdh_req_observers = .);
+    KEEP(*(SORT(.sdh_req_observers*)))
+    PROVIDE(__stop_sdh_req_observers = .);
+  } > FLASH
+
+} INSERT AFTER .text
+
+INCLUDE "nrf_common.ld"
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/config/sdk_config.h
new file mode 100644
index 0000000..34ffc74
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/config/sdk_config.h
@@ -0,0 +1,3953 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> Application 
+
+//==========================================================
+// <o> CHAN_ID_DEV_TYPE - Channel ID: Device Type. 
+#ifndef CHAN_ID_DEV_TYPE
+#define CHAN_ID_DEV_TYPE 3
+#endif
+
+// <o> CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. 
+#ifndef CHAN_ID_TRANS_TYPE
+#define CHAN_ID_TRANS_TYPE 5
+#endif
+
+// <o> CHAN_PERIOD - Channel Period (in 32 kHz counts). 
+#ifndef CHAN_PERIOD
+#define CHAN_PERIOD 8192
+#endif
+
+// <o> RF_FREQUENCY_A - RF Frequency. 
+#ifndef RF_FREQUENCY_A
+#define RF_FREQUENCY_A 3
+#endif
+
+// <o> RF_FREQUENCY_B - RF Frequency. 
+#ifndef RF_FREQUENCY_B
+#define RF_FREQUENCY_B 39
+#endif
+
+// <o> RF_FREQUENCY_C - RF Frequency. 
+#ifndef RF_FREQUENCY_C
+#define RF_FREQUENCY_C 75
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_ANT 
+
+//==========================================================
+// <q> ANT_CHANNEL_CONFIG_ENABLED  - ant_channel_config - ANT common channel configuration
+ 
+
+#ifndef ANT_CHANNEL_CONFIG_ENABLED
+#define ANT_CHANNEL_CONFIG_ENABLED 1
+#endif
+
+// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
+//==========================================================
+#ifndef ANT_SEARCH_CONFIG_ENABLED
+#define ANT_SEARCH_CONFIG_ENABLED 1
+#endif
+// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
+#endif
+
+// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out.  <0-255> 
+
+
+#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
+#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer
+//==========================================================
+#ifndef CLOCK_ENABLED
+#define CLOCK_ENABLED 1
+#endif
+// <o> CLOCK_CONFIG_LF_SRC  - LF Clock Source
+ 
+// <0=> RC 
+// <1=> XTAL 
+// <2=> Synth 
+
+#ifndef CLOCK_CONFIG_LF_SRC
+#define CLOCK_CONFIG_LF_SRC 1
+#endif
+
+// <o> CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef CLOCK_CONFIG_IRQ_PRIORITY
+#define CLOCK_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
+//==========================================================
+#ifndef GPIOTE_ENABLED
+#define GPIOTE_ENABLED 1
+#endif
+// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
+#endif
+
+// <o> GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
+#define GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// </e>
+
+// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
+//==========================================================
+#ifndef NRFX_CLOCK_ENABLED
+#define NRFX_CLOCK_ENABLED 1
+#endif
+// <o> NRFX_CLOCK_CONFIG_LF_SRC  - LF Clock Source
+ 
+// <0=> RC 
+// <1=> XTAL 
+// <2=> Synth 
+
+#ifndef NRFX_CLOCK_CONFIG_LF_SRC
+#define NRFX_CLOCK_CONFIG_LF_SRC 1
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY
+#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED
+#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL
+#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR
+#define NRFX_CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR
+#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
+//==========================================================
+#ifndef NRFX_GPIOTE_ENABLED
+#define NRFX_GPIOTE_ENABLED 1
+#endif
+// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins 
+#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
+#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
+#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
+#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
+#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
+#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 1
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
+//==========================================================
+#ifndef APP_TIMER_ENABLED
+#define APP_TIMER_ENABLED 1
+#endif
+// <o> APP_TIMER_CONFIG_RTC_FREQUENCY  - Configure RTC prescaler.
+ 
+// <0=> 32768 Hz 
+// <1=> 16384 Hz 
+// <3=> 8192 Hz 
+// <7=> 4096 Hz 
+// <15=> 2048 Hz 
+// <31=> 1024 Hz 
+
+#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
+#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
+#endif
+
+// <o> APP_TIMER_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
+#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. 
+// <i> Size of the queue depends on how many timers are used
+// <i> in the system, how often timers are started and overall
+// <i> system latency. If queue size is too small app_timer calls
+// <i> will fail.
+
+#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
+#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
+#endif
+
+// <q> APP_TIMER_CONFIG_USE_SCHEDULER  - Enable scheduling app_timer events to app_scheduler
+ 
+
+#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
+#define APP_TIMER_CONFIG_USE_SCHEDULER 0
+#endif
+
+// <q> APP_TIMER_KEEPS_RTC_ACTIVE  - Enable RTC always on
+ 
+
+// <i> If option is enabled RTC is kept running even if there is no active timers.
+// <i> This option can be used when app_timer is used for timestamping.
+
+#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
+#define APP_TIMER_KEEPS_RTC_ACTIVE 0
+#endif
+
+// <h> App Timer Legacy configuration - Legacy configuration.
+
+//==========================================================
+// <q> APP_TIMER_WITH_PROFILER  - Enable app_timer profiling
+ 
+
+#ifndef APP_TIMER_WITH_PROFILER
+#define APP_TIMER_WITH_PROFILER 0
+#endif
+
+// <q> APP_TIMER_CONFIG_SWI_NUMBER  - Configure SWI instance used.
+ 
+
+#ifndef APP_TIMER_CONFIG_SWI_NUMBER
+#define APP_TIMER_CONFIG_SWI_NUMBER 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
+//==========================================================
+#ifndef HARDFAULT_HANDLER_ENABLED
+#define HARDFAULT_HANDLER_ENABLED 1
+#endif
+// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE  - Bypass the GDB problem with multiple stack pointers backtrace
+ 
+
+// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
+// <i> when multiple stack pointers are used (main and process stack pointers).
+// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
+// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
+// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
+// <i> This is an optional parameter - enable it while debugging.
+// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
+
+#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
+#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <q> NRF_FPRINTF_ENABLED  - nrf_fprintf - fprintf function.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <q> NRF_SECTION_ITER_ENABLED  - nrf_section_iter - Section iterator
+ 
+
+#ifndef NRF_SECTION_ITER_ENABLED
+#define NRF_SECTION_ITER_ENABLED 1
+#endif
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <h> app_button - buttons handling module
+
+//==========================================================
+// <q> BUTTON_ENABLED  - Enables Button module
+ 
+
+#ifndef BUTTON_ENABLED
+#define BUTTON_ENABLED 1
+#endif
+
+// <q> BUTTON_HIGH_ACCURACY_ENABLED  - Enables GPIOTE high accuracy for buttons
+ 
+
+#ifndef BUTTON_HIGH_ACCURACY_ENABLED
+#define BUTTON_HIGH_ACCURACY_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// <h> nrf_log - Logger
+
+//==========================================================
+// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 3
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 1024
+#endif
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768
+#endif
+
+// </e>
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_CONFIG_LOG_ENABLED
+#define NRF_MPU_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_CONFIG_LOG_LEVEL
+#define NRF_MPU_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_INFO_COLOR
+#define NRF_MPU_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
+#define NRF_MPU_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 1
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_SoftDevice 
+
+//==========================================================
+// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
+//==========================================================
+#ifndef NRF_SDH_ANT_ENABLED
+#define NRF_SDH_ANT_ENABLED 1
+#endif
+// <h> ANT Channels 
+
+//==========================================================
+// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. 
+#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
+#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1
+#endif
+
+// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. 
+#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
+#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Queues 
+
+//==========================================================
+// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. 
+#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
+#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
+#endif
+
+// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. 
+#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
+#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> ANT Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. 
+// <i> This setting configures the number of priority levels available for the ANT event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> ANT Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> ANT_BPWR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
+
+#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
+#define ANT_BPWR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_BSC_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
+
+#ifndef ANT_BSC_ANT_OBSERVER_PRIO
+#define ANT_BSC_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
+
+#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
+#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_HRM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
+
+#ifndef ANT_HRM_ANT_OBSERVER_PRIO
+#define ANT_HRM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_SDM_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
+
+#ifndef ANT_SDM_ANT_OBSERVER_PRIO
+#define ANT_SDM_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
+
+#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
+#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
+#endif
+
+// <o> BSP_BTN_ANT_OBSERVER_PRIO  
+// <i> Priority with which ANT events are dispatched to the Button Control module.
+
+#ifndef BSP_BTN_ANT_OBSERVER_PRIO
+#define BSP_BTN_ANT_OBSERVER_PRIO 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
+//==========================================================
+#ifndef NRF_SDH_ENABLED
+#define NRF_SDH_ENABLED 1
+#endif
+// <h> Dispatch model 
+
+// <i> This setting configures how Stack events are dispatched to the application.
+//==========================================================
+// <o> NRF_SDH_DISPATCH_MODEL
+ 
+
+// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
+// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
+// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
+// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT 
+// <1=> NRF_SDH_DISPATCH_MODEL_APPSH 
+// <2=> NRF_SDH_DISPATCH_MODEL_POLLING 
+
+#ifndef NRF_SDH_DISPATCH_MODEL
+#define NRF_SDH_DISPATCH_MODEL 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Clock - SoftDevice clock configuration
+
+//==========================================================
+// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
+ 
+// <0=> NRF_CLOCK_LF_SRC_RC 
+// <1=> NRF_CLOCK_LF_SRC_XTAL 
+// <2=> NRF_CLOCK_LF_SRC_SYNTH 
+
+#ifndef NRF_SDH_CLOCK_LF_SRC
+#define NRF_SDH_CLOCK_LF_SRC 1
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
+#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
+#define NRF_SDH_CLOCK_LF_RC_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
+// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
+// <i>  if the temperature has not changed.
+
+#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
+#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
+#endif
+
+// <o> NRF_SDH_CLOCK_LF_ACCURACY  - External clock accuracy used in the LL to compute timing.
+ 
+// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM 
+// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM 
+// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM 
+// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM 
+// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM 
+// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM 
+// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM 
+// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM 
+// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM 
+// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM 
+// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM 
+// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM 
+
+#ifndef NRF_SDH_CLOCK_LF_ACCURACY
+#define NRF_SDH_CLOCK_LF_ACCURACY 7
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> SDH Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. 
+// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
+#endif
+
+
+// <h> State Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
+#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
+#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// <o> RNG_CONFIG_STATE_OBSERVER_PRIO  
+// <i> Priority with which state events are dispatched to this module.
+
+#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
+#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Stack Event Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
+#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
+#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
+#endif
+
+// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO  
+// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
+// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
+// <i> Zero is the highest priority.
+
+#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
+#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
+//==========================================================
+#ifndef NRF_SDH_SOC_ENABLED
+#define NRF_SDH_SOC_ENABLED 1
+#endif
+// <h> SoC Observers - Observers and priority levels
+
+//==========================================================
+// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. 
+// <i> This setting configures the number of priority levels available for the SoC event handlers.
+// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
+
+#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
+#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
+#endif
+
+// <h> SoC Observers priorities - Invididual priorities
+
+//==========================================================
+// <o> BLE_ADV_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Advertising module.
+
+#ifndef BLE_ADV_SOC_OBSERVER_PRIO
+#define BLE_ADV_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> BLE_DFU_SOC_OBSERVER_PRIO  
+// <i> Priority with which BLE events are dispatched to the DFU Service.
+
+#ifndef BLE_DFU_SOC_OBSERVER_PRIO
+#define BLE_DFU_SOC_OBSERVER_PRIO 1
+#endif
+
+// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Clock driver.
+
+#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
+#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// <o> POWER_CONFIG_SOC_OBSERVER_PRIO  
+// <i> Priority with which SoC events are dispatched to the Power driver.
+
+#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
+#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/iar/ant_frequency_agility_tx_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/iar/ant_frequency_agility_tx_iar_nRF5x.icf
new file mode 100644
index 0000000..3655d04
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/iar/ant_frequency_agility_tx_iar_nRF5x.icf
@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x12000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x12000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x7ffff;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000b80;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000ffff;
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 8192;
+define symbol __ICFEDIT_size_heap__     = 8192;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+define block RO_END    with alignment = 8, size = 0     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region   { readonly,
+                        block RO_END };
+place in RAM_region   { readwrite,
+                        block CSTACK,
+                        block HEAP };
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/iar/ant_frequency_agility_tx_pca10040_s212.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/iar/ant_frequency_agility_tx_pca10040_s212.ewd
new file mode 100644
index 0000000..2dfe98b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/iar/ant_frequency_agility_tx_pca10040_s212.ewd
@@ -0,0 +1,1350 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>26</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52832_xxaa.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state>--drv_vector_table_base=0x0</state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV3</name>
+          <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52832_xxaa.board</state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OverrideDefFlashBoard</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCImagesUse3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDeviceConfigMacroFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDebuggerExtraOption</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCAllMTBOptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreNrOfCores</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCMulticoreMaster</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCMulticorePort</name>
+          <state>53461</state>
+        </option>
+        <option>
+          <name>OCMulticoreWorkspace</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveProject</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCMulticoreSlaveConfiguration</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CMSISDAP_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CMSISDAPResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>CMSISDAPHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>CMSISDAPDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CMSISDAPProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CMSISDAPSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IJET_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCIarProbeScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetResetList</name>
+          <version>1</version>
+          <state>10</state>
+        </option>
+        <option>
+          <name>IjetHWResetDuration</name>
+          <state>300</state>
+        </option>
+        <option>
+          <name>IjetHWResetDelay</name>
+          <state>200</state>
+        </option>
+        <option>
+          <name>IjetPowerFromProbe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IjetPowerRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>IjetInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTargetEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetJtagSpeedList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetProtocolRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSwoPin</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>IjetSwoPrescalerList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetRestoreBreakpointsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetUpdateBreakpointsEdit</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>RDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchUndef</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchData</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchPrefetch</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>RDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CatchMMERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchNOCPERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchCHKERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchSTATERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchBUSERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchINTERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchHARDERR</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeCfgOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProbeConfig</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IjetProbeConfigRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetMultiCPUNumber</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IjetSelectedCPUBehaviour</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ICpuName</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCJetEmuParams</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>15</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>1000</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>6</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCORERESET</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchMMERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchNOCPERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchCHRERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchSTATERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchBUSERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchINTERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchHARDERR</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCatchDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkScriptFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkUsbSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCTcpIpAlt</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTcpIpSerialNo</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkTraceSourceDummy</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkDeviceName</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiFtdiInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>_call_main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>PEMICRO_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCPEMicroAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroInterfaceList</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPEMicroJtagSpeed</name>
+          <state>#UNINITIALIZED#</state>
+        </option>
+        <option>
+          <name>CCJPEMicroShowSettings</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCPEMicroUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPEMicroSerialPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJPEMicroTCPIPAutoScanNetwork</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCPEMicroTCPIP</name>
+          <state>10.0.0.1</state>
+        </option>
+        <option>
+          <name>CCPEMicroCommCmdLineProducer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSTLinkResetList</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCpuClockEdit</name>
+          <state>72.0</state>
+        </option>
+        <option>
+          <name>CCSwoClockAuto</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSwoClockEdit</name>
+          <state>2000</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>XDS100_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>2</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCXDS100AttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TIPackageOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>TIPackage</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCXds100InterfaceList</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>BoardFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/iar/ant_frequency_agility_tx_pca10040_s212.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/iar/ant_frequency_agility_tx_pca10040_s212.ewp
new file mode 100644
index 0000000..f532eb6
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/iar/ant_frequency_agility_tx_pca10040_s212.ewp
@@ -0,0 +1,1083 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+
+<project>
+  <fileVersion>2</fileVersion>  <configuration>
+    <name>nrf52832_xxaa</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>_build</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>34</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.10.3.52260</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.2.7418</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>nrf52832_xxaa	nRF52832_xxAA</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+      <name>ADefines</name>
+          <state>BOARD_PCA10040</state>
+          <state>CONFIG_GPIO_AS_PINRESET</state>
+          <state>FLOAT_ABI_HARD</state>
+          <state>NRF52</state>
+          <state>NRF52832_XXAA</state>
+          <state>NRF52_PAN_74</state>
+          <state>S212</state>
+          <state>SOFTDEVICE_PRESENT</state>
+          <state>SWI_DISABLE0</state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..\..\..\config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_search_config</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state>
+          <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state>
+          <state>$PROJ_DIR$\..\config</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ant_frequency_agility_tx_pca10040_s212.hex</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ant_frequency_agility_tx_pca10040_s212.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+      <state>$PROJ_DIR$\ant_frequency_agility_tx_iar_nRF5x.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>  <group>
+  <name>nRF_Log</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name>    </file>  </group>  <group>
+  <name>Board Definition</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name>    </file>  </group>  <group>
+  <name>nRF_Libraries</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\button\app_button.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\nrf52\handler\hardfault_handler_iar.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\hardfault\hardfault_implementation.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name>    </file>  </group>  <group>
+  <name>nRF_Drivers</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\prs\nrfx_prs.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uart.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_uarte.c</name>    </file>  </group>  <group>
+  <name>nRF_ANT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_channel_config\ant_channel_config.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\ant\ant_search_config\ant_search_config.c</name>    </file>  </group>  <group>
+  <name>Board Support</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</name>    </file>  </group>  <group>
+  <name>Application</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\ant_frequency_agility_tx.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\main.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\config\sdk_config.h</name>    </file>  </group>  <group>
+  <name>nRF_Segger_RTT</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name>    </file>  </group>  <group>
+  <name>None</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52.s</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</name>    </file>  </group>  <group>
+  <name>nRF_SoftDevice</name>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</name>    </file>    <file>
+    <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</name>    </file>  </group></project>
+
+
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/ses/ant_frequency_agility_tx_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/ses/ant_frequency_agility_tx_pca10040_s212.emProject
new file mode 100644
index 0000000..5372d8c
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/ses/ant_frequency_agility_tx_pca10040_s212.emProject
@@ -0,0 +1,110 @@
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="ant_frequency_agility_tx_pca10040_s212" target="8" version="2">
+  <project Name="ant_frequency_agility_tx_pca10040_s212">
+    <configuration
+      Name="Common"
+      arm_architecture="v7EM"
+      arm_core_type="Cortex-M4"
+      arm_endian="Little"
+      arm_fp_abi="Hard"
+      arm_fpu_type="FPv4-SP-D16"
+      arm_linker_heap_size="8192"
+      arm_linker_process_stack_size="0"
+      arm_linker_stack_size="8192"
+      arm_linker_treat_warnings_as_errors="No"
+      arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD"
+      arm_target_device_name="nRF52832_xxAA"
+      arm_target_interface_type="SWD"
+      c_user_include_directories="../../../config;../../../../../../../../components;../../../../../../../../components/ant/ant_channel_config;../../../../../../../../components/ant/ant_search_config;../../../../../../../../components/boards;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/bsp;../../../../../../../../components/libraries/button;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/hardfault;../../../../../../../../components/libraries/hardfault/nrf52;../../../../../../../../components/libraries/scheduler;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/timer;../../../../../../../../components/libraries/util;../../../../../../../../components/softdevice/common;../../../../../../../../components/softdevice/s212/headers;../../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../../components/toolchain/cmsis/include;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;"
+      c_preprocessor_definitions="BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;"
+      debug_target_connection="J-Link"
+      gcc_entry_point="Reset_Handler"
+      macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar"
+      debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52.svd"
+      debug_start_from_entry_point_symbol="No"
+      gcc_debugging_level="Level 3"      linker_output_format="hex"
+      linker_printf_width_precision_supported="Yes"
+      linker_printf_fmt_level="long"
+      linker_section_placement_file="flash_placement.xml"
+      linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x12000;FLASH_SIZE=0x6e000;RAM_START=0x20000b80;RAM_SIZE=0xf480"
+      linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"
+      project_directory=""
+      project_type="Executable" />
+      <folder Name="Segger Startup Files">
+        <file file_name="$(StudioDir)/source/thumb_crt0.s" />
+      </folder>
+    <folder Name="nRF_Log">
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_uart.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" />
+    </folder>
+    <folder Name="Board Definition">
+      <file file_name="../../../../../../../../components/boards/boards.c" />
+    </folder>
+    <folder Name="nRF_Libraries">
+      <file file_name="../../../../../../../../components/libraries/button/app_button.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" />
+      <file file_name="../../../../../../../../components/libraries/scheduler/app_scheduler.c" />
+      <file file_name="../../../../../../../../components/libraries/timer/app_timer.c" />
+      <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/nrf52/handler/hardfault_handler_gcc.c" />
+      <file file_name="../../../../../../../../components/libraries/hardfault/hardfault_implementation.c" />
+      <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" />
+      <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" />
+      <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" />
+      <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" />
+      <file file_name="../../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" />
+      <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" />
+    </folder>
+    <folder Name="nRF_Drivers">
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_clock.c" />
+      <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_clock.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_power_clock.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/prs/nrfx_prs.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uart.c" />
+      <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_uarte.c" />
+    </folder>
+    <folder Name="nRF_ANT">
+      <file file_name="../../../../../../../../components/ant/ant_channel_config/ant_channel_config.c" />
+      <file file_name="../../../../../../../../components/ant/ant_search_config/ant_search_config.c" />
+    </folder>
+    <folder Name="Board Support">
+      <file file_name="../../../../../../../../components/libraries/bsp/bsp.c" />
+    </folder>
+    <folder Name="Application">
+      <file file_name="../../../ant_frequency_agility_tx.c" />
+      <file file_name="../../../main.c" />
+      <file file_name="../config/sdk_config.h" />
+    </folder>
+    <folder Name="nRF_Segger_RTT">
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" />
+      <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" />
+    </folder>
+    <folder Name="None">
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" />
+      <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52.c" />
+    </folder>
+    <folder Name="nRF_SoftDevice">
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_ant.c" />
+      <file file_name="../../../../../../../../components/softdevice/common/nrf_sdh_soc.c" />
+    </folder>
+  </project>
+  <configuration Name="Release"
+    c_preprocessor_definitions="NDEBUG"
+    gcc_optimization_level="Optimize For Size" />
+  <configuration Name="Debug"
+    c_preprocessor_definitions="DEBUG; DEBUG_NRF"
+    gcc_optimization_level="None"/>
+</solution>
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/ses/ant_frequency_agility_tx_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/ses/ant_frequency_agility_tx_pca10040_s212.emSession
new file mode 100644
index 0000000..a828f2b
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/ses/ant_frequency_agility_tx_pca10040_s212.emSession
@@ -0,0 +1,7 @@
+<!DOCTYPE CrossStudio_Session_File>
+<session>
+  <ARMCrossStudioWindow activeProject="ant_frequency_agility_tx_pca10040_s212" buildConfiguration="Release"/>
+  <Files>
+    <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/>
+  </Files>
+</session>
\ No newline at end of file
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/ses/flash_placement.xml
new file mode 100644
index 0000000..737f8f3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ant/experimental/ant_frequency_agility/ant_frequency_agility_tx/pca10040/s212/ses/flash_placement.xml
@@ -0,0 +1,42 @@
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+  <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" />
+    <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" />
+    <ProgramSection alignment="4" load="Yes" name=".init" />
+    <ProgramSection alignment="4" load="Yes" name=".init_rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".text" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" />
+    <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data"  inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/>
+    <ProgramSection alignment="4" load="Yes" name=".dtors" />
+    <ProgramSection alignment="4" load="Yes" name=".ctors" />
+    <ProgramSection alignment="4" load="Yes" name=".rodata" />
+    <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
+    <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
+    <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
+    <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
+  </MemorySegment>
+  <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)">
+    <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" />
+    <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/>
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" />
+    <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" />
+    <ProgramSection alignment="4" load="No" name=".fast_run" />
+    <ProgramSection alignment="4" load="No" name=".data_run" />
+    <ProgramSection alignment="4" load="No" name=".tdata_run" />
+    <ProgramSection alignment="4" load="No" name=".bss" />
+    <ProgramSection alignment="4" load="No" name=".tbss" />
+    <ProgramSection alignment="4" load="No" name=".non_init" />
+    <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
+    <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack"  address_symbol="__StackLimit" end_symbol="__StackTop"/>
+    <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
+  </MemorySegment>
+</Root>